Professional Documents
Culture Documents
Power System Analysis and Design 6th Edition Glover Test Bank Download
Power System Analysis and Design 6th Edition Glover Test Bank Download
Power System Analysis and Design 6th Edition Glover Test Bank Download
Quiz 3
ECE 476
Name:‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗
A generator bus (slack bus) supplies a 100 MW, 50 Mvar load through a lossless transmission line with
parameters on 100 MVA base below. Also, there is a 10 Mvar shunt capacitor at the load bus.
X per unit: 0.2 & B per unit: 0.2
−�4.9 �5
𝑌���𝑠 = [ �5 ]
−�4.8
2. Calculate the voltage magnitude and angle at the load bus using the Newton-Rapson method. Use the
flat-start. Provide the values after 2 iterations. General power balance equations are given below.
𝑛
�� = ∑|𝑉� ||𝑉� |(���� ��������� + ����
�������� ) = �𝐺� − �𝐷�
�=1
𝑛
0.9348 × 5 0.0714
��(�� +
sin(−0.2)
(1)
1) = [
]=[ ]
0.9348 × −5 cos(−0.2) + 0.93482 (4.8) + 0.5 0.1137
5(0.9348) cos(−0.2) 5
��(�� (1)
sin(−0.2) ) = [ ] = [ 4.5808 −0.9933
]
5(0.9348) sin(−0.2) −5 cos(−0.2) + 9.6(0.9348) −0.9286 4.0737
−1
4.58 −0.9933 0.0714 −0.2228
�� (2)
−0.2 =[
0
]−[ ] [ ]=[ ]
0.9348 −0.9286 4.0737 .1137 0.9017
∴ 𝑉2 = 0.9017∠ − 12.765°