Professional Documents
Culture Documents
Guía Torneado
Guía Torneado
Guía Torneado
Turning External
Application overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-80
Internal
Application overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 81-83
Toolholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-111
Cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112-132
Inserts
Turning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-175
Secomax, PCBN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176-195
Secomax, PCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196-206
1
Alphanumeric index
2
Alphanumeric index
3
Alphanumeric index
CFHN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 L
CFIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 LCGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224, 225, 226
CFIR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208, 209, 212, 213 LCMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220, 222, 223
CFJN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 LCMR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220, 222, 223
CFKN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218, 219 LNUX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
CFLN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
M
CFMN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
CFMR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210, 211 MCFNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CFNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 MCGNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CFON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 MCKNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CGIR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 MCLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11, 112
CIIR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 MCMNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CNGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 MCRNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CNGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 MDJNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17
CNGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 MDPNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CNMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 MDQNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CNMG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 MRGNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
CNMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 MRGOR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CNMN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 MSDNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 MSKNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
CNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265, 266, 268, 282, 283 MSKNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 113
CNR/L...-H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 MSRNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24, 25, 114
CNR/L..API . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 MSSNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
CPGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 MSSNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 115
CPGW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 MSTNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116, 125
CPMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 MSYNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116, 125
CRDNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MTCNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
CRGNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MTENNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CSDNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 MTFNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
CSDPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 MTFNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 117
CSKNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 MTGNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32, 33, 118
CSKPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 MTJNRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
CSRPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 MTLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
CSRPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 MTRNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
CSSPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 127 MTWNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
CSSPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 MVJNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CTCPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 MVLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
CTCPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 MVTNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
CTEOR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 MWLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
CTFNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 P
CTFPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 PCKNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
CTFPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65, 121, 122 PCLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
CTGPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 PDJNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CTGPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 PDLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
CTJNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 PDPNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
CTRPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 PDQNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CTWPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 PROON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
D PSBPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
DCMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 PSDPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
DCMW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180, 198 PSKPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
DNGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 PSSPR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
DNGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 PSYNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
DNGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 PTAPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
DNGP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 PTBPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
DNMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 PTCPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
DNMG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 PTEPNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
DNMM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 PTFNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
DNMN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 PTFPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
DNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 PTGPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
DPGW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 PTJPRS/LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
DPMT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 PTLNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
PVJNR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
E PVXNR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
E..-SCLCR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
R
E..-STFCR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
E..-STUCR/L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 R/L 150.10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
4
Alphanumeric index
5
Application overview – External turning
MCFNR/L 100° MCGNR/L 90° MCLNR/L 95° MCRNR/L 75° MCKNR/L 75° MCMNN 40°
PDJNR/L 93° PDQNR/L 107.5° MDJNR/L 93° MDQNR/L 107.5° PDPNN 62.5° MDPNN 62.5°
MRGNR/L MRGOR/L MSRNR/L 75° MSKNR/L 75° MSSNR/L 45° MSDNN/L 45°
MTLNR/L 95° MTJNRS/LS 93° MTGNR/L 90° MTWNR/L 80° MTRNR/L 75° MTENNS 60°
MTFNR/L 90° MTCNN 90° MVLNR/L 95° MVTNR/L 117.5° PVJNR/L 93° MVJNR/L 93°
MWLNR/L 95° SCLCR/L 95° SCFCR/L 90° SCGCR/L 90° SCMCN 50° SCRCR/L 75°
6
Application overview – External turning
SDJCR/L 93° SDPCN 62.5° SRDCN SRGCR/L SSDCN 45° STFCR/L 90°
STGCR/L 90° STDCR/L 45° SVLBR/L 95° SVVBN 72.5° TRAOR/L TROON
TRGOR/L CCLPR/L 95° CSRPR/L 75° CSSPR/L 45° CSDPN 45° CTGPR/L 90°
CTRPR/L 75° CTWPR 80° CTEOR/L 60° CTFPR/L 90° CTCPR/L 90° CTCPN 90°
PROON PSBPRS/LS 75° PSSPR/L 45° PSDPN 45° PSKPRS/LS 75° PTGPRS/LS 90°
PTJPRS/LS 93° PTAPRS/LS 90° PTBPRS/LS 75° PTEPNS 60° PTCPN 90° PTFPRS/LS 90°
7
Application overview – External turning
CCLNR/L 95° CRGNR/L CRDNN CSDNN 45° CSKNR/L 75° CTJNR/L 93°
CTFNR/L 90°
page 80
8
Turning - Toolholders, external
Toolholders for inserts CNGA, CNGN, CNGP, CNMA, CNMG, CNMM, CNMN and CNMP
MCFNR/L MCGNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
100°
1/2 MCFNR -16-4D 1.00 1.00 6 1.25 1.25 -5 -5 1.7 CNMG 432
MCFNL -16-4D 1.00 1.00 6 1.25 1.25 -5 -5 1.7 CNMG 432
90°
1/2 MCGNR -16-4D 1.00 1.00 6 1.25 1.25 -5 -5 1.7 CNMG 432
MCGNL -16-4D 1.00 1.00 6 1.25 1.25 -5 -5 1.7 CNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
9
Turning - Toolholders, external
Toolholders for inserts CNGA, CNGN, CNGP, CNMA, CNMG, CNMM, CNMN and CNMP
MCLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
95°
1/2 MCLNR -12-4B .750 .750 4.5 1.00 1.20 -6 -6 0.7 CNMG 432
-16-4C 1.00 1.00 5 1.25 1.20 -6 -6 1.4 CNMG 432
-16-4D 1.00 1.00 6 1.25 1.20 -6 -6 1.7 CNMG 432
-20-4D 1.25 1.25 6 1.50 1.20 -6 -6 2.7 CNMG 432
-24-4D 1.50 1.50 6 2.00 1.20 -6 -6 3.8 CNMG 432
-85-4D 1.25 1.00 6 1.25 1.20 -6 -6 2.1 CNMG 432
MCLNL -12-4B .750 .750 4.5 1.00 1.20 -6 -6 0.7 CNMG 432
-16-4C 1.00 1.00 5 1.25 1.20 -6 -6 1.4 CNMG 432
-16-4D 1.00 1.00 6 1.25 1.20 -6 -6 1.7 CNMG 432
-20-4D 1.25 1.25 6 1.50 1.20 -6 -6 2.7 CNMG 432
-24-4D 1.50 1.50 6 2.00 1.20 -6 -6 3.8 CNMG 432
-85-4D 1.25 1.00 6 1.25 1.20 -6 -6 2.1 CNMG 432
5/8 MCLNR -16-5C 1.00 1.00 5 1.25 1.37 -6 -6 1.4 CNMG 543
-16-5D 1.00 1.00 6 1.25 1.37 -6 -6 1.7 CNMG 543
-20-5D 1.25 1.25 6 1.50 1.37 -6 -6 2.7 CNMG 543
-85-5D 1.25 1.00 6 1.25 1.37 -6 -6 2.1 CNMG 543
-86-5E 1.50 1.00 7 1.25 1.37 -6 -6 3.0 CNMG 543
MCLNL -16-5C 1.00 1.00 5 1.25 1.37 -6 -6 1.4 CNMG 543
-16-5D 1.00 1.00 6 1.25 1.37 -6 -6 1.7 CNMG 543
-20-5D 1.25 1.25 6 1.50 1.37 -6 -6 2.7 CNMG 543
-86-5E 1.50 1.00 7 1.25 1.37 -6 -6 3.0 CNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
10
Turning - Toolholders, external
Toolholders for inserts CNGP, CNMA, CNMG, CNMM and CNMP
MCLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
95°
3/4 MCLNR -16-6D 1.00 1.00 6 1.25 1.49 -6 -6 1.7 CNMG 643
-20-6D 1.25 1.25 6 1.50 1.49 -6 -6 2.7 CNMG 643
-24-6D 1.50 1.50 6 2.00 1.49 -6 -6 3.8 CNMG 643
-24-6E 1.50 1.50 7 2.00 1.49 -6 -6 4.5 CNMG 643
-85-6D 1.25 1.00 6 1.25 1.49 -6 -6 2.1 CNMG 643
-86-6E 1.50 1.00 7 1.25 1.49 -6 -6 3.0 CNMG 643
MCLNL -16-6D 1.00 1.00 6 1.25 1.49 -6 -6 1.7 CNMG 643
-20-6D 1.25 1.25 6 1.50 1.49 -6 -6 2.7 CNMG 643
-24-6D 1.50 1.50 6 2.00 1.49 -6 -6 3.8 CNMG 643
-24-6E 1.50 1.50 7 2.00 1.49 -6 -6 4.5 CNMG 643
-85-6D 1.25 1.00 6 1.25 1.49 -6 -6 2.1 CNMG 643
-86-6E 1.50 1.00 7 1.25 1.49 -6 -6 3.0 CNMG 643
1.0 MCLNR -24-8E 1.50 1.50 7 2.00 1.51 -6 -6 4.5 CNMG 846
MCLNL -24-8E 1.50 1.50 7 2.00 1.51 -6 -6 4.5 CNMG 846
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
11
Turning - Toolholders, external
Toolholders for inserts CNGP, CNMA, CNMG, CNMM, CNMN and CNMP
MCRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
75°
1/2 MCRNR -12-4B .750 .750 4.5 .750 1.24 -6 -6 0.7 CNMG 432
-16-4C 1.00 1.00 5 1.25 1.24 -6 -6 1.4 CNMG 432
-16-4D 1.00 1.00 6 1.25 1.24 -6 -6 1.7 CNMG 432
-20-4D 1.25 1.25 6 1.50 1.24 -6 -6 3.0 CNMG 432
MCRNL -12-4B .750 .750 4.5 .750 1.24 -6 -6 0.7 CNMG 432
-16-4C 1.00 1.00 5 1.25 1.24 -6 -6 1.4 CNMG 432
-16-4D 1.00 1.00 6 1.25 1.24 -6 -6 1.7 CNMG 432
-20-4D 1.25 1.25 6 1.50 1.24 -6 -6 3.0 CNMG 432
5/8 MCRNR -16-5D 1.00 1.00 6 1.25 1.34 -6 -6 1.7 CNMG 543
-20-5D 1.25 1.25 6 1.50 1.34 -6 -6 2.7 CNMG 543
MCRNL -16-5D 1.00 1.00 6 1.25 1.34 -6 -6 1.7 CNMG 543
-20-5D 1.25 1.25 6 1.50 1.34 -6 -6 2.7 CNMG 543
3/4 MCRNR -20-6D 1.25 1.25 6 1.50 1.49 -6 -6 2.7 CNMG 643
-24-6E 1.50 1.50 7 2.00 1.49 -6 -6 4.5 CNMG 643
MCRNL -20-6D 1.25 1.25 6 1.50 1.49 -6 -6 2.7 CNMG 643
-24-6E 1.50 1.50 7 2.00 1.49 -6 -6 4.5 CNMG 643
-85-6D 1.25 1.00 6 1.25 1.49 -6 -6 2.1 CNMG 643
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
12
Turning - Toolholders, external
Toolholders for inserts CNGP, CNMA, CNMG, CNMM, CNMN and CNMP
MCKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
75°
1/2 MCKNR -12-4B .750 .750 4.5 1.00 1.21 -6 -6 0.7 CNMG 432
-16-4C 1.00 1.00 5 1.25 1.21 -6 -6 1.4 CNMG 432
-16-4D 1.00 1.00 6 1.25 1.21 -6 -6 1.7 CNMG 432
-20-4D 1.25 1.25 6 1.50 1.21 -6 -6 2.7 CNMG 432
MCKNL -12-4B .750 .750 4.5 1.00 1.21 -6 -6 0.7 CNMG 432
-16-4C 1.00 1.00 5 1.25 1.21 -6 -6 1.4 CNMG 432
-16-4D 1.00 1.00 6 1.25 1.21 -6 -6 1.7 CNMG 432
-20-4D 1.25 1.25 6 1.50 1.21 -6 -6 2.7 CNMG 432
5/8 MCKNR -16-5D 1.00 1.00 6 1.25 1.50 -6 -6 1.4 CNMG 543
-20-5D 1.25 1.25 6 1.50 1.50 -6 -6 2.7 CNMG 543
MCKNL -16-5D 1.00 1.00 6 1.25 1.50 -6 -6 1.4 CNMG 543
-20-5D 1.25 1.25 6 1.50 1.50 -6 -6 2.7 CNMG 543
3/4 MCKNR -20-6D 1.25 1.25 6 1.50 1.47 -6 -6 2.7 CNMG 643
-24-6D 1.50 1.50 6 2.00 1.47 -6 -6 3.8 CNMG 643
-24-6E 1.50 1.50 7 2.00 1.47 -6 -6 4.5 CNMG 643
MCKNL -20-6D 1.25 1.25 6 1.50 1.47 -6 -6 2.7 CNMG 643
-24-6D 1.50 1.50 6 2.00 1.47 -6 -6 3.8 CNMG 643
-24-6E 1.50 1.50 7 2.00 1.47 -6 -6 4.5 CNMG 643
U= .123 for 1/2" I.C. .151 for 5/8" I.C. .184 for 3/4" I.C.
Spare Parts, Parts included in delivery
Anvil Pin Clamp Clamp screw Anvil screw* Anvil*
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
13
Turning - Toolholders, external
Toolholders for inserts CNGP, CNMA, CNMG, CNMM, CNMN and CNMP
MCMNN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
40°
1/2 MCMNN -16-4 1.00 1.00 6 .500 1.39 0 -7 1.7 CNMG 432
3/4 MCMNN -20-6 1.25 1.25 7 .625 1.67 0 -7 2.4 CNMG 643
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
14
Turning - Toolholders, external
Toolholders for inserts DNMA, DNMG and DNMP
PDJNR/L PDQNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
93°
3/8 PDJNR -10-3A .625 .625 4.000 1.281 .904 -6 -7 0.4 DNMG 332
-12-3B .750 .750 4.500 1.00 .904 -6 -7 0.7 DNMG 332
-16-3C 1.00 1.00 5.000 1.25 .904 -6 -7 1.4 DNMG 332
PDJNL -10-3A .625 .625 4.000 .875 .904 -6 -7 0.4 DNMG 332
-12-3B .750 .750 4.500 1.00 .904 -6 -7 0.7 DNMG 332
-16-3C 1.00 1.00 5.000 1.25 .904 -6 -7 1.4 DNMG 332
107.5°
3/8 PDQNR -10-3A .625 .625 4.000 .875 .884 -5 -9.5 0.4 DNMG 332
-12-3B .750 .750 4.500 1.00 .884 -5 -9.5 0.7 DNMG 332
-16-3C 1.00 1.00 5.000 1.25 .884 -5 -9.5 1.4 DNMG 332
PDQNL -10-3A .625 .625 4.000 .875 .884 -5 -9.5 0.4 DNMG 332
-12-3B .750 .750 4.500 1.00 .884 -5 -9.5 0.7 DNMG 332
-16-3C 1.00 1.00 5.000 1.25 .884 -5 -9.5 1.4 DNMG 332
Toolholder/
Insert
dimension
15
Turning - Toolholders, external
Toolholders for inserts DNGA, DNGM, DNGN, DNGP, DNMA, DNMG, DNMM, DNMN and DNMP
MDJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
93°
3/8 MDJNR -10-3A .625 .625 4 .875 1.20 -6 -6 0.5 DNMG 332
-12-3B .750 .750 4.5 1.00 1.20 -6 -6 0.6 DNMG 332
-16-3C 1.00 1.00 5 1.25 1.20 -6 -6 1.2 DNMG 332
-16-3D 1.00 1.00 6 1.25 1.20 -6 -6 1.5 DNMG 332
-20-3D 1.25 1.25 6 1.50 1.20 -6 -6 2.4 DNMG 332
MDJNL -10-3A .625 .625 4 .875 1.20 -6 -6 0.5 DNMG 332
-12-3B .750 .750 4.5 1.00 1.20 -6 -6 0.6 DNMG 332
-16-3C 1.00 1.00 5 1.25 1.20 -6 -6 1.2 DNMG 332
-16-3D 1.00 1.00 6 1.25 1.20 -6 -6 1.5 DNMG 332
-20-3D 1.25 1.25 6 1.50 1.20 -6 -6 2.4 DNMG 332
1/2 MDJNR -12-4B .750 .750 4.5 1.00 1.24 -6 -6 0.6 DNMG 432
-16-4C 1.00 1.00 5 1.25 1.24 -6 -6 1.2 DNMG 432
-16-4D 1.00 1.00 6 1.25 1.24 -6 -6 1.5 DNMG 432
-85-4D 1.25 1.00 6 1.25 1.24 -6 -6 1.8 DNMG 432
-20-4D 1.25 1.25 6 1.50 1.24 -6 -6 2.4 DNMG 432
-24-4D 1.50 1.50 6 2.00 1.24 -6 -6 3.5 DNMG 432
MDJNL -12-4B .750 .750 4.5 1.00 1.38 -6 -6 0.6 DNMG 432
-16-4C 1.00 1.00 5 1.25 1.24 -6 -6 1.2 DNMG 432
-16-4D 1.00 1.00 6 1.25 1.24 -6 -6 1.5 DNMG 432
-20-4D 1.25 1.25 6 1.50 1.24 -6 -6 2.4 DNMG 432
-24-4D 1.50 1.50 6 2.00 1.24 -6 -6 3.5 DNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
16
Turning - Toolholders, external
Toolholders for inserts DNMG and DNMP
MDJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
93°
5/8 MDJNR -16-5D 1.00 1.00 6 1.25 1.47 -6 -6 1.5 DNMG 543
-20-5D 1.25 1.25 6 1.50 1.47 -6 -6 2.4 DNMG 543
-24-5D 1.50 1.50 6 2.00 1.47 -6 -6 3.5 DNMG 543
-24-5E 1.50 1.50 7 2.00 1.47 -6 -6 4.2 DNMG 543
-85-5D 1.25 1.00 6 1.25 1.47 -6 -6 1.8 DNMG 543
-86-5E 1.50 1.00 7 1.25 1.47 -6 -6 2.2 DNMG 543
MDJNL -16-5D 1.00 1.00 6 1.25 1.47 -6 -6 1.5 DNMG 543
-20-5D 1.25 1.25 6 1.50 1.47 -6 -6 2.4 DNMG 543
-24-5D 1.50 1.50 6 2.00 1.47 -6 -6 3.5 DNMG 543
-24-5E 1.50 1.50 7 2.00 1.47 -6 -6 4.2 DNMG 543
-85-5D 1.25 1.00 6 1.25 1.47 -6 -6 1.8 DNMG 543
-86-5E 1.50 1.00 7 1.25 1.47 -6 -6 2.2 DNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
17
Turning - Toolholders, external
Toolholders for inserts DNGA, DNGM, DNGN, DNGP, DNMA, DNMG, DNMM, DNMN and DNMP
MDQNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
107.5°
3/8 MDQNR -12-3 .750 .750 4.5 1.00 1.25 -7 -7 0.6 DNMG 332
MDQNL -12-3 .750 .750 4.5 1.00 1.25 -7 -7 0.6 DNMG 332
-16-3 1.00 1.00 6 1.25 1.25 -7 -7 1.5 DNMG 332
1/2 MDQNR -12-4 .750 .750 4.5 1.00 1.50 -7 -7 0.6 DNMG 432
MDQNL -12-4 .750 .750 4.5 1.00 1.50 -7 -7 0.6 DNMG 432
-16-4 1.00 1.00 6 1.25 1.50 -7 -7 1.5 DNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
18
Turning - Toolholders, external
Toolholders for inserts DNMA, DNMG and DNMP
PDPNN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
62.5°
3/8 PDPNN -10-3A .625 .625 4.000 .312 1.155 0 -10 0.4 DNMG 332
-12-3B .750 .750 4.500 .375 1.155 0 -10 0.7 DNMG 332
-16-3C 1.00 1.00 5.000 .500 1.155 0 -10 1.4 DNMG 332
Toolholder/
Insert
dimension
19
Turning - Toolholders, external
Toolholders for inserts DNGA, DNGM, DNGN, DNGP, DNMA, DNMG, DNMM, DNMN and DNMP
MDPNN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
62.5°
3/8 MDPNN -12-3 .750 .750 4.5 .375 1.50 0 -10 0.5 DNMG 332
-16-3 1.00 1.00 6 .500 1.50 0 -10 1.2 DNMG 332
-20-3 1.25 1.25 6 .625 1.50 0 -10 2.4 DNMG 332
1/2 MDPNN -12-4 .750 .750 4.5 .375 1.70 0 -10 0.6 DNMG 432
-16-4D 1.00 1.00 6 .500 1.63 0 -10 1.6 DNMG 432
-20-4 1.25 1.25 6 .625 1.70 0 -10 1.8 DNMG 432
5/8 MDPNN -16-5D 1.00 1.00 6 .500 1.92 0 -10 1.6 DNMG 543
-20-5D 1.25 1.25 6 .625 1.92 0 -10 2.5 DNMG 543
-24-5D 1.50 1.50 6 .750 1.92 0 -10 3.6 DNMG 543
-85-5D 1.25 1.00 6 .500 1.92 0 -10 1.9 DNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
20
Turning
21
Turning - Toolholders, external
Toolholders for inserts RNGN, RNMA, RNMG and RNMN
MRGNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
3/8 MRGNR -12-3B .750 .750 4.5 1.00 .990 -6 -6 0.7 RNMG 32
MRGNL -12-3B .750 .750 4.5 1.00 .990 -6 -6 0.7 RNMG 32
1/2 MRGNR -12-4B .750 .750 4.5 1.00 1.18 -6 -6 0.7 RNMG 43
-16-4D 1.00 1.00 6 1.25 1.18 -6 -6 1.7 RNMG 43
-20-4D 1.25 1.25 6 1.50 1.18 -6 -6 2.7 RNMG 43
-85-4D 1.25 1.00 6 1.25 1.18 -6 -6 2.1 RNMG 43
MRGNL -12-4B .750 .750 4.5 1.00 1.18 -6 -6 0.7 RNMG 43
-16-4D 1.00 1.00 6 1.25 1.18 -6 -6 1.7 RNMG 43
-20-4D 1.25 1.25 6 1.50 1.18 -6 -6 2.7 RNMG 43
-85-4D 1.25 1.00 6 1.25 1.18 -6 -6 2.1 RNMG 43
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
22
Turning - Toolholders, external
Toolholders for insert RCMM
MRGOR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l2 l3 γo° γ p° insert
1/2 MRGOR -85-4D 1.25 1.00 6 1.25 2.40 1.04 0 0 1.7 RCMM 43
MRGOL -85-4D 1.25 1.00 6 1.25 2.40 1.04 0 0 1.7 RCMM 43
5/8 MRGOR -85-5D 1.25 1.00 6 1.25 2.88 1.55 0 0 1.6 RCMM 54
MRGOL -85-5D 1.25 1.00 6 1.25 2.88 1.55 0 0 1.6 RCMM 54
3/4 MRGOR -20-6E 1.25 1.25 7 1.50 3.50 1.80 0 0 2.4 RCMM 64
MRGOL -20-6E 1.25 1.25 7 1.50 3.50 1.80 0 0 2.4 RCMM 64
1.0 MRGOR -24-8E 1.50 1.50 7 2.00 3.93 2.05 0 0 3.4 RCMM 84
MRGOL -24-8E 1.50 1.50 7 2.00 3.93 2.05 0 0 3.4 RCMM 84
Toolholder/
Insert
dimension
23
Turning - Toolholders, external
Toolholders for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU
MSRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
75°
3/8 MSRNR -8-3 .500 .500 4.5 .658 1.06 -6 -6 0.3 SNMG 322
-10-3 .625 .625 4.5 .738 1.06 -6 -6 0.5 SNMG 322
MSRNL -8-3 .500 .500 4.5 .658 1.06 -6 -6 0.3 SNMG 322
-10-3 .625 .625 4.5 .738 1.06 -6 -6 0.5 SNMG 322
1/2 MSRNR -12-4B .750 .750 4.5 .878 1.23 -6 -6 0.7 SNMG 432
-16-4D 1.00 1.00 6 1.128 1.23 -6 -6 1.7 SNMG 432
MSRNL -12-4B .750 .750 4.5 .878 1.23 -6 -6 0.7 SNMG 432
-16-4D 1.00 1.00 6 1.128 1.23 -6 -6 1.7 SNMG 432
5/8 MSRNR -16-5D 1.00 1.00 6 1.100 1.46 -6 -6 1.7 SNMG 543
-20-5D 1.25 1.25 6 1.350 1.46 -6 -6 2.7 SNMG 543
MSRNL -16-5D 1.00 1.00 6 1.100 1.46 -6 -6 1.7 SNMG 543
-20-5D 1.25 1.25 6 1.350 1.46 -6 -6 2.7 SNMG 543
MSRNR -85-5D 1.25 1.00 6 1.100 1.46 -6 -6 2.1 SNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
24
Turning - Toolholders, external
Toolholders for inserts SNG, SNMA, SNMG, SNMM, SNMP and SNU
MSRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
75°
3/4 MSRNR -20-6D 1.25 1.25 6 1.318 1.50 -6 -6 2.7 SNMG 643
-24-6E 1.50 1.50 7 1.818 1.50 -6 -6 4.5 SNMG 643
-85-6D 1.25 1.00 6 1.068 1.50 -6 -6 2.1 SNMG 643
MSRNL -20-6D 1.25 1.25 6 1.318 1.50 -6 -6 2.7 SNMG 643
-24-6E 1.50 1.50 7 1.818 1.50 -6 -6 4.5 SNMG 643
-85-6D 1.25 1.00 6 1.068 1.50 -6 -6 2.1 SNMG 643
1.0 MSRNR -24-8 1.50 1.50 7 1.762 1.62 -6 -6 4.5 SNMG 866
MSRNL -24-8 1.50 1.50 7 1.762 1.62 -6 -6 4.5 SNMG 866
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
25
Turning - Toolholders, external
Toolholders for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU
MSKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
75°
3/8 MSKNR -8-3 .500 .500 4.5 .625 1.03 -6 -6 0.3 SNMG 322
MSKNL -12-3 .750 .750 4.5 .875 1.03 -6 -6 0.7 SNMG 322
1/2 MSKNR -12-4B .750 .750 4.5 1.00 1.25 -6 -6 0.7 SNMG 432
-16-4D 1.00 1.00 6 1.25 1.25 -6 -6 1.7 SNMG 432
-85-4 1.25 1.00 6 1.25 1.25 -6 -6 2.1 SNMG 432
MSKNL -12-4B .750 .750 4.5 1.00 1.25 -6 -6 0.7 SNMG 432
-16-4D 1.00 1.00 6 1.25 1.25 -6 -6 1.7 SNMG 432
5/8 MSKNR -16-5D 1.00 1.00 6 1.25 1.44 -6 -6 1.7 SNMG 543
-20-5D 1.25 1.25 6 1.50 1.44 -6 -6 2.7 SNMG 543
MSKNL -16-5D 1.00 1.00 6 1.25 1.44 -6 -6 1.7 SNMG 543
-20-5D 1.25 1.25 6 1.50 1.44 -6 -6 2.7 SNMG 543
3/4 MSKNR -20-6D 1.25 1.25 6 1.50 1.56 -6 -6 2.7 SNMG 643
-24-6E 1.50 1.50 7 2.00 1.56 -6 -6 4.5 SNMG 643
MSKNL -20-6D 1.25 1.25 6 1.50 1.56 -6 -6 2.7 SNMG 643
-24-6E 1.50 1.50 7 2.00 1.56 -6 -6 4.5 SNMG 643
1.0 MSKNR -24-8 1.50 1.50 7 2.00 1.97 -6 -6 4.5 SNMG 866
MSKNL -24-8 1.50 1.50 7 2.00 1.97 -6 -6 4.5 SNMG 866
U dim. = .090 for 3/8" I.C. .123 for 1/2" I.C. .151 for 5/8" I.C. .184 for 3/4" I.C. .237 for 1" I.C.
Spare Parts, Parts included in delivery
Anvil Pin Clamp Clamp screw Anvil screw* Anvil*
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
26
Turning - Toolholders, external
Toolholders for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU
MSSNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
45°
1/2 MSSNR -12-4B .750 .750 4.5 .662 1.24 -8 0 0.7 SNMG 432
-16-4D 1.00 1.00 6 .912 1.24 -8 0 1.6 SNMG 432
-85-4D 1.25 1.00 6 .912 1.24 -8 0 2 SNMG 432
MSSNL -12-4B .750 .750 4.5 .662 1.24 -8 0 0.7 SNMG 432
-16-4D 1.00 1.00 6 .912 1.24 -8 0 1.6 SNMG 432
-85-4D 1.25 1.00 6 .912 1.24 -8 0 2 SNMG 432
5/8 MSSNR -16-5D 1.00 1.00 6 .828 1.36 -8 0 1.6 SNMG 543
-20-5D 1.25 1.25 6 1.078 1.36 -8 0 2.5 SNMG 543
MSSNL -16-5D 1.00 1.00 6 .828 1.36 -8 0 1.6 SNMG 543
-20-5D 1.25 1.25 6 1.078 1.36 -8 0 2.5 SNMG 543
3/4 MSSNR -20-6D 1.25 1.25 6 .992 1.48 -8 0 2.5 SNMG 643
-24-6E 1.50 1.50 7 1.492 1.48 -8 0 4 SNMG 643
MSSNL -20-6D 1.25 1.25 6 .992 1.48 -8 0 2.5 SNMG 643
-24-6E 1.50 1.50 7 1.492 1.48 -8 0 4 SNMG 643
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
27
Turning - Toolholders, external
Toolholders for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU
MSDNN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
45°
3/8 MSDNN -8-3 .500 .500 4.5 .250 1.14 -6 -6 0.3 SNMG 322
-10-3 .625 .625 4.5 .313 1.14 -6 -6 0.5 SNMG 322
-12-3 .750 .750 4.5 .375 1.14 -6 -6 0.9 SNMG 322
1/2 MSDNN -12-4 .750 .750 4.5 .375 1.39 -6 -6 0.9 SNMG 432
-16-4 1.00 1.00 6 .500 1.39 -6 -6 1.6 SNMG 432
-85-4 1.25 1.00 6 .500 1.39 -6 -6 2.0 SNMG 432
5/8 MSDNN -16-5 1.00 1.00 6 .500 1.61 -6 -6 1.6 SNMG 543
-20-5 1.25 1.25 7 .625 1.61 -6 -6 3.0 SNMG 543
-85-5 1.25 1.00 6 .500 1.61 -6 -6 2.0 SNMG 543
3/4 MSDNN -20-6 1.25 1.25 7 .625 1.73 -6 -6 3.0 SNMG 643
-24-6 1.50 1.50 7 .750 1.73 -6 -6 4.2 SNMG 643
-85-6 1.25 1.00 6 .500 1.73 -6 -6 2.0 SNMG 643
1.0 MSDNN -24-8 1.50 1.50 7 .750 2.24 -6 -6 4.2 SNMG 866
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
28
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
95°
1/2 MTLNR -16-4 1.00 1.00 6 1.25 1.28 -5 -5 1.7 TNMG 432
-20-4 1.25 1.25 7 1.50 1.28 -5 -5 2.9 TNMG 432
MTLNL -16-4 1.00 1.00 6 1.25 1.28 -5 -5 1.7 TNMG 432
-20-4 1.25 1.25 7 1.50 1.28 -5 -5 2.9 TNMG 432
5/8 MTLNR -20-5 1.25 1.25 7 1.50 1.40 -5 -5 2.8 TNMG 543
-24-5 1.50 1.50 7 2.00 1.40 -5 -5 4.5 TNMG 543
MTLNL -20-5 1.25 1.25 7 1.50 1.40 -5 -5 2.8 TNMG 543
-24-5 1.50 1.50 7 2.00 1.40 -5 -5 4.5 TNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
29
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTJNRS/LS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
93°
3/8 MTJNRS -12-3 .750 .750 4.5 1.00 1.12 -5 -5 0.7 TNMG 332
-16-3 1.00 1.00 6 1.25 1.12 -5 -5 1.7 TNMG 332
MTJNLS -12-3 .750 .750 4.5 1.00 1.12 -5 -5 0.7 TNMG 332
-16-3 1.00 1.00 6 1.25 1.12 -5 -5 1.7 TNMG 332
1/2 MTJNRS -16-4 1.00 1.00 6 1.25 1.19 -5 -5 1.7 TNMG 432
-20-4 1.25 1.25 7 1.50 1.19 -5 -5 2.9 TNMG 432
-85-4 1.25 1.00 6 1.25 1.19 -5 -5 2.3 TNMG 432
-86-4 1.50 1.00 7 1.25 1.19 -5 -5 3.0 TNMG 432
MTJNLS -16-4 1.00 1.00 6 1.25 1.19 -5 -5 1.7 TNMG 432
-20-4 1.25 1.25 7 1.50 1.19 -5 -5 2.9 TNMG 432
-85-4 1.25 1.00 6 1.25 1.19 -5 -5 2.3 TNMG 432
5/8 MTJNRS -20-5 1.25 1.25 7 1.50 1.44 -5 -5 2.8 TNMG 543
-24-5 1.50 1.50 7 2.00 1.44 -5 -5 4.5 TNMG 543
-86-5 1.50 1.00 7 1.25 1.44 -5 -5 3.0 TNMG 543
MTJNLS -20-5 1.25 1.25 7 1.50 1.44 -5 -5 2.8 TNMG 543
-24-5 1.50 1.50 7 2.00 1.44 -5 -5 4.5 TNMG 543
-86-5 1.50 1.00 7 1.25 1.44 -5 -5 3.0 TNMG 543
3/4 MTJNRS -24-6 1.50 1.50 7 2.00 1.67 -5 -5 4.5 TNMG 663
