Professional Documents
Culture Documents
1.0-IR For Hydrotesting of Cascade Cylinders-255-60-49-01.07.2023 To 07.07.2023
1.0-IR For Hydrotesting of Cascade Cylinders-255-60-49-01.07.2023 To 07.07.2023
INSPECTION REPORT
Client M/s. Think Gas Begusarai Pvt. Ltd. Vendor M/s. Green Tech Cylinder Testing Co.
Hertz P.O. No. 5600000841/R, Date:-18/08/2022 Vendor P.O. No. 5500001111/R1 Dated 12/06/2023
Khasra No. 1013, Village-Morta, Post-Ator Nagla,
Project Not Applicable. Inspection address Rajnagar Extension Road, Ghaziabad, Uttar
Pradesh-201005
Inspection report No. TGBPL/GTCTCPL/MUNNA/07-23/002 Date of Report 20/07/2023
Inspection done at above location, where Inspection carried out 10% per cascade as per approved QAP for Hydro
testing of CNG Cascade Cylinders (EKCK/THINK GAS/60/255-46). Inspection found accepted as per approved QAP and
Inspection Summary :
Gas Cylinder Rules 2008.
INSPECTION REPORT
WITNESSED REPORTS M/s. Think Gas Begusarai Pvt. Ltd. M/s. Green Tech Cylinder Testing Co.
Document No. Rev. No. If applicable Name of Document
Witness Report for Thickness Measurement of CNG Cylinders, Hydro Testing of CNG Cylinders,
N.A. N.A. Shot Blasting, Primer Coating & Paint Coating for CNG Cylinder, Pneumatic Testing of CNG
Cylinders
INSPECTION ACTIVITIES :
ACTIVITIES WITNESSED BY INSPECTOR
Qty Inspected / ID No. Description of item Description of Activity Pass/Fail/Remark
60 Nos. of Cylinders
included in Cascade No.
Pneumatic test 255 Bar 30 Minute 194212 Satisfactory
EKCK/THINK
GAS/60/255-49
VISUAL INSPECTION
Qty inspected / ID No. Description of Item Result Inspector's Observation
60 Nos. of Cylinders included in
Cascade No. EKCK/THINK CNG Cascade Cylinders Satisfactory Visual Inspection carried out for CNG Cascade and
GAS/60/255-49 It was found satisfactory.
DIMENSION VERIFICATION :
Satisfactory / Non
Qty inspected / ID No. Description of Item Satisfactory / Not Which dimensions checked ( e.g. O.D., thickness)
Applicable
Dimesinsion verification not applicable for this item
OTHER INSPECTION ACTIVITIES CARRIED OUT : Not Applicable
LIST AND CALIBRATION DETAILS OF MEASURING EQUIPMENT USED :
INSPECTION REPORT
Pressure
M/s.Gauge
Think(Master
Gas Begusarai Pvt. Ltd. M/s. Green Tech Cylinder Testing Co.
6DA71162 0 to 700 Bar 11.02.2023
12 Gauge)
13 Pressure Gauge PIPL-14030026 0 to 600 Bar 11.02.2023
14 Pressure Gauge PIPL-14032518 0 to 600 Bar 11.02.2023
NON CONFORMITY : Nill
CONCLUSION : Based on above mentioned inspection activities, inspected items are found satisfactory.
IDENTIFICATION OF INSPECTED ITEMS/ MARKING OF INSPECTION :
Inspected items are identified with sticker of Hertz as with Signature of Inspection Engineer.
ENCLOSURES :
SR.NO. DOCUMENT NO. REV. No. NAME OF DOCUMENT
Calibration Certificate
1 N.A. Calibration Certificate for Pressure Gauge
No. PCTS/PG/29415
Calibration Certificate
2 N.A. Calibration Certificate for Pressure Gauge
No. PCTS/PG/29416
Calibration Certificate
3 N.A. Calibration Certificate for Pressure Gauge
No. PCTS/PG/29417
Calibration Certificate
4 N.A. Calibration Certificate for Pressure Gauge
No. PCTS/PG/29419
Calibration Certificate
5 N.A. Calibration Certificate for Pressure Gauge
No. PCTS/WBAL/29414
Calibration Certificate
6 N.A. Calibration Certificate for Thread Ring Gauge
No. 3/4908/03
Calibration Certificate
7 N.A. Calibration Certificate for Coating Thickness Gauge
No. 2023/179
Calibration Certificate
8 N.A. Calibration Certificate for Pressure Gauge
No. ACS/PRG/501314
Calibration Certificate
9 N.A. Calibration Certificate for Ultrasonic Thickness Gauge
No. ACS/UTG/501316
Calibration Certificate
10 N.A. Calibration Certificate for Digital Weighing Balance
No. ACS/WBAL/501317
Calibration Certificate
11 N.A. Calibration Certificate for Pressure Gauge (Master Gauge)
No. ACS/PRG/501310
Calibration Certificate
12 N.A. Calibration Certificate for Pressure Gauge (Master Gauge)
No. ACS/PRG/501311
Calibration Certificate
13 N.A. Calibration Certificate for Pressure Gauge
No. ACS/PRG/501312
Calibration Certificate
14 N.A. Calibration Certificate for Pressure Gauge
No. ACS/PRG/501313
INSPECTION REPORT
M/s.Report
Witness Think Gas
for Begusarai
6 Pvt. Ltd. M/s. Green Tech Cylinder Testing Co.
Nos. of Cylinders
Witness Report for 6 Nos. of Cylinders included in Cascade No.
17 included in Cascade No. N.A.
EKCK/THINK GAS/60/255-46
EKCK/THINK
GAS/60/255-46
Inspection Engineer Mr. Munna Ansari Approved By Mr. Jignesh Darji
Wall Thickness of CNG Cascade Cylinder Pneumatic Testing of CNG Cascade Cylinder
Hydro Test check of CNG Cascade Cylinder Surface Preparation checked of CNG Cascade Cylinder
---End of Report---