Professional Documents
Culture Documents
JHA - Installation of Air Compressor
JHA - Installation of Air Compressor
JHA Reference No.: EDE/AC/22 JHA Review No.: JHA REV 1.0 :7 SEPT 2022
Predetermined JHA shall be verified and reviewed on site every day before performing the work
2 Site setup 2.1 Slip, trip and fall 2.1.1 Practice good housekeeping
2.1.2 Proper barricades and signages are placed at
work area.
2.1.3 Briefing on Manual Handling and conduct
LMRA
2.2 Back pain 2.2.1 Manual lifting to be carried out using
buddy System and using trolley or other
mechanical lifting equipment
3 Remove and install air compressor 3.1 Sharp Edge & Surface 3.1.1 Wear Cut Resistant hand glove/cotton glove
3.2 Air pressure shoot out/electrocution 3.2.1 Conduct LOTOTO to isolate the energy
(electrical & pressure)
3.2.2 Wear safety glasses
3.2.3 Wear ear plug if needs
3.3 Physical Effort 3.3.1 Briefing on Manual Handling
Do not lifting or loading any items over
25kg by individual without assistance,
consider using trolley or other mechanical
means.
3.3.2 Use of pallet jack to transport from one site to
another site
3.4 Misuse or use of non-approved tools and 3.4.1 Use of proper tools & equipment
equipment
3.5 Slip, trips & falls 3.5.1 Practice good housekeeping
3.5.2 Wear anti-slip safety shoes
3.5.3 Conduct LMRA
7 To connect back wiring and pipe fittings 7.1 Sharp Edge & Surface 7.1.1 Wear Cut Resistant hand glove/cotton glove
7.1.2 Conduct LMRA
7.2 Electrocution 7.2.1 LOTOTO applied
8 Leak testing 8.2 Noise 8.2.1 Ear plug
8.3 Compressed air 8.3.1 Release air before any dismantle work
9 Housekeeping 9.1 Slip, trips & falls 9.1.1 Practice good housekeeping
9.1.2 Wear anti-slip safety shoes
9.1.3 Conduct LMRA