MTJNLS -24-6 1.50 1.50 7 2.00 1.67 -5 -5 4.5 TNMG 663
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
30
Turning
31
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTGNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
90°
1/4 MTGNR -8-2A .500 .500 4 .625 .960 -5 -5 0.3 TNMG 221
-10-2A .625 .625 4 .750 .960 -5 -5 0.4 TNMG 221
MTGNL -8-2A .500 .500 4 .625 .960 -5 -5 0.3 TNMG 221
-10-2A .625 .625 4 .750 .960 -5 -5 0.4 TNMG 221
3/8 MTGNR -10-3A .625 .625 4 .875 1.12 -5 -5 0.4 TNMG 332
-12-3B .750 .750 4.5 1.00 1.12 -5 -5 0.7 TNMG 332
-16-3C 1.00 1.00 5 1.25 1.12 -5 -5 1.4 TNMG 332
MTGNL -10-3A .625 .625 4 .875 1.12 -5 -5 0.4 TNMG 332
-12-3B .750 .750 4.5 1.00 1.12 -5 -5 0.7 TNMG 332
-16-3C 1.00 1.00 5 1.25 1.12 -5 -5 1.4 TNMG 332
1/2 MTGNR -16-4C 1.00 1.00 5 1.25 1.20 -5 -5 1.4 TNMG 432
-16-4D 1.00 1.00 6 1.25 1.20 -5 -5 1.7 TNMG 432
-20-4D 1.25 1.25 6 1.50 1.20 -5 -5 2.7 TNMG 432
-85-4D 1.25 1.00 6 1.25 1.20 -5 -5 2.1 TNMG 432
MTGNL -16-4C 1.00 1.00 5 1.25 1.20 -5 -5 1.4 TNMG 432
-16-4D 1.00 1.00 6 1.25 1.20 -5 -5 1.7 TNMG 432
-20-4D 1.25 1.25 6 1.50 1.20 -5 -5 2.7 TNMG 432
-85-4D 1.25 1.00 6 1.25 1.20 -5 -5 2.1 TNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
32
Turning - Toolholders, external
Toolholders for inserts TNMA, TNMG, TNMM and TNMP
MTGNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
90°
5/8 MTGNR -16-5C 1.00 1.00 5 1.25 1.44 -5 -5 1.43 TNMG 543
-16-5D 1.00 1.00 6 1.25 1.44 -5 -5 1.7 TNMG 543
-20-5D 1.25 1.25 6 1.50 1.44 -5 -5 2.7 TNMG 543
-24-5D 1.50 1.50 6 2.00 1.44 -5 -5 3.8 TNMG 543
-24-5E 1.50 1.50 7 2.00 1.44 -5 -5 4.5 TNMG 543
MTGNL -16-5D 1.00 1.00 6 1.25 1.44 -5 -5 1.7 TNMG 543
-20-5D 1.25 1.25 6 1.50 1.44 -5 -5 2.7 TNMG 543
-24-5D 1.50 1.50 6 2.00 1.44 -5 -5 3.8 TNMG 543
-24-5E 1.50 1.50 7 2.00 1.44 -5 -5 4.5 TNMG 543
3/4 MTGNR -24-6D 1.50 1.50 6 2.00 1.50 -5 -5 3.8 TNMG 663
-24-6E 1.50 1.50 7 2.00 1.50 -5 -5 4.5 TNMG 663
MTGNL -24-6E 1.50 1.50 7 2.00 1.50 -5 -5 4.5 TNMG 663
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
33
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTWNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
80°
3/8 MTWNR -12-3 .750 .750 6 .875 1.35 -5 -5 1.0 TNMG 332
MTWNL -12-3 .750 .750 6 .875 1.35 -5 -5 1.0 TNMG 332
1/2 MTWNR -16-4 1.00 1.00 7 1.094 1.75 -5 -5 2.0 TNMG 432
MTWNL -16-4 1.00 1.00 7 1.094 1.75 -5 -5 2.0 TNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
34
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
75°
3/8 MTRNR -10-3 .625 .625 4.5 .722 1.20 -5 -5 0.5 TNMG 332
-12-3 .750 .750 4.5 .847 1.20 -5 -5 0.7 TNMG 332
-16-3 1.00 1.00 6 1.097 1.20 -5 -5 1.6 TNMG 332
MTRNL -10-3 .625 .625 4.5 .722 1.20 -5 -5 0.7 TNMG 332
-12-3 .750 .750 4.5 .847 1.20 -5 -5 0.7 TNMG 332
-16-3 1.00 1.00 6 1.097 1.20 -5 -5 1.6 TNMG 332
1/2 MTRNR -16-4 1.00 1.00 6 1.040 1.24 -5 -5 1.6 TNMG 432
MTRNL -16-4 1.00 1.00 6 1.040 1.24 -5 -5 1.6 TNMG 432
5/8 MTRNR -16-5 1.00 1.00 6 .990 1.62 -5 -5 1.7 TNMG 543
-20-5 1.25 1.25 7 1.240 1.62 -5 -5 3 TNMG 543
-24-5 1.50 1.50 7 1.740 1.62 -5 -5 4.2 TNMG 543
MTRNL -16-5 1.00 1.00 6 .990 1.62 -5 -5 1.7 TNMG 543
-20-5 1.25 1.25 7 1.240 1.62 -5 -5 3 TNMG 543
-24-5 1.50 1.50 7 1.740 1.62 -5 -5 4.2 TNMG 543
3/4 MTRNL -24-6 1.50 1.50 7 1.685 1.68 -5 -5 4.2 TNMG 663
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
35
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTENNS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
60°
1/4 MTENNS -8-2 .500 .500 4.5 .250 .990 0 -10 0.3 TNMG 221
3/8 MTENNS -10-3 .625 .625 4.5 .313 1.16 0 -10 0.5 TNMG 332
-12-3 .750 .750 4.5 .375 1.16 0 -10 0.7 TNMG 332
-64-3 1.00 .750 6 .375 1.16 0 -10 1.2 TNMG 332
-85-3 1.25 1.00 6 .500 1.16 0 -10 2.0 TNMG 332
1/2 MTENNS -12-4 .750 .750 4.5 .375 1.50 0 -10 0.7 TNMG 432
-16-4 1.00 1.00 6 .500 1.50 0 -10 1.6 TNMG 432
-85-4 1.25 1.00 6 .500 1.50 0 -10 2.0 TNMG 432
-86-4 1.50 1.00 7 .500 1.50 0 -10 2.8 TNMG 432
5/8 MTENNS -20-5 1.25 1.25 7 .625 1.64 0 -10 2.9 TNMG 543
-24-5 1.50 1.50 7 .750 1.64 0 -10 4.0 TNMG 543
3/4 MTENNS -24-6 1.50 1.50 7 .750 1.95 0 -10 4.0 TNMG 663
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
36
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTFNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
90°
1/4 MTFNR -8-2 .500 .500 4.5 .750 .820 -5 -6 0.3 TNMG 221
-10-2 .625 .625 4.5 .875 .820 -5 -6 0.5 TNMG 221
MTFNL -8-2 .500 .500 4.5 .750 .820 -5 -6 0.3 TNMG 221
-10-2 .625 .625 4.5 .875 .820 -5 -6 0.5 TNMG 221
3/8 MTFNR -10-3 .625 .625 4.5 .875 .940 -5 -6 0.5 TNMG 332
-12-3B .750 .750 4.5 1.00 .940 -5 -6 0.7 TNMG 332
-16-3C 1.00 1.00 5 1.25 .940 -5 -6 1.4 TNMG 332
-64-3 1.00 .750 6 1.00 .940 -5 -6 1.3 TNMG 332
MTFNL -10-3 .625 .625 4.5 .875 .940 -5 -6 0.5 TNMG 332
-12-3B .750 .750 4.5 1.00 .940 -5 -6 0.7 TNMG 332
-16-3C 1.00 1.00 5 1.25 .940 -5 -6 1.4 TNMG 332
-64-3 1.00 .750 6 1.00 .940 -5 -6 1.3 TNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
37
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM and TNMP
MTFNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
90°
1/2 MTFNR -16-4C 1.00 1.00 5 1.25 1.22 -5 -6 1.4 TNMG 432
-16-4D 1.00 1.00 6 1.25 1.22 -5 -6 1.7 TNMG 432
-20-4D 1.25 1.25 6 1.50 1.22 -5 -6 2.7 TNMG 432
-24-4D 1.50 1.50 6 2.00 1.22 -5 -6 3.8 TNMG 432
-85-4D 1.25 1.00 6 1.25 1.22 -5 -6 2.1 TNMG 432
MTFNL -16-4C 1.00 1.00 5 1.25 1.22 -5 -6 1.4 TNMG 432
-16-4D 1.00 1.00 6 1.25 1.22 -5 -6 1.7 TNMG 432
-20-4D 1.25 1.25 6 1.50 1.22 -5 -6 2.7 TNMG 432
-24-4D 1.50 1.50 6 2.00 1.22 -5 -6 3.8 TNMG 432
-85-4D 1.25 1.00 6 1.25 1.22 -5 -6 2.1 TNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
38
Turning - Toolholders, external
Toolholders for inserts TNMA, TNMG, TNMM and TNMP
MTFNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
90°
5/8 MTFNR -16-5C 1.00 1.00 5 1.25 1.43 -5 -6 1.4 TNMG 543
-16-5D 1.00 1.00 6 1.25 1.43 -5 -6 1.7 TNMG 543
-20-5D 1.25 1.25 6 1.50 1.43 -5 -6 2.7 TNMG 543
-24-5E 1.50 1.50 7 2.00 1.43 -5 -6 4.5 TNMG 543
-85-5D 1.25 1.00 6 1.25 1.43 -5 -6 2.1 TNMG 543
MTFNL -16-5D 1.00 1.00 6 1.25 1.43 -5 -6 1.7 TNMG 543
-20-5D 1.25 1.25 6 1.50 1.43 -5 -6 2.7 TNMG 543
-24-5E 1.50 1.50 7 2.00 1.43 -5 -6 4.5 TNMG 543
-85-5D 1.25 1.00 6 1.25 1.43 -5 -6 2.1 TNMG 543
3/4 MTFNR -24-6D 1.50 1.50 6 2.00 1.49 -5 -6 3.8 TNMG 663
-24-6E 1.50 1.50 7 2.00 1.49 -5 -6 4.5 TNMG 663
MTFNL -24-6D 1.50 1.50 6 2.00 1.49 -5 -6 3.8 TNMG 663
-24-6E 1.50 1.50 7 2.00 1.49 -5 -6 4.5 TNMG 663
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
39
Turning - Toolholders, external
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTCNN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
90°
3/8 MTCNN -44-3 1.00 .500 8 - 1.13 0 -7 1.1 TNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
40
Turning - Toolholders, external
Toolholders for inserts VNGA, VNGM, VNGP, VNMA, VNMG, VNMN and VNMP
MVLNR/L MVTNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
95°
1/2 MVLNR -16-4D 1.00 1.00 6 1.75 1.50 -13 -4 1.7 VNMG 432
-20-4D 1.25 1.25 6 2.00 1.50 -13 -4 2.7 VNMG 432
-24-4E 1.50 1.50 7 2.25 1.50 -13 -4 4.5 VNMG 432
MVLNL -16-4D 1.00 1.00 6 1.75 1.50 -13 -4 1.7 VNMG 432
-20-4D 1.25 1.25 6 2.00 1.50 -13 -4 2.7 VNMG 432
117.5°
3/8 MVTNR -12-3B .750 .750 4.5 1.00 1.71 -4 -13 0.7 VNMG 332
-16-3C 1.00 1.00 5 1.25 1.71 -4 -13 1.3 VNMG 332
-16-3D 1.00 1.00 6 1.25 1.71 -4 -13 1.6 VNMG 332
-20-3D 1.25 1.25 6 1.50 1.71 -4 -13 2.5 VNMG 332
-24-3E 1.50 1.50 7 1.75 1.71 -4 -13 4.1 VNMG 332
MVTNL -12-3B .750 .750 4.5 1.00 1.71 -4 -13 0.7 VNMG 332
-16-3C 1.00 1.00 5 1.25 1.71 -4 -13 1.3 VNMG 332
-16-3D 1.00 1.00 6 1.25 1.71 -4 -13 1.6 VNMG 332
-20-3D 1.25 1.25 6 1.50 1.71 -4 -13 2.5 VNMG 332
-24-3E 1.50 1.50 7 1.75 1.71 -4 -13 4.1 VNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
41
Turning - Toolholders, external
Toolholders for inserts VNMG
PVJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
93°
5/16 PVJNR -10-2.5A .625 .625 4.000 .875 1.179 -4.5 -13.5 0.4 VNMG 2.531
-12-2.5B .750 .750 4.500 1.00 1.328 -4.5 -13.5 0.7 VNMG 2.531
-16-2.5C 1.00 1.00 5.000 1.25 1.648 -4.5 -13.5 1.4 VNMG 2.531
PVJNL -10-2.5A .625 .625 4.000 .875 1.179 -4.5 -13.5 0.4 VNMG 2.531
-12-2.5B .750 .750 4.500 1.00 1.328 -4.5 -13.5 0.7 VNMG 2.531
-16-2.5C 1.00 1.00 5.000 1.25 1.648 -4.5 -13.5 1.4 VNMG 2.531
Toolholder/
Insert
dimension
42
Turning - Toolholders, external
Toolholders for inserts VNGA, VNGM, VNGP, VNMA, VNMG, VNMN and VNMP
MVJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
93°
3/8 MVJNR -12-3B .750 .750 4.5 1.00 1.66 -4 -13 0.6 VNMG 332
-16-3C 1.00 1.00 5 1.25 1.66 -4 -13 1.2 VNMG 332
-16-3D 1.00 1.00 6 1.25 1.66 -4 -13 1.4 VNMG 332
-20-3D 1.25 1.25 6 1.50 1.66 -4 -13 2.2 VNMG 332
MVJNL -12-3B .750 .750 4.5 1.00 1.66 -4 -13 0.6 VNMG 332
-16-3C 1.00 1.00 5 1.25 1.66 -4 -13 1.2 VNMG 332
-16-3D 1.00 1.00 6 1.25 1.66 -4 -13 1.4 VNMG 332
-20-3D 1.25 1.25 6 1.50 1.66 -4 -13 2.2 VNMG 332
1/2 MVJNR -16-4C 1.00 1.00 5 1.25 2.00 -4 -13 1.2 VNMG 432
-16-4D 1.00 1.00 6 1.25 2.00 -4 -13 1.4 VNMG 432
-16-4D-203 1.00 1.00 6 1.25 2.00 -4 -13 1.4 VNMG 432
-20-4D 1.25 1.25 6 1.50 2.00 -4 -13 2.2 VNMG 432
-24-4D 1.50 1.50 6 2.00 2.00 -4 -13 2.8 VNMG 432
-86-4E 1.50 1.00 7 1.25 2.00 -4 -13 2.6 VNMG 432
-86-4E-203 1.50 1.00 7 1.25 2.00 -4 -13 2.6 VNMG 432
MVJNL -16-4C-203 1.00 1.00 5 1.25 2.00 -4 -13 1.2 VNMG 432
-16-4D 1.00 1.00 6 1.25 2.00 -4 -13 1.4 VNMG 432
-20-4D 1.25 1.25 6 1.50 2.00 -4 -13 2.2 VNMG 432
-24-4D 1.50 1.50 6 2.00 2.00 -4 -13 2.8 VNMG 432
-86-4E 1.50 1.00 7 1.25 2.00 -4 -13 2.6 VNMG 432
-86-4E-203 1.50 1.00 7 1.25 2.00 -4 -13 2.6 VNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
Note: Toolholders ending with -203 must use inserts ending with 203 (holesize)
43
Turning - Toolholders, external
Toolholders for inserts WNGP, WNMA, WNMG, WNMM and WNMP
MWLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
95°
3/8 MWLNR -10-3A .625 .625 4 .875 1.20 -5 -6 0.5 WNMG 332
-12-3B .750 .750 4.5 1.00 1.20 -5 -6 0.5 WNMG 332
-16-3C 1.00 1.00 5 1.25 1.20 -5 -6 1.4 WNMG 332
-16-3D 1.00 1.00 6 1.25 1.20 -5 -6 1.7 WNMG 332
-20-3D 1.25 1.25 6 1.50 1.20 -5 -6 2.7 WNMG 332
MWLNL -10-3A .625 .625 4 .875 1.20 -5 -6 0.5 WNMG 332
-12-3B .750 .750 4.5 1.00 1.20 -5 -6 0.7 WNMG 332
-16-3C 1.00 1.00 5 1.25 1.20 -5 -6 1.4 WNMG 332
-16-3D 1.00 1.00 6 1.25 1.20 -5 -6 1.7 WNMG 332
-20-3D 1.25 1.25 6 1.50 1.20 -5 -6 2.7 WNMG 332
1/2 MWLNR -12-4B .750 .750 4.5 1.00 1.20 -5 -6 0.7 WNMG 432
-16-4C 1.00 1.00 5 1.25 1.20 -5 -6 1.4 WNMG 432
-16-4D 1.00 1.00 6 1.25 1.20 -5 -6 1.7 WNMG 432
-20-4D 1.25 1.25 6 1.50 1.20 -5 -6 2.7 WNMG 432
MWLNL -12-4B .750 .750 4.5 1.00 1.20 -5 -6 0.7 WNMG 432
-16-4C 1.00 1.00 5 1.25 1.20 -5 -6 1.4 WNMG 432
-16-4D 1.00 1.00 6 1.25 1.20 -5 -6 1.7 WNMG 432
-20-4D 1.25 1.25 6 1.50 1.20 -5 -6 2.7 WNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
44
Turning - Toolholders, external
Toolholders for inserts CCGW, CCMT and CCMW
SCLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
95°
1/4 SCLCR -6-2 .375 .375 2.5 .500 .490 0 0 0.1 CCMT 21.51
SCLCL -6-2 .375 .375 2.5 .500 .490 0 0 0.1 CCMT 21.51
3/8 SCLCR -8-3 .500 .500 3.5 .625 .690 0 0 0.3 CCMT 32.52
-10-3 .625 .625 4 .750 .690 0 0 0.4 CCMT 32.52
-12-3 .750 .750 4.5 1.000 .690 0 0 0.7 CCMT 32.52
-16-3 1.00 1.00 6 1.250 .670 0 0 1.4 CCMT 32.52
SCLCL -8-3 .500 .500 3.5 .625 .690 0 0 0.3 CCMT 32.52
-10-3 .625 .625 4 .750 .690 0 0 0.4 CCMT 32.52
-12-3 .750 .750 4.5 1.000 .690 0 0 0.7 CCMT 32.52
-16-3 1.00 1.00 6 1.250 .670 0 0 1.4 CCMT 32.52
1/2 SCLCR -12-4 .750 .750 4.5 1.000 .780 0 0 0.7 CCMT 432
-16-4 1.00 1.00 5 1.250 .780 0 0 1.4 CCMT 432
SCLCL -12-4 .750 .750 4.5 1.000 .780 0 0 0.7 CCMT 432
-16-4 1.00 1.00 5 1.250 .780 0 0 1.4 CCMT 432
Toolholder/
Insert
dimension
45
Turning - Toolholders, external
Toolholders for inserts CCGW, CCMT and CCMW
SCFCR/L SCGCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
90°
1/4 SCFCR -6-2 .375 .375 2.5 .500 .490 0 0 0.1 CCMT 21.51
SCFCL -6-2 .375 .375 2.5 .500 .490 0 0 0.1 CCMT 21.51
3/8 SCFCR -8-3 .500 .500 3.5 .625 .650 0 0 0.3 CCMT 32.52
SCFCL -8-3 .500 .500 3.5 .625 .650 0 0 0.3 CCMT 32.52
90°
1/4 SCGCR -6-2 .375 .375 2.5 .500 .490 0 0 0.1 CCMT 21.51
SCGCL -6-2 .375 .375 2.5 .500 .490 0 0 0.1 CCMT 21.51
3/8 SCGCR -8-3 .500 .500 3.5 .625 .620 0 0 0.3 CCMT 32.52
SCGCL -8-3 .500 .500 3.5 .625 .620 0 0 0.3 CCMT 32.52
Toolholder/
Insert
dimension
46
Turning - Toolholders, external
Toolholders for inserts CCGW, CCMT and CCMW
SCMCN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
50°
1/4 SCMCN -6-2 .375 .375 2.5 .195 .430 0 0 0.1 CCMT 21.51
3/8 SCMCN -8-3 .500 .500 3.5 .264 .610 0 0 0.2 CCMT 32.52
-12-3 .750 .750 4.5 .389 .610 0 0 0.7 CCMT 32.52
-16-3 1.00 1.00 6 .514 .610 0 0 1.4 CCMT 32.52
Toolholder/
Insert
dimension
47
Turning - Toolholders, external
Toolholders for inserts CCMT
SCRCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
75°
3/8 SCRCR -8-3 .500 .500 3.5 .548 .680 0 0 0.3 CCMT 32.52
SCRCL -8-3 .500 .500 3.5 .264 .680 0 0 0.2 CCMT 32.52
Toolholder/
Insert
dimension
48
Turning - Toolholders, external
Toolholders for inserts DCMT and DCMW
SDJCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
93°
1/4 SDJCR -6-2 .375 .375 2.5 .500 .680 0 0 0.1 DCMT 21.51
-8-2 .500 .500 3.5 .625 .680 0 0 0.2 DCMT 21.51
-12-2 .750 .750 4.5 1.000 .670 0 0 0.7 DCMT 21.51
SDJCL -6-2 .375 .375 2.5 .500 .680 0 0 0.1 DCMT 21.51
-8-2 .500 .500 3.5 .625 .680 0 0 0.2 DCMT 21.51
-12-2 .750 .750 4.5 1.000 .670 0 0 0.7 DCMT 21.51
3/8 SDJCR 8-3 .500 .500 3.5 .625 1.00 0 0 0.2 DCMT 32.52
-10-3 .625 .625 4 .750 1.00 0 0 0.4 DCMT 32.52
-12-3 .750 .750 4.5 1.000 1.00 0 0 0.7 DCMT 32.52
-16-3 1.00 1.00 6 1.250 .980 0 0 1.4 DCMT 32.52
SDJCL -8-3 .500 .500 3.5 .625 1.00 0 0 0.2 DCMT 32.52
-10-3 .625 .625 4 .750 1.00 0 0 0.4 DCMT 32.52
-12-3 .750 .750 4.5 1.000 1.00 0 0 0.7 DCMT 32.52
-16-3 1.00 1.00 6 1.250 .980 0 0 1.4 DCMT 32.52
1/2 SDJCR -12-4 .750 .750 4.5 1.000 1.25 0 0 0.7 DCMT 432
-16-4 1.00 1.00 6 1.250 1.25 0 0 1.6 DCMT 432
SDJCL -16-4 1.00 1.00 6 1.250 1.25 0 0 1.6 DCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
49
Turning - Toolholders, external
Toolholders for inserts DCMT and DCMW
SDPCN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
62.5°
1/4 SDPCN -8-2 .500 .500 3.5 .250 - 0 0 0.2 DCMT 21.51
-10-2 .625 .625 4 .313 - 0 0 0.4 DCMT 21.51
3/8 SDPCN -12-3 .750 .750 4.5 .375 - 0 0 0.7 DCMT 32.52
-16-3 1.00 1.00 6 .500 - 0 0 1.4 DCMT 32.52
Toolholder/
Insert
dimension
50
Turning - Toolholders, external
Toolholders for inserts RCMT
SRDCN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
.236 SRDCN -10-06 .625 .625 4 .431 .630 0 0 0.4 RCMT 0602
.315 SRDCN -12-08 .750 .750 5 .532 .787 0 0 0.7 RCMT 0803
.393 SRDCN -12-10 .750 .750 5 .572 .787 0 0 0.7 RCMT 10T3
.472 SRDCN -16-12 1.00 1.00 7 .736 1.260 0 0 1.8 RCMT 1204
-85-12 1.25 1.00 7 .736 1.260 0 0 2.2 RCMT 1204
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
51
Turning - Toolholders, external
Toolholders for inserts RCMT
SRGCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l2 l3 γo° γp° insert
1/4 SRGCR -12-2 .750 .750 4.5 1.00 1.50 .750 0 0 0.5 RCMT 22
-16-2 1.00 1.00 6 1.25 1.50 .750 0 0 1.4 RCMT 22
-20-2 1.25 1.25 6 1.50 1.50 .750 0 0 2.1 RCMT 22
SRGCL -12-2 .750 .750 4.5 1.00 1.50 .750 0 0 0.5 RCMT 22
-16-2 1.00 1.00 6 1.25 1.50 .750 0 0 1.4 RCMT 22
-20-2 1.25 1.25 6 1.50 1.50 .750 0 0 2.1 RCMT 22
3/8 SRGCR -12-3 .750 .750 4.5 1.00 1.75 1.00 0 0 0.5 RCMT 32.5
-16-3 1.00 1.00 6 1.25 1.75 1.00 0 0 1.3 RCMT 32.5
-20-3 1.25 1.25 6 1.50 1.75 1.00 0 0 2.1 RCMT 32.5
SRGCL -12-3 .750 .750 4.5 1.00 1.75 1.00 0 0 0.5 RCMT 32.5
-16-3 1.00 1.00 6 1.25 1.75 1.00 0 0 1.3 RCMT 32.5
-20-3 1.25 1.25 6 1.50 1.75 1.00 0 0 2.1 RCMT 32.5
1/2 SRGCR -20-4 1.25 1.25 6 1.50 1.75 1.00 0 0 2.1 RCMT 43
-24-4 1.50 1.50 6 2.00 2.75 1.00 0 0 2.7 RCMT 43
SRGCL -20-4 1.25 1.25 6 1.50 1.75 1.00 0 0 2.1 RCMT 43
-24-4 1.50 1.50 6 2.00 2.75 1.00 0 0 2.7 RCMT 43
Toolholder/
Insert
dimension
52
Turning - Toolholders, external
Toolholders for inserts SCMT and SCMW
SSDCN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
45°
3/8 SSDCN -8-3 .500 .500 3.5 .250 .660 0 0 0.2 SCMT 32.52
-10-3 .625 .625 4 .313 .660 0 0 0.4 SCMT 32.52
1/2 SSDCN -12-4 .750 .750 4.5 .375 .880 0 0 0.7 SCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
53
Turning - Toolholders, external
Toolholders for inserts TCMT and TCMW
STFCR/L STGCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
90°
1/4 STFCR -6-2 .375 .375 2.5 .500 .560 0 0 0.1 TCMT 21.51
-8-2 .500 .500 3.5 .625 .560 0 0 0.3 TCMT 21.51
-12-2 .750 .750 4.5 1.000 .650 0 0 0.7 TCMT 21.51
STFCL -6-2 .375 .375 2.5 .500 .560 0 0 0.1 TCMT 21.51
-8-2 .500 .500 3.5 .625 .560 0 0 0.3 TCMT 21.51
-12-2 .750 .750 4.5 1.000 .650 0 0 0.7 TCMT 21.51
3/8 STFCR -10-3 .625 .625 4 .750 .810 0 0 0.4 TCMT 32.52
STFCL -10-3 .625 .625 4 .750 .810 0 0 0.4 TCMT 32.52
90°
1/4 STGCR -6-2 .375 .375 2.5 .500 .620 0 0 0.1 TCMT 21.51
-8-2 .500 .500 3.5 .625 .620 0 0 0.3 TCMT 21.51
STGCL -6-2 .375 .375 2.5 .500 .620 0 0 0.1 TCMT 21.51
-8-2 .500 .500 3.5 .625 .620 0 0 0.3 TCMT 21.51
3/8 STGCR -10-3 .625 .625 4 .750 .850 0 0 0.4 TCMT 32.52
STGCL -10-3 .625 .625 4 .750 .850 0 0 0.4 TCMT 32.52
Toolholder/
Insert
dimension
54
Turning - Toolholders, external
Toolholders for inserts TCMT and TCMW
STDCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
45°
1/4 STDCR -6-2 .375 .375 2.5 .232 .620 0 0 0.1 TCMT 21.51
-8-2 .500 .500 3.5 .358 .620 0 0 0.3 TCMT 21.51
STDCL -6-2 .375 .375 2.5 .232 .620 0 0 0.1 TCMT 21.51
-8-2 .500 .500 3.5 .358 .620 0 0 0.3 TCMT 21.51
3/8 STDCR -10-3 .625 .625 4 .341 .870 0 0 0.4 TCMT 32.52
STDCL -10-3 .625 .625 4 .341 .870 0 0 0.4 TCMT 32.52
Toolholder/
Insert
dimension
55
Turning - Toolholders, external
Toolholders for inserts VBGW and VBMT
SVLBR/L SVVBN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
95°
1/4 SVLBR -10-2 .625 .625 4.5 .875 1.18 0 0 0.5 VBMT 21.51
-12-2 .750 .750 4.5 1.00 1.18 0 0 0.6 VBMT 21.51
-16-2 1.00 1.00 6 1.25 1.18 0 0 1.5 VBMT 21.51
SVLBL -10-2 .625 .625 4.5 .875 1.18 0 0 0.5 VBMT 21.51
-12-2 .750 .750 4.5 1.00 1.18 0 0 0.6 VBMT 21.51
-16-2 1.00 1.00 6 1.25 1.18 0 0 1.5 VBMT 21.51
3/8 SVLBR -12-3 .750 .750 4.5 .875 1.18 0 0 0.6 VBMT 332
-16-3 1.00 1.00 6 1.125 1.18 0 0 1.5 VBMT 332
SVLBL -12-3 .750 .750 4.5 .875 1.18 0 0 0.6 VBMT 332
-16-3 1.00 1.00 6 1.125 1.18 0 0 1.5 VBMT 332
-20-3 1.25 1.25 7 1.375 1.18 0 0 2.8 VBMT 332
72.5°
1/4 SVVBN -10-2 .625 .625 4 .313 - 0 0 0.5 VBMT 21.51
-12-2 .750 .750 4.5 .375 - 0 0 0.6 VBMT 21.51
-16-2 1.00 1.00 6 .500 - 0 0 1.5 VBMT 21.51
3/8 SVVBN -12-3 .750 .750 4.5 .375 - 0 0 0.6 VBMT 332
-16-3 1.00 1.00 6 .500 - 0 0 1.5 VBMT 332
-20-3 1.25 1.25 7 .625 - 0 0 2.8 VBMT 332
Toolholder/
Insert
dimension
56
Turning - Toolholders, external
Toolholders for insert RCGS
TRAOR/L TROON
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
3/16 TRAOR -85-1.5 1.25 1.00 6 1.014 .760 0 0 1.8 RCGS 1.5
TRAOL -85-1.5 1.25 1.00 6 1.014 .760 0 0 1.8 RCGS 1.5
Toolholder/
Insert
dimension
85-1.5 -
85-2 -
85-3 SC-510
85-4 SC-515
153-1.5 -
23-2 -
34-3 SC-505
45-4 SC-515
57
Turning - Toolholders, external
Toolholders for insert RCGS
TRGOR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l2 l3 γo° γp° insert
3/16 TRGOR -12-1.5 .750 .750 4.5 1.00 1.56 .760 0 0 0.5 RCGS 1.5
-16-1.5 1.00 1.00 6 1.25 1.56 .760 0 0 1.2 RCGS 1.5
-20-1.5 1.25 1.25 7 1.50 1.56 .760 0 0 2.6 RCGS 1.5
-24-1.5 1.50 1.50 7 2.00 1.99 .760 0 0 3.6 RCGS 1.5
TRGOL -12-1.5 .750 .750 4.5 1.00 1.56 .760 0 0 0.5 RCGS 1.5
-16-1.5 1.00 1.00 6 1.25 1.56 .760 0 0 1.2 RCGS 1.5
-20-1.5 1.25 1.25 7 1.50 1.56 .760 0 0 2.6 RCGS 1.5
-24-1.5 1.50 1.50 7 2.00 1.99 .760 0 0 3.6 RCGS 1.5
1/4 TRGOR -12-2 .750 .750 4.5 1.00 1.57 .770 0 0 0.5 RCGS 2
-16-2 1.00 1.00 6 1.25 1.57 .770 0 0 1.4 RCGS 2
-20-2 1.25 1.25 7 1.50 1.57 .770 0 0 2.6 RCGS 2
-24-2 1.50 1.50 7 2.00 2.00 .770 0 0 3.6 RCGS 2
TRGOL -12-2 .750 .750 4.5 1.00 1.57 .770 0 0 0.5 RCGS 2
-16-2 1.00 1.00 6 1.25 1.57 .770 0 0 1.4 RCGS 2
-20-2 1.25 1.25 7 1.50 1.57 .770 0 0 2.6 RCGS 2
-24-2 1.50 1.50 7 2.00 2.00 .770 0 0 3.6 RCGS 2
Toolholder/
Insert
dimension
..-1.5 -
..-2 -
..-3 SC-505
..-4 SC-513
58
Turning - Toolholders, external
Toolholders for insert RCGS
TRGOR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l2 l3 γo° γ p° insert
3/8 TRGOR -12-3 .750 .750 4.5 1.00 1.84 1.03 0 0 0.5 RCGS 3
-16-3 1.00 1.00 6 1.25 1.84 1.03 0 0 1.3 RCGS 3
-20-3 1.25 1.25 7 1.50 1.84 1.03 0 0 2.5 RCGS 3
-24-3 1.50 1.50 7 2.00 2.28 1.03 0 0 3.4 RCGS 3
TRGOL -12-3 .750 .750 4.5 1.00 1.84 1.03 0 0 0.5 RCGS 3
-16-3 1.00 1.00 6 1.25 1.84 1.03 0 0 1.3 RCGS 3
-20-3 1.25 1.25 7 1.50 1.84 1.03 0 0 2.5 RCGS 3
-24-3 1.50 1.50 7 2.00 2.28 1.03 0 0 3.4 RCGS 3
1/2 TRGOR -16-4 1.00 1.00 6 1.25 1.85 1.04 0 0 1.4 RCGS 4
-20-4 1.25 1.25 7 1.50 1.85 1.04 0 0 2.5 RCGS 4
-24-4 1.50 1.50 7 2.00 2.28 1.04 0 0 3.5 RCGS 4
TRGOL -16-4 1.00 1.00 6 1.25 1.85 1.04 0 0 1.4 RCGS 4
-20-4 1.25 1.25 7 1.50 1.85 1.04 0 0 2.5 RCGS 4
-24-4 1.50 1.50 7 2.00 2.28 1.04 0 0 3.5 RCGS 4
Toolholder/
Insert
dimension
..-3 SC-505
..-4 SC-513
59
Turning - Toolholders, external
Toolholders for insert CPG
CCLPR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
95°
1/2 CCLPR -12-4B .750 .750 4.5 1.00 1.07 5 5 0.7 CPG 422
-16-4D 1.00 1.00 6 1.25 1.07 5 5 1.7 CPG 422
-20-4D 1.25 1.25 6 1.50 1.07 5 5 2.7 CPG 422
CCLPL -12-4B .750 .750 4.5 1.00 1.07 5 5 0.7 CPG 422
-16-4D 1.00 1.00 6 1.25 1.07 5 5 1.7 CPG 422
-20-4D 1.25 1.25 6 1.50 1.07 5 5 2.7 CPG 422
Toolholder/
Insert
dimension
60
Turning - Toolholders, external
Toolholders for inserts SPG, SPMR and SPU
CSRPR/L CSSPR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
75°
3/8 CSRPR -8-3 .500 .500 4.5 .658 .920 5 0 0.3 SPG 322
CSRPL -8-3 .500 .500 4.5 .658 .920 5 0 0.3 SPG 322
1/2 CSRPL -12-4 .750 .750 4.5 .878 1.27 5 0 0.7 SPG 422
-16-4 1.00 1.00 6 1.128 1.27 5 0 1.7 SPG 422
3/4 CSRPL -86-6 1.50 1.00 7 1.066 1.48 5 0 3.0 SPG 633
45°
3/8 CSSPR -10-3 .625 .625 4.5 .623 .870 5 0 0.5 SPG 322
CSSPL -10-3 .625 .625 4.5 .623 .870 5 0 0.5 SPG 322
1/2 CSSPR -16-4 1.00 1.00 6 .912 1.18 5 0 1.7 SPG 422
CSSPL -16-4 1.00 1.00 6 .912 1.18 5 0 1.7 SPG 422
Toolholder/
Insert
dimension
61
Turning - Toolholders, external
Toolholders for inserts SPG, SPMR and SPU
CSDPN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
45°
3/8 CSDPN -10-3 .625 .625 4.5 .313 .960 0 5 0.5 SPG 322
-12-3 .750 .750 4.5 .375 .960 0 5 0.7 SPG 322
1/2 CSDPN -12-4 .750 .750 4.5 .375 1.24 0 5 0.7 SPG 422
-16-4 1.00 1.00 6 .500 1.24 0 5 1.6 SPG 422
3/4 CSDPN -20-6 1.25 1.25 7 .625 1.62 0 5 3.0 SPG 633
-24-6 1.50 1.50 7 .625 1.62 0 5 4.2 SPG 633
-85-6 1.25 1.00 6 .500 1.62 0 5 2.0 SPG 633
Toolholder/
Insert
dimension
62
Turning - Toolholders, external
Toolholders for inserts TPG, TPMR and TPU
CTGPR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
90°
1/4 CTGPR -8-2 .500 .500 4.5 .625 .750 5 0 0.3 TPG 221
-10-2 .625 .625 4.5 .750 .750 5 0 0.5 TPG 221
CTGPL -8-2 .500 .500 4.5 .625 .750 5 0 0.3 TPG 221
-10-2 .625 .625 4.5 .750 .750 5 0 0.5 TPG 221
3/8 CTGPR -12-3B .750 .750 4.5 1.00 .850 5 0 0.7 TPG 322
-16-3C 1.00 1.00 5 1.25 .850 5 0 1.4 TPG 322
CTGPL -12-3B .750 .750 4.5 1.00 .850 5 0 0.7 TPG 322
-16-3C 1.00 1.00 5 1.25 .850 5 0 1.4 TPG 322
1/2 CTGPR -16-4D 1.00 1.00 6 1.25 1.13 5 0 1.7 TPG 432
-20-4D 1.25 1.25 6 1.50 1.13 5 0 2.7 TPG 432
CTGPL -16-4D 1.00 1.00 6 1.25 1.13 5 0 1.7 TPG 432
-20-4D 1.25 1.25 6 1.50 1.13 5 0 2.7 TPG 432
CTGPR -85-4D 1.25 1.00 6 1.25 1.13 5 0 2.1 TPG 432
Toolholder/
Insert
dimension
63
Turning - Toolholders, external
Toolholders for inserts TPG, TPMR and TPU
CTRPR/L CTWPR
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
75°
3/8 CTRPR -12-3 .750 .750 4.5 .847 1.00 5 0 0.7 TPG 322
CTRPL -12-3 .750 .750 4.5 .847 1.00 5 0 0.7 TPG 322
CTRPR -16-3 1.00 1.00 6 1.097 1.00 5 0 1.7 TPG 322
CTRPL -16-3 1.00 1.00 6 1.097 1.00 5 0 1.7 TPG 322
80°
1/2 CTWPR -16-4 1.00 1.00 7 1.094 1.55 5 0 2.0 TPG 432
Toolholder/
Insert
dimension
64
Turning - Toolholders, external
Toolholders for inserts TPG, TPMR and TPU
CTEOR/L CTFPR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
60°
3/8 CTEOR -12-3 .750 .750 4.5 .698 1.08 5 0 0.7 TPG 322
CTEOL -12-3 .750 .750 4.5 .698 1.08 5 0 0.7 TPG 322
90°
1/4 CTFPR -8-2 .500 .500 4.5 0.75 .660 0 5 0.3 TPG 221
CTFPL -8-2 .500 .500 4.5 0.75 .660 0 5 0.3 TPG 221
3/8 CTFPR -12-3B .750 .750 4.5 1.00 .760 0 5 0.7 TPG 322
-16-3C 1.00 1.00 5 1.25 .760 0 5 1.4 TPG 322
CTFPL -12-3B .750 .750 4.5 1.00 .760 0 5 0.7 TPG 322
-16-3C 1.00 1.00 5 1.250 .760 0 5 1.4 TPG 322
1/2 CTFPR -16-4D 1.00 1.00 6 1.25 1.06 0 5 1.7 TPG 432
-20-4E 1.25 1.25 7 1.50 1.06 0 5 3.1 TPG 432
-85-4D 1.25 1.00 6 1.25 1.06 0 5 2.1 TPG 432
CTFPL -16-4D 1.00 1.00 6 1.25 1.06 0 5 1.7 TPG 432
-20-4E 1.25 1.25 7 1.50 1.06 0 5 3.1 TPG 432
Toolholder/
Insert
dimension
65
Turning - Toolholders, external
Toolholders for inserts TPG, TPMR and TPU
CTCPR/L CTCPN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
90°
3/8 CTCPR -16-3C 1.00 1.00 5 1.25 1.86 0 3 1.4 TPG 322
CTCPL -16-3C 1.00 1.00 5 1.25 1.86 0 3 1.4 TPG 322
1/2 CTCPR -16-4D 1.00 1.00 6 1.25 2.04 0 3 1.7 TPG 432
-24-4D 1.50 1.50 6 2.00 2.29 0 3 3.8 TPG 432
-85-4D 1.25 1.00 6 1.25 2.04 0 3 2.1 TPG 432
CTCPL -20-4D 1.25 1.25 6 2.00 2.04 0 3 2.7 TPG 432
90°
3/8 CTCPN -44-3 1.00 .500 8 - - 0 3 1.1 TPG 322
Toolholder/
Insert
dimension
66
Turning - Toolholders, external
Toolholders for insert RCMM
PROON
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
Toolholder/
Insert
dimension
67
Turning - Toolholders, external
Toolholders for insert SPMM
PSBPRS/LS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 γo° γp° insert
75°
3/8 PSBPLS -10-3 .625 .625 4.5 .500 5 0 0.5 SPMM 322
Toolholder/
Insert
dimension
68
Turning - Toolholders, external
Toolholders for insert SPMM
PSSPR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
45°
1/2 PSSPR -16-4 1.00 1.00 6 .910 1.51 0 5 1.6 SPMM 432
PSSPL -16-4 1.00 1.00 6 .910 1.51 0 5 1.6 SPMM 432
5/8 PSSPL -16-5 1.00 1.00 6 .830 1.46 0 5 1.6 SPMM 543
3/4 PSSPR -16-6 1.00 1.00 6 .740 1.58 0 5 1.6 SPMM 643
PSSPL -85-6 1.25 1.00 6 .740 1.58 0 5 2.4 SPMM 643
Toolholder/
Insert
dimension
69
Turning - Toolholders, external
Toolholders for insert SPMM
PSDPN PSKPRS/LS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
45°
3/8 PSDPN -10-3 .625 .625 4.5 .313 .620 0 5 0.5 SPMM 322
1/2 PSDPN -16-4 1.00 1.00 6 .500 .810 0 5 1.6 SPMM 432
-64-4 1.00 .750 6 .375 .810 0 5 1.2 SPMM 432
5/8 PSDPN -16-5 1.00 1.00 6 .500 1.20 0 5 1.6 SPMM 543
3/4 PSDPN -85-6 1.25 1.00 6 .500 1.20 0 5 2.0 SPMM 643
75°
3/8 PSKPRS -10-3 .625 .625 4.5 .750 - 0 5 0.5 SPMM 322
PSKPLS -10-3 .625 .625 4.5 .750 - 0 5 0.5 SPMM 322
U dim. for PSKPRS/LS = .090 for 3/8 I.C. .184 for 3/4 I.C.
