The document describes the configuration of routers and switches to establish connectivity between sites PNH-HN and PNH-HCM. Router interfaces are configured with IP addresses and VLANs are configured on the WAN switch to connect the router interfaces. NAT and DHCP services are configured to allow internal clients to access the Internet. A GRE tunnel is configured between the routers to connect their internal networks. The connectivity is verified through ping tests. Interface status is adjusted to observe the impact on routing tables.
The document describes the configuration of routers and switches to establish connectivity between sites PNH-HN and PNH-HCM. Router interfaces are configured with IP addresses and VLANs are configured on the WAN switch to connect the router interfaces. NAT and DHCP services are configured to allow internal clients to access the Internet. A GRE tunnel is configured between the routers to connect their internal networks. The connectivity is verified through ping tests. Interface status is adjusted to observe the impact on routing tables.
The document describes the configuration of routers and switches to establish connectivity between sites PNH-HN and PNH-HCM. Router interfaces are configured with IP addresses and VLANs are configured on the WAN switch to connect the router interfaces. NAT and DHCP services are configured to allow internal clients to access the Internet. A GRE tunnel is configured between the routers to connect their internal networks. The connectivity is verified through ping tests. Interface status is adjusted to observe the impact on routing tables.
The document describes the configuration of routers and switches to establish connectivity between sites PNH-HN and PNH-HCM. Router interfaces are configured with IP addresses and VLANs are configured on the WAN switch to connect the router interfaces. NAT and DHCP services are configured to allow internal clients to access the Internet. A GRE tunnel is configured between the routers to connect their internal networks. The connectivity is verified through ping tests. Interface status is adjusted to observe the impact on routing tables.