Professional Documents
Culture Documents
How To Start The Model From Scratch
How To Start The Model From Scratch
How To Start The Model From Scratch
1. Get the Coordinates of lot boundary, and setting out of gridline in the lot
Para makita mo na kaagad saan location ng mga gridlines sa lote
2. Ayusin na yung lot base sa true north, para naka set na ito once kuhain yung mga coordinates ng
bldg.
3. Set-out na mga columns
Note: Size ng column dapat reference is structural column schedule, Setting-out ng Column
(location nya) base dapat sa archi plans na column setting-out.
If wala nitong column setting-out sa FCD, need ito irequest sa consultant, otherwise mali mali
ang location ng column
Note: Kunin ang model ng column kay Struct or kay BIM, then saka icheck yung mga setting out
ng columns.
4. Next is, layout the building perimeter, check dimensions ng building perimeter from gridlines.
Then if okay na, saka mag model ng interior layout
Note: Hingin na din ung model ng structural para malink na yung slab at beams sa model.
5. Unahin mga wall partitions. Make sure na yung interior dimensions ng kada room ang masunod,
if there will be discrepancy, RFI agad para si consultant mag decide what to do.
7. Model na din yung floor at Ceiling, per room na lang para sa tagging per room din
Note: While nagmomodel, if may makitang discrepancy for example yung beam depth is
lumabas na beyond ceiling height, need ito i-RFI para si consultant ulit mag decide
9. Other things na need imodel – Roof Structure, Toilet Details (like fixtures and accessories), etc.
10. For Buildings na multi-level. Then always check floor to floor height from FCD.
WHICH IS WHICH
Sa mga deliverable, usually may conflicts kung sino mag govern per trades.