Spare Parts, Parts included in delivery
Anvil Pin
Toolholder/
Insert
dimension
70
Turning - Toolholders, external
Toolholders for insert TPMM
PTGPRS/LS PTJPRS/LS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
90°
5/16 PTGPRS -6-2.5 .375 .375 4.5 .500 .790 5 0 0.2 TPMM 2.521
-8-2.5 .500 .500 4.5 .620 .790 5 0 0.3 TPMM 2.521
PTGPLS -6-2.5 .375 .375 4.5 .500 .790 5 0 0.2 TPMM 2.521
-8-2.5 .500 .500 4.5 .620 .790 5 0 0.3 TPMM 2.521
3/8 PTGPRS -12-3 .750 .750 4.5 1.00 .950 5 0 0.6 TPMM 322
-16-3 1.00 1.00 6 1.25 .950 5 0 1.5 TPMM 322
PTGPLS -12-3 .750 .750 4.5 1.00 .950 5 0 0.6 TPMM 322
-16-3 1.00 1.00 6 1.25 .950 5 0 1.5 TPMM 322
1/2 PTGPRS -85-4 1.25 1.00 6 1.25 1.17 5 0 1.9 TPMM 432
PTGPLS -85-4 1.25 1.00 6 1.25 1.17 5 0 1.9 TPMM 432
PTGPRS -86-4 1.50 1.00 7 1.25 1.17 5 0 2.7 TPMM 432
93°
3/8 PTJPRS -16-3 1.00 1.00 6 1.25 .930 5 0 1.5 TPMM 322
PTJPLS -16-3 1.00 1.00 6 1.25 .930 5 0 1.5 TPMM 322
1/2 PTJPRS -16-4 1.00 1.00 6 1.25 1.14 5 0 1.5 TPMM 432
PTJPLS -16-4 1.00 1.00 6 1.25 1.14 5 0 1.5 TPMM 432
-85-4 1.25 1.00 6 1.25 1.14 5 0 1.9 TPMM 432
PTJPRS -86-4 1.50 1.00 7 1.25 1.14 5 0 2.5 TPMM 432
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-3 TS-321-P PL-34
..-4 TS-431-P PL-46
..-5 TS-531-P PL-58
71
Turning - Toolholders, external
Toolholders for insert TPMM
PTAPRS/LS PTBPRS/LS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 γo° γp° insert
90°
5/16 PTAPRS -8-2.5 .500 .500 4.5 .510 5 0 0.3 TPMM 2.521
-10-2.5 .625 .625 4.5 .630 5 0 0.5 TPMM 2.521
PTAPLS -8-2.5 .500 .500 4.5 .510 5 0 0.3 TPMM 2.521
-10-2.5 .625 .625 4.5 .630 5 0 0.5 TPMM 2.521
3/8 PTAPRS -12-3 .750 .750 4.5 .770 5 0 0.7 TPMM 322
-16-3 1.00 1.00 6 1.02 5 0 1.6 TPMM 322
PTAPLS -12-3 .750 .750 4.5 .770 5 0 0.7 TPMM 322
-16-3 1.00 1.00 6 1.02 5 0 1.6 TPMM 322
75°
5/16 PTBPRS -8-2.5 .500 .500 4.5 .380 5 0 0.3 TPMM 2.521
PTBPLS -8-2.5 .500 .500 4.5 .380 5 0 0.3 TPMM 2.521
3/8 PTBPRS -12-3 .750 .750 4.5 .590 5 0 0.7 TPMM 322
-16-3 1.00 1.00 6 .840 5 0 1.6 TPMM 322
PTBPLS -12-3 .750 .750 4.5 .590 5 0 0.7 TPMM 322
-16-3 1.00 1.00 6 .840 5 0 1.6 TPMM 322
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-3 TS-321-P PL-34
72
Turning - Toolholders, external
Toolholders for insert TPMM
PTEPNS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
60°
5/16 PTEPNS -8-2.5 .500 .500 4.5 .250 .510 0 5 0.3 TPMM 2.521
-10-2.5 .625 .625 4.5 .313 .510 0 5 0.4 TPMM 2.521
3/8 PTEPNS -12-3 .750 .750 4.5 .375 .590 0 5 0.7 TPMM 322
-16-3 1.00 1.00 6 .500 .590 0 5 1.6 TPMM 322
1/2 PTEPNS -85-4 1.25 1.00 6 .500 .780 0 5 2.0 TPMM 432
-86-4 1.50 1.00 7 .500 .780 0 5 2.8 TPMM 432
5/8 PTEPNS -86-5 1.50 1.00 7 .500 .950 0 5 2.8 TPMM 543
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-3 TS-321-P PL-34
..-4 TS-431-P PL-46
..-5 TS-531-P PL-58
73
Turning - Toolholders, external
Toolholders for insert TPMM
PTCPN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 l3 γo° γp° insert
90°
5/16 PTCPN -33-2.5 .750 .375 6 .530 0 3 0.5 TPMM 2.521
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-3 TS-321-P PL-34
..-4 TS-431-P PL-46
74
Turning - Toolholders, external
Toolholders for insert TPMM
PTFPRS/LS
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 γo° γ p° insert
90°
5/16 PTFPRS -6-2.5 .375 .375 4.5 .620 0 5 0.2 TPMM 2.521
PTFPLS -8-2.5 .500 .500 4.5 .750 0 5 0.3 TPMM 2.521
3/8 PTFPRS -12-3 .750 .750 4.5 1.00 0 5 0.7 TPMM 322
-16-3 1.00 1.00 6 1.25 0 5 1.7 TPMM 322
PTFPLS -12-3 .750 .750 4.5 1.00 0 5 0.7 TPMM 322
-16-3 1.00 1.00 6 1.25 0 5 1.7 TPMM 322
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-3 TS-321-P PL-34
..-4 TS-431-P PL-46
..-5 TS-531-P PL-58
75
Turning - Toolholders, external
Toolholders for inserts CNGN and CNMN
CCLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
95°
3/8 CCLNR -16-3 1.00 1.00 6 1.25 1.18 -6 -6 1.7 CNMN 322
-20-3 1.25 1.25 6 1.50 1.18 -6 -6 2.7 CNMN 322
CCLNL -16-3 1.00 1.00 6 1.25 1.18 -6 -6 1.7 CNMN 322
-20-3 1.25 1.25 6 1.50 1.18 -6 -6 2.7 CNMN 322
Toolholder/
Insert
dimension
76
Turning - Toolholders, external
Toolholders for inserts RNGN and RNMN
CRGNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
Toolholder/
Insert
dimension
77
Turning - Toolholders, external
Toolholders for inserts RNGN and RNMN
CRDNN
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
Toolholder/
Insert
dimension
78
Turning - Toolholders, external
Toolholders for inserts SNGN, SNMN and SNUN
CSDNN CSKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γ p° insert
45°
1/2 CSDNN -16-4 1.00 1.00 6 .500 1.70 -6 -6 1.7 SNMN 422
-20-4 1.25 1.25 6 .625 1.70 -6 -6 2.7 SNMN 422
-24-4 1.50 1.50 6 .688 1.70 -6 -6 4.2 SNMN 422
75°
1/2 CSKNR -20-4 1.25 1.25 7 1.50 1.410 -6 -6 2.7 SNMN 422
CSKNL -20-4 1.25 1.25 7 1.50 1.410 -6 -6 2.7 SNMN 422
Toolholder/
Insert
dimension
79
Turning - Toolholders, external
Toolholders for inserts TNGN, TNMN and TNUN
CTJNR/L CTFNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. h b l1 f1 l3 γo° γp° insert
93°
1/4 CTJNR -16-2 1.00 1.00 6 1.25 1.18 -6 -6 1.7 TNMN 221
-20-2 1.25 1.25 6 1.25 1.18 -6 -6 2.7 TNMN 221
CTJNL -16-2 1.00 1.00 6 1.25 1.18 -6 -6 1.7 TNMN 221
-20-2 1.25 1.25 6 1.25 1.18 -6 -6 2.7 TNMN 221
90°
1/4 CTFNR -16-2 1.00 1.00 6 1.25 1.18 -6 -6 1.7 TNMN 221
-20-2 1.25 1.25 6 1.50 1.18 -6 -6 2.7 TNMN 221
CTFNL -16-2 1.00 1.00 6 1.25 1.18 -6 -6 1.7 TNMN 221
-20-2 1.25 1.25 6 1.50 1.18 -6 -6 2.7 TNMN 221
Toolholder/
Insert
dimension
80
Application overview - Internal turning
S..-MCLNR/L 95° A..-MCLNR/L 95° A..-P/SDUNR/L 93° S..-MDUNR/L 93° A..-MDUNR/L 93°
A..-P/SDLNR/L 95° A..-P/SDQNR/L 107.5° S..-MTFNR/L 90° A..-MTFNR/L 90° S..-MTKNR 75°
S..-MTUNR/L 93° A..-MSKNR 75° A..-MVUNR/L 93° A..-PVLNR/L 95° A..-PVPNR/L 117.5°
A..-MVLNR/L 95° A..-MVPNR/L 117.5° S, A, ..-MWLNR/L 95° S..-PTKPR 75° S..-PTLPR 95°
S..-PTFPR 90° S..-PTUPR 93° A..-CTFPR/L 90° S..-SCFCR/L 90° S..-SCLCR/L 95°
E..-SCLCR/L 95° S..-SDUCR/L 93° S..-SDQCR/L 107.5° S..-STFCR/L 90° S..-STUCR/L 93°
page 102 page 103 page 103 page 104 page 104
81
Application overview - Internal turning
page 105 page 106 page 107 page 107 page 108
S..-CSKNR/L 75° S, H, ..-SCLDR/L 95° S, H, ..-SCFDR 90° S, H, ..STLDR 95° S..-STFDR 90°
page 109 page 110 page 110 page 111 page 111
page 112 page 113 page 114 page 115 page 116
page 116 page 117 page 118 page 119 page 120
page 120 page 121 page 121 page 122 page 123
page 123 page 123 page 124 page 124 page 125
82
Application overview - Internal turning
page 125 page 126 page 127 page 128 page 129
page 129 page 130 page 131 page 132 page 132
PVXNR
page 133
83
Turning - Toolholders, internal
Toolholders for inserts CNGP, CNMA, CNMG, CNMM, CNMN and CNMP
MCLNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
95°
3/8 S12-MCLNR-3 .750 10 .500 1.000 -5 -14 1.20 CNMG 322
S16-MCLNR-3 1.000 12 .640 1.280 -5 -14 2.40 CNMG 322
S12-MCLNL-3 .750 10 .500 1.000 -5 -14 1.20 CNMG 322
S16-MCLNL-3 1.000 12 .640 1.280 -5 -14 2.40 CNMG 322
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
84
Turning - Toolholders, internal
Toolholders for inserts CNGP, CNMA, CNMG, CNMM, CNMN and CNMP With coolant port
MCLNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
95°
1/2 A16-MCLNR-4 1.000 12 .640 1.280 -5 -14 2.20 CNMG 432
A20-MCLNR-4 1.250 14 .765 1.530 -5 -14 4.30 CNMG 432
A24-MCLNR-4 1.500 14 .890 1.780 -5 -12 6.08 CNMG 432
A28-MCLNR-4 1.750 14 1.015 2.030 -5 -12 8.55 CNMG 432
A32-MCLNR-4 2.000 16 1.281 2.560 -5 -12 12.34 CNMG 432
A16-MCLNL-4 1.000 12 .640 1.280 -5 -14 2.20 CNMG 432
A20-MCLNL-4 1.250 14 .765 1.530 -5 -14 4.30 CNMG 432
A24-MCLNL-4 1.500 14 .890 1.780 -5 -12 6.08 CNMG 432
A28-MCLNL-4 1.750 14 1.015 2.030 -5 -12 8.55 CNMG 432
A32-MCLNL-4 2.000 16 1.281 2.560 -5 -12 12.34 CNMG 432
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
85
Turning - Toolholders, internal
Toolholders for inserts DNGA, DNMG and DNMP With coolant through
P/SDUNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
93°
3/8 A10-SDUNR-3 .625 10 .500 .850 -5 -14 0.76 DNMG 332
A12-SDUNR-3 .750 10 .562 .980 -5 -14 1.19 DNMG 332
A10-SDUNL-3 .625 10 .500 .850 -5 -14 0.76 DNMG 332
A12-SDUNL-3 .750 10 .562 .980 -5 -14 1.19 DNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
86
Turning - Toolholders, internal
Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM and DNMP
MDUNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
93°
3/8 S12-MDUNR-3 .750 10 .562 .980 -5 -14 1.20 DNMG 332
S16-MDUNR-3 1.000 12 .750 1.300 -5 -14 2.42 DNMG 332
S20-MDUNR-3 1.250 14 1.000 2.000 -5 -10 4.56 DNMG 332
S12-MDUNL-3 .750 10 .562 .980 -5 -14 1.20 DNMG 332
S16-MDUNL-3 1.000 12 .750 1.300 -5 -14 2.42 DNMG 332
S20-MDUNL-3 1.250 14 1.000 2.000 -5 -10 4.56 DNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
87
Turning - Toolholders, internal
Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM and DNMP With coolant port
MDUNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
93°
1/2 A20-MDUNR-4 1.250 14 1.000 2.000 -5 -10 4.35 DNMG 432
A24-MDUNR-4 1.500 14 1.125 2.250 -5 -10 6.17 DNMG 432
A28-MDUNR-4 1.750 14 1.250 2.500 -5 -10 8.61 DNMG 432
A32-MDUNR-4 2.000 16 1.375 3.000 -5 -10 12.23 DNMG 432
A20-MDUNL-4 1.250 14 1.000 2.000 -5 -10 4.35 DNMG 432
A24-MDUNL-4 1.500 14 1.125 2.250 -5 -10 6.17 DNMG 432
A28-MDUNL-4 1.750 14 1.250 2.500 -5 -10 8.61 DNMG 432
A32-MDUNL-4 2.000 16 1.375 3.000 -5 -10 12.23 DNMG 432
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
88
Turning - Toolholders, internal
Toolholders for inserts DNMA, DNMG and DNMP With coolant through
P/SDLNR/L P/SDQNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
95°
3/8 A12-SDLNR-3 .750 10 .500 .930 -6 -16 1.19 DNMG 332
A12-SDLNL-3 .750 10 .500 .930 -6 -16 1.19 DNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
89
Turning - Toolholders, internal
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTFNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
3/8 S12-MTFNR-3 .750 10 .500 1.000 -5 -14 1.20 TNMG 332
S16-MTFNR-3 1.000 12 .640 1.280 -5 -13 2.38 TNMG 332
S20-MTFNR-3 1.250 14 .765 1.530 -5 -11 4.50 TNMG 332
S24-MTFNR-3 1.500 14 .890 1.780 -5 -10 6.37 TNMG 332
S12-MTFNL-3 .750 10 .500 1.000 -5 -14 1.20 TNMG 332
S16-MTFNL-3 1.000 12 .640 1.280 -5 -13 2.38 TNMG 332
S20-MTFNL-3 1.250 14 .765 1.530 -5 -11 4.50 TNMG 332
S24-MTFNL-3 1.500 14 .890 1.780 -5 -10 6.37 TNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Optional-to be ordered separately
90
Turning - Toolholders, internal
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU With coolant port
MTFNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
3/8 A16-MTFNR-3 1.000 12 .640 1.280 -5 -12 2.19 TNMG 332
A20-MTFNR-3 1.250 14 .765 1.530 -5 -12 4.27 TNMG 332
A16-MTFNL-3 1.000 12 .640 1.280 -5 -12 2.19 TNMG 332
A20-MTFNL-3 1.250 14 .765 1.530 -5 -12 4.27 TNMG 332
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
91
Turning - Toolholders, internal
Toolholders for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU
MTKNR MTUNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
75°
3/8 S16-MTKNR-3 1.000 12 .640 1.280 -4 -12 2.38 TNMG 322
93°
3/8 S16-MTUNR-3 1.000 12 .640 1.280 -5 -13 2.38 TNMG 322
S20-MTUNR-3 1.250 14 .756 1.530 -5 -11 4.51 TNMG 322
S16-MTUNL-3 1.000 12 .640 1.280 -5 -13 2.38 TNMG 322
S20-MTUNL-3 1.250 14 .765 1.530 -5 -11 4.51 TNMG 322
Toolholder/
Insert
dimension
92
Turning - Toolholders, internal
Toolholders for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU With coolant port
MSKNR
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
75°
1/2 A20-MSKNR-4 1.250 14 .765 1.530 -5 -12 4.29 SNMG 432
A24-MSKNR-4 1.500 14 .890 1.780 -5 -12 6.08 SNMG 432
A28-MSKNR-4 1.750 14 1.015 2.030 -5 -12 8.56 SNMG 432
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
93
Turning - Toolholders, internal
Toolholders for inserts VNGA, VNGM, VNGP, VNMA, VNMG, VNMN and VNMP With coolant port
MVUNR
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
93°
3/8 A20-MVUNR-3 1.250 14 1.125 2.250 -5 -12 4.38 VNMG 332
A24-MVUNR-3 1.500 14 1.250 2.250 -5 -12 6.21 VNMG 332
A20-MVUNL-3 1.250 14 1.125 2.500 -5 -12 4.38 VNMG 332
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
94
Turning - Toolholders, internal
Toolholders for insert VNMG With coolant through
PVLNR/L PVPNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
95°
5/16 A16-PVLNR-2.5 1.000 12 .640 1.200 -3 -12 2.38 VNMG 2.531
A20-PVLNR-2.5 1.250 14 .765 1.470 -3 -12 4.53 VNMG 2.531
A16-PVLNL-2.5 1.000 12 .640 1.200 -3 -12 2.38 VNMG 2.531
A20-PVLNL-2.5 1.250 14 .765 1.470 -3 -12 4.53 VNMG 2.531
117.5°
5/16 A16-PVPNR-2.5 1.000 12 .750 1.300 -3 -12 2.38 VNMG 2.531
A20-PVPNR-2.5 1.250 14 1.00 1.705 -3 -12 4.53 VNMG 2.531
A16-PVPNL-2.5 1.000 12 .750 1.300 -3 -12 2.38 VNMG 2.531
A20-PVPNL-2.5 1.250 14 1.00 1.705 -3 -12 4.53 VNMG 2.531
Toolholder/
Insert
dimension
95
Turning - Toolholders, internal
Toolholders for inserts VNGA, VNGM, VNGP, VNMA, VNMG, VNMN and VNMP With coolant port
MVLNR/L MVPNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 l2 min γo° γp° insert
95°
3/8 A24-MVLNR-3 1.500 14.795 1.125 14 2.250 -5 -12 6.54 VNMG 332
A24-MVLNL-3 1.500 14.795 1.125 14 2.250 -5 -12 6.54 VNMG 332
1/2 A32-MVLNR-4 2.000 16.980 1.500 16 3.000 -5 -12 12.61 VNMG 432
A32-MVLNL-4 2.000 16.980 1.500 16 3.000 -5 -12 12.61 VNMG 432
117.5°
3/8 A20-MVPNR-3 1.250 14 .875 - 1.750 -5 -12 4.21 VNMG 332
A32-MVPNR-3 2.000 16 1.250 - 2.500 -5 -12 11.85 VNMG 332
A20-MVPNL-3 1.250 14 .875 - 1.750 -5 -12 4.21 VNMG 332
A32-MVPNL-3 2.000 16 1.250 - 2.500 -5 -12 11.85 VNMG 332
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
96
Turning - Toolholders, internal
Toolholders for inserts WNGP, WNMA, WNMG, WNMM and WNMP With coolant port (for A32)
MWLNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
95°
3/8 S12-MWLNR-3 .750 10 .500 .930 -5 -14 1.21 WNMG 332
S16-MWLNR-3 1.000 12 .640 1.200 -5 -14 2.90 WNMG 332
S20-MWLNR-3 1.250 14 .765 1.470 -5 -14 4.53 WNMG 332
S12-MWLNL-3 .750 10 .500 .930 -5 -14 1.21 WNMG 332
S16-MWLNL-3 1.000 12 .640 1.200 -5 -14 2.90 WNMG 332
S20-MWLNL-3 1.250 14 .765 1.470 -5 -14 4.53 WNMG 332
Toolholder/
Insert
dimension Port Pipe thd. in bar
Please check availability in current price and stock-list *Optional-to be ordered separately
97
Turning - Toolholders, internal
Toolholders for insert TPMM
PTKPR PTLPR
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
75°
5/16 S12-PTKPR-2.5 .750 11.91 .486 1.000 +4 -4 1.19 TPMM 2.521
95°
1/2 S28-PTLPR-4 1.750 14 1.167 2.334 +4 -4 8.77 TPMM 432
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-4 TS-431-P PL-46
98
Turning - Toolholders, internal
Toolholders for insert TPMM
PTFPR PTUPR
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
5/16 S12-PTFPR-2.5 .750 12 .505 1.010 +4 -4 1.19 TPMM 2.521
S16-PTFPR-2.5 1.000 12 .567 1.134 +4 -4 2.38 TPMM 2.521
93°
5/16 S16-PTUPR-2.5 1.000 12 .568 1.136 +4 -4 2.38 TPMM 2.521
Toolholder/
Insert
dimension
..-2.5 - PL-2.53
..-3 TS-321-P PL-34
99
Turning - Toolholders, internal
Toolholders for inserts TPG, TPMR and TPU With coolant port
CTFPR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
3/8 A16-CTFPR-3 1.000 12 .578 1.156 +5 0 2.19 TPG 322
A20-CTFPR-3 1.250 14 .765 1.530 +5 -3 4.30 TPG 322
A28-CTFPR-3 1.750 14 1.015 2.030 +5 -3 8.55 TPG 322
A16-CTFPL-3 1.000 12 .578 1.156 +5 0 2.19 TPG 322
A20-CTFPL-3 1.250 14 .765 1.530 +5 -3 4.30 TPG 322
A24-CTFPL-3 1.500 14 .890 1.780 +5 -3 5.94 TPG 322
A28-CTFPL-3 1.750 14 1.015 2.030 +5 -3 8.55 TPG 322
Toolholder/
Insert
dimension Port Pipe thd. in bar
100
Turning - Toolholders, internal
Toolholders for inserts CCMT and CCMW
SCFCR/L SCLCR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
1/4 S06-SCFCR-2 .375 6 .250 .510 0 -11 0.16 CCMT 21.51
S06-SCFCL-2 .375 6 .250 .510 0 -11 0.16 CCMT 21.51
95°
1/4 S06-SCLCR-2 .375 6 .250 .500 0 -11 0.16 CCMT 21.51
S08-SCLCR-2 .500 8 .313 .625 0 -9 0.39 CCMT 21.51
S10-SCLCR-2 .625 10 .406 .812 0 -7 0.76 CCMT 21.51
S06-SCLCL-2 .375 6 .250 .500 0 -11 0.16 CCMT 21.51
S08-SCLCL-2 .500 8 .313 .625 0 -9 0.39 CCMT 21.51
S10-SCLCL-2 .625 10 .406 .812 0 -7 0.76 CCMT 21.51
Toolholder/
Insert
dimension
101
Turning - Toolholders, internal
Toolholders for inserts CCMT and CCMW Carbide shank with coolant through
SCLCR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
95°
1/4 E06-SCLCR-2 .375 6 .250 .500 0 -11 .50 CCMT 21.51
E08-SCLCR-2 .500 8 .313 .625 0 -9 1.0 CCMT 21.51
E10-SCLCR-2 .625 10 .406 .812 0 -7 1.5 CCMT 21.51
E06-SCLCL-2 .375 6 .250 .500 0 -11 .50 CCMT 21.51
E08-SCLCL-2 .500 8 .313 .625 0 -9 1.0 CCMT 21.51
E10-SCLCL-2 .625 10 .406 .812 0 -7 1.5 CCMT 21.51
Toolholder/
Insert
dimension
102
Turning - Toolholders, internal
Toolholders for inserts DCMT and DCMW
SDUCR/L SDQCR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
93°
1/4 S08-SDUCR-2 .500 8 .437 .780 0 -11 0.39 DCMT 21.52
S10-SDUCR-2 .625 10 .500 .840 0 -5 0.76 DCMT 21.52
S08-SDUCL-2 .500 8 .437 .780 0 -11 0.39 DCMT 21.52
S10-SDUCL-2 .625 10 .500 .840 0 -5 0.76 DCMT 21.52
Toolholder/
Insert
dimension
103
Turning - Toolholders, internal
Toolholders for inserts TCMT and TCMW
STFCR/L STUCR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
1/4 S06-STFCR-2 .375 6 .250 .500 0 -11 0.16 TCMT 21.51
S08-STFCR-2 .500 8 .313 .625 0 -9 0.39 TCMT 21.51
S10-STFCR-2 .625 10 .406 .812 0 -7 0.76 TCMT 21.51
S12-STFCR-2 .750 10 .500 1.000 0 -6 1.19 TCMT 21.51
S06-STFCL-2 .375 6 .250 .500 0 -11 0.16 TCMT 21.51
S08-STFCL-2 .500 8 .313 .625 0 -9 0.39 TCMT 21.51
S10-STFCL-2 .625 10 .406 .812 0 -7 0.76 TCMT 21.51
S12-STFCL-2 .750 10 .500 1.000 0 -6 1.19 TCMT 21.51
93°
1/4 S06-STUCR-2 .375 6 .250 .500 0 -11 0.16 TCMT 21.51
S08-STUCR-2 .500 8 .313 .625 0 -9 0.39 TCMT 21.51
S10-STUCR-2 .625 10 .406 .812 0 -7 0.76 TCMT 21.51
S06-STUCL-2 .375 6 .250 .500 0 -11 0.16 TCMT 21.51
S08-STUCL-2 .500 8 .313 .625 0 -9 0.39 TCMT 21.51
S10-STUCL-2 .625 10 .406 .812 0 -7 0.76 TCMT 21.51
Toolholder/
Insert
dimension
104
Turning - Toolholders, internal
Toolholders for inserts TCMT and TCMW Carbide shank with coolant through
STFCR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
90°
1/4 E06-STFCR-2 .375 6 .250 .500 0 -15 .50 TCMT 21.51
E08-STFCR-2 .500 8 .313 .625 0 -9 1.00 TCMT 21.51
E10-STFCR-2 .625 10 .406 .812 0 -7 1.50 TCMT 21.51
E06-STFCL-2 .375 6 .250 .500 0 -15 .50 TCMT 21.51
E08-STFCL-2 .500 8 .313 .625 0 -9 1.00 TCMT 21.51
E10-STFCL-2 .625 10 .406 .812 0 -7 1.50 TCMT 21.51
Toolholder/
Insert
dimension
105
Turning - Toolholders, internal
Toolholders for inserts TCMT and TCMW Carbide shank with coolant through
STUCR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
93°
1/4 E06-STUCR-2 .375 6 .250 .500 0 -15 .50 TCMT 21.51
E08-STUCR-2 .500 8 .313 .625 0 -9 1.00 TCMT 21.51
E10-STUCR-2 .625 10 .406 .812 0 -7 1.50 TCMT 21.51
E06-STUCL-2 .375 6 .250 .500 0 -15 .50 TCMT 21.51
E08-STUCL-2 .500 8 .313 .625 0 -9 1.00 TCMT 21.51
E10-STUCL-2 .625 10 .406 .812 0 -7 1.50 TCMT 21.51
Toolholder/
Insert
dimension
106
Turning - Toolholders, internal
Toolholders for inserts VBMT and VBMW With coolant through
SVQBR/L SVUBR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
107.5°
1/4 A10-SVQBR-2 .625 10 .500 .840 0 -7 .76 VBMT 21.51
A12-SVQBR-2 .750 10 .562 1.125 0 -5 1.19 VBMT 21.51
A16-SVQBR-2 1.000 12 .750 1.500 0 -3 2.38 VBMT 21.51
A10-SVQBL-2 .625 10 .500 .840 0 -7 .76 VBMT 21.51
A12-SVQBL-2 .750 10 .562 1.125 0 -5 1.19 VBMT 21.51
A16-SVQBL-2 1.000 12 .750 1.500 0 -3 2.38 VBMT 21.51
93°
1/4 A10-SVUBR-2 .625 10 .500 .840 0 -7 .76 VBMT 21.51
A12-SVUBR-2 .750 10 .562 1.125 0 -5 1.19 VBMT 21.51
A16-SVUBR-2 1.000 12 .750 1.500 0 -3 2.38 VBMT 21.51
A10-SVUBL-2 .625 10 .500 .840 0 -7 .76 VBMT 21.51
A12-SVUBL-2 .750 10 .562 1.125 0 -5 1.19 VBMT 21.51
A16-SVUBL-2 1.000 12 .750 1.500 0 -3 2.38 VBMT 21.51
Toolholder/
Insert
dimension
107
Turning - Toolholders, internal
Toolholders for inserts RNGN and RNMN
CRGNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
**117.10-621 optional anvil for RNMN 43 insert must be ordered separately
108
Turning - Toolholders, internal
Toolholders for inserts SNGN, SNMM and SNMN
CSKNR/L
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d l1 f1 min γo° γp° insert
75°
3/8 S16-CSKNR-3 1.000 12 .640 1.28 - -12 2.38 SNGN 322
S20-CSKNR-3 1.250 14 .765 1.47 - -10 4.53 SNGN 322
S16-CSKNL-3 1.000 12 .640 1.28 - -12 2.38 SNGN 322
S20-CSKNL-3 1.250 14 .765 1.47 - -10 4.53 SNGN 322
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
**174.10-621 optional anvil for SNMN 43 insert must be ordered separately
109
Turning - Toolholders, internal
Toolholders for insert CDCB Small Diameter Boring Bars
SCLDR/L SCLDR SCFDR
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d D1 b l1 f1 l3 min γo° γp° insert
95°
5/32 S03 SCLDR-1.2* .1875 - .177 2.5 .086 - .180 0 -17 .02 CDxx 1.2
S03 SCLDL-1.2* .1875 - .177 2.5 .086 - .180 0 -17 .02 CDxx 1.2
S04 SCLDR-1.2 .250 - .235 3.0 .155 - .280 0 -12 .04 CDxx 1.2
S04 SCLDL-1.2 .250 - .235 3.0 .155 - .280 0 -12 .04 CDxx 1.2
H03 SCLDR-1.2 .1875 - .177 4.0 .126 - .220 0 -17 .07 CDxx 1.2
S0306 SCLDR-1.2* .375 .164 .358 2.5 .099 .520 .180 0 -12 .07 CDxx 1.2
S0406 SCLDR-1.2 .375 .250 .358 2.5 .155 1.25 .280 0 -12 .07 CDxx 1.2
H0308 SCLDR-1.2 .500 .1875 .480 4.0 .126 1.12 .220 0 -17 .45 CDxx 1.2
90°
5/32 S03 SCFDR-1.2 .1875 - .177 3.0 .116 - .210 0 -17 .025 CDxx 1.2
S04 SCFDR-1.2 .250 - .235 3.0 .150 - .275 0 -12 .04 CDxx 1.2
H03 SCFDR-1.2 .1875 - .177 4.0 .116 - .210 0 -17 .07 CDxx 1.2
* -7° lead angle Bar descriptions that begin with H denotes heavy metal construction.
Spare Parts, Parts included in delivery
Locking screw Key
Toolholder/
Insert
dimension
110
Turning - Toolholders, internal
Toolholders for inserts TDAB and TDCH Small Diameter Boring Bars
STLDR STLDR STFDR
Dimensions in inch
Insert ∅ Gage
Application I.C. Part No. d D1 b l1 f1 l3 min γo° γp° insert
95°
5/32 S03 STLDR-1.2 .1875 - .177 3.5 .176 - .270 0 -17 .03 TDxx 1.2
S04 STLDR-1.2 .250 - .235 4.0 .175 - .300 0 -12 .055 TDxx 1.2
S05 STLDR-1.2 .312 - .295 4.0 .193 - .350 0 -8 .085 TDxx 1.2
H03 STLDR-1.2 .1875 - .177 4.0 .176 - .270 0 -17 .07 TDxx 1.2
H04 STLDR-1.2 .250 - .235 4.0 .175 - .300 0 -12 .12 TDxx 1.2
H05 STLDR-1.2 .312 - .295 6.0 .193 - .350 0 -8 .29 TDxx 1.2
S0308 STLDR-1.2 .500 .1875 .480 3.0 .176 1.00 .270 0 -17 .17 TDxx 1.2
S0408 STLDR-1.2 .500 .250 .480 3.25 .175 1.25 .300 0 -12 .18 TDxx 1.2
H0308 STLDR-1.2 .500 .1875 .480 4.0 .176 1.12 .270 0 -17 .49 TDxx 1.2
H0408 STLDR-1.2 .500 .250 .480 4.0 .175 1.50 .300 0 -12 1.12 TDxx 1.2
90°
5/32 S05 STFDR-1.2 .312 - .295 4.0 .193 - .350 0 -8 .085 TDxx 1.2
Toolholder/
Insert
dimension
111
Cartridges
Cartridges for inserts CNGA, CNGN, CNGP, CNMA, CNMG, CNMM, CNMN and CNMP Angular Mount ~ M-Type
MCLNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
1/2 MCLNR -12CA-12 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 CNMG 432
-16CA-12 -5 -10 2.362 .984 2.480 .984 .71 .630 .98 .32 CNMG 432
-20CA-12 -5 -10 2.756 .984 2.756 1.181 .71 .787 1.18 .44 CNMG 432
MCLNL -12CA-12 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 CNMG 432
-16CA-12 -5 -10 2.362 .984 2.480 .984 .71 .630 .98 .32 CNMG 432
-20CA-12 -5 -10 2.756 .984 2.756 1.181 .71 .787 1.18 .44 CNMG 432
3/4 MCLNR -25CA-19 -6 -9 3.937 1.26 3.937 1.181 .94 .984 1.38 1.0 CNMG 643
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
112
Cartridges
Cartridges for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU Angular Mount ~ M-Type
MSKNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
3/8 MSKNR -10CA-09 -10 -5 1.575 .551 1.968 .787 .39 .394 .590 .09 SNMG 322
MSKNL -10CA-09 -10 -5 1.575 .551 1.968 .787 .39 .394 .590 .09 SNMG 322
1/2 MSKNR -12CA-12 -10 -5 1.968 .787 2.165 .787 .55 .472 .790 .19 SNMG 432
MSKNL -12CA-12 -10 -5 1.968 .787 2.165 .787 .55 .472 .790 .19 SNMG 432
MSKNR -16CA-12 -10 -5 2.362 .984 2.480 .984 .55 .630 .980 .35 SNMG 432
MSKNL -16CA-12 -10 -5 2.362 .984 2.480 .984 .55 .630 .980 .35 SNMG 432
MSKNR -47CW-4 -10 -5 1.968 .787 2.165 .787 .55 .472 .790 .19 SNMG 432
5/8 MSKNR -20CA-15 -10 -5 2.576 .984 2.756 1.181 .71 .787 1.18 .45 SNMG 543
MSKNL -20CA-15 -10 -5 2.576 .984 2.756 1.181 .71 .787 1.18 .45 SNMG 543
3/4 MSKNR -25CA-19 -10 -5 3.937 1.26 3.937 1.181 .940 .984 1.38 1.0 SNMG 643
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
113
Cartridges
Cartridges for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU Angular Mount ~ M-Type
MSRNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
3/8 MSRNR -39CW-3 -10 -5 1.575 .551 1.968 .787 .39 .394 .59 .10 SNMG 322
1/2 MSRNR -12CA-12 -10 -5 1.968 .787 2.165 .787 .55 .472 .79 .20 SNMG 432
MSRNL -12CA-12 -10 -5 1.968 .787 2.165 .787 .55 .472 .79 .33 SNMG 432
-16CA-12 -10 -5 2.362 .984 2.165 .984 .71 .630 .98 .33 SNMG 432
5/8 MSRNR -20CA-15 -10 -5 2.756 .984 2.756 1.181 .71 .787 1.18 .46 SNMG 543
MSRNL -20CA-15 -10 -5 2.756 .984 2.756 1.181 .71 .787 1.18 .46 SNMG 543
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
114
Cartridges
Cartridges for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU Angular Mount ~ M-Type
MSSNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h l3 insert
3/8 MSSNR -10CA-09 -9 -9 1.575 .551 1.732 .787 .39 .394 .59 1.971 .08 SNMG 322
MSSNL -10CA-09 -9 -9 1.575 .551 1.732 .787 .39 .394 .59 1.971 .08 SNMG 322
1/2 MSSNR -12CA-12 -9 -9 1.968 .787 1.850 .787 .55 .472 .79 2.178 .17 SNMG 432
MSSNL -12CA-12 -9 -9 1.968 .787 1.850 .787 .55 .472 .79 2.178 .17 SNMG 432
MSSNR -47CW-4 -9 -9 1.968 .787 1.850 .787 .55 .472 .79 2.178 .17 SNMG 432
-16CA-12 -9 -9 2.362 .984 2.087 .984 .71 .630 .98 2.415 .27 SNMG 432
MSSNL -16CA-12 -9 -9 2.362 .984 2.087 .984 .71 .630 .98 2.415 .27 SNMG 432
5/8 MSSNR -20CA-15 -9 -9 2.756 .984 2.362 1.181 .71 .787 1.18 2.415 .39 SNMG 543
MSSNL -20CA-15 -9 -9 2.756 .984 2.362 1.181 .71 .787 1.18 2.415 .39 SNMG 543
3/4 MSSNR -25CA-19 -9 -9 3.937 1.26 3.425 1.181 .94 .984 1.38 3.917 .89 SNMG 643
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
115
Cartridges
Cartridges for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU Angular Mount ~ M-Type
MSTNR MSYNR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
1/2 MSTNR -47CW-4 -6 -10 1.968 .512 2.165 .787 .55 .472 .79 .16 SNMG 432
3/8 MSYNR -39CW-3 -4 -11 1.575 .551 1.968 .787 .39 .394 .59 .09 SNMG 322
1/2 MSYNR -47CW-4 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .20 SNMG 432
-63CW-4 -5 -10 2.362 .984 2.480 .984 .71 .630 .98 .65 SNMG 432
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
116
Cartridges
Cartridges for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU Angular Mount ~ M-Type
MTFNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
1/4 MTFNL -10CA-11 -5 -10 1.575 .551 1.968 .787 .39 .394 .59 .09 TNMG 221
3/8 MTFNR -12CA-16 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 TNMG 322
MTFNL -12CA-16 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 TNMG 322
MTFNR -47CW-3 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 TNMG 322
-16CA-16 -5 -9 2.362 .984 2.480 .984 .71 .630 .98 .34 TNMG 322
MTFNL -16CA-16 -5 -9 2.362 .984 2.480 .984 .71 .630 .98 .34 TNMG 322
MTFNR -63CW-3 -5 -9 2.362 .984 2.480 .984 .71 .630 .98 .34 TNMG 322
1/2 MTFNR -20CA-22 -5 -10 2.756 .984 2.756 1.181 .71 .787 1.18 .44 TNMG 432
MTFNL -20CA-22 -5 -10 2.756 .984 2.756 1.181 .71 .787 1.18 .44 TNMG 432
MTFNR -79CW-4 -5 -10 2.756 .984 2.756 1.181 .71 .787 1.18 .44 TNMG 432
MTFNL -79CW-4 -5 -10 2.756 .984 2.756 1.181 .71 .787 1.18 .44 TNMG 432
5/8 MTFNR -25CA-27 -5 -8 3.937 1.260 3.937 1.181 .94 .984 1.38 1.0 TNMG 543
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
117
Cartridges
Cartridges for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU Angular Mount ~ M-Type
MTGNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
1/4 MTGNR -10CA-11 -5 -10 1.575 .551 1.968 .787 .39 .394 .59 .09 TNMG 221
MTGNL -10CA-11 -5 -10 1.575 .551 1.968 .787 .39 .394 .59 .09 TNMG 221
3/8 MTGNR -12CA-16 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 TNMG 322
MTGNL -12CA-16 -5 -10 1.968 .787 2.165 .787 .55 .472 .79 .19 TNMG 322
MTGNR -16CA-16 -5 -9 2.362 .984 2.480 .984 .71 .630 .98 .34 TNMG 322
MTGNL -16CA-16 -5 -9 2.362 .984 2.480 .984 .71 .630 .98 .34 TNMG 322
1/2 MTGNR -20CA-22 -5 -8 2.756 .984 2.756 1.181 .71 .787 1.18 .45 TNMG 432
MTGNL -20CA-22 -5 -8 2.756 .984 2.756 1.181 .71 .787 1.18 .45 TNMG 432
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
118
Cartridges
Cartridges for inserts SPG, SPMR and SPU Angular Mount ~ PC type
CSKPR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
3/8 CSKPR -10CA-09 5 0 1.575 .549 1.968 .787 .39 .394 .59 .08 SPG 322
1/2 CSKPR -12CA-12 5 0 1.968 .787 2.165 .787 .55 .472 .79 .19 SPG 422
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
119
Cartridges
Cartridges for inserts SPG, SPMR and SPU Angular Mount ~ PC type
CSRPR CSSPR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
3/8 CSRPR -10CA-09 0 0 1.575 .549 1.968 .787 .39 .394 .59 .08 SPG 322
3/8 CSSPR -39CW-3 0 0 1.575 .549 1.732 .787 .39 .394 .59 .08 SPG 322
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
120
Cartridges
Cartridges for inserts TPG, TPMR and TPU Angular Mount ~ PC type
CTFPR/L CTGPR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
1/4 CTFPR -10CA-11 5 0 1.575 .549 1.968 .787 .39 .394 .59 .08 TPG 221
3/8 CTFPR -12CA-16 5 0 1.968 .787 2.165 .787 .55 .472 .79 .19 TPG 322
CTFPL -12CA-16 5 0 1.968 .787 2.165 .787 .55 .472 .79 .19 TPG 322
1/4 CTGPR -10CA-11 0 0 1.575 .549 1.968 .787 .39 .394 .59 .08 TPG 221
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
***174.18-634 for Left Hand cartridge.
121
Cartridges
Cartridges for inserts TPG, TPMR and TPU Angular Mount ~ PC type
CTFPR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
1/4 CTFPR -39CW-2 5 0 1.575 .551 1.968 .787 .39 .394 .59 .08 TPG 221
3/8 CTFPR -47CW-3 5 0 1.968 .787 2.165 .787 .55 .472 .79 .19 TPG 322
-16CA-16 5 0 2.362 .984 2.480 .984 .71 .630 .98 .34 TPG 322
CTFPL -16CA-16 5 0 2.362 .984 2.480 .984 .71 .630 .98 .34 TPG 322
1/2 CTFPR -20CA-22 5 0 2.756 .984 2.756 1.181 .71 .787 1.18 .44 TPG 432
CTFPL -20CA-22 5 0 2.756 .984 2.756 1.181 .71 .787 1.18 .44 TPG 432
5/8 CTFPR -25CA-27 5 0 3.937 1.26 3.937 1.181 .94 .984 1.38 1.0 TPG 543
Shank and
Insert size
Please check availability in current price and stock-list *Optional-to be ordered separately
**Not supplied, note that mounting hole accepts inch or metric screw
122
Cartridges
Cartridges for inserts CCGW, CCMT and CCMW Angular Mount ~ C-lock type
SCLCR SCFCR/L SCSCR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 b h1 h insert
3/8 SCLCR -10CA-09 0 0 1.575 .549 1.968 .787 .42 .394 .550 .07 CCMT 32.52
3/8 SCFCR -10CA-09 0 0 1.575 .549 1.968 .787 .42 .394 .550 .07 CCMT 32.52
SCFCL -10CA-09 0 0 1.575 .549 1.968 .787 .42 .394 .550 .07 CCMT 32.52
1/2 SCFCR -12CA-12 0 0 1.968 .787 2.165 .787 .63 .472 .750 .19 CCMT432
SCFCL -12CA-12 0 0 1.968 .787 2.165 .787 .63 .472 .750 .19 CCMT432
1/2 SCSCR -12CA-12 0 0 1.968 .787 1.850 .787 .63 .472 .750 .18 CCMT 432
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
123
Cartridges
Cartridges for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU 90° Mount ~ M-Type
MSKNR MSSNR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 l3 insert
3/8 MSKNR -41CX-3 -5 -8 1.50 .531 1.965 .840 .406 .562 .280 1.625 .09 SNMG 322
1/2 MSKNR -41CX-4 -5 -8 2.00 .687 1.965 .840 .406 .562 .280 1.625 .11 SNMG 432
3/8 MSSNR -41CX-3 -8 -8 1.50 .531 1.965 .840 .406 .562 .280 1.625 .08 SNMG 322
1/2 MSSNR -41CX-4 -8 -8 2.00 .687 2.306 .840 .406 .562 .280 1.966 .14 SNMG 432
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
124
Cartridges
Cartridges for inserts SNG, SNGA, SNGN, SNMA, SNMG, SNMM, SNMN, SNMP and SNU 90° Mount ~ M-Type
MSTNR MSYNR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 l3 insert
3/8 MSTNR -41CX-3 -6 -10 1.50 .531 1.965 .840 .406 .562 .280 1.625 .08 SNMG 322
1/2 MSTNR -41CX-4 -6 -10 2.00 .687 2.387 .840 .406 .562 .280 2.047 .14 SNMG 432
1/2 MSYNR -41CX-4 -5 -10 1.50 .687 1.965 .840 .406 .562 .280 1.625 .11 SNMG 432
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
125
Cartridges
Cartridges for inserts TNG, TNGA, TNGN, TNMA, TNMG, TNMM, TNMN, TNMP and TNU 90° Mount ~ M-Type
MTFNR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 l3 insert
1/4 MTFNR -41CX-2 -5 -10 1.50 .531 1.965 .840 .406 .562 .280 1.625 .09 TNMG 222
3/8 MTFNR -41CX-3 -5 -8 2.00 .687 1.965 .840 .406 .562 .280 1.625 .11 TNMG 332
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
126
Cartridges
Cartridges for inserts SPGN, SPMR and SPUN 90° Mount ~ M-Type
CSSPR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 l3 insert
3/8 CSSPR -41CX-3 +3 +3 1.50 .531 1.965 .840 .406 .562 .280 1.625 .07 SPG 322
1/2 CSSPR -41CX-4 +3 +3 2.00 .687 2.306 .840 .406 .562 .280 1.966 .11 SPG 422
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
127
Cartridges
Cartridges for inserts TPG, TPMR and TPU 90° Mount ~ M-Type
CTFPR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 l3 insert
1/4 CTFPR -41CX-2 +5 0 1.50 .531 1.965 .840 .406 .562 .280 1.625 .08 TPG 221
3/8 CTFPR -41CX-3 +5 0 2.00 .687 1.965 .840 .406 .562 .280 1.625 .10 TPG 322
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
128
Cartridges
Cartridges for inserts CNGP, CNMA, CNMM and CNMP 90° Mount ~ NL-Type
PCKNR/L PCLNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 insert
3/8 PCKNR -36CZ-3 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 CNMG 322
1/2 PCKNR -48CZ-4 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 CNMG 432
PCKNL -48CZ-4 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 CNMG 432
3/8 PCLNL -36CZ-3 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 CNMG 322
1/2 PCLNR -48CZ-4 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 CNMG 432
PCLNL -48CZ-4 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 CNMG 432
5/8 PCLNR -70CZ-5 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .18 CNMG 543
PCLNL -70CZ-5 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .18 CNMG 543
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
129
Cartridges
Cartridges for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM and DNMP 90° Mount ~ NL-Type
PDLNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 insert
1/2 PDLNR -70CZ-4 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .17 DNMG 432
PDLNL -70CZ-4 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .17 DNMG 432
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
130
Cartridges
Cartridges for inserts SNMA, SNMG, SNMM and SNMP 90° Mount ~ NL-Type
PSYNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 insert
3/8 PSYNR -36CZ-3 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 SNMG 322
PSYNL -36CZ-3 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 SNMG 322
1/2 PSYNR -48CZ-4 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 SNMG 432
5/8 PSYNR -70CZ-5 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .20 SNMG 543
PSYNL -70CZ-5 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .20 SNMG 543
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
131
Cartridges
Cartridges for inserts TNMA, TNMG, TNMM and TNMP 90° Mount ~ NL-Type
PTFNR/L PTLNR/L
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 insert
5/16 PTFNR -36CZ-2.5 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 TNMG 2.522
PTFNL -36CZ-2.5 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 TNMG 2.522
3/8 PTFNR -48CZ-3 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 TNMG 332
PTFNL -48CZ-3 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 TNMG 332
1/2 PTFNR -70CZ-4 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .17 TNMG 432
PTFNL -70CZ-4 -5 -13 2.375 .890 1.500 .375 .700 .875 .375 .17 TNMG 432
5/16 PTLNR -36CZ-2.5 -5 -13 1.187 .550 1.000 .280 .362 .475 .237 .04 TNMG 2.522
3/8 PTLNR -48CZ-3 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 TNMG 332
PTLNL -48CZ-3 -5 -13 1.625 .700 1.250 .280 .475 .560 .280 .08 TNMG 332
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
132
Cartridges
Cartridges for inserts VNGM, VNGP, VNMA, VNMG and VNMP 90° Mount ~ NL-Type
PVXNR
Dimensions in inch
Insert Min. Gage
Application I.C. Part No. γo° γp° Bore f1 l1 l2 h1 h h2 insert
3/8 PVXNR -70CZ-3 -9 -9 2.375 .890 1.500 .375 .700 .875 .375 .14 VNMG 332
Shank and
Insert size
Please check availability in current price and stock-list **Not supplied, note that mounting hole accepts inch or metric screw
133
Turning - Inserts
CCMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.5 1/4 3/32 .114 1/128-1/32
32.5 3/8 5/32 .177 1/128-1/32
43 1/2 3/16 .217 1/64-3/64
86 1 3/8 .342 3/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CCMT-FF1
CCMT 21.50.5-FF1 [
21.51-FF1 [
CCMT 32.50.5-FF1 [ [
32.51-FF1 [
32.52-FF1 [
CCMT-F1
CCMT 21.50.5-F1 [ [ [ [ [
21.51-F1 [ [ [ [ [
21.52-F1 [ [ [ [ [
CCMT 32.50.5-F1 [ [ [ [ [
32.51-F1 [ [ [ [ [ [
32.52-F1 [ [ [ [ [ [
CCMT 431-F1 [ [
432-F1 [ [ [
433-F1 [
CCMT...W-F1
CCMT 21.51W-F1 [
32.51W-F1 [
32.52W-F1 [
CCMT 431W-F1 [
432W-F1 [
CCMT-F2
CCMT 21.50.5-F2 [ [ [ [
21.51-F2 [ [ [ [
21.52-F2 [ [ [ [
CCMT 32.50.5-F2 [ [
32.51-F2 [ [ [ [
32.52-F2 [ [ [ [
CCMT 431-F2 [ [ [
432-F2 [ [ [ [
433-F2 [ [
CCMT 866-F2 [
[ Stock standard
Subject to change refer to current price and stock-list
134
Turning - Inserts
CDCB
Tolerances: Dimensions in inch
Size I.C. s h rε
I.C. = ±.001
s = ±.001
rε = ±.001 1.2 5/32 .040 .083 .002-.0156
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CDCB
CDCB 1.21.20 [ [ [
1.21.20.5 [ [ [
1.21.21 [ [ [
CNGP
Tolerances: Dimensions in inch
Size I.C. s h rε
I.C. = ±.001
s = ±.005
rε = ±.004 43 1/2 3/16 .203 .004-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
[ Stock standard
Subject to change refer to current price and stock-list
135
Turning - Inserts
CNMA, CNMG, CNMM, CNMP
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
32 3/8 1/8 .150 1/32
43 1/2 3/16 .203 1/64-1/16
54 5/8 1/4 .253 1/32-1/16
64 3/4 1/4 .313 1/32-3/32
86 1 3/8 .359 3/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CNMA
CNMA 431 [ [
432 [ [ [
432F [
433 [ [ [
434 [ [ [
CNMA 542 [
543 [ [
544 [ [
CNMA 642 [ [
643 [ [ [
643F [
644 [ [ [
CNMG-FF1
CNMG 431-FF1 [ [
432-FF1 [ [
CNMG-MF2
CNMG 321-MF2 [
322-MF2 [
CNMG 431-MF2 [ [ [
431-MF2(O) [
432-MF2 [ [ [
432-MF2(O) [
433-MF2 [ [
CNMG...W-MF2
CNMG 431W-MF2 [
432W-MF2 [
CNMG-MF3
CNMG 431-MF3 [ [ [
432-MF3 [ [ [ [ [
433-MF3 [ [ [ [ [
434-MF3 [ [
CNMG 542-MF3 [ [
543-MF3 [ [ [ [
CNMG-M2
CNMG 432-M2 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
136
Turning - Inserts
CNMA, CNMG, CNMM, CNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CNMG-M3
CNMG 321-M3 [
322-M3 [
CNMG 431-M3 [ [ [
431-M3(O) [
432-M3 [ [ [
432-M3(O) [ [
433-M3 [ [ [
433-M3(O) [
434-M3 [ [ [
CNMG 542-M3 [ [
543-M3 [ [
544-M3 [ [
CNMG 642-M3 [ [
643-M3 [ [
644-M3 [ [
CNMG...W-M3
CNMG 432W-M3 [ [
433W-M3 [ [
CNMG-M4
CNMG 432-M4 [
CNMG-M5(NEW)
CNMG 431-M5(NEW) [ [ [ [ [
432-M5(NEW) [ [ [ [ [ [ [
433-M5(NEW) [ [ [ [ [ [ [
434-M5(NEW) [ [ [ [ [ [ [
CNMG 542-M5(NEW) [ [ [ [
543-M5(NEW) [ [ [ [ [ [ [
544-M5(NEW) [ [ [ [ [ [ [
CNMG 642-M5(NEW) [ [ [ [ [
643-M5(NEW) [ [ [ [ [ [
644-M5(NEW) [ [ [ [ [ [
CNMG-MR3
CNMG 432-MR3 [ [ [ [
433-MR3 [ [ [ [
CNMG-MR4
CNMG 431-MR4 [ [
432-MR4 [ [
433-MR4 [ [
434-MR4 [ [
CNMG 542-MR4 [ [
543-MR4 [ [
CNMG 642-MR4 [
643-MR4 [ [
644-MR4 [ [
[ Stock standard
Subject to change refer to current price and stock-list
137
Turning - Inserts
CNMA, CNMG, CNMM, CNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CNMG-MR7
CNMG 432-MR7 [ [ [ [ [
433-MR7 [ [ [ [ [
434-MR7 [ [ [ [
CNMG 542-MR7 [
543-MR7 [ [ [ [ [
544-MR7 [ [ [ [
CNMG 642-MR7 [ [
643-MR7 [ [ [ [ [
644-MR7 [ [ [ [ [
CNMG 866-MR7 [ [
CNMM-R4
CNMM 431-R4 [
432-R4 [ [ [
433-R4 [ [ [ [
434-R4 [
CNMM 543-R4 [ [ [
544-R4 [ [ [
CNMM 643-R4 [ [ [
644-R4 [ [ [
646-R4 [ [
CNMM-R6
CNMM 432-R6 [ [ [
433-R6 [ [
CNMM 543-R6 [ [
CNMM 643-R6 [ [
CNMM-R7
CNMM 543-R7 [ [
544-R7 [ [
546-R7 [
CNMM 643-R7 [ [
644-R7 [ [
646-R7 [ [
CNMM-R8
CNMM 433-R8 [
CNMM-RR9
CNMM 644-RR9 [ [
CNMM-57
CNMM 643-57 [ [
644-57 [ [
646-57 [ [
[ Stock standard
Subject to change refer to current price and stock-list
138
Turning - Inserts
CNMA, CNMG, CNMM, CNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CNMP-MF1
CNMP 431-MF1 [ [ [ [ [
432-MF1 [ [ [ [ [
CNMP-M1
CNMP 431-M1 [ [
432-M1 [ [
433-M1 [
CNMP 542-M1 [
543-M1 [
CNMP 642-M1 [ [
643-M1 [
[ Stock standard
Subject to change refer to current price and stock-list
139
Turning - Inserts
CPMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.5 1/4 3/32 .114 .004-1/32
32.5 3/8 5/32 .177 .004-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
CPMT-F1
CPMT 21.50-F1 [ [
21.50.5-F1 [ [
21.51-F1 [ [ [ [
21.52-F1 [ [
CPMT 32.50-F1 [ [
32.50.5-F1 [ [ [
32.51-F1 [ [ [ [
32.52-F1 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
140
Turning - Inserts
DCMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.5 1/4 3/32 .114 1/128-1/32
32.5 3/8 5/32 .177 1/128-1/32
43 1/2 3/16 .220 1/64-3/64
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
DCMT-FF1
DCMT 21.51-FF1 [
DCMT 32.50.5-FF1 [
32.51-FF1 [
32.52-FF1 [ [
DCMT-F1
DCMT 21.50.5-F1 [ [ [ [
21.51-F1 [ [ [ [ [
21.52-F1 [ [
DCMT 32.50.5-F1 [ [ [ [
32.51-F1 [ [ [ [ [ [
32.52-F1 [ [ [ [ [
32.53-F1 [
DCMT-F2
DCMT 21.50.5-F2 [ [ [ [
21.51-F2 [ [ [ [
21.52-F2 [ [ [ [
DCMT 32.50.5-F2 [ [
32.51-F2 [ [ [ [
32.52-F2 [ [ [ [
DCMT 431-F2 [ [ [
432-F2 [ [ [
433-F2 [ [
[ Stock standard
Subject to change refer to current price and stock-list
141
Turning - Inserts
DNGM, DNGP, DNMA, DNMG, DNMM, DNMP
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
33 3/8 3/16 .150 1/64-3/64
43 1/2 3/16 .203 1/128-3/64
44 1/2 1/4 .203 1/64-1/16
54 5/8 1/4 .253 1/32-3/64
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
DNGM-MF1
DNGM 431F-MF1 [ [ [
432-MF1 [
432F-MF1 [
442-MF1 [
DNGP-M1
DNGP 430.5F-M1 [ [
431F-M1 [ [
432F-M1 [ [
DNMA
DNMA 332 [ [
333 [ [
DNMA 432 [ [ [
433 [ [ [
442 [ [
443 [ [
444 [
DNMG-FF1
DNMG 431-FF1 [ [
441-FF1 [ [
DNMG-MF2
DNMG 331-MF2 [ [ [ [
332-MF2 [ [ [ [
333-MF2 [ [
DNMG 431-MF2 [ [ [
431-MF2(O) [
432-MF2 [ [ [
432-MF2(O) [
433-MF2 [ [
441-MF2 [ [ [
441-MF2(O) [
442-MF2 [ [ [
442-MF2(O) [
443-MF2 [ [
DNMG-MF3
DNMG 331-MF3 [ [
332-MF3 [ [
333-MF3 [
DNMG 431-MF3 [ [ [
432-MF3 [ [ [ [
433-MF3 [ [
441-MF3 [ [ [
442-MF3 [ [ [ [
443-MF3 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
142
Turning - Inserts
DNGM, DNGP, DNMA, DNMG, DNMM, DNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
DNMG-M3
DNMG 330.5-M3 [
331-M3 [ [ [
332-M3 [ [ [
333-M3 [ [
DNMG 431-M3 [ [
431-M3(O) [
432-M3 [ [ [
433-M3 [ [ [
432-M3(O) [
441-M3 [ [ [
442-M3 [ [ [
443-M3 [ [ [
444-M3 [ [
DNMG-M5
DNMG 542-M5 [
543-M5 [ [
DNMG-M5(NEW)
DNMG 332-M5(NEW) [ [
333-M5(NEW) [ [
DNMG 431-M5(NEW) [ [
432-M5(NEW) [ [ [ [ [
433-M5(NEW) [ [ [ [ [
442-M5(NEW) [ [ [ [ [
443-M5(NEW) [ [ [ [ [
444-M5(NEW) [ [ [ [
DNMG 542-M5(NEW) [ [ [
543-M5(NEW) [ [ [
DNMG-MR3
DNMG 432-MR3 [ [ [ [
433-MR3 [ [
442-MR3 [ [ [
DNMG-MR4
DNMG 432-MR4 [ [
433-MR4 [ [
DNMG 542-MR4 [
543-MR4 [
DNMG-MR7
DNMG 432-MR7 [ [ [ [
433-MR7 [ [ [
442-MR7 [ [ [ [
443-MR7 [ [ [
DNMG-69
DNMG 442-69 [
[ Stock standard
Subject to change refer to current price and stock-list
143
Turning - Inserts
DNGM, DNGP, DNMA, DNMG, DNMM, DNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
DNMM-R4
DNMM 442-R4 [ [ [
443-R4 [ [
444-R4 [ [
DNMM-R6
DNMM 441-R6 [
442-R6 [
DNMP-MF1
DNMP 331-MF1 [
332-MF1 [
DNMP 431-MF1 [ [ [
432-MF1 [ [ [
441-MF1 [ [ [ [
442-MF1 [ [ [ [
DNMP-M1
DNMP 431-M1 [ [
432-M1 [ [
433-M1 [ [
DNMP 543-M1 [
[ Stock standard
Subject to change refer to current price and stock-list
144
Turning - Inserts
DPMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
32.5 3/8 5/32 .177 1/128-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
DPMT
DPMT 32.50.5-F1 [
32.51-F1 [
32.52-F1 [ [
[ Stock standard
Subject to change refer to current price and stock-list
145
Turning - Inserts
RCGS
Tolerance: Dimensions in inch
Size I.C. s
I.C. = ±.001
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
RCGS-46
RCGS 1.5-46 [ [ [
1.5F-46 [ [
RCGS 2-46 [ [ [
2F-46 [ [
RCGS 3-46 [ [ [
3F-46 [ [
RCGS 4-46 [ [ [
4F-46 [ [
RCGS-PS
RCGS 1.5-PS [ [
1.5F-PS [ [
RCGS 2-PS [ [
2F-PS [ [
RCGS 3-PS [ [
3F-PS [ [
RCGS 4F-PS [ [
[ Stock standard
Subject to change refer to current price and stock-list
146
Turning - Inserts
RCMM, RCMT
Tolerance: Dimensions in inch
Size I.C. s h
s = ±.005
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
RCMM-46
RCMM 43-46 [ [ [ [ [
RCMM 54-46 [
RCMM 64-46 [ [ [ [
RCMM 84-46 [ [
RCMT-F1
RCMT 22-F1(O) [ [
32.5-F1 [
32.5-F1(O) [ [
RCMT 43-F1 [
43-F1(O) [
RCMT 0602M0-F1 [ [
RCMT 0803M0-F1 [ [ [
RCMT 10T3M0-F1 [ [ [ [ [
RCMT 1204M0-F1 [ [ [ [ [
RCMT 1606M0-F1 [ [
RCMT-F2
RCMT 0602M0-F2 [ [
RCMT 0803M0-F2 [ [
RCMT 10T3M0-F2 [ [ [
RCMT 1204M0-F2 [ [
RCMT 1606M0-F2 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
147
Turning - Inserts
RCMX
Tolerance: Dimensions in inch
Size I.C. s h
s = ±.005
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
RCMX
RCMX 1204M0 [
RCMX 1606M0 [
160600 [
RCMX 200600 [ [ [ [
RCMX 250700 [ [ [ [
RCMX 320900 [ [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
148
Turning - Inserts
RNMA, RNMG
Tolerance: Dimensions in inch
Size I.C. s h
s = ±.005
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
RNMA
RNMA 43 [ [ [
RNMA 54 [
RNMA 64 [
64F [
RNMG-M3
RNMG 43-M3 [ [ [
RNMG-M5
RNMG 43-M5 [
RNMG 64-M5 [
RNMG-MR4
RNMG 32-MR4 [
RNMG 43-MR4 [ [ [
RNMG 64-MR4 [ [ [
RNMG 84-MR4 [
86-MR4 [
[ Stock standard
Subject to change refer to current price and stock-list
149
Turning - Inserts
SCMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
32.5 3/8 5/32 .177 1/64-1/32
43 1/2 3/16 .217 1/32-3/64
86 1 3/8 .342 3/32
126 1 1/2 3/8 .342 1/8
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SCMT-F1
SCMT 32.51-F1 [ [ [ [ [
32.52-F1 [ [ [ [ [ [
32.53-F1 [ [
SCMT 432-F1 [ [ [ [ [ [
433-F1 [ [ [
SCMT-F2
SCMT 32.51-F2 [ [
32.52-F2 [ [
SCMT 432-F2 [ [
SCMT 866-F2 [
SCMT 1268T-F2 [ [
[ Stock standard
Subject to change refer to current price and stock-list
150
Turning - Inserts
SNMA, SNMG, SNMM, SNMP
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
32 3/8 1/8 .150 1/32-3/64
43 1/2 3/16 .203 1/64-1/16
54 5/8 1/4 .253 1/32-1/16
64 3/4 1/4 .313 1/32-3/32
85 1 5/16 .363 3/32
86 1 3/8 .363 3/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SNMA
SNMA 322 [ [
322F [
SNMA 432 [ [ [
432F [
433 [ [ [
434 [ [ [
434F [
SNMA 543 [ [
544 [
SNMA 643 [ [ [
644 [ [ [
644F [
SNMG-MF2
SNMG 321-MF2 [
322-MF2 [
SNMG 432-MF2 [ [ [
432-MF2(O) [
433-MF2 [ [
433-MF2(O) [
SNMG-MF3
SNMG 432-MF3 [ [ [ [
433-MF3 [ [ [ [
SNMG-M3
SNMG 431-M3 [ [ [
432-M3 [ [ [
432-M3(O) [
433-M3 [ [ [
433-M3(O) [
434-M3 [ [ [
SNMG 543-M3 [
544-M3 [
SNMG 643-M3 [ [ [
644-M3 [ [
[ Stock standard
Subject to change refer to current price and stock-list
151
Turning - Inserts
SNMA, SNMG, SNMM, SNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SNMG-M5(NEW)
SNMG 322-M5(NEW) [
SNMG 432-M5(NEW) [ [ [ [ [ [ [
433-M5(NEW) [ [ [ [ [ [ [
434-M5(NEW) [ [ [ [
SNMG 542-M5(NEW) [ [ [
543-M5(NEW) [ [ [ [ [
544-M5(NEW) [ [ [ [ [
SNMG 643-M5(NEW) [ [ [ [ [ [
644-M5(NEW) [ [ [ [ [ [
SNMG-MR3
SNMG 432-MR3 [ [ [
433-MR3 [ [ [
SNMG 644-MR3 [ [ [ [
SNMG-MR4
SNMG 322-MR4 [ [ [
SNMG 432-MR4 [ [ [
433-MR4 [ [
434-MR4 [ [
SNMG 543-MR4 [ [
SNMG 643-MR4 [ [
644-MR4 [ [
SNMG 866-MR4 [ [
SNMG-MR7
SNMG 432-MR7 [ [ [ [
433-MR7 [ [ [ [ [
434-MR7 [ [ [
SNMG 543-MR7 [ [ [
544-MR7 [ [ [
SNMG 643-MR7 [ [ [
644-MR7 [ [ [ [
SNMG 866-MR7 [ [ [
SNMG-69
SNMG 432-69 [
SNMM-R4
SNMM 432-R4 [ [ [
433-R4 [ [ [
SNMM 543-R4 [ [
544-R4 [ [
SNMM 643-R4 [ [
644-R4 [ [ [
646-R4 [ [
[ Stock standard
Subject to change refer to current price and stock-list
152
Turning - Inserts
SNMA, SNMG, SNMM, SNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SNMM-R6
SNMM 432-R6 [ [
433-R6 [
SNMM 643-R6 [
644-R6 [ [
SNMM-R7
SNMM 543-R7 [
544-R7 [ [
546-R7 [ [
SNMM 643-R7 [ [
644-R7 [ [ [
646-R7 [ [
SNMM 856-R7 [ [
866-R7 [ [
SNMM-R8
SNMM 433-R8 [
SNMM-RR9
SNMM 644-RR9 [
SNMM-57
SNMM 643-57 [ [
644-57 [ [
646-57 [ [
SNMM 856-57 [ [
SNMP-M1
SNMP 432-M1 [ [
433-M1 [ [
SNMP 543-M1 [ [
SNMP 644-M1 [ [
SNMP-MF1
SNMP 432-MF1 [ [ [ [ [
433-MF1 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
153
Turning - Inserts
SNG, SNU
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.004
32 3/8 1/8 1/32
43 1/2 3/16 1/32-1/16
63 3/4 3/16 3/64-1/16
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SNG
SNG 322 [
SNG 633 [
SNG 634 [
SNG 634F [
SNU
SNU 432 [
433 [ [ [ [
433F [
434 [ [
SNU 633 [
SPMM
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
32 3/8 1/8 .165 1/32
43 1/2 3/16 .203 1/32-3/64
54 5/8 1/4 .253 3/64
64 3/4 1/4 .313 1/32-1/16
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
SPMM 432-46 [ [ [
433-46 [
SPMM 543-46 [ [
SPMM 642-46 [
644-46 [
[ Stock standard
Subject to change refer to current price and stock-list
154
Turning - Inserts
SPG, SPMR, SPU
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.004
32 3/8 1/8 1/64-3/64
42 1/2 1/8 1/64-1/16
43 1/2 3/16 3/64
53 5/8 3/16 3/64
63 3/4 3/16 1/32-1/8
84 1 1/4 5/64
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SPG
SPG 321F [
322 [
322F [
323F [
SPG 421F [ [
422 [ [ [ [ [
422F [ [ [
423F [
424F [
433F [
SPG 632 [
632F [
633 [ [
633F [
634 [
634F [
638F [
SPMR-FF1
SPMR 322-FF1 [
SPMR-F1
SPMR 321-F1 [ [
322-F1 [ [ [
SPMR 421-F1 [ [ [
422-F1 [ [ [
423-F1 [
SPMR-F2
SPMR 422-F2 [ [
423-F2 [
[ Stock standard
Subject to change refer to current price and stock-list
155
Turning - Inserts
SPG, SPMR, SPU
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SPU
SPU 321 [
322 [ [ [
SPU 421 [
422 [ [ [ [
423 [ [
SPU 533 [ [
SPU 633F [
SPU 845T [
[ Stock standard
Subject to change refer to current price and stock-list
156
Turning - Inserts
SPMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
32 3/8 5/32 .177 1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
SPMT-F1
SPMT 32.52-F1 [
[ Stock standard
Subject to change refer to current price and stock-list
157
Turning - Inserts
TCMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.5 1/4 3/32 .114 1/128-1/32
32.5 3/8 5/32 .177 1/128-3/64
43 1/2 3/16 .217 1/64-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TCMT-F1
TCMT 21.50.5-F1 [ [
21.50.5-F1(O) [
21.51-F1 [ [ [
21.51-F1(O) [
21.52-F1 [ [ [ [ [
21.52-F1(O) [
TCMT 32.50.5-F1 [ [
32.50.5-F1(O) [
32.51-F1 [ [ [
32.52-F1 [ [ [ [ [ [
32.53-F1 [ [
TCMT-F2
TCMT 32.51-F2 [ [ [
32.52-F2 [ [ [ [
TCMT 431-F2 [
432-F2 [
[ Stock standard
Subject to change refer to current price and stock-list
158
Turning - Inserts
TDAB
Tolerances: Dimensions in inch
Size I.C. s h rε
I.C. = ±.001
s = ±.001
rε = ±.001 1.21.5 5/32 .047 .093 .002-.0156
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TDAB
TDAB 1.21.50 [ [ [
1.21.50.5 [ [ [
1.21.51 [ [ [
TDCH
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.001
I.C. = ±.001
rε = ±.001 1.21.5 5/32 .047 .093 .008-.0156
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Right-hand shown
[ Stock standard Note: R.H. inserts used in L.H bars, L.H. inserts used in R.H. bars.
Subject to change refer to current price and stock-list
159
Turning - Inserts
TNG, TNU
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.004
32 3/8 1/8 1/32
33 3/8 3/16 1/32-1/16
43 1/2 3/16 3/64
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TNG
TNG 322F [
TNG 433F [
TNU
TNU 332 [
333 [ [
334 [ [
[ Stock standard
Subject to change refer to current price and stock-list
160
Turning - Inserts
TNMA, TNMG, TNMM, TNMP
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
22 1/4 1/8 .090 1/64-1/32
32 3/8 1/8 .150 1/64-3/32
33 3/8 3/16 .150 1/64-1/16
43 1/2 3/16 .203 1/64-1/8
54 5/8 1/4 .253 1/32-1/8
66 3/4 3/8 .313 3/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TNMA
TNMA 222F [
321F [
322 [
322F [
323F [
331 [ [
332 [ [ [
333 [ [ [
334 [ [
TNMA 431F [
432 [ [ [
432F [
433 [ [ [
434 [ [ [
438 [
TNMA 543 [
544 [ [
544F [
TNMG-FF1
TNMG 331-FF1 [ [ [
332-FF1 [ [
TNMG-MF2
TNMG 221-MF2 [
222-MF2 [
TNMG 331-MF2 [ [ [
331-MF2(O) [
332-MF2 [ [ [
332-MF2(O) [
333-MF2 [ [
TNMG 431-MF2 [ [ [
432-MF2 [ [ [
433-MF2 [ [ [
TNMG-MF3
TNMG 322-MF3 [
331-MF3 [ [ [
332-MF3 [ [ [ [ [
333-MF3 [ [ [ [
TNMG 431-MF3 [
432-MF3 [ [ [ [
433-MF3 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
161
Turning - Inserts
TNMA, TNMG, TNMM, TNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TNMG-M2
TNMG 433-M2 [
TNMG 543-M2 [
544-M2 [
TNMG-M3
TNMG 331-M3 [ [ [
332-M3 [ [ [
332-M3(O) [ [
333-M3 [ [ [
333-M3(O) [
TNMG 432-M3 [ [ [
433-M3 [ [
434-M3 [ [ [
TNMG 543-M3 [ [
TNMG-M5
TNMG 322-M5 [
TNMG-M5(NEW)
TNMG 322-M5(NEW) [ [ [
331-M5(NEW) [ [
332-M5(NEW) [ [ [ [ [ [ [
333-M5(NEW) [ [ [ [ [ [ [
334-M5(NEW) [
TNMG 431-M5(NEW) [ [ [
432-M5(NEW) [ [ [ [ [ [
433-M5(NEW) [ [ [ [ [ [
434-M5(NEW) [ [ [ [ [
TNMG 542-M5(NEW) [ [ [
543-M5(NEW) [ [ [ [ [
544-M5(NEW) [ [ [ [
TNMG-MR3
TNMG 333-MR3 [ [ [
TNMG 433-MR3 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
162
Turning - Inserts
TNMA, TNMG, TNMM, TNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TNMG-MR4
TNMG 221-MR4 [ [
222-MR4 [ [ [
TNMG 321-MR4 [ [ [
322-MR4 [ [ [
323-MR4 [
324-MR4 [ [
326-MR4 [ [
332-MR4 [ [
TNMG 431-MR4 [ [
432-MR4 [ [ [
433-MR4 [ [
434-MR4 [ [ [
436-MR4 [ [
438-MR4 [ [
TNMG 542-MR4 [ [ [
543-MR4 [ [ [
544-MR4 [ [ [
548-MR4 [ [ [
TNMG 666-MR4 [ [ [
TNMG-MR7
TNMG 332-MR7 [ [ [ [ [
333-MR7 [ [ [ [
TNMG 432-MR7 [ [ [ [
433-MR7 [ [ [ [
434-MR7 [ [ [ [
436-MR7 [
TNMG 543-MR7 [ [ [
544-MR7 [ [
TNMG 666-MR7 [ [ [ [
TNMG-69
TNMG 332-69 [
TNMM-R4
TNMM 332-R4 [ [ [
333-R4 [ [ [
TNMM 432-R4 [ [ [
433-R4 [ [ [
434-R4 [ [ [
TNMM-R6
TNMM 331-R6 [
332-R6 [ [
333-R6 [
TNMM 432-R6 [ [
433-R6 [ [
434-R6 [
[ Stock standard
Subject to change refer to current price and stock-list
163
Turning - Inserts
TNMA, TNMG, TNMM, TNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TNMP-M1
TNMP 321-M1 [ [
322-M1 [
332-M1 [ [
TNMP 431-M1 [
432-M1 [ [
433-M1 [ [
434-M1 [ [
TNMP 544-M1 [
TNMP 666-M1 [
TNMP-MF1
TNMP 331-MF1 [
332-MF1 [ [ [ [
333-MF1 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
164
Turning - Inserts
TPG, TPGA, TPU
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21 1/4 3/32 - 1/64
22 1/4 1/8 - 1/64-1/32
32 3/8 1/8 - .004-1/16
43 1/2 3/16 - .004-1/16
TPGA 211 1/4 3/32 .125 1/64
TPGA 322 3/8 1/8 .156 1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TPG
TPG 211 [
221 [
221F [
222 [
222F [ [
TPG 320F [
321 [ [ [ [
321F [ [ [ [
322 [ [ [ [ [ [
322F [ [ [ [
323F [
324F [ [
TPG 430F [
431 [ [ [
431F [ [ [
432 [ [ [ [
432F [ [ [
433 [ [
433F [
434 [
434F [ [ [
TPGA
TPGA 211 [
211F [
TPGA 322F [
TPU
TPU 221 [ [ [ [
222 [ [ [
TPU 321 [ [ [ [ [
322 [ [ [ [ [
322F [
323 [ [ [ [
TPU 431
432 [ [ [ [
433 [ [
[ Stock standard
Subject to change refer to current price and stock-list
165
Turning - Inserts
TPMM
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
2.52 5/16 1/8 .105 1/64-1/32
32 3/8 1/8 .165 1/64-1/16
43 1/2 3/16 .203 1/64-1/16
54 5/8 1/4 .253 1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TPMM-46
TPMM 2.521-46 [ [ [
2.522-46 [ [ [
TPMM 321-46 [ [ [
322-46 [ [ [ [
323-46 [ [
324-46 [
TPMM 431-46 [ [ [
432-46 [ [ [
433-46 [
434-46 [ [ [
TPMM 542-46 [
[ Stock standard
Subject to change refer to current price and stock-list
166
Turning - Inserts
TPMR
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.004
22 1/4 1/8 1/64-1/32
32 3/8 1/8 1/64-3/64
43 1/2 3/16 1/32-3/64
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TPMR-FF1
TPMR 221-FF1 [
222-FF1 [
TPMR 321-FF1 [
322-FF1 [
TPMR-F1
TPMR 221-F1 [ [ [ [
222-F1 [ [ [
TPMR 321-F1 [ [ [
322-F1 [ [ [
323-F1 [
TPMR-F2
TPMR 321-F2 [
322-F2 [ [ [
323-F2 [
TPMR 432-F2 [ [
433-F2 [
[ Stock standard
Subject to change refer to current price and stock-list
167
Turning - Inserts
TPMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.5 1/4 3/32 .114 1/64-1/32
32.5 3/8 5/32 .177 1/64-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
TPMT-F1
TPMT 21.51-F1 [ [
21.52-F1 [ [
TPMT 32.51-F1 [ [
32.52-F1 [ [
[ Stock standard
Subject to change refer to current price and stock-list
168
Turning - Inserts
VBMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.5 1/4 3/32 .114 1/128-1/32
33 3/8 3/16 .173 1/128-3/64
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
VBMT-F1
VBMT 21.50.5-F1 [ [ [ [
21.51-F1 [ [ [ [ [
21.52-F1 [ [ [
VBMT 330.5-F1 [
331-F1 [ [ [ [ [
332-F1 [ [ [ [
333-F1 [
VBMT-F2
VBMT 331-F2 [ [ [ [
332-F2 [ [ [ [
333-F2 [ [ [
VCGR
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.004
33 3/8 3/16 1/64-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
[ Stock standard
Subject to change refer to current price and stock-list
169
Turning - Inserts
VNGM, VNGP, VNMA, VNMG, VNMP
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
2.53 5/16 3/16 .150 1/64-3/64
33 3/8 3/16 .150 1/128-3/64
43 1/2 3/16 .233 1/64-1/16
43-203 1/2 3/16 .203 1/64-1/16
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
VNGM-MF1
VNGM 331-MF1 [
331F-MF1 [ [ [
332-MF1 [
332F-MF1 [ [ [
VNGP-M1
VNGP 330.5F-M1 [ [
331F-M1 [ [
332F-M1 [ [
VNGP 432F-M1-203 [ [
VNMA
VNMA 332 [
333 [
VNMG-FF1
VNMG 331-FF1 [
VNMG-MF2
VNMG 2.531-MF2 [ [
VNMG 331-MF2 [ [
332-MF2 [ [
333-MF2 [ [
VNMG-MF3
VNMG 331-MF3 [ [
332-MF3 [ [
VNMG 432-MF3-203 [
VNMG-M3
VNMG 2.531-M3 [ [ [
2.532-M3 [ [ [
2.533-M3 [
VNMG 331-M3 [ [ [
332-M3 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
170
Turning - Inserts
VNGM, VNGP, VNMA, VNMG, VNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
VNMG-MR4
VNMG 332-MR4 [ [
333-MR4 [ [
VNMG 431-MR4 [ [
431-MR4-203 [
432-MR4 [ [ [
432-MR4-203 [ [
433-MR4 [
433-MR4-203 [
434-MR4 [
434-MR4-203 [
VNMP-M1
VNMP 331-M1 [ [
332-M1 [ [
[ Stock standard
Subject to change refer to current price and stock-list
171
Turning - Inserts
WCMT
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .004
rε = ± .004
32.5 3/8 5/32 .177 1/128-1/32
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
WCMT-F1
WCMT 32.50.5-F1 [
32.51-F1 [
32.52-F1 [ [
WCMT...W-F1
WCMT 32.51W-F1 [
32.52W-F1 [
[ Stock standard
Subject to change refer to current price and stock-list
172
Turning - Inserts
WNGP, WNMA, WNMG, WNMM, WNMP
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
33 3/8 3/16 .150 1/128-3/64
43 1/2 3/16 .203 1/64-1/16
44 1/2 1/4 .203 1/32-1/16
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
WNGP-MF1
WNGP 330.5-MF1 [ [ [
WNMA
WNMA 332 [ [ [
333 [ [ [
WNMA 432 [ [ [
433 [ [ [
434 [
442 [
443 [
444 [
WNMG-MF2
WNMG 331-MF2 [ [ [
331-MF2(O) [
332-MF2 [ [ [
332-MF2(O) [
333-MF2 [ [
WNMG 431-MF2 [ [ [ [
432-MF2 [ [ [
432-MF2(O) [
433-MF2 [ [
WNMG...W-MF2
WNMG 331W-MF2 [
332W-MF2 [
WNMG 431W-MF2 [
432W-MF2 [
WNMG-MF3
WNMG 331-MF3 [ [
332-MF3 [ [ [ [
333-MF3 [ [ [
WNMG 431-MF3 [ [ [ [
432-MF3 [ [ [ [ [
433-MF3 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
173
Turning - Inserts
WNGP, WNMA, WNMG, WNMM, WNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
WNMG-M3
WNMG 330.5-M3 [
331-M3 [ [ [
332-M3 [ [ [
332-M3(O) [
333-M3 [ [ [
333-M3(O) [
WNMG 431-M3 [ [ [
431-M3(O) [
432-M3 [ [ [
432-M3(O) [
433-M3 [ [ [
434-M3 [ [
442-M3 [ [
443-M3 [ [
444-M3 [
WNMG...W-M3
WNMG 332W-M3 [ [
333W-M3 [ [
WNMG 432W-M3 [ [
433W-M3 [ [
WNMG-M5(NEW)
WNMG 332-M5(NEW) [ [ [ [ [
333-M5(NEW) [ [ [ [ [
WNMG 432-M5(NEW) [ [ [ [ [ [ [
433-M5(NEW) [ [ [ [ [ [ [
434-M5(NEW) [ [ [ [ [
442-M5(NEW) [ [ [ [ [
443-M5(NEW) [ [ [ [ [
444-M5(NEW) [ [ [ [ [
WNMG-MR3
WNMG 332-MR3 [ [ [
333-MR3 [ [ [
WNMG-MR7
WNMG 432-MR7 [ [ [ [
433-MR7 [ [ [ [
434-MR7 [
WNMM-R6
WNMM 432-R6 [ [ [
433-R6 [ [ [
WNMM-R7
WNMM 443-R7 [ [
444-R7 [ [
[ Stock standard
Subject to change refer to current price and stock-list
174
Turning - Inserts
WNGP, WNMA, WNMG, WNMM, WNMP
Grades
Coated Uncoated Cermet
CP200
CP250
CP500
TP100
TP200
TP300
TP400
TX100
TX150
S25M
CP20
CP25
CP50
TP30
TP40
370
516
883
890
CM
HX
CR
Inserts Part No.
WNMP-MF1
WNMP 331-MF1 [ [ [ [ [
332-MF1 [ [ [ [ [
333-MF1 [ [ [
WNMP 431-MF1 [ [
432-MF1 [ [
WNMP-M1
WNMP 431-M1 [
432-M1 [
433-M1 [
[ Stock standard
Subject to change refer to current price and stock-list
175
PCBN - Inserts
CCGW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
32.52 3/8 5/32 .177 1/32
32.53 3/8 5/32 .177 3/64
431 1/2 3/16 .217 1/64
432 1/2 3/16 .217 1/32
433 1/2 3/16 .217 3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
CCGW
CCGW 32.52S-L0 [ SCGCR/L..3 ..-SCFCR/L..3
32.53S-L0 [ SCLCR/L..3 ..-SCLCR/L..3
SCNCN..3
CCGW 431S-L0 [
432S-L0 [ SCLCR/L..4 -
E = Honed
S = Chamfered and honed CCGW 432E-L1 [
CDCB
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.001
rε = ±.004
1.21 5/32 .040 .083 .002-.015
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
[ Stock standard
Subject to change refer to current price and stock-list
176
PCBN - Inserts
CCMW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ±.005
rε = ±.004
21.51 1/4 3/32 .114 1/64
21.52 1/4 3/32 .114 1/32
32.51 3/8 5/32 .177 1/64
32.52 3/8 5/32 .177 1/32
32.53 3/8 5/32 .177 3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
CCMW
CCMW 21.51E-L0 [ [ SCLCR/L..2 ..-SCFCR/L 2
21.52E-L0 [ [ SCGCR/L..2 ..-SCLCR/L..2
SCFCR/L..2
CCMW 21.51S-L0 [ SCRGR/L..2
21.52S-L0 [ [ SCNCN..2
E = Honed
S = Chamfered and honed CCMW 32.51E-L0 [ SCLCR/L..3 -..SCLCR/L 3
32.52E-L0 [ SCRCR/L..3 -..SCFCR/L 3
Tip sizes: SCFCR/L..3
See Technical Guide CCMW 32.51S-L0 [ SCGCR/L..3
32.52S-L0 [ SCMCN..3
32.53S-L0 [
CCMW 32.51E-L1 [ [
32.52E-L1 [ [
[ Stock standard
Subject to change refer to current price and stock-list
177
PCBN - Inserts
CNGA
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
431 1/2 3/16 .203 1/64
432 1/2 3/16 .203 1/32
433 1/2 3/16 .203 3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
CNGA
CNGA 431E-L0 [ MCLNR/L..4 ..-MCLNR/L 4
432E-L0 [ MCFNR/L..4
MCGNR/L..4
CNGA 431S-L0 [
432S-L0 [ [
433S-L0 [ [
E = Honed
S = Chamfered and honed
CNGA 431S-L1 [
WZ = Wiper geometry
432S-L1 [ [ [
Tip sizes: 433S-L1 [ [ [
See Technical Guide 434S-L1 [
CNGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
321 3/8 1/8 1/64
322 3/8 1/8 1/32
323 3/8 1/8 3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
CNGN 321S [
322S [
E = Honed 323S [
S = Chamfered and honed
Solid
[ Stock standard
Subject to change refer to current price and stock-list
178
PCBN - Inserts
CNMN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
32. 3/8 1/8 1/32-1/16
33. 3/8 3/16 1/16
42. 1/2 1/8 3/64-1/16
43. 1/2 3/16 1/32-1/16
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
CNMN
CNMN 322E [ CCLNR/L..3 ..-MCLNR/L 3
323E [
CNMN 322S [
323S [
E = Honed 324S [
S = Chamfered and honed
CNMN 334S [
WZ = Wiper geometry
CNMN 423E [ MCFNR/L..4* ..-MCLNR/L 4*
Solid MCLNR/L..4*
CNMN 423S [ MCGNR/L..4*
424S [ MCKNR/L..4*
MCMNN..4*
CNMN 433S [ MCRNR/L..4*
433S-015/15 [
434S [
434S-015/15 [
179
PCBN - Inserts
DCMW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
32.5. 3/8 5/32 .177 1/64-1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
DCMW
DCMW 32.51S-L0 [ SDJCR/L..3* ..-SDQCR/L 3*
32.52S-L0 [ SDPCN..3* ..-SDUCR/L 3*
Tip sizes:
See Technical Guide
DNGA
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
43. 1/2 3/16 .203 1/64-3/64
44. 1/2 1/4 .203 1/64-3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
DNGA 441S-L1 [
442S-L1 [ [ [
443S-L1 [ [
180
PCBN - Inserts
DNGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
32. 3/8 1/8 1/64-3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
DNGN
DNGN 321E [ MDJNR/L..3* -..MDUNR/L 3*
322E [ MDQNR/L..3*
MDPNN..3*
DNGN 321S [
322S [
E = Honed 323S [
S = Chamfered and honed
Solid
DNMN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
32. 3/8 1/8 1/32-1/16
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Solid
181
PCBN - Inserts
RCGS
Tolerance: Dimensions in inch
Size I.C. s
s = ± .005
2 1/4 .359
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
RCGS
RCGS 2S-LF [ TRAOR/L..2 -
TRGOR/L..2
TROON..2
[ Stock standard
Subject to change refer to current price and stock-list
182
PCBN - Inserts
RNGN-LF
Tolerance: Dimensions in inch
Size I.C. s
s = ± .005
22 1/4 1/8
32 3/8 1/8
43 1/2 3/16
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
RNGN-LF
RNGN 22S-LF [ [ CRDNN..2 ..-CRGNR/L 2
32S-LF [ [ [ CRDNN..3 ..-CRGNR/L 3
43S-LF [ CRDNN..4** ..-CRGNR/L 4*
CRGNR/L..2
CRGNR/L..3
S = Chamfered and honed CRGNR/L..4**
LF = Complete top layer MRGNR/L..3
MRGNR/L..4*
MRGOR/L..4*
*See page 195 for optional parts ** Anvil 117.10-621 for RNGN 43, must be ordered separately.
RNGN
Tolerance: Dimensions in inch
Size I.C. s
s = ± .005
22 1/4 1/8
32 3/8 1/8
42 1/2 1/8
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
183
PCBN - Inserts
RNMN
Tolerance: Dimensions in inch
Size I.C. s
s = ± .005
22 1/4 1/8
32 3/8 1/8
42 1/2 1/8
43 1/2 3/16
83 1.0 3/16
84 1.0 1/4
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
RNMN
RNMN 32E [ CRDNN..2 ..CRGNR/L 2
42E [ CRDNN..3 ..CRGNR/L 3
CRDNN..4 ..CRGNR/L 4
RNMN 22S [ CRDNN..8
32S [
E = Honed 42S [ CRGNR/L..2
S = Chamfered and honed CRGNR/L..3
43S [
CRGNR/L..4**
43S-015/15 [
Solid 83S-06/20 [ MRGNR/L..3
84S-06/20 [ MRGNR/L..4*
MRGOR/L..4*
MRGOR/L..8
184
PCBN - Inserts
SCMN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
32. 3/8 1/8 1/32
33. 3/8 3/16 1/32
43. 1/2 3/16 1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
SCMN
SCMN 322S-WZ [ - -
SCMN 332S-WZ [
432S-WZ [
Solid
SNGA
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
43. 1/2 3/16 .203 1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
185
PCBN - Inserts
SNGN-LF
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
323 3/8 1/8 3/64
43. 1/2 3/16 1/32-1/16
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
SNGN-LF
SNGN 323S-LF [ CSDNN..4** ..CSKNR/L 3
432S-LF [ CSKNR/L..4** ..CSKNR/L 4**
433S-LF [ MSDNN..3* ..MSKNR/L 4*
434S-LF [ MSDNN..4*
MSKNR/L..3*
MSKNR/L..4*
S = Chamfered and honed MSRNR/L..3*
LF = Complete top layer MSRNR/L..4*
MSSNR/L..4*
*See page 195 for optional parts **Alternate anvil for SNMN43 to be ordered separately - 174.10-621
SNGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
22. 1/4 1/8 1/64-1/32
32. 3/8 1/8 1/64-3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
[ Stock standard
Subject to change refer to current price and stock-list
186
PCBN - Inserts
SNMN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
22. 1/4 1/8 1/32
32. 3/8 1/8 1/32-1/16
33. 3/8 3/16 1/32-1/16
42. 1/2 1/8 1/32-1/16
43. 1/2 3/16 1/32-1/16
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
SNMN
SNMN 222E [ MSKNR/L..3 ..-CSKNR/L 3
322E [ MSKNR/L..4* ..-CSKNR/L 4**
323E [ ..-MSKNR/L 4*
MSRNR/L..3
SNMN 422E [ MSRNR/L..4*
E = Honed 434E [
CSDNN..4**
S = Chamfered and honed
WZ = Wiper geometry SNMN 222S [
CSKNR/L..4**
Solid SNMN 322S [ MSDNN..3
323S [ MSDNN..4*
324S [
322S-WZ [ MSSNR/L..4*
322S-WZ-85 [
332S-WZ [
334S [
SNMN 422S [
423S [
424S [
432S-WZ [
432S-WZ-85 [
433S [
433S-015/15 [
434S [
434S-015/15 [
187
PCBN - Inserts
TCGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
1.2 5/32 .047 1/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
TCGN
TCGN 1.211E-LF [ CTLNR/L..1.2 -
CTLCR/L..1.2
E = Honed
LF = Complete top layer
TCMW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε ± .004
21.5. 1/4 3/32 .110 1/64-132
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
[ Stock standard
Subject to change refer to current price and stock-list
188
PCBN - Inserts
TDAB
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .001
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
TDAB
TDAB 1.21.50 [ - S03 STLDR - 1.2
1.21.50.5 [ S04 STLDR - 1.2
1.21.51 [ S05 STLDR - 1.2
H03 STLDR - 1.2
H04 STLDR - 1.2
Tip sizes: H05 STLDR - 1.2
See Technical Guide
S0308 STLDR - 1.2
S0408 STLDR - 1.2
H0308 STLDR - 1.2
H0408 STLDR - 1.2
[ Stock standard
Subject to change refer to current price and stock-list
189
PCBN - Inserts
TNGA
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
32. 3/8 1/8 .150 1/32
33. 3/8 3/16 .150 1/64-3/64
43. 1/2 3/16 .203 1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
TNGA
TNGA 322S-L1 [ [ MTJNRS..3 ..-MTFNR/L 3
MTJNLS..3 ..-MTKNR/L 3
TNGA 331S-L0 [ MTGNR/L..3 ..-MTUNR/L 3
332S-L0 [ [ MTFNR/L..3
333S-L0 [ MTENNS..3
S = Chamfered and honed MTRNR/L..3
TNGA 331S-L1 [
Tip sizes: 332S-L1 [ [ [
See Technical Guide 333S-L1 [ [
[ Stock standard
Subject to change refer to current price and stock-list
190
PCBN - Inserts
TNGN-LF
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
33. 3/8 3/16 3/64-1/16
43. 1/2 3/16 3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
TNGN
TNGN 333S-LF [ MTGNR/L..3* ..-MTUNR/L 3*
334S-LF [ MTFNR/L..3* ..-MTFNR/L 3*
MTRNR/L..3* ..-MTKNR/L 3*
MTCNN..3*
TNGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
22. 1/4 1/8 1/64-3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Solid
191
PCBN - Inserts
TNGX
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.005
22 1/4 1/8 1/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
TNGX
TNGX 221E-WZ [ CTJNR/L..2 -
MTGNR/L..2*
TNGX 221S-WZ [ MTFNR/L..2*
E = Honed
S = Chamfered and honed
WZ = Wiper geometry
Solid
TNMN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ±.005
rε = ±.005
22. 1/4 1/8 1/64-3/64
33. 3/8 3/16 3/64-1/16
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
192
PCBN - Inserts
TPGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
22. 1/4 1/8 1/64-1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
TPGN
TPGN 221S-L0 [ CTGPR/L..2 -
222S-L0 [ CTFPR/L..2
CTRPR/L..2
CTWPR/L..2
Tip sizes:
See Technical Guide
TPGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε ± .004
22. 1/4 1/8 1/64-3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Solid
[ Stock standard
Subject to change refer to current price and stock-list
193
PCBN - Inserts
VBGW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε ± .004
33. 3/8 3/16 .150 1/64-1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
VBGW
VBGW 332E-L2 [ SVLBR/L..3 -
SVVBN..3
VBGW 331S-L2 [
332S-L2 [
E = Honed
S = Chamfered and honed
Tip sizes:
See Technical Guide
VNGA
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε ± .004
33. 3/8 3/16 .150 1/64-1/32
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
194
PCBN - Inserts
VNMN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
33. 3/8 3/16 3/64
Grades Toolholders
CBN100
CBN150
CBN300
CBN10
CBN20
Inserts Part No. External Internal
VNMN
VNMN 333S [ MVJNR/L..3 MVUNR/L 3
MVTNR/L..3 MVLNR/L 3
MVPNR/L 3
Solid
[ Stock standard
Subject to change refer to current price and stock-list
Optional parts for “M” style holders to accept solid inserts (without hole)
Anvil Long reach Optional
Insert Anvil Screw Clamp parts pack
Note!
The clamp screw should be flush with the top of the new clamp at the final clamping position,
with the insert in place.
195
PCD - Inserts
CCMT
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ± .005
rε = ± .004
32.5. 3/8 - 5/32 .177 1/32
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
CCMT
CCMT 32.52-L1 [ SCFCR/L..3 ..-SCLCR/L 3
SCGCR/L..3 ..-SCFCR/L 3
SCMCN..3
F = Sharp
Tip sizes:
See Technical Guide
CCMW
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ±.005
rε = ±.004
21.5. 1/4 3/32 .114 1/128-1/32
32.5. 3/8 5/32 .177 1/64
Grades Toolholders
PCD10
PCD20
PCD30
[ Stock standard
Subject to change refer to current price and stock-list
196
PCD - Inserts
CDCB
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ± .001
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
CDCB
CDCB 1.21.20 [ - S03 SCLDR/L - 1.2
1.21.20.5 [ S04 SCLDR/L - 1.2
1.21.21 [ H03 SCLDR - 1.2
CPGN
Tolerances: Dimensions in inch
Size I.C. l s rε
s = ± .005
rε = ± .004
42. 1/2 - 1/8 1/64-1/32
Grades Toolholders
PCD10
PCD20
PCD30
CPGN 421F-L2 [
422F-L2 [
F = Sharp
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
197
PCD - Inserts
CPGW
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ± .005
rε = ± .004
1.8 7/32 - 3/32 .098 1/64
21.5 1/4 3/32 .114 1/128-1/32
32.5 3/8 5/32 .177 1/128-1/32
43 1/2 3/16 .202 1/64-1/32
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
CPGW
CPGW 1.81.51F-L1 [ - -
CPGW 21.50.5F-L1 [ - -
21.51F-L1 [
21.52F-L1 [
F = Sharp
CPGW 32.50.5F-L1 [ - -
Tip sizes: 32.51F-L1 [
See Technical Guide 32.52F-L1 [
CPGW 431F-L1 [ - -
432F-L1 [
DCMW
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ±.005
rε = ±.004
21.5. 1/4 3/32 .114 1/128-1/64
32.5. 3/8 5/32 .177 1/128-1/64
Grades Toolholders
PCD10
PCD20
PCD30
F = Sharp
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
198
PCD - Inserts
DPGW
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ±. 005
rε = ± .004
21.5 1/4 - 3/32 .114 1/128-1/32
32.5 3/8 5/32 .177 1/128-1/32
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
DPGW
DPGW 21.50.5F-L1 [ - -
21.51F-L1 [
21.52F-L1 [
DPGW 32.50.5F-L1 [ - -
F = Sharp 32.51F-L1 [
32.52F-L1 [
Tip sizes:
See Technical Guide
RCGN
Tolerances: Dimensions in inch
Size I.C. s
s = ± .005
32 3/8 1/8
42 1/2 1/8
Grades Toolholders
PCD10
PCD20
PCD30
RCGN 42F-LF [ - -
F = Sharp
LF = Complete top layer
[ Stock standard
Subject to change refer to current price and stock-list
199
PCD - Inserts
RNGN
Tolerances: Dimensions in inch
Size I.C. s
s = ± .005
32 3/8 1/8
42 1/2 1/8
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
RNGN
RNGN 32F-LF [ CRGNR/L..3 ..-CRGNL 3
CRDNN..3
MRGNR/L..3*
SCMW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
21.5. 1/4 3/32 .114 1/128-1/64
32.5. 3/8 5/32 .177 1/128-1/64
Grades Toolholders
PCD10
PCD20
PCD30
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
200
PCD - Inserts
SPGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
32 3/8 1/8 1/64-1/32
42 1/2 1/8 1/64-1/32
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
SPGN
SPGN 321F-L1 [ CSRPR/L..3 -
322F-L1 [ CSSPR/L..3
CSDPN ..3
SPGN 322F-L2 [
SPGW
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ± .005
rε = ± .004
2.5 5/16 - 1/8 .114 1/128-1/32
32.5 3/8 5/32 .177 1/128-1/32
Grades Toolholders
PCD10
PCD20
PCD30
SPGW 32.50.5F-L1 [ - -
F = Sharp 32.51F-L1 [
32.52F-L1 [
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
201
PCD - Inserts
TCMW
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ± .005
rε = ± .004
1.8 7/32 3/32 .098 1/128-1/64
21.5 1/4 3/32 .114 1/128-1/32
32.5 3/8 7/32 .177 1/64
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
TCMW
TCMW 1.81.50.5F-L1 [ - -
1.81.51F-L1 [
TDAB
Tolerances: Dimensions in inch
Size I.C. l s h rε
s = ± .001
Grades Toolholders
PCD10
PCD20
PCD30
[ Stock standard
Subject to change refer to current price and stock-list
202
PCD - Inserts
TPGN
Tolerances: Dimensions in inch
Size I.C. s rε
s = ± .005
rε = ± .004
1.81.5. 7/32 3/32 1/64-1/32
22. 1/4 1/8 1/128-1/32
32. 3/8 1/8 1/128-3/64
43. 1/2 3/16 1/64-3/64
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
TPGN
TPGN 1.81.51F-L1 [ - -
1.81.52F-L1 [
TPGN 220.5F-L1 [ - -
221F-L1 [
F = Sharp 222F-L1 [
[ Stock standard
Subject to change refer to current price and stock-list
203
PCD - Inserts
TPGW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
1.81.5. 7/32 3/32 .098 1/128-1/32
21.5. 1/4 3/32 .114 1/128-1/32
32.5. 3/8 5/32 .177 1/64-1/32
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
TPGW
TPGW 1.81.50F-L1 [ - -
1.81.51F-L1 [
1.81.52F-L1 [
TPGW 21.50.5F-L1 [ - -
F = Sharp
21.51F-L1 [
21.52F-L1 [
Tip sizes:
See Technical Guide
TPGW 32.51F-L1 [ - -
32.52F-L1 [
[ Stock standard
Subject to change refer to current price and stock-list
204
PCD - Inserts
VBGW
Tolerances: Dimensions in inch
Size I.C. s h rε
s = ± .005
rε = ± .004
33. 3/8 3/16 .177 1/128-1/32
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. External Internal
VBGW
VBGW 330.5F-L2 [ SVLBR/L..3 -
331F-L2 [ SVBBN..3
332F-L2 [
F = Sharp
Tip sizes:
See Technical Guide
VPGX
Tolerances: Dimensions in inch
Size l s h rε
s = ± .005
rε = ± .004
22 (mm) 22 mm 1/4 (06) .220 .059 (1.5)
22 (mm) 22 mm 1/4 (06) .220 .118 (3.0)
Grades Toolholders
PCD10
PCD20
PCD30
F = Sharp
Tip sizes:
See Technical Guide
[ Stock standard
Subject to change refer to current price and stock-list
205
PCD - Inserts
XPC
Dimensions in inch
Size I.C. s B L
Grades Toolholders
PCD10
PCD20
PCD30
Inserts Part No. Tool Type
XPC
XPC 63AL [ ZPAX - ZNPOM Milling cutters
63AR [
[ Stock standard Please see Milling Navigator for additional milling inserts in grade PCD20
Subject to change refer to current price and stock-list
206
Application overview – MDT toolholders
External toolholders
CFIR/L CFMR/L CFIR/L CGIR/L CIIR/L
page 208-209 page 210-211 page 212-213 page 214 page 215
Internal toolholders
A...-CGGR/L
page 216
207
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN
CFIR/L
Dimensions in inch
Seat
Application Part No. h b l1 f1 l3 ar* size
3 CFIR 063 03B .625 .625 4.5 .875 1.12 .430 0.5 3 LC..1603..
075 03B .750 .750 4.5 1.00 1.14 .430 1.3 3 LC..1603..
100 03D 1.00 1.00 6 1.25 1.14 .430 1.7 3 LC..1603..
125 03D 1.25 1.25 6 1.50 1.61 .430 2.7 3 LC..1603..
CFIL 063 03B .630 .630 4.5 .875 1.12 .430 0.5 3 LC..1603..
075 03B .750 .750 4.5 1.00 1.14 .430 1.3 3 LC..1603..
100 03D 1.00 .750 6 1.25 1.14 .430 1.7 3 LC..1603..
125 03D 1.25 1.25 6 1.50 1.61 .430 2.7 3 LC..1603..
4 CFIR 075 04B .750 .750 4.5 1.00 1.22 .530 0.7 4 LC..1604..
100 04D 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
125 04D 1.25 1.25 6 1.50 1.61 .530 2.7 4 LC..1604..
CFIL 075 04B .750 .750 4.5 1.00 1.22 .530 0.7 4 LC..1604..
100 04D 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
125 04D 1.25 1.25 6 1.50 1.61 .530 2.7 4 LC..1604..
Toolholder/
Insert
dimension
208
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN
CFIR/L
Dimensions in inch
Seat
Application Part No. h b l1 f1 l3 ar* size
5 CFIR 075 05B .750 .750 4.5 1.00 1.42 .610 0.7 5 LC..1605..
100 05D 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
125 05D 1.25 1.25 6 1.50 1.61 .610 2.7 5 LC..1605..
CFIL 075 05B .750 .750 4.5 1.00 1.42 .610 0.7 5 LC..1605..
100 05D 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
125 05D 1.25 1.25. 6 1.25 1.61 .610 2.7 5 LC..1605..
6 CFIR 100 06D 1.00 1.00 6 1.25 1.61 .800 1.7 6 LC..1606..
125 06D 1.25 1.25 6 1.50 1.61 .800 2.7 6 LC..1606..
CFIL 100 06D 1.00 1.00 6 1.25 1.61 .800 1.7 6 LC..1606..
125 06D 1.25 1.25 6 1.50 1.61 .800 2.7 6 LC..1606..
8 CFIR 100 08D 1.00 1.00 6 1.25 1.98 1.00 1.7 8 LC..3008..
125 08E 1.25 1.25 6 1.50 1.98 1.00 2.7 8 LC..3008..
CFIL 100 08D 1.00 1.00 6 1.25 1.98 1.00 1.7 8 LC..3008..
125 08E 1.25 1.25 7 1.50 1.98 1.00 3.0 8 LC..3008..
*Max depth of cut for LCMF16.. = .550 in., LCMF30.. = 1.100 in.
Spare Parts, Parts included in delivery
Clamp screw/ Key Clamp screw/ Key
(old version) (new version)
Toolholder/
Insert
dimension
209
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN Long reach
CFMR/L
Dimensions in inch
Seat
Application Part No. h b l1 f1 l3 ar* size
3 CFMR 075 03B .750 .750 4.5 1.00 1.14 .680 0.7 3 LC..1603..
100 03D 1.00 1.00 6 1.25 1.44 .680 1.4 3 LC..1603..
125 03D 1.25 1.25 6 1.50 1.14 .680 2.2 3 LC..1603..
150 03E 1.50 1.50 7 2.00 1.62 .680 3.6 3 LC..1603..
CFML 075 03B .750 .750 4.5 1.00 1.14 .680 0.7 3 LC..1603..
100 03D 1.00 1.00 6 1.25 1.44 .680 1.4 3 LC..1603..
125 03D 1.25 1.25 6 1.50 1.14 .680 2.2 3 LC..1603..
150 03E 1.50 1.50 7 2.00 1.62 .680 3.6 3 LC..1603..
4 CFMR 075 04B .750 .750 4.5 1.00 1.22 .787 0.7 4 LC..1604..
100 04D 1.00 1.00 6 1.25 1.54 .787 1.4 4 LC..1604..
125 04D 1.25 1.25 6 1.50 1.22 .787 2.2 4 LC..1604..
150 04E 1.50 1.50 7 2.00 1.97 .787 3.6 4 LC..1604..
CFML 075 04B .750 .750 4.5 1.00 1.22 .787 0.7 4 LC..1604..
100 04D 1.00 1.00 6 1.25 1.54 .787 1.4 4 LC..1604..
125 04D 1.25 1.25 6 1.50 1.22 .787 2.2 4 LC..1604..
150 04E 1.50 1.50 7 2.00 1.97 .787 3.6 4 LC..1604..
Toolholder/
Insert
dimension
210
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN Long reach
CFMR/L
Dimensions in inch
Seat
Application Part No. h b l1 f1 l3 a r* size
5 CFMR 100 05D 1.00 1.00 6 1.25 1.70 .984 1.5 5 LC..1605..
125 05D 1.25 1.25 6 1.50 1.42 .984 2.2 5 LC..1605..
150 05E 1.50 1.50 7 2.00 2.25 .984 3.6 5 LC..1605..
CFML 100 05D 1.00 1.00 6 1.25 1.70 .984 1.5 5 LC..1605..
125 05D 1.25 1.25 6 1.50 1.42 .984 2.2 5 LC..1605..
150 05E 1.50 1.50 7 2.00 2.25 .984 3.6 5 LC..1605..
6 CFMR 100 06D 1.00 1.00 6 1.25 2.05 1.300 1.5 6 LC..1606..
125 06D 1.25 1.25 6 1.50 1.61 1.300 2.3 6 LC..1606..
150 06E 1.50 1.50 7 2.00 2.61 1.300 3.6 6 LC..1606..
CFML 100 06D 1.00 1.00 6 1.25 2.05 1.300 1.5 6 LC..1606..
125 06D 1.25 1.25 6 1.50 1.61 1.300 2.3 6 LC..1606..
150 06E 1.50 1.50 7 2.00 2.61 1.300 3.6 6 LC..1606..
8 CFMR 100 08D 1.00 1.00 6 1.25 1.98 1.620 1.5 8 LC..3008..
125 08E 1.25 1.25 7 1.50 1.98 1.620 2.3 8 LC..3008..
150 08E 1.50 1.50 7 2.00 3.28 1.620 3.6 8 LC..3008..
CFML 100 08D 1.00 1.00 6 1.125 1.98 1.620 1.5 8 LC..3008..
125 08E 1.25 1.25 7 1.50 1.98 1.620 2.3 8 LC..3008..
150 08E 1.50 1.50 7 2.00 3.28 1.620 3.6 8 LC..3008..
*Max depth of cut for LCMF16.. = .550 in., LCMF30.. = 1.100 in.
Spare Parts, Parts included in delivery
Clamp screw/ Key Clamp screw/ Key
(old version) (new version)
Toolholder/
Insert
dimension
211
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN
CFIR/L
Dimensions in inch
Initial Seat
Application plunge** Part No. h b l1 f1 l3 ar size
3 4.00/2.75 CFIR 100 03D-L4.00 2.75 1.00 1.00 6 1.25 1.10 .430 1.7 3 LC..1603..
5.00/3.50 100 03D-L5.00 3.50 1.00 1.00 6 1.25 1.10 .430 1.7 3 LC..1603..
6.70/4.30 100 03D-L6.70 4.30 1.00 1.00 6 1.25 1.10 .430 1.7 3 LC..1603..
4.00/2.75 CFIL 100 03D-R4.00 2.75 1.00 1.00 6 1.25 1.10 .430 1.7 3 LC..1603..
5.00/3.50 100 03D-R5.00 3.50 1.00 1.00 6 1.25 1.10 .430 1.7 3 LC..1603..
6.70/4.30 100 03D-R6.70 4.30 1.00 1.00 6 1.25 1.10 .430 1.7 3 LC..1603..
4 4.00/2.75 CFIR 100 04D-L4.00 2.75 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
5.00/3.50 100 04D-L5.00 3.50 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
9.00/5.50 100 04D-L9.00 5.50 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
4.00/2.75 CFIL 100 04D-R4.00 2.75 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
5.00/3.50 100 04D-R5.00 3.50 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
9.00/5.50 100 04D-R9.00 5.50 1.00 1.00 6 1.25 1.22 .530 1.7 4 LC..1604..
Toolholder/
Insert
dimension
212
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN
CFIR/L
Dimensions in inch
Initial Seat
Application plunge** Part No. h b l1 f1 l3 ar* size
5 4.00/2.75 CFIR 100 05D-L4.00 2.75 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
5.00/3.50 100 05D-L5.00 3.50 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
6.70/4.30 100 05D-L6.70 4.30 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
9.00/5.50 100 05D-L9.00 5.50 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
4.00/2.75 CFIL 100 05D-R4.00 2.75 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
5.00/3.50 100 05D-R5.00 3.50 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
6.70/4.30 100 05D-R6.70 4.30 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
9.00/5.50 100 05D-R9.00 5.50 1.00 1.00 6 1.25 1.42 .610 1.7 5 LC..1605..
6 4.00/2.75 CFIR 100 06D-L4.00 2.75 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
5.00/3.50 100 06D-L5.00 3.50 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
6.70/4.30 100 06D-L6.70 4.30 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
9.00/5.50 100 06D-L9.00 5.50 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
4.00/2.75 CFIL 100 06D-R4.00 2.75 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
5.00/3.50 100 06D-R5.00 3.50 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
6.70/4.30 100 06D-R6.70 4.30 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
9.00/5.50 100 06D-R9.00 5.50 1.00 1.00 6 1.25 1.57 .800 1.7 6 LC..1606..
Toolholder/
Insert
dimension
213
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN
CGIR/L
Dimensions in inch
Initial Seat
Application plunge** Part No. h b l1 f1 a r* size
3 4.00/2.75 CGIR 100 03D-R4.00 2.75 1.00 1.00 6.00 1.42 .430 1.5 3 LC..1603..
5.00/3.50 100 03D-R5.00 3.50 1.00 1.00 6.00 1.42 .430 1.5 3 LC..1603..
4.00/2.75 CGIL 100 03D-L4.00 2.75 1.00 1.00 6.00 1.42 .430 1.5 3 LC..1603..
5.00/3.50 100 03D-L5.00 3.50 1.00 1.00 6.00 1.42 .430 1.5 3 LC..1603..
4 4.00/2.75 CGIR 100 04D-R4.00 2.75 1.00 1.00 6.00 1.51 .530 1.5 4 LC..1604..
5.00/3.50 100 04D-R5.00 3.50 1.00 1.00 6.00 1.51 .530 1.5 4 LC..1604..
4.00/2.75 CGIL 100 04D-L4.00 2.75 1.00 1.00 6.00 1.51 .530 1.5 4 LC..1604..
5.00/3.50 100 04D-L5.00 3.50 1.00 1.00 6.00 1.51 .530 1.5 4 LC..1604..
6 5.00/3.50 CGIR 100 06D-R5.00 3.50 1.00 1.00 6.00 1.79 .800 1.5 6 LC..1606..
6.70/4.30 100 06D-R6.70 4.30 1.00 1.00 6.00 1.79 .800 1.5 6 LC..1606..
9.00/5.50 100 06D-R9.00 5.50 1.00 1.00 6.00 1.79 .800 1.5 6 LC..1606..
5.00/3.50 CGIL 100 06D-L5.00 3.50 1.00 1.00 6.00 1.79 .800 1.5 6 LC..1606..
6.70/4.30 100 06D-L6.70 4.30 1.00 1.00 6.00 1.79 .800 1.5 6 LC..1606..
9.00/5.50 100 06D-L9.00 5.50 1.00 1.00 6.00 1.79 .800 1.5 6 LC..1606..
Toolholder/
Insert
dimension
214
MDT - Toolholders, external
Toolholders for inserts LCMF, LCMR and LCGN
CIIR/L
Dimensions in inch
Seat
Application Part No. h b l1 f1 ar* size
Toolholder/
Insert
dimension
215
MDT - Toolholders, internal
Toolholders for inserts LCGN, LCMF and LCMR
CGGR/L
Dimensions in inch
∅ Seat
Application Part No. d l1 l3 f1 ar min size
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
216
MDT
217
MDT - Holder and blades
Toolholder and blades for inserts LCGN, LCMF and LCMR
SFN
Dimensions in inch
Seat
Application Part No. b h l1 f1 ar* size
Toolholder/
Insert
dimension
218
MDT - Blades for holder 150.10
Blades for inserts LCGN, LCMF and LCMR
Dimensions in inch
Seat
Application Part No. b2 l h1 h3 Dmax* size
Note: For application information, see your local SECO-Carboloy technical specialist. *Dmax for LCMF16.. = 1.102 in.
219
MDT - Inserts
LCMF and LCMR
Tolerances: Dimensions in inch
Size b1 (mm) l s rε
b1 = ± .002
l = ± .003
s = ± .0015 mm-version
1603 .118 (3) .630 .177 .008-.016
l = Distance cutting edge-rear 1604 .157 (4) .630 .177 .008-.031
support 1605 .197 (5) .630 .177 .016-.031
1606 .236 (6) .630 .177 .016-.039
3008 .315 (8) 1.150 .219 .016-.047
inch-version
1603 .125 .630 .177 .008
1605 .187 .630 .177 .020
1606 .250 .630 .177 .020
Grades
Coated Uncoated
TP200
TP300
CP50
TP40
883
890
Inserts Part No.
LCMF-FT
LCMF 160302-0300-FT [ [
160304-0300-FT [ [
LCMF 160404-0400-FT [ [
160408-0400-FT [ [
LCMF 160504-0500-FT [ [
160508-0500-FT [ [
LCMF 160604-0600-FT [ [
160608-0600-FT [ [ [
160610-0600-FT [ [
LCMF 300804-0800-FT [
300808-0800-FT [ [
300812-0800-FT [
inch-version
LCMF 160302-A125-FT [
160505-A187-FT [
160605-A250-FT [ [
LCMF-MT
LCMF 160302-0300-MT [ [ [
160304-0300-MT [ [
LCMF 160404-0400-MT [ [ [
160408-0400-MT [ [
LCMF 160504-0500-MT [ [
160508-0500-MT [ [
LCMF 160604-0600-MT [ [
160608-0600-MT [ [
160610-0600-MT [ [
inch-version
160302-A125-MT [
160505-A187-MT [
160605-A250-MT [ [
[ Stock standard
Subject to change refer to current price and stock-list
220
MDT - Inserts
LCMF and LCMR
Grades
Coated Uncoated
TP200
TP300
CP50
TP40
883
890
Inserts Part No.
LCMF-MG
LCMF 160304-0300-MG [ [
LCMF 160404-0400-MG [ [
LCMF 160504-0500-MG [ [
LCMF 160608-0600-MG [ [
LCMR-FT
LCMR 160304-0300-FT [ [
LCMR 160404-0400-FT [ [
LCMR 160504-0500-FT [ [
LCMR 160608-0600-FT [ [
LCMR 300808-0800-FT [ [ [
300812-0800-FT [
LCMR-MT
LCMR 160304-0300-MT [ [ [
LCMR 160404-0400-MT [ [
160408-0400-MT [
LCMR 160504-0500-MT [ [
160508-0500-MT [
LCMR 160608-0600-MT [ [ [
160610-0600-MT [
[ Stock standard
Subject to change refer to current price and stock-list
221
MDT - Inserts
LCMF and LCMR
Tolerances: Dimensions in inch
Size b1 (mm) l s rε
b1 = ± .002
l = ± .003
s = ± .0015 mm-version
1603M0 .118 (3) .674 .177 .059
l = Distance cutting edge-rear 1604M0 .157 (4) .679 .177 .079
support 1605M0 .197 (5) .699 .177 .098
1606M0 .236 (6) .714 .177 .118
3008M0 .315 (8) 1.183 .216 .157
inch-version
160300 .125 .683 .177 .063
160500 .187 .722 .177 .094
160600 .250 .719 .177 .125
Grades
Coated Uncoated
TP200
TP300
CP50
TP40
883
890
Inserts Part No.
LCMF-MP
LCMF 1603M0-0300-MP [ [
1604M0-0400-MP [ [
1605M0-0500-MP [ [
1606M0-0600-MP [ [ [
3008M0-0800-MP [ [
inch-version
160300-A125-MP [ [
160500-A187-MP [
160600-A250-MP [ [
LCMR-MP
LCMR 1603M0-0300-MP [ [ [
1604M0-0400-MP [ [ [
1605M0-0500-MP [ [ [
1606M0-0600-MP [ [ [
3008M0-0800-MP [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
222
MDT - Inserts
LCMF and LCMR
Tolerances: Dimensions in inch
Size b1 (mm) l s rε
b1 = ± .002
l = ± .003
s = ± .0015 1603 .118 (3) .630 .177 .008-.016
1604 .157 (4) .630 .177 .008-.016
l = Distance cutting edge-rear
support
Grades
Coated
CP600
TP400
Inserts Part No. Lead Angle (κ)
LCMF-MC
LCMF 160302-0300-MC - [ [
160304-0300-MC - [
160302-0300-MCR6 6 [
160302-0300-MCL6 6 [
160302-0300-MCR15 15 [
160302-0300-MCL15 15 [
LCMF 160402-0400-MC - [
160402-0400-MCR6 6 [
160402-0400-MCL6 6 [
160402-0400-MCR15 15 [
160402-0400-MCL15 15 [
LCMR-MC
LCMR 160302-0300-MC - [ [
160404-0400-MC - [ [
[ Stock standard
Subject to change refer to current price and stock-list
223
MDT - Inserts
LCGN - Radial grooves
Dimensions in inch
Size b1 rε ar l
Grades
Coated
CP50
Inserts Standard For lock-ring Part No.
LCGN-FG
DIN 471 1.0 mm LCGN 160300-0115-FG* [
DIN 472 1.2 mm 160300-0135-FG* [
SMS 1581 1.5 mm 160301-0165-FG* [
SMS 1582 1.75 mm 160301-0190-FG* [
2.0 mm 160301-0215-FG* [
2.5 mm 160302-0265-FG [
- 160302-0300-FG [
3.0 mm 160302-0320-FG [
- 160302-0340-FG [
- 160402-0400-FG [
4.0 mm 160402-0420-FG [
- 160402-0440-FG [
- 160502-0500-FG [
5.0 mm 160502-0520-FG [
- 160602-0600-FG [
- 160602-0635-FG [
224
MDT - Inserts
LCGN - O-ring
Dimensions in inch
Size t b1 rε ar r l
Grades
Coated
CP50
For O-ring For O-ring
Inserts Standard mm inch Part No.
LCGN-DY
SMS 1588 2.4 .094 LCGN 160405-0240-DY [
BS 4518 3.0 .118 160410-0300-DY [
LCGN-ST
SMS 1588 1.6 .063 LCGN 160305-0160-ST [
BS 4518 2.4 .094 160305-0240-ST [
3.0 .118 160410-0300-ST [
O-ring, static
[ Stock standard
Subject to change refer to current price and stock-list
225
MDT - Inserts
LCGN - Full radius grooving
Dimensions in inch
Size rε ar l
Grades
Coated
CP50
Inserts For radius inch (mm) Part No.
LCGN-R
.039 (1.0 mm) LCGN 1603M0-0100R-R* [
.039 (1.0mm) 1603M0-0100L-R* [
.047 (1.2 mm) 1603M0-0120R-R* [
.047 (1.2mm) 1603M0-0120L-R* [
.059 (1.5 mm) 1603M0-0150-R [
.079 (2.0 mm) 1604M0-0200-R [
.118 (3.0 mm) 1606M0-0300-R [
LCGN - DIN 76
Right-hand version shown Dimensions in inch
Size t rε l
Grades
Coated
CP50
226
MDT - Inserts
227
Application overview – Threading toolholders
External toolholders
CER/L...Q CER...CQ CER/L...Q
Internal toolholders
SNR/L CNR/L CNR/L
SNR...A CNR...API
228
Application overview – Threading inserts
Partial-profile insert
UN ISO metric
Reusable threaded
joints
UNJ MJ
Permanent threaded
joints for pipe mount-
ings and couplings
page 242-243 page 244 page 250-251 page 253 page 254
Motion-transmitting
threads
229
Threading - Inserts
Partial Profile 60° - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
26 1.024 5/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
230
Threading - Inserts
Partial Profile 60° - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
09 .378 7/32
11 .433 1/4
16 .650 3/8
22 .866 1/2
26 1.024 5/8
Toolholders, please see pages 264-268
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
231
Threading - Inserts
Partial Profile 55° - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
232
Threading - Inserts
Partial Profile 55° - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
09 .378 7/32
11 .433 1/4
16 .650 3/8
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
233
Threading - Inserts
UN - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
27 1.08 5/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
234
Threading - Inserts
UN - External Threading Snap Tap
Pitch Dimensions in inch Grades Grades
Coated Uncoated Coated Uncoated
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
235
Threading - Inserts
UN - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
09 .378 7/32
11 .433 1/4
16 .650 3/8
22 .866 1/2
27 1.08 5/8
Toolholders, please see pages ANSI B1.1 - 1983
264-267 3B
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
236
Threading - Inserts
UN - Internal Threading Snap Tap
Pitch Dimensions in inch Grades Grades
Coated Uncoated Coated Uncoated
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
237
Threading - Inserts
UNJ - External Threading ( for internal see note**) Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
238
Threading - Inserts
ISO Metric - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
27 1.08 5/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
239
Threading - Inserts
ISO Metric - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
09 .378 7/32
11 .433 1/4
16 .650 3/8
22 .866 1/2
27 1.08 5/8
Toolholders, please see pages ISO965/1 - 1980
264-267 4H
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
240
Threading - Inserts
ISO Metric - Internal Threading Snap Tap
Pitch Dimensions in inch Grades Grades
Coated Uncoated Coated Uncoated
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
241
Threading - Inserts
NPT - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
27 1.08 5/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
242
Threading - Inserts
NPT - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
09 .378 7/32
11 .433 1/4
16 .650 3/8
22 .866 1/2
27 1.08 5/8
Toolholders, please see pages ANSI B1.20.1 - 1983
264-267
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
243
Threading - Inserts
NPTF - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
11 .433 1/4
16 .650 3/8
CP200
CP300
S25M
S25M
CP50
CP50
H15
[ Stock standard
Subject to change refer to current price and stock-list
244
Threading
245
Threading - Inserts
ACME - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
20 .787 1/2
22 .866 1/2
26 1.024 5/8
27 1.024 5/8
Toolholders, please see pages ANSI B1.5-1988
260-263 3G
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
246
Threading - Inserts
ACME - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
20 .787 1/2
22 .866 1/2
26 1.024 5/8
27 1.024 5/8
Toolholders, please see pages ANSI B1.5-1988
264-268 3G
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
247
Threading - Inserts
Stub-ACME - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
20 .787 1/2
22 .866 1/2
26 1.024 5/8
27 1.024 5/8
Toolholders, please see pages ANSI B1.8-1988
260-263 2G
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
16 .650 3/8
22 .866 1/2
27 1.024 5/8
CP200
CP300
S25M
S25M
CP50
CP50
H15
[ Stock standard
Subject to change refer to current price and stock-list
248
Threading - Inserts
249
Threading - Inserts
Whitworth, BSW - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
250
Threading - Inserts
Whitworth, BSW - Internal Threading Snap Tap
Dimensions in inch
Size l I.C.
09 .376 7/32
11 .433 1/4
16 .650 3/8
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
11NR 19W-A1 [ [
14 - .035 .031 - - 14W-A1 [ [
251
Threading - Inserts
TR-DIN 103 - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
20 .787 1/2
22 .866 1/2
26 1.024 5/8
27 1.063 5/8
Toolholders, please see pages 260-263 DIN103-1977
ISO2901/3-1977 7H/7e
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
16 .650 3/8
20 .787 1/2
22 .866 1/2
26 1.024 5/8
27 1.080 5/8
Toolholders, please see pages 264-268 DIN103-1977
ISO2901/3-1977 7e/7H
CP200
CP300
S25M
S25M
CP50
CP50
H15
[ Stock standard
Subject to change refer to current price and stock-list
252
Threading - Inserts
Round-DIN405 - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
16 .650 3/8
22 .866 1/2
CP200
CP300
S25M
S25M
CP50
CP50
H15
[ Stock standard
Subject to change refer to current price and stock-list
253
Threading - Inserts
BSPT - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
16 .650 3/8
CP200
CP300
S25M
S25M
CP50
CP50
H15
254
Threading - Inserts
MJ - External Threading ( for internal see note**) Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
255
Threading - Inserts
API - External Threading Snap Tap
Dimensions in inch
Size l I.C.
22 .866 1/2
27 1.08 5/8
CP200
CP300
S25M
CP50
Pitch API Taper Insert Part No.
H15
Inserts TPI t l3 code Tpf rε Fc Right-hand
22 .866 1/2
27 1.08 5/8
S25M
CP50
[ Stock standard
Subject to change refer to current price and stock-list
256
Threading - Inserts
API RD - External Threading Snap Tap
Dimensions in inch
Size l I.C.
16 .650 3/8
22 .866 1/2
27 1.08 5/8
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
16 .650 3/8
22 .866 1/2
27 1.08 5/8
CP200
CP300
S25M
S25M
CP50
CP50
H15
257
Threading - Inserts
VAM-API BUTTRESS 2.5 - External Threading Snap Tap
Dimensions in inch
Size l I.C.
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
22 .866 1/2
CP200
CP300
S25M
S25M
CP50
CP50
H15
[ Stock standard
Subject to change refer to current price and stock-list
258
Threading - Inserts
API-BUTTRESS 2.6 - External Threading Snap Tap
Dimensions in inch
Size l I.C.
22 .866 1/2
CP200
CP300
CP200
CP300
S25M
S25M
CP50
CP50
Insert Part No. Insert Part No.
H15
H15
Inserts TPI mm t l3 rε B Right-hand Left-hand
22 .866 1/2
CP200
CP300
S25M
S25M
CP50
CP50
H15
[ Stock standard
Subject to change refer to current price and stock-list
259
Threading - Toolholders, external
Toolholders for S-inserts Snap Tap
CER/L...Q CER/L...Q
Dimensions in inch
Insert
Application I.C. Part No. h b l1 f1 l3
3/8 CER 0375 3-16Q .375 .375 3 .375 .900 .17 16ER
050 4-16Q .500 .500 4 .625 .900 .22 16ER
0625 4-16Q .625 .625 4 .750 .900 .44 16ER
075 5-16Q .750 .750 5 1.000 .900 .66 16ER
100 5-16Q 1.00 1.00 5 1.250 .900 1.32 16ER
100 6-16Q 1.00 1.00 6 1.250 .900 1.34 16ER
125 6-16Q 1.25 1.25 6 1.500 .900 2.20 16ER
150 6-16Q 1.50 1.50 6 1.750 .900 5.28 16ER
CEL 0375 3-16Q .375 .375 3 .375 .900 .17 16EL
050 4-16Q .500 .500 4 .625 .900 .22 16EL
0625 4-16Q .625 .625 4 .750 .900 .44 16EL
075 5-16Q .750 .750 5 1.000 .900 .66 16EL
100 5-16Q 1.00 1.00 5 1.250 .900 1.32 16EL
100 6-16Q 1.00 1.00 6 1.250 .900 1.34 16EL
125 6-16Q 1.25 1.25 6 1.500 .900 2.20 16EL
150 6-16Q 1.50 1.50 6 1.750 .900 5.28 16EL
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
260
Threading - Toolholders, external
Toolholders for S- inserts Snap Tap
CER/L...Q
Dimensions in inch
Insert
Application I.C. Part No. h b l1 f1 l3
1/2 CER 100 5-22Q 1.00 1.00 5 1.250 1.100 1.32 22ER
100 6-22Q 1.00 1.00 6 1.250 1.100 1.34 22ER
125 6-22Q 1.25 1.25 6 1.500 1.100 2.20 22ER
150 6-22Q 1.25 1.50 6 1.750 1.100 5.28 22ER
CEL 100 5-22Q 1.00 1.00 5 1.250 1.000 1.32 22EL
100 6-22Q 1.00 1.00 6 1.250 1.100 1.34 22EL
125 6-22Q 1.25 1.25 6 1.500 1.100 2.20 22EL
150 6-22Q 1.50 1.50 6 1.750 1.100 5.28 22EL
5/8 CER 100 6-27Q 1.00 1.00 6 1.250 1.300 1.34 27ER
125 6-27Q 1.25 1.25 6 1.500 1.300 2.20 27ER
150 6-27Q 1.50 1.50 6 1.750 1.300 5.28 27ER
CEL 100 6-27Q 1.00 1.00 6 1.250 1.300 1.34 27EL
125 6-27Q 1.25 1.25 6 1.500 1.300 2.20 27EL
150 6-27Q 1.50 1.50 6 1.750 1.300 5.28 27EL
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
261
Threading - Toolholders, external
Toolholders for S- inserts Snap Tap
CER/L...CQ
Dimensions in inch
Insert
Application I.C. Part No. h b l1 h1 f1 l3
3/8 CER 100 6-16CQ 1.00 1.00 6 1.5 1.250 .900 1.54 16ER
125 6-16CQ 1.25 1.25 6 1.5 1.500 .900 2.86 16ER
CEL 100 6-16CQ 1.00 1.00 6 1.5 1.250 .900 1.54 16EL
125 6-16CQ 1.25 1.25 6 1.5 1.500 .900 2.86 16EL
1/2 CER 100 6-22CQ 1.00 1.00 6 1.5 1.250 1.100 1.54 22ER
125 6-22CQ 1.25 1.25 6 1.5 1.500 1.100 2.86 22ER
CEL 100 6-22CQ 1.00 1.00 6 1.5 1.250 1.100 1.54 22EL
125 6-22CQ 1.25 1.25 6 1.5 1.500 1.100 2.86 22EL
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
262
Threading - Toolholders, external
Toolholders for K-inserts Snap Tap
CER/L...Q
Dimensions in inch
Insert
Application I.C. Part No. h b l1 f1 l3
1/2 CER 100 6-20Q 1.00 1.00 6 1.250 1.300 1.54 20..
125 6-20Q 1.25 1.25 6 1.500 1.300 2.86 20..
CEL 100 6-20Q 1.00 1.00 6 1.250 1.300 1.54 20..
125 6-20Q 1.25 1.25 6 1.500 1.300 2.80 20..
5/8 CER 100 6-26Q 1.00 1.00 6 1.250 1.800 1.54 26..
125 6-26Q 1.25 1.25 6 1.500 1.800 2.86 26..
150 6-26Q 1.50 1.50 6 1.750 1.800 5.28 26..
CEL 100 6-26Q 1.00 1.00 6 1.250 1.800 1.54 26..
125 6-26Q 1.25 1.25 6 1.500 1.800 2.86 26..
150 6-26Q 1.50 1.50 6 1.750 1.800 5.28 26..
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
263
Threading - Toolholders, internal
Toolholders for S- inserts Snap Tap
SNR...09A SNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
7/32 SNR 000750 55-09A .40 .40 .750 5.5 .750 .200 .25 09NR
1/4 SNR 000375 40-11 .50 .45 .375 4 - .285 .22 11NR
00050 55-11 .60 .50 .500 5.5 1.25 .315 .25 11NR
SNL 000375 40-11 .50 .45 .375 4 - .285 .22 11NL
00050 55-11 .60 .50 .500 5.5 1.25 .315 .25 11NL
3/8 SNR 000625 60-16 .75 .62 .625 6 1.50 .406 .44 16NR
SNL 000625 60-16 .75 .62 .625 6 1.50 .406 .44 16NL
1/2 SNR 00075 70-22 .90 .85 .750 7 2.00 .492 .66 22NR
SNL 00075 70-22 .90 .85 .750 7 2.00 .492 .66 22NL
3/8 SNR 000625 80-16-H .75 .62 .625 8 1.50 .406 .80 16NR
1/2 SNR 000750 10-22-H .90 .85 .750 10 2.00 .492 1.32 22NR
*Holder can be modified to accommodate smaller bore sizes. See page 117 in Technical Guide.
Spare Parts, Parts included in delivery
Locking screw/ Key Coolant
adaptor*
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
264
Threading - Toolholders, internal
Toolholders for S- inserts Snap Tap
CNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
3/8 CNR 00075 7-16 .95 .80 .750 7 - .520 .66 16NR
00100 8-16 1.15 1.0 1.000 8 - .650 1.54 16NR
00125 10-16 1.4 1.2 1.250 10 - .780 3.00 16NR
00150 12-16 1.7 1.5 1.500 12 - .900 5.94 16NR
00175 14-16 2.0 1.8 1.750 14 - 1.03 7.88 16NR
00200 14-16 2.2 2.0 2.000 14 - 1.15 10.78 16NR
CNL 00075 7-16 .95 .80 .750 7 - .520 .66 16NR
00100 8-16 1.15 1.0 1.000 8 - .650 1.54 16NL
00125 10-16 1.4 1.2 1.250 10 - .780 3.00 16NL
00150 12-16 1.7 1.5 1.500 12 - .900 5.94 16NL
00175 14-16 2.0 1.8 1.750 14 - 1.03 7.88 16NL
00200 14-16 2.2 2.0 2.000 14 - 1.15 10.78 16NL
*Holder can be modified to accommodate smaller bore sizes. See page 117 in Technical Guide.
Spare Parts, Parts included in delivery
Anvil for insert Anvil screw/ Key* Clamp + Screw/ Key
type S
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
265
Threading - Toolholders, internal
Toolholders for S- inserts Snap Tap
CNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
1/2 CNR 00100 8-22 1.20 1.10 1.000 8 - .710 1.54 22NR
00125 10-22 1.50 1.20 1.250 10 - .840 3.08 22NR
00150 12-22 1.80 1.50 1.500 12 - .970 5.94 22NR
00175 14-22 2.10 1.80 1.750 14 - 1.09 7.88 22NR
00200 14-22 2.30 2.00 2.000 14 - 1.21 10.78 22NR
00250 16-22 2.80 2.50 2.500 16 - 1.46 19.58 22NR
CNL 00100 8-22 1.20 1.10 1.000 8 - .710 1.54 22NL
00125 10-22 1.50 1.20 1.250 10 - .840 3.08 22NL
00150 12-22 1.80 1.50 1.500 12 - .970 5.94 22NL
00175 14-22 2.10 1.80 1.750 14 - 1.09 7.88 22NL
00200 14-22 2.30 2.00 2.000 14 - 1.21 10.78 22NL
00250 16-22 2.80 2.50 2.500 16 - 1.46 19.58 22NL
5/8 CNR 00150 12-27 1.90 1.50 1.500 12 - 1.02 5.94 27NR
00175 14-27 2.20 1.80 1.750 14 - 1.15 7.88 27NR
00250 16-27 2.90 2.50 2.500 16 - 1.52 19.58 27NR
CNL 00150 12-27 1.90 1.50 1.500 12 - 1.02 5.94 27NL
00175 14-27 2.20 1.80 1.750 14 - 1.15 7.88 27NL
00250 16-27 2.90 2.50 2.500 16 - 1.52 19.58 27NL
*Holder can be modified to accommodate smaller bore sizes. See page 117 in Technical Guide.
Spare Parts, Parts included in delivery
Anvil for insert Anvil screw/ Key* Clamp + Screw/ Key
type S
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
266
Threading - Toolholders, internal
Toolholders for API S-inserts Snap Tap
CNR...API
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod. d l1 l3 f1
1/2 CNR 00200 T22API 1.60 - 2.000 12 5.00 .880 10.78 22NR
00250 T22API 1.60 - 2.500 12 5.00 .880 10.78 22NR
CNL 00200 T22API 1.60 - 2.000 12 5.00 .880 10.78 22NL
00250 T22API 1.60 - 2.500 12 5.00 .880 10.78 22NL
5/8 CNR 00200 T27API 1.60 - 2.000 12 5.00 .900 19.58 27NR
00250 T27API 1.60 - 2.500 12 5.00 .900 19.58 27NR
CNL 00200 T27API 1.60 - 2.000 12 5.00 .900 19.58 27NL
00250 T27API 1.60 - 2.500 12 5.00 .900 19.58 27NL
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
267
Threading - Toolholders, internal
Toolholders for K-inserts Snap Tap
CNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
1/2 CNR 00100 8-20 1.40 1.40 1.000 8 - .810 2.20 20..
00125 10-20 1.70 1.40 1.250 10 - .940 3.08 20..
00150 12-20 2.00 1.60 1.500 12 - 1.06 5.50 20..
CNL 00100 8-20 1.40 1.40 1.000 8 - .810 2.20 20..
00125 10-20 1.70 1.40 1.250 10 - .940 3.08 20..
00150 12-20 2.00 1.60 1.500 12 - 1.06 5.05 20..
5/8 CNR 00125 10-26 2.00 1.60 1.250 10 - 1.06 3.08 26..
00150 12-26 2.10 1.60 1.500 12 - 1.18 5.50 26..
00175 14-26 2.30 1.80 1.750 14 - 1.31 8.74 26..
00200 14-26 2.50 2.00 2.000 14 - 1.43 10.78 26..
00250 16-26 3.00 2.50 2.500 16 - 1.68 19.58 26..
CNL 00125 10-26 2.00 1.60 1.250 10 - 1.06 3.08 26..
00150 12-26 2.10 1.60 1.500 12 - 1.18 5.50 26..
00175 14-26 2.30 1.80 1.750 14 - 1.31 8.74 26..
00250 16-26 3.00 2.50 2.500 16 - 1.68 19.58 26..
*Holder can be modified to accommodate smaller bore sizes. See page 117 in Technical Guide.
Spare Parts, Parts included in delivery
Anvil for insert Anvil screw/ Key* Clamp + Screw Key
type K
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
268
Application overview – Grooving and Cut-off
Grooving – Shallow Grooves
Radial external Radial internal Axial
Profiles: Circlip groove . . . . . . . . 270 Profiles: Circlip groove . . . . . . . . .270 Profiles: Circlip groove . . . . . . . . 271
DIN 76. . . . . . . . . . . . . . 272 DIN 76 . . . . . . . . . . . . . .272 O-ring . . . . . . . . . . . . . . 275
Radiused groove . . . . . . 273 Radiused groove . . . . . .273
O-ring, static . . . . . . . . . 274 O-ring, static . . . . . . . . .274 Toolholders . . . . . . . . . . . . . . . . . . . 280
O-ring, dynamic. . . . . . . 276 O-ring, dynamic . . . . . . .276
Cut-off
Toolholders . . . . . . . . . . . . . . . 286-287
269
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, Radial Grooves Snap Tap
Dimensions in inch
Size l (mm) d / I.C.
Grades Grades
Coated Uncoated Coated Uncoated
Part No. Part No.
S25M
S25M
CP30
CP30
For lock- For flat- b1 External Right-hand Internal Right-hand
HX
HX
Inserts ring thread (in.) Internal Left-hand External Left-hand
270
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, Axial Grooves Snap Tap
Tolerance: Dimensions in inch
Size l (mm) d / I.C. b1
b1 = +.002 / -.000
Grades Grades
Coated Uncoated Coated Uncoated
S25M
S25M
CP30
CP30
For width dmin Part No. Part No.
Inserts in. in. External Right-hand External Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
271
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, DIN 76 Snap Tap
Tolerance: Dimensions in inch
Size l (mm) d / I.C. t rε
rε = ±.001
Grades Grades
Coated Uncoated Coated Uncoated
Part No. Part No.
S25M
S25M
CP30
CP30
External Right-hand Internal Right-hand
Inserts For Max. TPI Internal Left-hand External Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
272
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, Radius Snap Tap
Tolerance: Dimensions in inch
Size l (mm) d / I.C. rε
rε = ±.001
Grades Grades
Coated Uncoated Coated Uncoated
Part No. Part No.
S25M
S25M
CP30
CP30
External Right-hand Internal Right-hand
Inserts For radius inch Internal Left-hand External Left-hand
[ Stock standard
Subject to change refer to current price and stock-list
273
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, O-ring Static Snap Tap
Tolerances: Dimensions in inch
Size l (mm) d / I.C. t b1 rε ar r
b1 = +.002 / -.000
rε = ±.001
ar = ±.001 14..1.6 .551 (14) 3/8 .079 .094 .020 .047 .008
r = ±.001 14..2.4 .551 (14) 3/8 .079 .126 .020 .075 .010
20..3.0 .787 (20) 1/2 .126 .150 .039 .094 .012
Toolholder range, 20..3.55 .787 (20) 1/2 .126 .189 .029 .110 .012
please see page 20..4.1 .787 (20) 1/2 .126 .201 .039 .134 .016
278-279, 282-283 26..5.7 1.023 (26) 5/8 .197 .256 .039 .189 .016
26..8.4 1.023 (26) 5/8 .205 .358 .039 .291 .022
S25M
S25M
CP30
CP30
External Right-hand Internal Right-hand
Inserts mm inch Internal Left-hand External Left-hand
ISO 3601
DIN 3771
BS1806
[ Stock standard
Subject to change refer to current price and stock-list
274
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, O-ring Axial Snap Tap
Tolerances: Dimensions in inch
Size l (mm) d / I.C. t b1 rε aa r
b1 = +.002 / -.000
rε = ±.001
ar = ±.001 14...2.4 .551 (14) 3/8 .079 .134 .020 .067 .008
r = ±.001 14...2.65 .551 (14) 3/8 .083 .142 .020 .087 .008
20...3.0 .787 (20) 1/2 .126 .165 .039 .087 .010
Toolholder range, 20...3.55 .787 (20) 1/2 .126 .193 .029 .116 .012
please see page 280
S25M
S25M
CP30
CP30
Part No. Part No.
Inserts mm inch External Right-hand External Left-hand
SMS 1588
ISO 3601
DIN 3771
BS1806
[ Stock standard
Subject to change refer to current price and stock-list
275
Grooving and Cut-off - Inserts
Inserts - Shallow Grooves, O-ring Dynamic Snap Tap
Tolerances: Dimensions in inch
Size l (mm) d / I.C. t b1 rε ar r
b1 = +.002 / -.000
rε = ±.001
ar = ±.001 14..1.8 .551 (14) 3/8 .079 .094 .020 .061 .008
r = ±.001 14..2.4 .551 (14) 3/8 .079 .130 .020 .079 .010
14..2.65 .551 (14) 3/8 .083 .142 .020 .090 .012
Toolholder range, 20..3.0 .787 (20) 1/2 .126 .161 .039 .098 .010
please see pages 20..3.55 .787 (20) 1/2 .126 .189 .029 .124 .012
278-279, 282-283 26..5.3 1.023 (26) 5/8 .197 .283 .029 .185 .016
26..5.7 1.023 (26) 5/8 .197 .299 .039 .197 .016
S25M
S25M
CP30
CP30
External Right-hand Internal Right-hand
Inserts mm inch Internal Left-hand External Left-hand
SMS 1588
[ Stock standard
Subject to change refer to current price and stock-list
276
Grooving and Cut-off
277
Grooving and Cut-off - Toolholders, external
Toolholders for Shallow Grooves Snap Tap
CER/L...Q
Dimensions in inch
Insert
Application I.C. Part No. h b l1 f1 l3
1/4 CER 0375 3-10Q .375 .375 3 .625 .900 0.3 10..
050 4-10Q .500 .500 4 .625 .900 0.4 10..
0625 4-10Q .625 .625 4 .750 .900 0.9 10..
075 5-10Q .750 .750 5 1.00 .900 1.0 10..
100 6-10Q 1.00 1.25 6 1.25 .900 1.6 10..
125 6-10Q 1.25 1.25 6 1.50 .900 2.8 10..
CEL 0375 3-10Q .375 .375 3 .625 .900 0.3 10..
050 4-10Q .500 .500 4 .625 .900 0.4 10..
0625 4-10Q .625 .625 4 .750 .900 0.9 10..
075 5-10Q .750 .750 5 1.00 .900 1.0 10..
100 6-10Q 1.00 1.00 6 1.25 .900 1.6 10..
125 6-10Q 1.25 1.25 6 1.50 .900 2.8 10..
3/8 CER 100 6-14Q 1.00 1.00 6 1.25 1.100 1.6 14..
125 6-14Q 1.25 1.25 6 1.50 1.100 2.8 14..
CEL 100 6-14Q 1.00 1.00 6 1.25 1.100 1.6 14..
125 6-14Q 1.25 1.25 6 1.50 1.100 2.8 14..
Toolholder/
Insert
dimension
278
Grooving and Cut-off - Toolholders, external
Toolholders for Shallow Grooves Snap Tap
CER/L...Q
Dimensions in inch
Insert
Application I.C. Part No. h b l1 f1 l3
1/2 CER 100 6-20Q 1.00 1.00 6 1.250 1.300 1.54 20..
125 6-20Q 1.25 1.25 6 1.500 1.300 2.86 20..
CEL 100 6-20Q 1.00 1.00 6 1.250 1.300 1.54 20..
125 6-20Q 1.25 1.25 6 1.500 1.300 2.80 20..
5/8 CER 100 6-26Q 1.00 1.00 6 1.250 1.800 1.54 26..
125 6-26Q 1.25 1.25 6 1.500 1.800 2.86 26..
150 6-26Q 1.50 1.50 6 1.750 1.800 5.28 26..
CEL 100 6-26Q 1.00 1.00 6 1.250 1.800 1.54 26..
125 6-26Q 1.25 1.25 6 1.500 1.800 2.86 26..
150 6-26Q 1.50 1.50 6 1.750 1.800 5.28 26..
Toolholder/
Insert
dimension
279
Grooving and Cut-off - Toolholders, external
Toolholders for Shallow Axial Grooves Snap Tap
CEAR/L
Dimensions in inch
Insert
Application I.C. Part No. h b l1 f1 l3 dmin
1/4 CEAR 100 6-10 1.00 1.00 6 1.38 .900 .60 1.60 10EA.
CEAL 100 6-10 1.00 1.00 6 1.38 .900 .60 1.60 10EA.
3/8 CEAR 100 6-14 1.00 1.00 6 1.44 .900 .90 1.60 14EA.
CEAL 100 6-14 1.00 1.00 6 1.44 .900 .90 1.60 14EA.
1/2 CEAR 100 6-20 1.00 1.00 6 1.54 1.10 1.10 1.60 20EA.
CEAL 100 6-20 1.00 1.00 6 1.54 1.10 1.10 1.60 20EA.
5/8 CEAR 100 6-26 1.00 1.00 6 1.69 1.40 1.40 1.60 26EA.
CEAL 100 6-26 1.00 1.00 6 1.69 1.40 1.40 1.60 26EA.
Toolholder/
Insert
dimension R L
280
Grooving and Cut-off - Toolholders, internal
Toolholders for Shallow Axial Grooves Snap Tap
SNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
7/32 SNR 000375 40-9 .55 .50 .375 4 - .299 0.2 9..
000375 50-9 .55 .50 .375 5 1.00 .259 0.2 9..
00050 55-9 .70 .50 .500 5.5 1.25 .319 0.3 9..
000625 60-9 .80 .65 .625 6 1.50 .378 0.4 9..
SNL 000375 40-9 .55 .50 .375 4 - .299 0.2 9..
000375 50-9 .55 .50 .375 5 1.00 .259 0.2 9..
00050 55-9 .70 .50 .500 5.5 1.25 .319 0.3 9..
000625 60-9 .80 .65 .625 6 1.50 .378 0.4 9..
*Holder is modified to accommodate smaller bore. Please see Technical Guide to modify bar.
Spare Parts, Parts included in delivery
Locking screw Key
Toolholder/
Insert
dimension
281
Grooving and Cut-off - Toolholders, internal
Toolholders for Shallow Grooves Snap Tap
CNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
1/4 CNR 00075 7-10 .95 .95 .750 7 - .490 1.70 10..
00100 8-10 1.20 1.00 1.000 8 - .620 2.20 10..
00125 10-10 1.50 1.25 1.250 10 - .750 3.08 10..
00150 12-10 1.80 1.60 1.500 12 - .860 5.05 10..
CNL 00075 7-10 .95 .95 .750 7 - .490 1.7 10..
00100 8-10 1.20 1.00 1.000 8 - .620 2.2 10..
00125 10-10 1.50 1.25 1.250 10 - .750 3.08 10..
3/8 CNR 00075 7-14 1.05 1.05 .750 7 - .570 1.70 14..
00100 8-14 1.30 1.05 1.000 8 - .700 2.20 14..
00125 10-14 1.60 1.25 1.250 10 - .830 3.08 14..
00150 12-14 1.90 1.6 1.500 12 - .940 5.05 14..
CNL 00075 7-14 1.05 1.05 .750 7 - .570 1.70 14..
00100 8-14 1.30 1.05 1.000 8 - .700 2.20 14..
00125 10-14 1.60 1.25 1.250 10 - .830 3.08 14..
*Holder is modified to accommodate smaller bore. Please see Technical Guide to modify bar.
Spare Parts, Parts included in delivery
Anvil for insert Anvil screw Key Clamp + Screw/ Key
type K
Toolholder/
Insert
dimension
282
Grooving and Cut-off - Toolholders, internal
Toolholders for Shallow Grooves Snap Tap
CNR/L
Dimensions in inch
Insert Min. Hole Min. Hole
Application I.C. Part No. Dia. Dia. Mod.* d l1 l3 f1
1/2 CNR 00100 8-20 1.40 1.40 1.000 8 - .810 2.20 20..
00125 10-20 1.70 1.40 1.250 10 - .940 3.08 20..
00150 12-20 2.00 1.60 1.500 12 - 1.06 5.50 20..
CNL 00100 8-20 1.40 1.40 1.000 8 - .810 2.20 20..
00125 10-20 1.70 1.40 1.250 10 - .940 3.08 20..
00150 12-20 2.00 1.60 1.500 12 - 1.06 5.05 20..
5/8 CNR 00125 10-26 2.00 1.60 1.250 10 - 1.06 3.08 26..
00150 12-26 2.10 1.60 1.500 12 - 1.18 5.50 26..
00175 14-26 2.30 1.80 1.750 14 - 1.31 8.74 26..
00200 14-26 2.50 2.00 2.000 14 - 1.43 10.78 26..
00250 16-26 3.00 2.50 2.500 16 - 1.68 19.58 26..
CNL 00125 10-26 2.00 1.60 1.250 10 - 1.06 3.08 26..
00150 12-26 2.10 1.60 1.500 12 - 1.18 5.50 26..
00175 14-26 2.30 1.80 1.750 14 - 1.31 8.74 26..
00250 16-26 3.00 2.50 2.500 16 - 1.68 19.58 26..
*Holder is modified to accommodate smaller bore. Please see Technical Guide to modify bar.
Spare Parts, Parts included in delivery
Anvil for insert Anvil screw Key Clamp + Screw/ Key
type K
Toolholder/
Insert
dimension
283
Grooving and Cut-off - Inserts
Inserts - Cut-off, 150.10
Size Tolerances: Dimensions in inch
Size b1 l rε
b1 =
2 ±.002
2.5 ±.002 2 .088 .354 .006
3 ±.003 2.5 .098 .354 .007
4 ±.003 3 .122 .354 .008
5 ±.003 4 .161 .354 .009
6 ±.003 5 .200 .354 .010
6 .250 .354 .012
Toolholder range,
please see pages 286-287
Grades
Coated Uncoated
CP600
T20M
T25M
CP50
HX
Inserts Part No.
150.10-12
150.10 -2.5N-12 [ [ [
-2.5R6-12 [
-2.5L6-12 [
150.10 -3N-12 [ [ [
-3R6-12 [ [
-3L6-12 [ [
150.10 -4N-12 [ [ [
-4R6-12 [
-4L6-12 [
150.10 -5N-12 [ [
150.10 -6N-12 [ [
150.10-14
150.10 -2.5N-14 [ [ [
-2.5R6-14 [
-2.5L6-14 [
150.10 -3N-14 [ [ [ [
-3R6-14 [ [
-3L6-14 [ [
150.10 -4N-14 [ [ [ [
-4R6-14 [
-4L6-14 [
150.10 -5N-14 [ [ [
150.10 -6N-14 [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
284
Grooving and Cut-off - Inserts
Inserts - Cut-off, 150.10
Grades
Coated Uncoated
CP600
T20M
T25M
CP50
HX
Inserts Part No.
150.10-16
150.10 -2N-16 [ [ [
150.10 -2.5N-16 [ [ [ [
-2.5R6-16 [ [
-2.5L6-16 [
150.10 -3N-16 [ [ [ [
-3R6-16 [ [ [
-3L6-16 [ [
150.10 -4N-16 [ [ [ [
-4R6-16 [ [
-4L6-16 [
150.10 -5N-16 [ [ [ [
-5R6-16 [
-5L6-16 [
150.10 -6N-16 [ [ [ [
-6R6-16 [
-6L6-16 [
[ Stock standard
Subject to change refer to current price and stock-list
285
Grooving and Cut-off - Toolholders
Tool Block R/L150.10...-15 and HSS-blade 150.10-15 for Cut-off
HSS-blade 150.10-15
Dimensions in inch
Spare Parts
Mounting screw * Key for change
of insert*
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
286
Grooving and Cut-off - Toolholders
Tool Block 150.10-20/25 and HSS-blade 150.10-20/25 for Cut-off
Tool Block 150.10-...-20/25
Dimensions in inch
150.10 -10-20 .625 .625 .842 1.024 .50 1.62 3.50 1.41 - - - 150.10-20..
-12-20 .750 .750 .842 1.024 .38 1.62 3.50 1.53 - - - 150.10-20..
-16-20 1.00 1.00 .842 1.024 .13 1.62 3.50 1.78 - - - 150.10-20..
-16-25 1.00 1.00 .842 1.260 .38 1.62 4.50 1.78 - - - 150.10-25..
-20-25 1.25 1.25 .842 1.260 .13 1.62 4.50 2.03 - - - 150.10-25..
Toolholder/
Insert
dimension
287
Railway wheel machining
Cassettes for Re-machining operations
R/L 175.32
Dimensions in inch
Insert Gage
Application I.C. Part No. h1 b l2 l1 f1 insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
288
Railway wheel machining - Inserts
LNUX
Tolerances: Dimensions in inch
Size l b s h rε
l = ± .006
b = ± .005
s = ± .006 19 .748 .394 .748 .250 .157
rε = ± .004 30 1.181 .472 .748 .250 .157
Grades
Coated
TP100
TP200
TX150
Inserts Part No.
LNUX-MF
LNUX 191940-MF [ [ [
301940-MF [ [ [
LNUX-MR
LNUX 191940-MR [ [ [
301940-MR [ [ [
[ Stock standard
Subject to change refer to current price and stock-list
289
Application overview – Seco Capto
External turning
DCLNR/L 95° DCRNR/L 75° DCKNR/L 75° PDJNR/L 93° PDNNN 63° DRSNR/L
DDJNR/L DDNNN
page 300-301 page 302-303 page 304-305 page 306 page 307 page 308
DSRNR/L 75° DSSNR/L 45° DSDNN 45° DSKNR/L 75° DTJNR/L 93° DTGNR/L 90°
page 310-311 page 312-313 page 314 page 316-317 page 318 page 319
DTNNR/L 63° DTTNR/L 60° DTFNR/L 90° PVJNR/L 93° MVJNR/L 93° PWLNR/L 95°
page 320 page 321 page 322 page 323 page 324 page 325
SCLCR/L 95° SDJCR/L 93° SDNCN 62°30' SRSCR/L SRDCN SSRCR/L 75°
page 326 page 327 page 328 page 329-330 page 331-332 page 333
STJCR/L 93° STGCR/L 90° SVHBR/L 107°30' SVJBR/L 93° SVVBN 72°30' SWLCR/L 95°
page 334 page 335 page 336 page 337 page 338 page 339
page 340 page 341 page 342 page 343 page 344
290
Application overview – Seco Capto
Internal turning
SDUNR/L 93° SDQNR/L 107°30' PVUNR/L 93° PWLNR/L 95° SCLCR/L 95°
PDUNR/L PDQNR/L MVUNR/L
page 345 page 346 page 347 page 348-349 page 350-352
SDUCR/L 93° SDUCR/L-..X 93° SSKCR/L 75° STFCR/L 90° SVQBR/L 107°30'
page 354-355 page 356 page 358-359 page 360-361 page 362-364
SWLCR/L 95°
page 365
MDT
CFIR/L Ext. CGGR/L Int.
Threading
CER/L Ext. SNR Int.
CER/L-..C CNR/L, CNR/L..C
291
Seco Capto - Clamping units, Type 2085
Straight shank type (Inch)
Dimensions in inch
h Capto
Shank inch size Part No. h1y l1x l21 b2 l1z bc h2 Th
1.00x1.00 2.00 C4 C4-RC2085-24102-16M 1.00 4.04 1.20 1.89 .94 1.00 2.15 G1/8 2.20
1.00x1.00 2.00 C4 C4-LC2085-24102-16M 1.00 4.04 1.20 1.89 .94 1.00 2.15 G1/8 2.20
1.25x1.25 2.50 C5 C5-RC2085-32130-20M 1.25 5.14 1.46 2.52 1.26 1.25 2.65 G1/8 4.40
1.25x1.25 2.50 C5 C5-LC2085-32130-20M 1.25 5.14 1.46 2.52 1.26 1.25 2.65 G1/8 4.40
292
Seco Capto - Clamping units, Type 2085
Straight shank type (Metric)
Dimensions in mm
h Capto
Shank mm size Part No. h1y l1x l22 l21 b2 l1z bc h2 Th
293
Seco Capto - Clamping units, Type 2000/3000
Cylindrical type (Inch)
Dimensions in mm
dmm Capto
inch size Part No. D1 lc l1z l21* hry h Th
1.50 C4 C4-NC2000 -10020-A24 2.03 3.94 .79 .32 1.02 1.46 G1/8 2.42
2.00 C4 -12020-A32 2.03 4.72 .79 1.10 1.10 1.85 G1/8 -
2.00 C5 C5-NC2000 -12024-A32 2.42 4.72 .95 - 1.22 1.85 G1/8 4.40
1.50 C4 C4-NC3000 -10020-A24 2.03 3.94 .79 .39 1.02 1.38 G1/8 2.42
2.00 C4 -12020-A32** 2.03 4.72 .79 1.18 1.10 1.85 G1/8 -
2.00 C5 C5-NC3000 -12024-A32 2.42 4.72 .95 - 1.22 1.85 G1/8 4.40
294
Seco Capto - Clamping units, Type 2000/3000
Cylindrical type (Metric)
Dimensions in mm
dmm Capto
mm size Part No. D1 lc l1z l21* hry h Th
295
Seco Capto - Clamping units, Type VDI
VDI type angled DIN69880
Dimensions in inch
VDI Capto
dmm size Part No. l1z ltz l1x b2 h2 hry h21
296
Seco Capto - Clamping units, Type VDI
VDI type straight DIN69880
Dimensions in inch
VDI Capto
dmm size Part No. l1z l4 b2 b21 h2 hry
C5-RC2040-00085M
C5-LC2040-00085M
297
Seco Capto - Clamping units, Type 2090
For special applications
Dimensions in inch
Capto
size Part No. ltz l1z h2 h21 b2 l1x
298
Seco Capto
299
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP
DCLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
95°
3/8 C4-DCLNR-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 322
C4-DCLNL-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 322
1/2 C4-DCLNR-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 432
C4-DCLNL-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 432
5/8 C4-DCLNR-27055-16 1.57 1.06 2.17 2.95 6.50 -6 -6 0.88 CNMG 543
C4-DCLNL-27055-16 1.57 1.06 2.17 2.95 6.50 -6 -6 0.88 CNMG 543
3/8 C5-DCLNR-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 322
C5-DCLNL-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 322
1/2 C5-DCLNR-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 432
C5-DCLNL-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 432
5/8 C5-DCLNR-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 543
C5-DCLNL-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 543
3/4 C5-DCLNR-35060-19 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 643
C5-DCLNL-35060-19 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 643
Toolholder/
Insert
dimension
300
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP
DCLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
95°
1/2 C6-DCLNR-45065-12 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 432
C6-DCLNL-45065-12 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 432
5/8 C6-DCLNR-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 543
C6-DCLNL-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 543
3/4 C6-DCLNR-45065-19 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 643
C6-DCLNL-45065-19 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 643
Toolholder/
Insert
dimension
301
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGP, CNMA, CNMG and CNMP
DCRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
3/8 C4-DCRNR-22050-09 1.57 0.87 1.97 2.95 6.50 -6 -6 1.10 CNMG 322
C4-DCRNL-22050-09 1.57 0.87 1.97 2.95 6.50 -6 -6 1.10 CNMG 322
1/2 C4-DCRNR-22050-12 1.57 0.87 1.97 2.95 6.50 -6 -6 1.10 CNMG 432
C4-DCRNL-22050-12 1.57 0.87 1.97 2.95 6.50 -6 -6 1.10 CNMG 432
5/8 C4-DCRNR-22055-16 1.57 0.87 2.17 2.95 6.50 -6 -6 1.10 CNMG 543
C4-DCRNL-22055-16 1.57 0.87 2.17 2.95 6.50 -6 -6 1.10 CNMG 543
3/8 C5-DCRNR-27060-09 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 322
C5-DCRNL-27060-09 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 322
1/2 C5-DCRNR-27060-12 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 432
C5-DCRNL-27060-12 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 432
5/8 C5-DCRNR-27060-16 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 543
C5-DCRNL-27060-16 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 543
3/4 C5-DCRNR-27060-19 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 643
C5-DCRNL-27060-19 1.97 1.06 2.36 3.74 6.50 -6 -6 1.98 CNMG 643
Toolholder/
Insert
dimension
302
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP
DCRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
1/2 C6-DCRNR-35065-12 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 CNMG 432
C6-DCRNL-35065-12 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 CNMG 432
5/8 C6-DCRNR-35065-16 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 CNMG 543
C6-DCRNL-35065-16 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 CNMG 543
3/4 C6-DCRNR-35065-19 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 CNMG 643
C6-DCRNL-35065-19 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 CNMG 643
Toolholder/
Insert
dimension
303
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP
DCKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
3/8 C4-DCKNR-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 322
C4-DCKNL-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 322
1/2 C4-DCKNR-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 432
C4-DCKNL-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 432
5/8 C4-DCKNR-27050-16 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 543
C4-DCKNL-27050-16 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNMG 543
3/8 C5-DCKNR-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 322
C5-DCKNL-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 322
1/2 C5-DCKNR-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 432
C5-DCKNL-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 432
5/8 C5-DCKNR-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 543
C5-DCKNL-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 543
3/4 C5-DCKNR-35060-19 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 643
C5-DCKNL-35060-19 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNMG 643
Toolholder/
Insert
dimension
304
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGA, CNGP, CNMA, CNMG and CNMP
DCKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
1/2 C6-DCKNR-45065-12 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 432
C6-DCKNL-45065-12 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 432
5/8 C6-DCKNR-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 543
C6-DCKNL-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 543
3/4 C6-DCKNR-45065-19 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 643
C6-DCKNL-45065-19 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 CNMG 643
Toolholder/
Insert
dimension
305
Seco Capto, Turning - Toolholders, external
Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM and DNMP
PDJNR/L DDJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
93°
3/8 C4-PDJNR-27050-11 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 DNMG 332
C4-PDJNL-27050-11 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 DNMG 332
1/2 C4-DDJNR-27055-15-04 1.57 1.06 2.17 2.95 6.50 -6 -6 0.88 DNMG 432
C4-DDJNL-27055-15-04 1.57 1.06 2.17 2.95 6.50 -6 -6 0.88 DNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list * Anvil UDN 433 for insert DN..44. to be ordered separately
306
Seco Capto, Turning - Toolholders, external
Toolholders for inserts DNGA, DNGM, DNGP, DNMA, DNMG, DNMM and DNMP
PDNNN DDNNN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
63°
3/8 C4-PDNNN-00050-11 1.57 0.02 1.97 1.57 6.50 -9 -5 0.88 DNMG 332
1/2 C4-DDNNN-00050-15-04 1.57 0.02 1.97 1.57 6.50 -9 -5 0.66 DNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list * Anvil UDN 433 for insert DN..44. to be ordered separately
307
Seco Capto, Turning - Toolholders, external
Toolholders for inserts RNMA and RNMG
DRSNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
Toolholder/
Insert
dimension
308
Seco Capto
309
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
3/8 C4-DSRNR-22050-09 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 SNMG 322
C4-DSRNL-22050-09 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 SNMG 322
1/2 C4-DSRNR-22050-12 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 SNMG 432
C4-DSRNL-22050-12 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 SNMG 432
5/8 C4-DSRNR-22055-15 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 SNMG 543
C4-DSRNL-22055-15 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 SNMG 543
3/8 C5-DSRNR-27060-09 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 322
C5-DSRNL-27060-09 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 322
1/2 C5-DSRNR-27060-12 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 432
C5-DSRNL-27060-12 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 432
5/8 C5-DSRNR-27060-15 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 543
C5-DSRNL-27060-15 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 543
3/4 C5-DSRNR-27060-19 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 643
C5-DSRNL-27060-19 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 SNMG 643
Toolholder/
Insert
dimension
310
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
1/2 C6-DSRNR-35065-12 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 SNMG 432
C6-DSRNL-35065-12 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 SNMG 432
5/8 C6-DSRNR-35065-15 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 SNMG 543
C6-DSRNL-35065-15 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 SNMG 543
3/4 C6-DSRNR-35065-19 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 SNMG 643
C6-DSRNL-35065-19 2.48 1.38 2.56 4.76 6.50 -6 -6 3.30 SNMG 643
Toolholder/
Insert
dimension
311
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSSNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 f1S l1 l1S Dm1 Dm2 γo° γp° insert
45°
3/8 C4-DSSNR-27044-09 1.57 1.06 0.82 1.73 1.97 2.95 6.50 0 -8 0.88 SNMG 322
C4-DSSNL-27044-09 1.57 1.06 0.82 1.73 1.97 2.95 6.50 0 -8 0.88 SNMG 322
1/2 C4-DSSNR-27042-12 1.57 1.06 0.74 1.65 1.98 2.95 6.50 0 -8 0.88 SNMG 432
C4-DSSNL-27042-12 1.57 1.06 0.74 1.65 1.98 2.95 6.50 0 -8 0.88 SNMG 432
5/8 C4-DSSNR-27045-15 1.57 1.06 0.66 1.77 2.17 2.95 6.50 0 -8 0.88 SNMG 543
C4-DSSNL-27045-15 1.57 1.06 0.66 1.77 2.17 2.95 6.50 0 -8 0.88 SNMG 543
3/8 C5-DSSNR-35054-09 1.97 1.38 1.14 2.13 2.36 3.74 6.50 0 -8 1.54 SNMG 322
C5-DSSNL-35054-09 1.97 1.38 1.14 2.13 2.36 3.74 6.50 0 -8 1.54 SNMG 322
1/2 C5-DSSNR-35052-12 1.97 1.38 1.05 2.05 2.37 3.74 6.50 0 -8 1.54 SNMG 432
C5-DSSNL-35052-12 1.97 1.38 1.05 2.05 2.37 3.74 6.50 0 -8 1.54 SNMG 432
5/8 C5-DSSNR-35050-15 1.97 1.38 0.98 1.97 2.37 3.74 6.50 0 -8 1.54 SNMG 543
C5-DSSNL-35050-15 1.97 1.38 0.98 1.97 2.37 3.74 6.50 0 -8 1.54 SNMG 543
3/4 C5-DSSNR-35048-19 1.97 1.38 0.89 1.89 2.38 3.74 6.50 0 -8 1.54 SNMG 643
C5-DSSNL-35048-19 1.97 1.38 0.89 1.89 2.38 3.74 6.50 0 -8 1.54 SNMG 643
Toolholder/
Insert
dimension
312
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSSNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 f1S l1 l1S Dm1 Dm2 γo° γp° insert
45°
1/2 C6-DSSNR-45056-12 2.48 1.77 1.44 2.20 2.53 4.76 6.50 0 -8 2.64 SNMG 432
C6-DSSNL-45056-12 2.48 1.77 1.44 2.20 2.53 4.76 6.50 0 -8 2.64 SNMG 432
5/8 C6-DSSNR-45054-15 2.48 1.77 1.37 2.13 2.53 4.76 6.50 0 -8 2.64 SNMG 543
C6-DSSNL-45054-15 2.48 1.77 1.37 2.13 2.53 4.76 6.50 0 -8 2.64 SNMG 543
3/4 C6-DSSNR-45052-19 2.48 1.77 1.28 2.05 2.54 4.76 6.50 0 -8 2.64 SNMG 643
C6-DSSNL-45052-19 2.48 1.77 1.28 2.05 2.54 4.76 6.50 0 -8 2.64 SNMG 643
Toolholder/
Insert
dimension
313
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSDNN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
45°
3/8 C4-DSDNN-00050-09 1.57 0.01 1.97 1.57 6.50 -6 -6 0.88 SNMG 322
1/2 C4-DSDNN-00050-12 1.57 0.01 1.97 1.57 6.50 -6 -6 0.88 SNMG 432
5/8 C4-DSDNN-00055-15 1.57 0.02 2.17 1.57 6.50 -6 -6 0.88 SNMG 543
3/8 C5-DSDNN-00060-09 1.97 0.01 2.36 1.97 6.50 -6 -6 1.54 SNMG 322
1/2 C5-DSDNN-00060-12 1.97 0.01 2.36 1.97 6.50 -6 -6 1.54 SNMG 432
5/8 C5-DSDNN-00060-15 1.97 0.02 2.36 1.97 6.50 -6 -6 1.54 SNMG 543
3/4 C5-DSDNN-00060-19 1.97 0.02 2.36 1.97 6.50 -6 -6 1.54 SNMG 643
1/2 C6-DSDNN-00065-12 2.48 0.01 2.56 2.48 6.50 -6 -6 2.86 SNMG 432
5/8 C6-DSDNN-00065-15 2.48 0.02 2.56 2.48 6.50 -6 -6 2.86 SNMG 543
3/4 C6-DSDNN-00065-19 2.48 0.02 2.56 2.48 6.50 -6 -6 2.86 SNMG 643
Toolholder/
Insert
dimension
314
Seco Capto
315
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
3/8 C4-DSKNR-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMG 322
C4-DSKNL-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMG 322
1/2 C4-DSKNR-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMG 432
C4-DSKNL-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMG 432
5/8 C4-DSKNR-27050-15 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMG 543
C4-DSKNL-27050-15 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMG 543
3/8 C5-DSKNR-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 322
C5-DSKNL-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 322
1/2 C5-DSKNR-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 432
C5-DSKNL-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 432
5/8 C5-DSKNR-35060-15 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 543
C5-DSKNL-35060-15 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 543
3/4 C5-DSKNR-35060-19 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 643
C5-DSKNL-35060-19 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMG 643
Toolholder/
Insert
dimension
316
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGA, SNMA, SNMG, SNMM and SNMP
DSKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
1/2 C6-DSKNR-45065-12 2.48 1.77 2.56 4.76 6.50 -6 -6 3.30 SNMG 432
C6-DSKNL-45065-12 2.48 1.77 2.56 4.76 6.50 -6 -6 3.30 SNMG 432
5/8 C6-DSKNR-45065-15 2.48 1.77 2.56 4.76 6.50 -6 -6 3.30 SNMG 543
C6-DSKNL-45065-15 2.48 1.77 2.56 4.76 6.50 -6 -6 3.30 SNMG 543
3/4 C6-DSKNR-45065-19 2.48 1.77 2.56 4.76 6.50 -6 -6 3.30 SNMG 643
C6-DSKNL-45065-19 2.48 1.77 2.56 4.76 6.50 -6 -6 3.30 SNMG 643
Toolholder/
Insert
dimension
317
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP
DTJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
93°
3/8 C4-DTJNR-27050-16 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
C4-DTJNL-27050-16 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
1/2 C4-DTJNR-27050-22 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 432
C4-DTJNL-27050-22 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 432
3/8 C5-DTJNR-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
C5-DTJNL-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
1/2 C5-DTJNR-35060-22 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
C5-DTJNL-35060-22 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
3/8 C6-DTJNR-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 332
C6-DTJNL-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 332
1/2 C6-DTJNR-45065-22 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 432
C6-DTJNL-45065-22 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvil UTN 333 for insert TN..32., to be ordered separately
318
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP
DTGNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
90°
3/8 C4-DTGNR-27050-16 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
C4-DTGNL-27050-16 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
1/2 C4-DTGNR-27050-22 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 432
C4-DTGNL-27050-22 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 TNMG 432
3/8 C5-DTGNR-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
C5-DTGNL-35060-16 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
1/2 C5-DTGNR-35060-22 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
C5-DTGNL-35060-22 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
3/8 C6-DTGNR-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 332
C6-DTGNL-45065-16 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 332
1/2 C6-DTGNR-45065-22 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 432
C6-DTGNL-45065-22 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 432
5/8 C6-DTGNR-45065-27 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 543
C6-DTGNL-45065-27 2.48 1.77 2.56 4.76 6.50 -6 -6 3.08 TNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvil UTN 333 for insert TN..32., to be ordered separately
319
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP
DTNNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
63°
3/8 C4-DTNNR-00050-16 1.57 0.01 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
C4-DTNNL-00050-16 1.57 0.01 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
1/2 C4-DTNNR-00050-22 1.57 0.01 1.97 2.95 6.50 -6 -6 1.10 TNMG 432
C4-DTNNL-00050-22 1.57 0.01 1.97 2.95 6.50 -6 -6 1.10 TNMG 432
3/8 C5-DTNNR-00060-16 1.97 0.01 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
C5-DTNNL-00060-16 1.97 0.01 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
1/2 C5-DTNNR-00060-22 1.97 0.01 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
C5-DTNNL-00060-22 1.97 0.01 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvil UTN 333 for insert TN..32., to be ordered separately
320
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP
DTTNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
60°
3/8 C4-DTTNR-22050-16 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
C4-DTTNL-22050-16 1.57 0.87 1.97 2.95 6.50 -6 -6 0.88 TNMG 332
1/2 C4-DTTNR-22055-22 1.57 0.87 2.17 2.95 6.50 -6 -6 0.88 TNMG 432
C4-DTTNL-22055-22 1.57 0.87 2.17 2.95 6.50 -6 -6 0.88 TNMG 432
3/8 C5-DTTNR-27060-16 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
C5-DTTNL-27060-16 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 TNMG 332
1/2 C5-DTTNR-27060-22 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
C5-DTTNL-27060-22 1.97 1.06 2.36 3.74 6.50 -6 -6 1.76 TNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvil UTN 333 for insert TN..32., to be ordered separately
321
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TNGA, TNMA, TNMG, TNMM and TNMP
DTFNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
90°
3/8 C4-DTFNR-27050-16 1.57 1.06 1.97 2.95 6.50 -5 -6 0.88 TNMG 332
C4-DTFNL-27050-16 1.57 1.06 1.97 2.95 6.50 -5 -6 0.88 TNMG 332
1/2 C4-DTFNR-27050-22 1.57 1.06 1.97 2.95 6.50 -5 -6 0.88 TNMG 432
C4-DTFNL-27050-22 1.57 1.06 1.97 2.95 6.50 -5 -6 0.88 TNMG 432
3/8 C5-DTFNR-35060-16 1.97 1.38 2.36 3.74 6.50 -5 -6 1.76 TNMG 332
C5-DTFNL-35060-16 1.97 1.38 2.36 3.74 6.50 -5 -6 1.76 TNMG 332
1/2 C5-DTFNR-35060-22 1.97 1.38 2.36 3.74 6.50 -5 -6 1.76 TNMG 432
C5-DTFNL-35060-22 1.97 1.38 2.36 3.74 6.50 -5 -6 1.76 TNMG 432
3/8 C6-DTFNR-45065-16 2.48 1.77 2.56 4.76 6.50 -5 -6 3.08 TNMG 332
C6-DTFNL-45065-16 2.48 1.77 2.56 4.76 6.50 -5 -6 3.08 TNMG 332
1/2 C6-DTFNR-45065-22 2.48 1.77 2.56 4.76 6.50 -5 -6 3.08 TNMG 432
C6-DTFNL-45065-22 2.48 1.77 2.56 4.76 6.50 -5 -6 3.08 TNMG 432
5/8 C6-DTFNR-45065-27 2.48 1.77 2.56 4.76 6.50 -5 -6 3.08 TNMG 543
C6-DTFNL-45065-27 2.48 1.77 2.56 4.76 6.50 -5 -6 3.08 TNMG 543
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvil UTN 333 for insert TN..32., to be ordered separately
322
Seco Capto, Turning - Toolholders, external
Toolholders for inserts VNMG
PVJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
93°
5/16 C4-PVJNR-27050-13 1.57 1.06 1.97 2.95 6.50 -4.5 -13.5 0.88 VNMG 2.531
C4-PVJNL-27050-13 1.57 1.06 1.97 2.95 6.50 -4.5 -13.5 0.88 VNMG 2.531
C5-PVJNR-35060-13 1.97 1.38 2.36 3.74 6.50 -4.5 -13.5 1.76 VNMG 2.531
C5-PVJNL-35060-13 1.97 1.38 2.36 3.74 6.50 -4.5 -13.5 1.76 VNMG 2.531
Toolholder/
Insert
dimension
323
Seco Capto, Turning - Toolholders, external
Toolholders for inserts VNGA, VNGP, VNGM, VNMA, VNMP and VNMG
MVJNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
93°
3/8 C4-MVJNL-27050-16 1.57 1.06 1.97 2.95 6.50 -4.5 -13.5 0.88 VNMG 332
C4-MVJNR-27050-16 1.57 1.06 1.97 2.95 6.50 -4.5 -13.5 0.88 VNMG 332
C5-MVJNR-35060-16 1.97 1.38 2.36 3.74 6.50 -4.5 -13.5 1.76 VNMG 332
C5-MVJNL-35060-16 1.97 1.38 2.36 3.74 6.50 -4.5 -13.5 1.76 VNMG 332
C6-MVJNR-45065-16 2.48 1.77 2.56 4.76 6.50 -4.5 -13.5 3.08 VNMG 332
C6-MVJNL-45065-16 2.48 1.77 2.56 4.76 6.50 -4.5 -13.5 3.08 VNMG 332
Toolholder/
Insert
dimension
324
Seco Capto, Turning - Toolholders, external
Toolholders for inserts WNGP, WNMA, WNMG, WNMP and WNMM
PWLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
95°
3/8 C4-PWLNR-27050-06 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 WNMG 332
C4-PWLNL-27050-06 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 WNMG 332
1/2 C4-PWLNR-27050-08 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 WNMG 432
C4-PWLNL-27050-08 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 WNMG 432
3/8 C5-PWLNR-35060-06 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 WNMG 332
C5-PWLNL-35060-06 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 WNMG 332
1/2 C5-PWLNR-35060-08 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 WNMG 432
C5-PWLNL-35060-08 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 WNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
**Anvil WAI423 for insert WN..44., to be ordered separately
***Wedge WNW08 for insert WNMM 4.. to be ordered separately
325
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CCGW, CCMT and CCMW
SCLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
95°
3/8 C3-SCLCR-22040-09 1.26 0.87 1.57 0 0 0.44 CCMT 32.52
C3-SCLCL-22040-09 1.26 0.87 1.57 0 0 0.44 CCMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
326
Seco Capto, Turning - Toolholders, external
Toolholders for inserts DCMT and DCMW
SDJCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
93°
1/4 C3-SDJCR-22040-07 1.26 0.87 1.57 0 0 0.44 DCMT 21.51
C3-SDJCL-22040-07 1.26 0.87 1.57 0 0 0.44 DCMT 21.51
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
327
Seco Capto, Turning - Toolholders, external
Toolholders for inserts DCMT and DCMW
SDNCN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
62°30'
3/8 C3-SDNCN-00040-11 1.26 0.02 1.57 0 0 0.44 DCMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
328
Seco Capto, Turning - Toolholders, external
Toolholders for inserts RCMT and RCMM
SRSCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
329
Seco Capto, Turning - Toolholders, external
Toolholders for inserts RCMT and RCMM
SRSCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
330
Seco Capto, Turning - Toolholders, external
Toolholders for inserts RCMT and RCMM
SRDCN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 ar γo° γp° insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
331
Seco Capto, Turning - Toolholders, external
Toolholders for inserts RCMT and RCMM
SRDCN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 ar γo° γp° insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
332
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SCMT and SCMW
SSRCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
75°
3/8 C3-SSRCR-17040-09 1.26 0.67 1.57 0 0 0.44 SCMT 32.52
C3-SSRCL-17040-09 1.26 0.67 1.57 0 0 0.44 SCMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
333
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TCMT and TCMW
STJCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
93°
1/4 C3-STJCR-22040-11 1.26 0.87 1.57 0 0 0.44 TCMT 21.51
C3-STJCL-22040-11 1.26 0.87 1.57 0 0 0.44 TCMT 21.51
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
334
Seco Capto, Turning - Toolholders, external
Toolholders for inserts TCMT and TCMW
STGCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
90°
1/4 C3-STGCR-22040-11 1.26 0.87 1.57 0 0 0.44 TCMT 21.51
C3-STGCL-22040-11 1.26 0.87 1.57 0 0 0.44 TCMT 21.51
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
335
Seco Capto, Turning - Toolholders, external
Toolholders for inserts VBGW, VBMT
SVHBR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
107°30'
1/4 C3-SVHBR-22040-11 1.26 0.87 1.57 0 0 0.44 VBMT 21.51
C3-SVHBL-22040-11 1.26 0.87 1.57 0 0 0.44 VBMT 21.51
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
336
Seco Capto, Turning - Toolholders, external
Toolholders for inserts VBGW, VBMT
SVJBR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
93°
1/4 C3-SVJBR-22040-11 1.26 0.87 1.57 0 0 0.44 VBMT 21.51
C3-SVJBL-22040-11 1.26 0.87 1.57 0 0 0.44 VBMT 21.51
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
337
Seco Capto, Turning - Toolholders, external
Toolholders for inserts VBGW, VBMT
SVVBN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 γo° γp° insert
72°30'
1/4 C3-SVVBN-00040-11 1.26 0.01 1.57 0 0 0.44 VBMT 21.51
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
338
Seco Capto, Turning - Toolholders, external
Toolholders for inserts WCMT
SWLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
95°
3/8 C4-SWLCR-27050-06 1.57 1.06 1.97 2.56 6.50 0 0 0.88 WCMT 32.52
C4-SWLCL-27050-06 1.57 1.06 1.97 2.56 6.50 0 0 0.88 WCMT 32.52
Toolholder/
Insert
dimension
339
Seco Capto, Turning - Toolholders, external
Toolholders for inserts CNGN and CNMN
CCLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
95°
3/8 C4-CCLNR-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNGN 322
C4-CCLNL-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNGN 322
1/2 C4-CCLNR-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNGN 432
C4-CCLNL-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 CNGN 432
3/8 C5-CCLNR-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNGN 322
C5-CCLNL-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNGN 322
1/2 C5-CCLNR-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNGN 432
C5-CCLNL-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 CNGN 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvils for alternative inserts, to be ordered separately: UCN 323 for insert CN..33.
UCN 453 for insert CN..42.
340
Seco Capto, Turning - Toolholders, external
Toolholders for inserts RNGN and RNMN
CRSNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvils for alternative inserts, to be ordered separately: URN 44 for insert RN..43.
341
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGN, SNMN and SNU
CSRNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
3/8 C4-CSRNR-22050-09 1.57 0.87 1.97 2.95 6.50 -6 -8 0.88 SNMN 322
C4-CSRNL-22050-09 1.57 0.87 1.97 2.95 6.50 -6 -8 0.88 SNMN 322
1/2 C4-CSRNR-22050-12 1.57 0.87 1.97 2.95 6.50 -6 -8 0.88 SNMN 432
C4-CSRNL-22050-12 1.57 0.87 1.97 2.95 6.50 -6 -8 0.88 SNMN 432
3/8 C5-CSRNR-27060-09 1.97 1.06 2.36 3.74 6.50 -6 -8 0.88 SNMN 322
C5-CSRNL-27060-09 1.97 1.06 2.36 3.74 6.50 -6 -8 0.88 SNMN 322
1/2 C5-CSRNR-27060-12 1.97 1.06 2.36 3.74 6.50 -6 -8 1.76 SNMN 432
C5-CSRNL-27060-12 1.97 1.06 2.36 3.74 6.50 -6 -8 1.76 SNMN 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvils for alternative inserts, to be ordered separately: USN 323 for insert SN..33.
USN 453 for insert SN..42.
342
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGN, SNMN and SNU
CSDNN
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
45°
3/8 C4-CSDNN-00050-09 1.57 0.01 1.97 1.57 6.50 -6 -6 0.88 SNMN 322
1/2 C4-CSDNN-00050-12 1.57 0.01 1.97 1.57 6.50 -6 -6 0.88 SNMN 432
3/8 C5-CSDNN-00060-09 1.97 0.01 2.36 1.97 6.50 -6 -6 1.54 SNMN 322
1/2 C5-CSDNN-00060-12 1.97 0.01 2.36 1.97 6.50 -6 -6 1.54 SNMN 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvils for alternative inserts, to be ordered separately: USN 323 for insert SN..33.
USN 453 for insert SN..42.
343
Seco Capto, Turning - Toolholders, external
Toolholders for inserts SNGN, SNMN and SNU
CSKNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. dmm f1 l1 Dm1 Dm2 γo° γp° insert
75°
3/8 C4-CSKNR-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMN 322
C4-CSKNL-27050-09 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMN 322
1/2 C4-CSKNR-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMN 432
C4-CSKNL-27050-12 1.57 1.06 1.97 2.95 6.50 -6 -6 0.88 SNMN 432
3/8 C5-CSKNR-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMN 322
C5-CSKNL-35060-09 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMN 322
1/2 C5-CSKNR-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMN 432
C5-CSKNL-35060-12 1.97 1.38 2.36 3.74 6.50 -6 -6 1.76 SNMN 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *Anvils for alternative inserts, to be ordered separately: USN 323 for insert SN..33.
USN 453 for insert SN..42.
344
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts DNMA and DNMG
SDUNR/L PDUNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
93°
3/8 C4-SDUNR -11065-11 0.63 1.57 0.43 2.56 1.61 0.79 -5 -17 0.44 DNMG 332
-13080-11 0.79 1.57 0.51 3.15 2.20 0.98 -5 -14 0.88 DNMG 332
C4-SDUNL -11065-11 0.63 1.57 0.43 2.56 1.61 0.79 -5 -17 0.44 DNMG 332
-13080-11 0.79 1.57 0.51 3.15 2.20 0.98 -5 -14 0.88 DNMG 332
C4-PDUNR -17090-11 0.98 1.57 0.67 3.54 2.68 1.26 -5 -13 1.10 DNMG 332
-22110-11 1.26 1.57 0.87 4.33 3.50 1.57 -5 -11 1.54 DNMG 332
C4-PDUNL -17090-11 0.98 1.57 0.67 3.54 2.68 1.26 -5 -13 1.10 DNMG 332
-22110-11 1.26 1.57 0.87 4.33 3.50 1.57 -5 -11 1.54 DNMG 332
93°
3/8 C5-SDUNR -13080-11 0.79 1.97 0.51 3.15 2.20 0.98 -5 -14 1.32 DNMG 332
C5-SDUNL -13080-11 0.79 1.97 0.51 3.15 2.20 0.98 -5 -14 1.32 DNMG 332
C5-PDUNR -17090-11 0.98 1.97 0.67 3.54 2.64 1.26 -5 -13 1.54 DNMG 332
-22110-11 1.26 1.97 0.87 4.33 3.50 1.57 -5 -11 1.98 DNMG 332
C5-PDUNL -17090-11 0.98 1.97 0.67 3.54 2.64 1.26 -5 -13 1.54 DNMG 332
-22110-11 1.26 1.97 0.87 4.33 3.50 1.57 -5 -11 1.98 DNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
345
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts DNMA and DNMG
SDQNR/L PDQNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
107°30'
3/8 C4-SDQNR -11065-11 0.63 1.57 0.43 2.56 1.61 0.79 -5 -17 0.88 DNMG 332
-13080-11 0.79 1.57 0.51 3.15 2.20 0.98 -5 -17 0.88 DNMG 332
C4-SDQNL -11065-11 0.63 1.57 0.43 2.56 1.61 0.79 -5 -17 0.88 DNMG 332
-13080-11 0.79 1.57 0.51 3.15 2.20 0.98 -5 -17 0.88 DNMG 332
C4-PDQNR -17090-11 0.98 1.57 0.67 3.54 2.68 1.26 -5 -16 1.10 DNMG 332
-22110-11 1.26 1.57 0.87 4.33 3.50 1.57 -5 -14 1.54 DNMG 332
C4-PDQNL -17090-11 0.98 1.57 0.67 3.54 2.68 1.26 -5 -16 1.10 DNMG 332
-22110-11 1.26 1.57 0.87 4.33 3.50 1.57 -5 -14 1.54 DNMG 332
107°30'
3/8 C5-SDQNR -13080-11 0.79 1.97 0.51 3.15 2.20 0.98 -5 -18 1.32 DNMG 332
C5-SDQNL -13080-11 0.79 1.97 0.51 3.15 2.20 0.98 -5 -18 1.32 DNMG 332
C5-PDQNR -17090-11 0.98 1.97 0.67 3.54 2.64 1.26 -5 -16 1.54 DNMG 332
-22110-11 1.26 1.97 0.87 4.33 3.50 1.57 -5 -14 1.98 DNMG 332
C5-PDQNL -17090-11 0.98 1.97 0.67 3.54 2.64 1.26 -5 -16 1.54 DNMG 332
-22110-11 1.26 1.97 0.87 4.33 3.50 1.57 -5 -14 1.98 DNMG 332
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
346
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts VNGA, VNGP, VNGM, VNMG and VNMP
PVUNR/L MVUNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
93°
5/16 C4-PVUNR -17090-13 0.98 1.57 0.67 3.54 2.68 1.26 -5 -14 1.10 VNMG 2.531
-22110-13 1.26 1.57 0.87 4.33 3.54 1.57 -5 -12 1.54 VNMG 2.531
C4-PVUNL -17090-13 0.98 1.57 0.67 3.54 2.68 1.26 -5 -14 1.10 VNMG 2.531
-22110-13 1.26 1.57 0.87 4.33 3.54 1.57 -5 -12 1.54 VNMG 2.531
3/8 C4-MVUNR -22110-16 1.26 1.57 0.87 4.33 3.54 1.57 -5 -12 1.54 VNMG 332
-27120-16 1.57 1.57 1.06 4.72 3.94 1.97 -5 -10 2.42 VNMG 332
C4-MVUNL -22110-16 1.26 1.57 0.87 4.33 3.54 1.57 -5 -12 1.54 VNMG 332
-27120-16 1.57 1.57 1.06 4.72 3.94 1.97 -5 -10 2.42 VNMG 332
5/16 C5-PVUNR -22110-13 1.26 1.97 0.87 4.33 3.50 1.57 -5 -12 1.98 VNMG 2.531
C5-PVUNL -22110-13 1.26 1.97 0.87 4.33 3.50 1.57 -5 -12 1.98 VNMG 2.531
3/8 C5-MVUNR -22110-16 1.26 1.97 0.87 4.33 3.50 1.57 -5 -12 1.98 VNMG 332
-27140-16 1.57 1.97 1.06 5.51 4.68 1.97 -5 -10 3.08 VNMG 332
C5-MVUNL -22110-16 1.26 1.97 0.87 4.33 3.50 1.57 -5 -12 1.98 VNMG 332
-27140-16 1.57 1.97 1.06 5.51 4.68 1.97 -5 -10 3.08 VNMG 332
C6-MVUNR -22120-16 1.26 2.48 0.87 4.72 3.46 1.57 -5 -12 3.08 VNMG 332
-27145-16 1.57 2.48 1.06 5.71 4.72 1.97 -5 -10 4.40 VNMG 332
C6-MVUNL -22120-16 1.26 2.48 0.87 4.72 3.46 1.57 -5 -12 3.08 VNMG 332
-27145-16 1.57 2.48 1.06 5.71 4.72 1.97 -5 -10 4.40 VNMG 332
Toolholder/
Insert
dimension
347
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts WNGP, WNMA, WNMG, and WNMP
PWLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
95°
3/8 C4-PWLNR -13080-06 0.79 1.57 0.51 3.15 2.24 0.98 -5 -11 0.88 WNMG 332
-17090-06 0.98 1.57 0.67 3.54 2.68 1.26 -5 -12 1.32 WNMG 332
-22110-06 1.26 1.57 0.87 4.33 3.50 1.57 -5 -12 1.76 WNMG 332
C4-PWLNL -13080-06 0.79 1.57 0.51 3.15 2.24 0.98 -5 -11 0.88 WNMG 332
-17090-06 0.98 1.57 0.67 3.54 2.68 1.26 -5 -12 1.32 WNMG 332
-22110-06 1.26 1.57 0.87 4.33 3.50 1.57 -5 -12 1.76 WNMG 332
1/2 C4-PWLNR -22110-08 1.26 1.57 0.87 4.33 3.50 1.57 -5 -11 1.76 WNMG 432
-27120-08 1.57 1.57 1.06 4.72 3.94 1.97 -5 -8 1.98 WNMG 432
C4-PWLNL -22110-08 1.26 1.57 0.87 4.33 3.50 1.57 -5 -11 1.76 WNMG 432
-27120-08 1.57 1.57 1.06 4.72 3.94 1.97 -5 -8 1.98 WNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
348
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts WNGP, WNMA, WNMG, and WNMP
PWLNR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
95°
3/8 C5-PWLNR -13080-06 0.79 1.97 0.51 3.15 2.2 0.98 -5 -11 1.32 WNMG 332
-17090-06 0.98 1.97 0.67 3.54 2.64 1.26 -5 -12 1.32 WNMG 332
-22110-06 1.26 1.97 0.87 4.33 3.46 1.57 -5 -12 2.20 WNMG 332
C5-PWLNL -13080-06 0.79 1.97 0.51 3.15 2.2 0.98 -5 -11 1.32 WNMG 332
-17090-06 0.98 1.97 0.67 3.54 2.64 1.26 -5 -12 1.32 WNMG 332
-22110-06 1.26 1.97 0.87 4.33 3.46 1.57 -5 -12 2.20 WNMG 332
1/2 C5-PWLNR -22110-08 1.26 1.97 0.87 4.33 3.46 1.57 -5 -11 1.98 WNMG 432
-27140-08 1.57 1.97 1.06 5.51 4.69 1.97 -5 -11 3.08 WNMG 432
C5-PWLNL -22110-08 1.26 1.97 0.87 4.33 3.46 1.57 -5 -11 1.98 WNMG 432
-27140-08 1.57 1.97 1.06 5.51 4.69 1.97 -5 -11 3.08 WNMG 432
C6-PWLNR -27140-08 1.57 2.48 1.06 5.51 4.53 1.97 -5 -8 3.08 WNMG 432
-35175-08 1.97 2.48 1.38 6.89 5.98 2.48 -5 -10 3.52 WNMG 432
C6-PWLNL -27140-08 1.57 2.48 1.06 5.51 4.53 1.97 -5 -8 3.08 WNMG 432
-35175-08 1.97 2.48 1.38 6.89 5.98 2.48 -5 -10 3.52 WNMG 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
349
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts CCMT, CCMW and CCGW
SCLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
95°
3/8 C3-SCLCR -11065-09 0.63 1.26 0.43 2.56 1.89 0.79 0 -12 0.44 CCMT 32.52
-13075-09 0.79 1.26 0.51 2.95 2.32 0.98 0 -8 0.44 CCMT 32.52
-17090-09 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 CCMT 32.52
C3-SCLCL -11065-09 0.63 1.26 0.43 2.56 1.89 0.79 0 -12 0.44 CCMT 32.52
-13075-09 0.79 1.26 0.51 2.95 2.32 0.98 0 -8 0.44 CCMT 32.52
-17090-09 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 CCMT 32.52
1/2 C3-SCLCR -17090-12 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 CCMT 432
-22064-12 1.26 1.26 0.87 2.52 1.93 1.57 0 -10 0.66 CCMT 432
-22096-12 1.26 1.26 0.87 3.78 3.19 1.57 0 -10 1.10 CCMT 432
C3-SCLCL -17090-12 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 CCMT 432
-22064-12 1.26 1.26 0.87 2.52 1.93 1.57 0 -10 0.66 CCMT 432
-22096-12 1.26 1.26 0.87 3.78 3.19 1.57 0 -10 1.10 CCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
350
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts CCMT, CCMW and CCGW
SCLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
95°
3/8 C4-SCLCR -11070-09 0.63 1.57 0.43 2.76 1.85 0.79 0 -12 1.10 CCMT 32.52
-13080-09 0.79 1.57 0.51 3.15 2.24 0.98 0 -8 0.88 CCMT 32.52
-17090-09 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.10 CCMT 32.52
-27080-09 1.57 1.57 1.06 3.15 2.36 1.97 0 -6 1.76 CCMT 32.52
C4-SCLCL -11070-09 0.63 1.57 0.43 2.76 1.85 0.79 0 -12 0.66 CCMT 32.52
-13080-09 0.79 1.57 0.51 3.15 2.24 0.98 0 -8 1.10 CCMT 32.52
-17090-09 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.32 CCMT 32.52
-27080-09 1.57 1.57 1.06 3.15 2.36 1.97 0 -6 1.76 CCMT 32.52
1/2 C4-SCLCR -17090-12 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.10 CCMT 432
-22110-12 1.26 1.57 0.87 4.33 3.50 1.57 0 -10 1.10 CCMT 432
-27080-12 1.57 1.57 1.06 3.15 2.36 1.97 0 -8 1.32 CCMT 432
C4-SCLCL -17090-12 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.76 CCMT 432
-22110-12 1.26 1.57 0.87 4.33 3.50 1.57 0 -10 1.76 CCMT 432
-27080-12 1.57 1.57 1.06 3.15 2.36 1.97 0 -8 1.76 CCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
351
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts CCMT, CCMW and CCGW
SCLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
95°
3/8 C5-SCLCR -11070-09 0.63 1.97 0.43 2.76 1.81 0.79 0 -12 1.10 CCMT 32.52
-13080-09 0.79 1.97 0.51 3.15 2.20 0.98 0 -8 1.32 CCMT 32.52
-17090-09 0.98 1.97 0.67 3.54 2.64 1.26 0 -6 1.54 CCMT 32.52
-35100-09 1.97 1.97 1.38 3.94 3.15 2.48 0 -4 3.52 CCMT 32.52
C5-SCLCL -11070-09 0.63 1.97 0.43 2.76 1.81 0.79 0 -12 1.10 CCMT 32.52
-13080-09 0.79 1.97 0.51 3.15 2.20 0.98 0 -8 1.32 CCMT 32.52
-17090-09 0.98 1.97 0.67 3.54 2.64 1.26 0 -6 1.54 CCMT 32.52
-35100-09 1.97 1.97 1.38 3.94 3.15 2.48 0 -4 3.74 CCMT 32.52
1/2 C5-SCLCR -17090-12 0.98 1.97 0.67 3.54 2.64 1.26 0 -6 1.54 CCMT 432
-22110-12 1.26 1.97 0.87 4.33 3.46 1.57 0 -10 2.20 CCMT 432
-27140-12 1.57 1.97 1.06 5.51 4.69 1.97 0 -8 3.52 CCMT 432
-35100-12 1.97 1.97 1.38 3.94 3.15 2.48 0 -6 3.52 CCMT 432
C5-SCLCL -17090-12 0.98 1.97 0.67 3.54 2.64 1.26 0 -6 1.54 CCMT 432
-22110-12 1.26 1.97 0.87 4.33 3.46 1.57 0 -10 2.20 CCMT 432
-27140-12 1.57 1.97 1.06 5.51 4.69 1.97 0 -8 3.52 CCMT 432
-35100-12 1.97 1.97 1.38 3.94 3.15 2.48 0 -6 3.74 CCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
352
Seco Capto
353
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts DCMT and DCMW
SDUCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
93°
1/4 C3-SDUCR -11065-07 0.63 1.26 0.43 2.56 1.89 0.79 0 -8 0.44 DCMT 21.51
C3-SDUCL -11065-07 0.63 1.26 0.43 2.56 1.89 0.79 0 -8 0.44 DCMT 21.51
3/8 C3-SDUCR -13075-11 0.79 1.26 0.51 2.95 2.32 0.98 0 -8 0.44 DCMT 32.52
-17090-11 0.98 1.26 0.67 3.54 2.32 1.26 0 -6 0.66 DCMT 32.52
-22064-11 1.26 1.26 0.87 2.52 1.93 1.57 0 -6 0.66 DCMT 32.52
-22096-11 1.26 1.26 0.87 3.78 3.23 1.57 0 -6 1.10 DCMT 32.52
C3-SDUCL -13075-11 0.79 1.26 0.51 2.95 2.32 0.98 0 -8 0.44 DCMT 32.52
-17090-11 0.98 1.26 0.67 3.54 2.32 1.26 0 -6 0.66 DCMT 32.52
-22064-11 1.26 1.26 0.87 2.52 1.93 1.57 0 -6 0.66 DCMT 32.52
-22096-11 1.26 1.26 0.87 3.78 3.23 1.57 0 -6 1.10 DCMT 32.52
1/4 C4-SDUCR -11070-07 0.63 1.57 0.43 2.76 1.85 0.79 0 -8 1.10 DCMT 21.51
C4-SDUCL -11070-07 0.63 1.57 0.43 2.76 1.85 0.79 0 -8 1.10 DCMT 21.51
3/8 C4-SDUCR -13080-11 0.79 1.57 0.51 3.15 2.24 0.98 0 -8 1.10 DCMT 32.52
-17090-11 0.98 1.57 0.67 3.57 2.68 1.26 0 -6 1.10 DCMT 32.52
-22110-11 1.26 1.57 0.87 4.33 3.50 1.57 0 -6 1.76 DCMT 32.52
-27080-11 1.57 1.57 1.06 3.15 2.36 1.97 0 -6 1.76 DCMT 32.52
C4-SDUCL -13080-11 0.79 1.57 0.51 3.15 2.24 0.98 0 -8 1.10 DCMT 32.52
-17090-11 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.10 DCMT 32.52
-22110-11 1.26 1.57 0.87 4.33 3.50 1.57 0 -6 1.76 DCMT 32.52
-27080-11 1.57 1.57 1.06 3.15 2.36 1.97 0 -6 1.76 DCMT 32.52
Toolholder/
Insert
dimension
11065-07 - - - C02506 T07-2
11070-07 - - - C02506 T07-2
13075-11 - - - C03508 T15-2
13080-11 - - - C03508 T15-2
17090-11 - - - C03510 T15-2
22064-11 126.19-620 CA3507 3.5 SMS795 C03512 T15-2
22096-11 126.19-620 CA3507 3.5 SMS795 C03512 T15-2
22110-11 126.19-620 CA3507 3.5 SMS795 C03512 T15-2
27080-11 126.19-620 CA3507 3.5 SMS795 C03512 T15-2
Please check availability in current price and stock-list *To be ordered separately
354
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts DCMT and DCMW
SDUCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
93°
1/4 C5-SDUCR -11070-07 0.63 1.97 0.43 2.76 1.81 0.79 0 -8 1.10 DCMT 21.51
C5-SDUCL -11070-07 0.63 1.97 0.43 2.76 1.81 0.79 0 -8 1.10 DCMT 21.51
3/8 C5-SDUCR -13080-11 0.79 1.97 0.51 3.15 2.20 0.98 0 -8 1.32 DCMT 32.52
-17090-11 0.98 1.97 0.67 3.54 2.60 1.26 0 -6 1.54 DCMT 32.52
-22110-11 1.26 1.97 0.87 4.33 3.46 1.57 0 -6 2.20 DCMT 32.52
-35100-11 1.97 1.97 1.38 3.94 3.15 2.48 0 -4 3.52 DCMT 32.52
C5-SDUCL -13080-11 0.79 1.97 0.51 3.15 2.20 0.98 0 -8 1.32 DCMT 32.52
-17090-11 0.98 1.97 0.67 3.54 2.60 1.26 0 -6 1.54 DCMT 32.52
-22110-11 1.26 1.97 0.87 4.33 3.46 1.57 0 -6 2.20 DCMT 32.52
-35100-11 1.97 1.97 1.38 3.94 3.15 2.48 0 -4 3.52 DCMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
355
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts DCMT and DCMW
SDUCR/L...X
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 l2 Dmmin γo° γp° insert
93°
1/4 C3-SDUCR -13070-07X 0.63 1.26 0.51 2.76 2.09 3.18 0.87 0 -6 0.44 DCMT 21.51
-15080-07X 0.79 1.26 0.59 3.15 2.52 3.58 1.06 0 -3 0.66 DCMT 21.51
C3-SDUCL -13070-07X 0.63 1.26 0.51 2.76 2.09 3.18 0.87 0 -6 0.44 DCMT 21.51
-15080-07X 0.79 1.26 0.59 3.15 2.52 3.58 1.06 0 -3 0.66 DCMT 21.51
C4-SDUCR -13070-07X 0.63 1.57 0.51 2.76 1.85 3.18 0.86 0 -6 0.88 DCMT 21.51
-15080-07X 0.79 1.57 0.59 3.15 2.24 3.60 1.06 0 -3 1.10 DCMT 21.51
-18090-07X 0.98 1.57 0.70 3.54 2.68 4.00 1.26 0 -3 1.54 DCMT 21.51
C4-SDUCL -13070-07X 0.63 1.57 0.51 2.76 1.85 3.18 0.87 0 -6 0.88 DCMT 21.51
-15080-07X 0.79 1.57 0.59 3.15 2.24 3.60 1.06 0 -3 1.10 DCMT 21.51
-18090-07X 0.98 1.57 0.71 3.54 2.68 4.00 1.26 0 -3 1.54 DCMT 21.51
C5-SDUCR -15080-07X 0.79 1.97 0.59 3.15 2.20 3.60 1.06 0 -3 1.32 DCMT 21.51
-18090-07X 0.98 1.97 0.71 3.54 2.64 4.00 1.26 0 -3 1.76 DCMT 21.51
C5-SDUCL -15080-07X 0.79 1.97 0.59 3.15 2.20 3.60 1.06 0 -3 1.32 DCMT 21.51
-18090-07X 0.98 1.97 0.71 3.54 2.64 4.00 1.26 0 -3 1.76 DCMT 21.51
Toolholder/
Insert
dimension
356
Seco Capto
357
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts SCMT and SCMW
SSKCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
75°
3/8 C3-SSKCR -11065-09 0.63 1.26 0.43 2.56 1.89 0.79 0 -11 0.44 SCMT 32.52
-13075-09 0.79 1.26 0.51 2.95 2.32 0.98 0 -6 0.44 SCMT 32.52
-17090-09 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 SCMT 32.52
C3-SSKCL -11065-09 0.63 1.26 0.43 2.56 1.89 0.79 0 -11 0.44 SCMT 32.52
-13075-09 0.79 1.26 0.51 2.95 2.32 0.98 0 -6 0.44 SCMT 32.52
-17090-09 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 SCMT 32.52
1/2 C3-SSKCR -22064-12 1.26 1.26 0.87 2.52 1.93 1.57 0 -10 0.66 SCMT 432
C3-SSKCL -22064-12 1.26 1.26 0.87 2.52 1.93 1.57 0 -10 0.66 SCMT 432
3/8 C4-SSKCR -13080-09 0.79 1.57 0.51 3.15 2.24 0.98 0 -6 1.10 SCMT 32.52
-17090-09 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.32 SCMT 32.52
C4-SSKCL -13080-09 0.79 1.57 0.51 3.15 2.24 0.98 0 -6 1.10 SCMT 32.52
-17090-09 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.32 SCMT 32.52
1/2 C4-SSKCR -22110-12 1.26 1.57 0.87 4.33 3.50 1.57 0 -10 1.76 SCMT 432
-27080-12 1.57 1.57 1.06 3.15 2.36 1.97 0 -8 1.98 SCMT 432
C4-SSKCL -22110-12 1.26 1.57 0.87 4.33 3.50 1.57 0 -10 1.76 SCMT 432
-27080-12 1.57 1.57 1.06 3.15 2.36 1.97 0 -8 1.98 SCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
358
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts SCMT and SCMW
SSKCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
75°
3/8 C5-SSKCR -13080-09 0.79 1.97 0.51 3.15 2.20 0.98 0 -6 1.32 SCMT 32.52
C5-SSKCL -13080-09 0.79 1.97 0.51 3.15 2.20 0.98 0 -6 1.32 SCMT 32.52
1/2 C5-SSKCR -17090-12 0.98 1.97 0.67 3.54 2.64 1.26 0 -10 1.54 SCMT 432
-22110-12 1.26 1.97 0.87 4.33 3.46 1.57 0 -10 2.20 SCMT 432
-35100-12 1.97 1.97 1.38 3.94 3.15 2.48 0 -6 3.52 SCMT 432
C5-SSKCL -17090-12 0.98 1.97 0.67 3.54 2.64 1.26 0 -10 1.54 SCMT 432
-22110-12 1.26 1.97 0.87 4.33 3.46 1.57 0 -10 2.20 SCMT 432
-35100-12 1.97 1.97 1.38 3.94 3.15 2.48 0 -6 3.52 SCMT 432
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
359
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts TCMT and TCMW
STFCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
90°
1/4 C3-STFCR -11065-11 0.63 1.26 0.43 2.56 1.89 0.79 0 -4 0.44 TCMT 21.51
-13075-11 0.79 1.26 0.51 2.95 2.32 0.98 0 -3 0.44 TCMT 21.51
C3-STFCL -11065-11 0.63 1.26 0.43 2.56 1.89 0.79 0 -4 0.44 TCMT 21.51
-13075-11 0.79 1.26 0.51 2.95 2.32 0.98 0 -3 0.44 TCMT 21.51
3/8 C3-STFCR -17090-16 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 TCMT 32.52
C3-STFCL -17090-16 0.98 1.26 0.67 3.54 2.91 1.26 0 -6 0.66 TCMT 32.52
1/4 C4-STFCR -11070-11 0.63 1.57 0.43 2.76 1.85 0.79 0 -4 1.10 TCMT 21.51
-13080-11 0.79 1.57 0.51 3.15 2.24 0.98 0 -3 1.10 TCMT 21.51
C4-STFCL -11070-11 0.63 1.57 0.43 2.76 1.85 0.79 0 -4 1.10 TCMT 21.51
-13080-11 0.79 1.57 0.51 3.15 2.24 0.98 0 -3 1.10 TCMT 21.51
3/8 C4-STFCR -17090-16 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.32 TCMT 32.52
-22110-16 1.26 1.57 0.87 4.33 3.50 1.57 0 -10 1.76 TCMT 32.52
C4-STFCL -17090-16 0.98 1.57 0.67 3.54 2.68 1.26 0 -6 1.32 TCMT 32.52
-22110-16 1.26 1.57 0.87 4.33 3.50 1.57 0 -10 1.76 TCMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
360
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts TCMT and TCMW
STFCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
90°
1/4 C5-STFCR -11070-11 0.63 1.97 0.43 2.76 1.81 0.79 0 -4 1.10 TCMT 21.51
-13080-11 0.79 1.97 0.51 3.15 2.20 0.98 0 -3 1.32 TCMT 21.51
C5-STFCL -11070-11 0.63 1.97 0.43 2.76 1.81 0.79 0 -4 1.10 TCMT 21.51
-13080-11 0.79 1.97 0.51 3.15 2.20 0.98 0 -3 1.32 TCMT 21.51
3/8 C5-STFCR -17090-16 0.98 1.97 0.67 3.54 2.64 1.26 0 -6 1.54 TCMT 32.52
-22110-16 1.26 1.97 0.87 4.33 3.46 1.57 0 -10 2.20 TCMT 32.52
C5-STFCL -17090-16 0.98 1.97 0.67 3.54 2.64 1.26 0 -6 1.54 TCMT 32.52
-22110-16 1.26 1.97 0.87 4.33 3.46 1.57 0 -10 2.20 TCMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
361
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts VBGW, VBMT
SVQBR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
107°30'
1/4 C3-SVQBR -13070-11 0.63 1.26 0.51 2.76 2.09 0.87 0 -7 0.44 VBMT 21.51
-15080-11 0.79 1.26 0.59 3.15 2.52 1.06 0 -5 0.66 VBMT 21.51
C3-SVQBL -13070-11 0.63 1.26 0.51 2.76 2.09 0.87 0 -7 0.44 VBMT 21.51
-15080-11 0.79 1.26 0.59 3.15 2.52 1.06 0 -5 0.66 VBMT 21.51
3/8 C3-SVQBR -18090-16 0.98 1.26 0.71 3.54 2.91 1.26 0 -6 0.88 VBMT 32.52
-22064-16 1.26 1.26 0.87 2.52 1.93 1.57 0 -8 0.88 VBMT 32.52
-22096-16 1.26 1.26 0.87 3.78 3.19 1.57 0 -8 1.32 VBMT 32.52
C3-SVQBL -18090-16 0.98 1.26 0.71 3.54 2.91 1.26 0 -6 0.88 VBMT 32.52
-22064-16 1.26 1.26 0.87 2.52 1.93 1.57 0 -8 0.88 VBMT 32.52
-22096-16 1.26 1.26 0.87 3.78 3.19 1.57 0 -8 1.32 VBMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
362
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts VBGW, VBMT
SVQBR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
107°30'
1/4 C4-SVQBR -13070-11 0.63 1.57 0.51 2.76 1.85 0.98 0 -7 0.88 VBMT 21.51
-15080-11 0.79 1.57 0.59 3.15 2.28 1.06 0 -5 1.10 VBMT 21.51
C4-SVQBL -13070-11 0.63 1.57 0.51 2.76 1.85 0.98 0 -7 0.88 VBMT 21.51
-15080-11 0.79 1.57 0.59 3.15 2.28 1.06 0 -5 1.10 VBMT 21.51
3/8 C4-SVQBR -18090-16 0.98 1.57 0.71 3.54 2.68 1.30 0 -6 1.54 VBMT 32.52
-22110-16 1.26 1.57 0.87 4.33 3.50 1.57 0 -8 1.76 VBMT 32.52
-27080-16 1.57 1.57 1.06 3.15 2.36 1.97 0 -8 1.98 VBMT 32.52
-27120-16 1.57 1.57 1.06 4.72 3.94 1.97 0 -8 3.08 VBMT 32.52
C4-SVQBL -18090-16 0.98 1.57 0.71 3.54 2.68 1.30 0 -6 1.54 VBMT 32.52
-22110-16 1.26 1.57 0.87 4.33 3.50 1.57 0 -8 1.76 VBMT 32.52
-27080-16 1.57 1.57 1.06 3.15 2.36 1.97 0 -8 1.98 VBMT 32.52
-27120-16 1.57 1.57 1.06 4.72 3.94 1.97 0 -8 3.08 VBMT 32.52
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
363
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts VBGW, VBMT
SVQBR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
107°30'
1/4 C5-SVQBR -15080-11 0.79 1.97 0.59 3.15 2.24 1.06 0 -5 1.32 VBMT 21.51
C5-SVQBL -15080-11 0.79 1.97 0.59 3.15 2.24 1.06 0 -5 1.32 VBMT 21.51
3/8 C5-SVQBR -18090-16 0.98 1.97 0.71 3.54 2.64 1.30 0 -6 1.54 VBMT 32.52
-22110-16 1.26 1.97 0.87 4.33 3.46 1.57 0 -8 2.20 VBMT 32.52
-27140-16 1.57 1.97 1.06 5.51 4.69 1.97 0 -8 3.52 VBMT 32.52
-35100-16 1.97 1.97 1.38 3.94 3.15 2.48 0 -7 3.74 VBMT 32.52
-35150-16 1.97 1.97 1.38 5.91 5.12 2.48 0 -7 5.28 VBMT 32.52
C5-SVQBL -18090-16 0.98 1.97 0.71 3.54 2.64 1.30 0 -6 1.54 VBMT 32.52
-22110-16 1.26 1.97 0.87 4.33 3.46 1.57 0 -8 2.20 VBMT 32.52
-27140-16 1.57 1.97 1.06 5.51 4.69 1.97 0 -8 3.52 VBMT 32.52
-35100-16 1.97 1.97 1.38 3.94 3.15 2.48 0 -7 3.74 VBMT 32.52
-35150-16 1.97 1.97 1.38 5.91 5.12 2.48 0 -7 5.28 VBMT 32.52
C6-SVQBR -22120-16 1.26 2.48 0.87 4.72 3.70 1.57 0 -8 3.74 VBMT 32.52
-27145-16 1.57 2.48 1.06 5.71 4.72 1.97 0 -8 4.62 VBMT 32.52
-35175-16 1.97 2.48 1.38 6.89 5.98 2.48 0 -8 7.04 VBMT 32.52
C6-SVQBL -22120-16 1.26 2.48 0.87 4.72 3.70 1.57 0 -8 3.74 VBMT 32.52
-27145-16 1.57 2.48 1.06 5.71 4.72 1.97 0 -8 4.62 VBMT 32.52
-35175-16 1.97 2.48 1.38 6.89 5.98 2.48 0 -8 7.04 VBMT 32.52
Toolholder/
Insert
dimension
364
Seco Capto, Turning - Toolholders, internal
Toolholders for inserts WCMT
SWLCR/L
Dimensions in inch
Insert Gage
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin γo° γp° insert
95°
3/8 C4-SWLCR -11070-06 0.63 1.57 0.43 2.76 1.85 0.79 0 -5 0.88 WCMT 32.52
-13080-06 0.79 1.57 0.51 3.15 2.24 0.98 0 -5 1.10 WCMT 32.52
C4-SWLCL -11070-06 0.63 1.57 0.43 2.76 1.85 0.79 0 -5 0.88 WCMT 32.52
-13080-06 0.79 1.57 0.51 3.15 2.24 0.98 0 -5 1.10 WCMT 32.52
C5-SWLCR -11070-06 0.63 1.97 0.43 2.76 1.81 0.79 0 -5 1.32 WCMT 32.52
-13080-06 0.79 1.97 0.51 3.15 2.20 0.98 0 -5 1.54 WCMT 32.52
C5-SWLCL -11070-06 0.63 1.97 0.43 2.76 1.81 0.79 0 -5 1.32 WCMT 32.52
-13080-06 0.79 1.97 0.51 3.15 2.20 0.98 0 -5 1.54 WCMT 32.52
Toolholder/
Insert
dimension
365
Seco Capto, MDT - Toolholders, external
Toolholders for inserts LCGN, LCMF and LCMR
CFIR/L
Dimensions in inch
Toolholder/
Insert
dimension
366
Seco Capto, MDT - Toolholders, external
Toolholders for inserts LCGN, LCMF and LCMR
CFIR/L
Dimensions in inch
*Max depth of cut for: LCMF16.. = .550 in., LCMF30.. = 1.100 in.
Spare Parts, Parts included in delivery
Locking screw/ Key
Toolholder/
Insert
dimension
367
Seco Capto, MDT - Toolholders, internal
Toolholders for inserts LCGN, LCMF and LCMR
CGGR/L
Dimensions in inch
4 C4-CGGR-27090-04 1.57 1.57 1.06 3.54 2.76 0.31 1.77 1.54 LC..1604
C4-CGGL-27090-04 1.57 1.57 1.06 3.54 2.76 0.31 1.77 1.54 LC..1604
3 C5-CGGR-25090-03 1.57 1.97 0.98 3.54 2.76 0.24 1.77 1.76 LC..1603
C5-CGGL-25090-03 1.57 1.97 0.98 3.54 2.76 0.24 1.77 1.76 LC..1603
4 C5-CGGR-27090-04 1.57 1.97 1.06 3.54 2.76 0.31 1.77 1.76 LC..1604
C5-CGGL-27090-04 1.57 1.97 1.06 3.54 2.76 0.31 1.77 1.76 LC..1604
3 C6-CGGR-25095-03 1.57 2.48 0.98 3.74 2.87 0.24 1.77 2.86 LC..1603
C6-CGGL-25095-03 1.57 2.48 0.98 3.74 2.87 0.24 1.77 2.86 LC..1603
4 C6-CGGR-27095-04 1.57 2.48 1.06 3.74 2.87 0.31 1.77 2.86 LC..1604
C6-CGGL-27095-04 1.57 2.48 1.06 3.74 2.87 0.31 1.77 2.86 LC..1604
Toolholder/
Insert
dimension
368
Seco Capto, MDT
369
Seco Capto, Threading - Toolholders, external
Toolholders for S-inserts
CER/L
Dimensions in inch
Insert
Application I.C. Part No. dmm f1 l1 Dm2
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
370
Seco Capto, Threading - Toolholders, external
Toolholders for S-inserts
CER/L..C
Dimensions in inch
Insert
Application I.C. Part No. dmm f1 l1 Dm2
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
371
Seco Capto, Threading - Toolholders, internal
Toolholders for S-inserts
SNR/L CNR/L
Dimensions in inch
Insert
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin
3/8 C4-SNR -10060-16 0.63 1.57 0.39 2.36 1.46 0.75 0.66 16..
C4-CNR -14060-16 0.79 1.57 0.54 2.36 1.42 0.94 0.66 16..
-17070-16 0.98 1.57 0.64 2.76 1.89 1.14 0.88 16..
-20090-16 1.26 1.57 0.78 3.54 2.72 1.42 1.32 16..
C4-CNL -14060-16 0.79 1.57 0.54 2.36 1.42 0.94 0.66 16..
-17070-16 0.98 1.57 0.64 2.76 1.89 1.14 0.88 16..
-20090-16 1.26 1.57 0.78 3.54 2.72 1.42 1.32 16..
1/2 C4-CNR -22090-22 1.26 1.57 0.84 3.54 2.72 1.50 1.32 22..
C4-CNL -22090-22 1.26 1.57 0.84 3.54 2.72 1.50 1.32 22..
3/8 C5-CNR -14060-16 0.79 1.97 0.54 2.36 1.42 0.94 1.10 16..
-17070-16 0.98 1.97 0.64 2.75 1.85 1.14 1.32 16..
-20090-16 1.26 1.97 0.78 3.54 2.68 1.42 1.76 16..
C5-CNL -14060-16 0.78 1.97 0.54 2.36 1.42 0.94 1.10 16..
-17070-16 0.98 1.97 0.64 2.75 1.85 1.14 1.32 16..
-20090-16 1.26 1.97 0.78 3.54 2.68 1.42 1.76 16..
1/2 C5-CNR -18070-22 0.98 1.97 0.70 2.76 1.85 1.18 1.32 22..
-22090-22 1.26 1.97 0.84 3.54 2.68 1.50 1.98 22..
C5-CNL -18070-22 0.98 1.97 0.70 2.76 1.85 1.18 1.32 22..
-22090-22 1.26 1.97 0.84 3.54 2.68 1.50 1.98 22..
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
372
Seco Capto, Threading - Toolholders, internal
Toolholders for S-inserts
CNR/L
Dimensions in inch
Insert
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin
3/8 C6-CNR -17075-16 0.98 2.48 0.64 2.95 2.09 1.14 2.42 16..
-20090-16 1.26 2.48 0.78 3.54 2.68 1.42 2.42 16..
-24105-16 1.57 2.48 0.94 4.13 3.15 1.73 3.30 16..
C6-CNL -17075-16 0.98 2.48 0.64 2.95 2.09 1.14 2.42 16..
-20090-16 1.26 2.48 0.78 3.54 2.68 1.42 2.42 16..
-24105-16 1.57 2.48 0.94 4.13 3.15 1.73 3.30 16..
1/2 C6-CNR -18075-22 0.98 2.48 0.70 2.95 2.09 1.18 2.42 22..
-22090-22 1.26 2.48 0.84 3.54 2.68 1.50 2.64 22..
-26105-22 1.57 2.48 1.00 4.13 3.15 1.81 3.30 22..
C6-CNL -18075-22 0.98 2.48 0.70 2.95 2.09 1.18 2.42 22..
-22090-22 1.26 2.48 0.84 3.54 2.68 1.50 2.64 22..
-26105-22 1.57 2.48 1.00 4.13 3.15 1.81 3.30 22..
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
373
Seco Capto, Threading - Toolholders, internal
Toolholders for S-inserts
CNR/L..C
Dimensions in inch
Insert
Application I.C. Part No. D1 dmm f1 l1 l3 Dmmin
3/8 C4-CNR -14060-16C 0.79 1.57 0.54 2.36 1.42 0.94 0.66 16..
C4-CNL -14060-16C 0.79 1.57 0.54 2.36 1.42 0.94 0.66 16..
C5-CNR -17070-16C 0.98 1.97 0.64 2.76 1.85 1.14 1.32 16..
-20090-16C 1.26 1.97 0.78 3.54 2.68 1.42 1.76 16..
C5-CNL -17070-16C 0.98 1.97 0.64 2.76 1.85 1.14 1.32 16..
-20090-16C 1.26 1.97 0.78 3.54 2.68 1.42 1.76 16..
1/2 C5-CNR -18070-22C 0.98 1.96 7.00 2.75 1.85 1.18 1.32 22..
C5-CNL -18070-22C
3/8 C6-CNR -20090-16C 1.26 2.48 0.78 3.54 2.68 1.42 1.76 16..
-24105-16C 1.57 2.48 0.94 4.13 3.15 1.73 3.30 16..
C6-CNL -20090-16C 1.26 2.48 0.78 3.54 2.68 1.42 1.76 16..
-24105-16C 1.57 2.48 0.94 4.13 3.15 1.73 3.30 16..
1/2 C6-CNR -22090-22C 1.26 2.48 0.84 3.54 2.68 1.50 2.64 22..
-26105-22C 1.57 2.48 1.00 4.13 3.15 1.81 3.30 22..
C6-CNL -22090-22C 1.26 2.48 0.84 3.54 2.68 1.50 2.64 22..
-26105-22C 1.57 2.48 1.00 4.13 3.15 1.81 3.30 22..
Toolholder/
Insert
dimension
Please check availability in current price and stock-list *To be ordered separately
374
Seco Capto, Threading
375
Seco Capto - Adapters for solid boring bars
Inch and metric
Dimensions in inch
inch
C4-131 -00050-250 1.58 .250 1.42 1.18 1.07 1.97 .197 .630 -
-00050-375 1.58 .375 1.42 1.18 1.13 1.97 .197 .354 -
-00050-500 1.58 .500 1.42 .95 1.13 1.97 .236 .472 -
-00050-625 1.58 .625 1.42 .71 1.13 1.97 .315 .591 -
-00060-750 1.58 .750 1.42 .83 1.42 2.36 .315 .630 -
C5-131 -00060-250 1.97 .250 1.42 1.58 1.58 2.36 .197 .630 -
-00060-500 1.97 .500 1.42 1.34 1.58 2.36 .236 .472 -
-00060-625 1.97 .625 1.42 1.10 1.58 2.36 .315 .630 -
-00060-750 1.97 .750 1.42 .83 1.58 2.36 .315 .630 -
-00070-1000 1.97 1.000 2.13 .79 1.97 2.76 .492 .984 -
C6-131 -00065-750 2.48 .750 1.42 1.27 1.54 2.66 .417 .630 -
-00075-1000 2.48 1.000 2.13 .95 2.04 2.95 .472 .984 -
metric (mm)
C3-131 -00035-10 32 10 36 20 20 35 10 5 -
-00040-12 32 12 36 24 24 40 12 6 -
C4-131 -00040-10 40 10 36 20 19 40 10 5 -
-00045-12 40 12 36 24 24 45 12 6 -
-00050-16 40 16 36 32 29 50 16 8 -
C5-131 -00045-10 50 10 36 20 21 45 10 5 -
-00045-12 50 12 36 24 22,5 45 12 6 -
-00055-16 50 16 36 32 31 55 16 8 -
Toolholder/
Insert
dimension
inch 1/2-20UNFx.5SSS -
metric
-10/ -12 951C0610 3 SMS795
-16 951C0810 4 SMS795
Please check availability in current price and stock-list
376
Seco Capto - Extension Adapters
Dimensions in inch
Basic
Holder/
Part No. Adaptor dmm dmt l1
377
Blanks For Production Of Cutting Tools
NR (non rotating)
Dimensions in inch
378
Introduction
Seco Capto Quick Change Tooling System
Seco Capto is a modular tooling system for quicker set up and
indexing of cutting edges in turning lathes.
Why Seco Capto?
Quick. Thanks to the quick tool change, at both set up and
indexing of the cutting edge, Seco Capto increases the
available productive time in the machine.
Flexible. Same toolholder can be used in all machines. Limits
the tool stock needed.
Rigid. Increased productivity because the tooling system
does not limit the feed capacity. Better surface finish and tool
life gives more output and even higher quality.
Modular. Build the tool you need with extension adapters.
Reduces tool inventory.
Accurate. The tapered polygon produces a joint which is
extremely strong with regard to both bending and twisting. All these factors ensure a repeatability within .00008”. Correct
The design of the polygon permits symmetrical distribution of dimensions on the first workpiece. More productive time in
forces, the coupling is also self centering. Clamping against the machine.
the flange location face ensures repeatable positional
accuracy. A large contact surface ensures low surface All toolholders have through holes for coolant, and are
pressure prepared for electronic data carriers.
Clamping Units
Seco Capto manual clamping units are locked either with a
drawbar or with a screw from the back.
The clamping units operate as shown below:
Clamping
segments
When the drawbar is pushed forward, the clamping segments When the drawbar is pulled back, the diameter of the clamping
move towards the centerline. The diameter decreases and the segments expand and the cutting unit is pulled into the
clamping segments are loosened from the cutting unit. The clamped (working) position.
drawbar also pushes the cutting unit out from the joint.
The manual clamping units are available in different versions: Seco Capto is produced under license from Sandvik Coromant
[ With VDI-shaft, straight or angled, for direct mounting on and is fully interchangeable with Coromant Captoä.
the VDI-turret.
[ Shank type for mounting on a standard turret, to use with
external toolholders.
[ Cylindrical type for mounting on a standard turret, to use
with internal toolholders.
Version for special applications.
To select clamping units please see page 380-381.
379
How To Select Clamping Unit 2000/3000/2085
Spindle rotation: clockwise
380
How To Select A VDI-Clamping Unit
Spindle rotation: clockwise
381
Machine Adapted Clamping Units
Code key for SECO Captoâ machine adapted clamping units
RC = Right E = External
LC = Left I = Internal
NC = Neutral
Example: Gauge line in millimeters from ref- Gauge line in millimeters from
SQT250 = Super Quick Turn 250 erence point to center line of SECO reference point to face of SECO Cap-
Capto coupling to coupling
7 Version 8 Configuration
382
Machine Adapted Clamping Units
Clamping units for Mazak CNC lathes – Manually operated
Dimensions, Inch
Coup-
ling
Machine Make and Model Size Part No. b2 h2 l1x l1z l2z l2 l21 Type
C5-R/LCE-SQT30-052130M 6.850 3.937 5.118 2.047 1
C5-R/LCE-SQT30-100130M SS 7.756 3.937 5.118 3.937 2
SQT 28, 30
C5 C5-R/LCE-SQT30-000130M DT 8.504 3.937 5.118 2.047 3.937 3
12 Station, 12 Position
C5-R/LCI-SQT30-175073M 8.150 3.937 6.890 2.874 4.252 1.378 4
C5-R/LCI-SQT30-180043M SS 8.346 3.937 7.087 1.692 4.055 1.378 5
C4-R/LCE-SQT10-045090M 5.945 2.992 3.543 1.772 1
SQT 200M, 250M
C4-R/LCE-SQT10-063090M SS 5.394 2.992 3.543 2.480 2
16 Station, 16 Position
C4 C4-R/LCI-SQT10-000090M DT 6.142 2.992 3.543 1.772 2.480 3
SQT 10
12 Station, 12 Position C4-R/LCI-SQT10-110061M 5.276 2.992 4.331 2.402 3.465 1.063 4
C4-R/LCI-SQT10-110015M SS 5.276 2.992 4.331 0.591 3.465 2.874 5
C4-R/LCE-SQT250-061099M 6.662 3.307 3.898 2.402 1
C4-R/LCE-SQT250-058099M SS 5.512 3.307 3.898 2.283 2
C4 C4-R/LCE-SQT250-000099M DT 6.929 3.307 3.898 2.402 2.008 3
C4-R/LCI-SQT250-140076M 6.457 3.307 5.512 2.992 3.504 0.512 4
SQT 15, 18, 200M, 250M C4-R/LCI-SQT250-140020M SS 6.457 3.307 5.512 0.787 3.543 2.756 5
12 Station, 12 Position C5-R/LCE-SQT250-061102M 7.008 3.307 4.016 2.402 1
C5-R/LCE-SQT250-050102M SS 5.512 3.307 4.016 1.969 2
C5 C5-R/LCE-SQT250-000102M DT 6.929 3.307 4.016 2.402 2.008 3
C5-R/LCI-SQT250-140079M 6.772 3.307 5.512 3.110 4.055 0.945 4
C5-R/LCI-SQT250-140023M SS 6.772 3.307 5.512 0.906 4.055 3.150 5
Multiplex 410, 610 C4-R/LCE-MZ610-063090M 5.551 2.992 3.543 2.480 2
12 Station, 16 Station C4-R/LCI-MZ610-120030M 5.669 2.992 4.724 1.181 3.456 2.283 5
C4
Multiplex 6200Y
16 Station, 16 Position
Multiplex 6200, 6200Y, 4200 C4-R/LCE-MZ6200-063100M 5.039 3.307 3.937 2.480 2
C4
12 Station, 12 Position C4-R/LCI-MZ6200-150018M 6.850 3.307 5.906 0.709 3.465 2.756 5
Multiplex 6250, 625, 425 C5-R/LCE-MZ6200-055100M 5.394 3.307 3.937 2.165 2
12 Station, 12 Position C5-R/LCI-MZ6200-150033M 7.165 3.307 5.906 1.299 4.055 2.756 5
Multiplex 420, 620 (EXTERNAL C5
ONLY), 12 Station, 12 Position
Multiplex 420, 620 C4 C4-R/LCI-MZ620-140018M 6.457 3.307 5.512 0.709 3.465 2.756 5
12 Station, 12 Position C5 C5-R/LCI-MZ620-140033M 6.772 3.307 5.512 1.299 4.055 2.756 5
Multiplex 430, 630 C5-R/LCE-MZ630-090130M 7.283 3.937 5.118 3.543 2
C5
12 Station, 12 Position C5-R/LCI-MZ630-190040M 8.740 3.937 7.480 1.575 4.055 2.480 5
C3-R/LCE-QT10-030026M 4.645 3.740 1.024 1.181 2.953 6
C3
Quick Turn 8, 10 C3-R/LCI-QT10-025020M 1.732 3.740 0.984 0.787 2.933 7
8 Station, 8 Position C4-R/LCE-QT10-035027M 5.039 3.740 1.063 1.378 3.465 6
C4
C4-R/LCI-QT10-025033M 1.929 3.740 0.984 1.299 3.465 7
Quick Turn 15, 18, 20, 200 C4-R/LCE-QT18-035030M 6.260 4.488 1.181 1.378 3.465 6
C4
Dual Turn 20 C4-R/LCI-QT18-050025M 2.913 4.488 1.969 0.984 4.134 7
8 Station, 8 Position C5-R/LCE-QT18-045040M 3.968 4.488 1.575 1.772 4.055 6
SQT 200, 250 C5 C5-R/LCI-QT18-050028M 3.228 4.488 1.969 1.102 4.252 7
12 Station, 12 Position
Quick Turn 18, 20 C4 C4-R/LCI-QT20-050025M 2.913 4.685 1.969 0.984 3.937 7
8 Station, 8 Position C5 C5-R/LCI-QT20-050028M 3.228 4.685 1.969 1.102 4.055 7
Quick Turn 200C C4-R/LCE-QT200-035030M 5.669 3.740 1.181 1.378 3.543 6
C4
12 Station, 12 Position C4-R/LCI-QT200-030030M 2.126 3.740 1.181 1.181 3.543 7
C4 C4-R/LCE-QT30-038035M TT 5.984 5.197 1.378 1.496 4.134 8
Quick Turn 28, 30
C5-R/LCE-QT30-045038M 6.574 5.197 1.496 1.772 4.055 6
8 Station, 16 Position C5
C5-R/LCI-QT30-055032M 3.425 5.197 2.165 1.260 4.685 7
C4 C4-R/LCE-QT40-038050M TT 7.205 4.961 1.969 1.496 3.937 8
Quick Turn 35, 40
C5-R/LCE-QT40-044045M 7.765 4.961 1.772 1.732 4.055 6
12 Station, 24 Position C5
C5-R/LCI-QT40-050038M 3.228 4.961 1.969 1.496 5.433 7
C5-R/LCE-ST50-017095M 8.740 5.669 3.740 0.669 4.134 6
C5
C5-R/LCI-ST50-080045M 4.409 5.669 5.150 1.772 6.693 7
Slant Turn 50
C6-R/LCE-ST50-022100M 9.331 5.669 5.937 0.866 5.118 6
C6
C6-R/LCI-ST50-080046M 4.803 5.669 3.150 1.811 6.732 7
For price and availability, contact pricing department. Fax 810-497-5661 Ordering example: 2 pieces, C4-RCE-SQT30-052130M R = right hand
C4-LCE-SQT30-052130M L = left hand
383
Machine Adapted Clamping Units
Clamping units for Mori Seiki CNC lathes – Manually operated
Dimensions, Inch
Coupling
Machine Make and Model Size Part No. b2 h2 l1x l1z l2 Type
SL150 C4 C4-R/LCE-SL150-035037 5.433 6.465 1.457 1.378 3.583 6
CL15, CL150 C4-R/LCI-SL150-035012 2.323 3.465 1.378 0.472 3.583 7
DL15, DL151 C4-R/LCI-SL150-035060 2.323 3.465 1.378 2.362 5.472 7
C4
SL15, SL150
ZL15, ZL150
C4 C4-R/LCE-SL250-033043 5.709 4.016 1.693 1.299 3.701 6
SL200, SL250, SL300
C5 C5-R/LCE-SL250-045043 6.496 4.016 1.693 1.772 4.094 6
C4-R/LCI-SL250-040014 2.520 4.016 1.575 0.551 4.016 7
CL20, CL200, CL25 C4
C4-R/LCI-SL250-040053 2.520 4.016 1.575 2.087 5.551 7
SL20, SL25, SL200, SL250, SL300
C5-R/LCI-SL250-040014 2.835 4.016 1.575 0.551 4.016 7
ZL20, ZL200, ZL25, ZL250 C5
C5-R/LCI-SL250-040072 2.835 4.016 1.575 2.835 6.299 7
SL35 C5-R/LCI-SL35-040015 2.835 4.646 1.575 0.591 4.882 7
C5
ZL35
SL400 (static turret only) C5 C5-R/LCE-SL400-045050 8.228 5.197 1.969 1.772 3.937 6
SL45, SL400 (static turret only) C5 C5-R/LCI-SL400-050016 3.228 5.197 1.969 0.630 5.827 7
ZL45 C6 C6-R/LCI-SL400-050016 3.622 5.197 1.969 0.630 5.827 7
SL65, SL600 (static turret only), SL75 C6 C6-R/LCI-SL600-050015 3.622 5.512 1.969 0.591 6.890 7
Ordering example: 2 pieces, C4-RCE-SL150-035037 R = right hand
C4-LCE-SL150-035037 L = left hand
Coupling
Machine Make and Model Size Part No. b2 h2 l1x l1z l2 Type
LU15 C4-R/LCI-LU15-030014 2.126 4.016 1.181 0.551 3.583 7
C4
LB300
LU25 C4 C4-R/LCI-LU25-040014 2.520 4.016 1.575 0.551 3.976 7
LB15 II, LB25 II, LB15, LB25, LB400 C5-R/LCI-LU25-040014 2.835 4.016 1.575 0.551 3.976 7
C5
Cadet, Crown
LU35, LB35 II C5 C5-R/LCI-LU35-040016 2.835 4.724 1.575 0.630 5.079 7
C5 C5-R/LCI-LU45-050018 3.228 5.512 1.969 0.709 5.158 7
LU45, LB45II
C6 C6-R/LCI-LU45-050018 3.622 5.512 1.969 0.709 5.158 7
Ordering example: 2 pieces, C4-RCI-LU15-030014 R = right hand
C4-LCI-LU15-030014 L = left hand
Coupling
Machine Make and Model Size Part No. b2 h2 l1x l1z l2 Type
C4-R/LCE-HK150-060061 3.307 3.465 2.402 2.362 5.039 9
Cincinnati Hawk 150 C4
C4-R/LCI-HK150-000116 3.465 4.016 4.567 10
Hardinge Conquest T42 C4-R/LCI-CNQT42-024010 1.890 3.465 0.945 0.394 3.386 7
C4
12 Station, 12 Position
Hardinge Conquest T51, T65 C4 C4-R/LCI-CNQT51-038012 2.445 4.094 1.500 1.472 4.016 7
Conquest VT100, VT200 C5-R/LCI-CNQT51-038012 2.760 4.094 1.500 1.472 4.016 7
C5
12 Station, 12 Position
For price and availability, contact pricing department. Fax 810-497-5661 Ordering example: 2 pieces, C4-RCE-HK150-060061 R = right hand
C4-LCE-HK150-060061 L = left hand
384
Machine Adapted Clamping Units
How to select machine adapted clamping units
Style: Right hand clamping Type 1 Style: Left hand clamping
unit (SECO Capto External turning unit (SECO Capto
sleeve orientation) sleeve orientation)
VDI VDI
orientation orientation
VDI VDI
orientation orientation
VDI VDI
orientation orientation
385
Machine Adapted Clamping Units
How to select machine adapted clamping units
Style: Right hand clamping Type 4 Style: Left hand clamping
unit (SECO Capto Internal turning unit (SECO Capto
sleeve orientation) sleeve orientation)
VDI VDI
orientation orientation
386
Machine Adapted Clamping Units
How to select machine adapted clamping units
Style: Right hand clamping Type 7 Style: Left hand clamping
unit (SECO Capto Internal turning unit (SECO Capto
sleeve orientation) sleeve orientation)
387
Machine Adapted Clamping Units
How to select machine adapted clamping units
Style: Right hand clamping Type 10 Style: Left hand clamping
unit (SECO Capto Internal turning unit (SECO Capto
sleeve orientation) sleeve orientation)
388
Description And Selection Of Toolholder System
Seco Capto Toolholders
A comprehensive range of Seco Capto toolholders. To clamp solid Seco PCBN inserts there is also a program of
The launch program of Seco Capto tools for negative inserts C-type holders. In these holders the insert is held down by
includes the new and unique P+ range of clamping systems. means of a top clamp equipped with a carbide plate, which
With P+, four different clamping systems (D, C, P and M) can distributes the clamping force onto the insert surface.
be mounted in the same insert seat.
The D-solution which is “First Choice” is the most stable. The
insert is locked with a clamp which presses the insert down
and into the seat.
389
Accessories
Tool for dismantling the polygon
socket on manual clamping unit Grease nipple Cover plug
Spare parts
Size Part No. Centre Periphery Size Part No. Size Part No.
390
Seco Capto – Spare Parts
Spare Parts
Manually operated clamping unit
Type 2085
1 2 4 6 6 7 8
Sleeve Screw Bushing Compression Compression Locking Screw
Size (4x) spring (4x) spring (5x) washer
C3 5252 015-01 416.1-834 3823 010-101 5561 001-37 – 5541 030-01 416.1-834
C4 5252 015-02 5513 020-26 3823 010-123 5561 001-36 – 5541 030-02 416.1-834
C5 5252 015-03 5513 020-14 3823 010-162 – 5561 001-44 5541 030-03 5513 020-14
9 10 11 12 13 14 15
Bushing Cam shaft Key Segment O-ring Holder ring Outer ring
Size (Size, mm) (set of 6) (set of 2)
C3 5638 022-01 5333 025-01 3021 013-080 (8,0) 5549 120-08 5641 005-01 5546 001-08 5541 025-01
C4 5638 022-02 5333 025-02 5680 010-03 (10,0) 5549 120-06 5641 005-05 5546 001-06 5541 025-06
C5 5638 022-03 5333 025-03 5680 010-04 (12,0) 5549 120-07 5641 005-06 5546 001-07 5541 025-07
16 17 19 20 21 25 25
Screw Draw bar O-ring Bushing Plug Inch Metric
Size screw screw
C3 3214 010-355 5461 100-08 3671 010-126 5638 023-02 3611 005-180 3214 010-360 3212 010-362
C4 3214 010-355 5461 100-06 5641 001-07 5638 023-02 3611 005-180 3214 010-360 3212 010-364
C5 3214 010-355 5461 100-07 3671 010-129 5638 023-02 3611 005-180 3214 010-360 3212 010-416
31 32 33 33
Pin Compression Inch Metric
Size (4x) spring wedge wedge
391
Seco Capto – Spare Parts
Spare Parts
Manually operated clamping unit
Type 2000
1 2 3 4 5 6 7 8
Drawbar Clamping Holder ring Ring Support Segment Thread O-ring
Size screw (set of 2) pin (set of 6) ring
C3 5461 105-01 5519 105-01 5546 002-01 5541 028-01 5552 032-01 5549 120-08 5512 091-03 5641 005-01
C4 5461 105-02 5519 105-02 5546 002-02 5541 028-02 5552 032-02 5549 120-06 5512 091-01 5641 005-05
C5 5461 105-03 5519 105-03 5546 002-03 5541 028-03 5552 032-03 5549 120-07 5512 091-02 5641 005-06
9 10 11 12 12 13 14
O-ring O-ring Screw Inch Metric Circlip Spring Key
Size blind plug blind plug (size, mm)
C3 3671 010-118 3671 010-124 3214 020-204 5643 042-02 3611 005-180 5545 042-01 5561 001-52 3021 013-090 (8,0)
C4 3671 010-120 3671 010-126 3214 020-255 5643 042-01 3611 005-180 3421 105-026 5561 001-53 5680 010-03 (10,0)
C5 3671 010-124 3671 010-128 3214 020-255 5643 042-01 3611 005-180 3421 105-032 5561 001-54 5680 010-04 (12,0)
Spare Parts
Manually operated clamping unit
Type 3000
1 2 2 3 4
Shank Clamping Inch Metric O-ring Retaining Key
Size code screw blind plug blind plug ring (size, mm)
C3 5512 096-01 5643 042-01 3611 005-180 3671 010-020 5545 040-03 3021 013-080 (8,0)
C4 -10020-40 5512 096-02 5643 042-01 3611 005-180 3671 010-022 5545 040-05 5680 010-03 (10,0)
-12020-50 5512 096-04* 5643 042-01 3611 005-180 3671 010-022 5545 040-05 5680 010-03 (10,0)
C5 5512 096-03 5643 042-01 3611 005-180 3671 010-024 5545 040-06 5680 010-04 (12,0)
*If you shorten the clamping unit C4-12020-50 use clamping screw 5512 096-02
392
Seco Capto – Spare Parts
Spare Parts
Manually operated clamping unit
VDI angled design
DIN 69880
1 2 3 4 6 7 8
Sleeve Screw Pin Bushing Compression Locking Screw
Size (4x) spring (6x) washer
C3 5252 010-01 416.1-834 3111 020-558 3823 010-101 5561 001-37 5541 030-01 416.1-834
C4 5252 010-02 5513 020-26 3111 050-610 3823 010-122 5561 001-36 5541 030-02 416.1-834
C5 5252 010-03 5513 020-14 3111 050-661 3823 010-162 5561 001-44 5541 030-03 5513 020-14
C6 5252 010-04 3213 010-410 3111 050-715 3823 010-183 5561 001-44 5541 030-04 5513 020-14
9 10 11 12 13 14 15
Bushing Cam shaft Key Segment O-ring Holder ring Outer ring
Size (Size, mm) (set of 6) (set of 2)
C3 5638 022-01 5333 025-01 3021 013-080 (8,0) 5549 120-08 5641 005-01 5546 001-08 5541 025-01
C4 5638 022-02 5333 025-02 5680 010-03 (10,0) 5549 120-06 5641 005-05 5546 001-06 5541 025-06
C5 5638 022-03 5333 025-03 5680 010-04 (12,0) 5549 120-07 5641 005-06 5546 001-07 5541 025-07
C6 5638 022-04 5333 025-04 5680 010-04 (12,0) 5549 120-04 5641 005-04 5546 001-04 5541 025-04
16 17 19 20 31 32
Screw Draw bar O-ring Bushing Pin Compression
Size (6 x) spring
C3 3214 010-355 5461 100-08 3671 010-126 5638 023-02 5552 005-01 5561 001-41
C4 3214 010-355 5461 100-06 5641 001-07 5638 023-02 – 5561 001-42
C5 3214 010-355 5461 100-07 3671 010-129 5638 023-03 – 5561 001-42
C6 3214 010-355 5461 100-04 3671 010-132 5638 023-03 – 5561 001-43
393
Seco Capto – Spare Parts
Spare Parts
Manually operated clamping unit
VDI straight design
DIN 69880
1 2 3 4 5 6 7
Sleeve Screw Pin Bushing Sleeve Compression Locking
Size (4x) spring (6x) washer
C3 5252 010-01 416.1-834 3111 020-558 3823 010-101 5638 024-01 5561 001-37 5541 030-01
C4 5252 010-02 5513 020-26 3111 050-610 3823 010-123 5638 024-02 5561 001-36 5541 030-02
C5 5252 010-03 5513 020-14 3111 050-661 3823 010-162 5638 024-03 5561 001-44 5541 030-03
C6 5252 010-04 3213 010-410 3111 050-715 3823 010-183 5638 024-04 5561 001-44 5541 030-04
8 9 10 11 12 13 14
Screw Bushing Cam shaft Key Segment O-ring Holder ring
Size (Size, mm) (set of 6) (set of 2)
C3 416.1-834 5638 022-01 5333 025-01 3021 013-080 (8,0) 5549 120-08 5641 005-01 5546 001-08
C4 416.1-834 5638 022-02 5333 025-02 5680 010-03 (10,0) 5549 120-06 5641 005-05 5546 001-06
C5 5513 020-14 5638 022-03 5333 025-03 5680 010-04 (12,0) 5549 120-07 5641 005-06 5546 001-07
C6 5513 020-14 5638 022-04 5333 025-04 5680 010-04 (12,0) 5549 120-04 5641 005-04 5546 001-04
15 16 17 19 20 21 31
Outer ring Screw Draw bar O-ring Bushing Plug Pin
Size (6x)
C3 5541 025-01 3214 010-355 5461 100-08 3671 010-126 5638 023-02 3611 005-180 5552 005-01
C4 5541 025-06 3214 010-355 5461 100-06 5641 001-07 5638 023-02 3611 005-180 –
C5 5541 025-07 3214 010-355 5461 100-07 3671 010-129 5638 023-03 3611 005-180 –
C6 5541 025-04 3214 010-355 5461 100-04 3671 010-132 5638 023-03 3611 005-140 –
32
Compression
Size spring
C3 5561 001-41
C4 5561 001-42
C5 5561 001-42
C6 5561 001-43
394
Seco Capto – Spare Parts
Spare Parts
Manually operated clamping unit
Type 2090
1 2 3 4 6 7 8
Sleeve Screw Pin Bushing Compression Locking Screw
Size (4x) spring (6x) washer
C3 5252 010-01 416.1-834 3111 020-558 3823 010-101 5561 001-37 5541 030-01 416.1-834
C4 5252 010-02 5513 020-26 3111 020-610 3823 010-122 5561 001-36 5541 030-02 416.1-834
C5 5252 010-03 5513 020-14 3111 020-661 3823 010-162 5561 001-44 5541 030-03 5513 020-14
C6 5252 010-04 3213 010-410 3111 050-715 3823 010-183 5561 001-44 5541 030-04 5513 020-14
C8 5252 010-05 3213 010-462 3111 020-769 3823 010-225 5561 001-47 5541 030-05 5513 020-14
9 10 11 12 13 14 15
Bushing Cam shaft Key Segment O-ring Holder ring Outer ring
Size (Size, mm) (set of 6) (set of 2)
C3 5638 022-01 5333 025-01 3021 013-080 (8,0) 5549 120-08 5641 005-01 5546 001-08 5541 025-01
C4 5638 022-02 5333 025-02 5680 010-03 (10,0) 5549 120-06 5641 005-05 5546 001-06 5541 025-06
C5 5638 022-03 5333 025-03 5680 010-04 (12,0) 5549 120-07 5641 005-06 5546 001-07 5541 025-07
C6 5638 022-04 5333 025-04 5680 010-04 (12,0) 5549 120-04 5641 005-04 5546 001-04 5541 025-04
C8 5638 022-05 5333 025-05 5680 010-04 (12,0) 5549 120-05 5641 005-07 5546 001-05 5541 025-05
16 17 19 20 22 23 25
Screw Draw bar O-ring Bushing Locating Dowel Screw
Size pin pin
C3 3214 010-355 5461 100-08 3671 010-126 5638 023-02 5552 063-05 5552 061-07 3212 010-363
C4 3214 010-355 5461 100-06 5641 001-07 5638 023-02 5552 063-07 5552 061-09 3212 010-414
C5 3214 010-355 5461 100-07 3671 010-129 5638 023-03 5552 063-06 5552 061-08 3212 010-466
C6 3214 010-355 5461 100-04 3671 010-132 5638 023-03 5552 063-03 5552 061-05 3212 010-469
C8 3214 010-355 5461 100-05 5641 001-29 5638 023-03 5552 063-04 5552 061-06 3212 010-521
26 31 32
O-ring Pin Compression
Size (6x) spring
395
Service Instructions
Clamping Force
In order to obtain the necessary clamping force (F) the
clamping unit should be tightened to the torque value (ft/lbs)
as recommended in the table below.
Dimensions in mm
Torque Mv
Size Nm ft./lbs.
C3 35 26
C4 50 37
C5 70 52
C6 90 67
C8 130 96
Lubrication
All manual clamping units are lubricated with BP Energrease
ACS-2 prior to delivery (Alternative MOBIL Temp Shc 32 or
STATOIL Beacon 325).
The lubrication should be checked every six months.
New grease can be applied via the cam.
1. Remove the screw (1).
1
2. Assemble grease nipple 5692 012-01.
3. Pump in grease with grease gun until it begins to seep
out round the key handle at the cam.
4. Remove grease nipple.
5. Replace screw (1) into the cam.
Note: Clamping unit must be clamped during lubrication.
Cover Plug
A cover plug should always be used to protect the ground
surfaces of the connecting sleeve from dirt or damage on the
clamping units, when they do not have a cutting unit coupled
or when they are held in stock.
396