Professional Documents
Culture Documents
Sutton Tools Industrial Catalogue - AUG 2020
Sutton Tools Industrial Catalogue - AUG 2020
2020
Use this cross reference table to identify recommended tool
application by material group. Tool applications can be found
at the bottom of each page.
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined by referring to the material
cross reference listing in the application guide at the back of this catalogue.
Industrial Catalogue
10 Steel - High alloy, cast & tool A 200 680
11 HT 325 1100
12 Steel - Corrosion Ferritic / Martensitic A 200 680
resistant & cast
13 Martensitic QT 240 810
14.1 Stainless Steel Austenitic AH 180 610
M 14.2 Duplex 250 840
14.3 Precipitation Hardening 250 840
15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610
16 Pearlitic 260 880
17 Cast Iron - Nodular Ferritic 160 570
K (GGG)
18 Pearlitic 250 840
19 Cast Iron - Malleable Ferritic 130 460
Effective 1st August 2020
INDUSTRIAL
20 Pearlitic 230 780
21 Aluminum & Magnesium Non Heat Treatable 60 210
- wrought alloy
22 Heat Treatable AH 100 360
CATALOGUE
23 Aluminum & Magnesium Non Heat Treatable 75 270
- cast alloy ≤12% Si
24 Heat Treatable AH 90 320
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460
2020
N
26 Copper & Cu alloys Free cutting, Pb > 1% 110 390
(Brass/Bronze)
27 Brass (CuZn, CuSnZn) 90 320
28 Bronze (CuSn) 100 360
29 Non-metallic - Thermosetting & fiber-reinforced plastics
30 Non-metallic - Hard rubber, wood etc.
31 High temp. alloys Fe based A 200 680
32 AH 280 950
33 Ni / Co based A 250 840
Sutton Tools Pty Ltd ABN 12 004 175 731 34 AH 350 1180
35 C 320 1080
Australia (Head Office)
S 36 Titanium & Ti alloys CP Titanium 400 MPa
378 Settlement Road, Thomastown 3074, Victoria Australia
37.1 Alpha alloys 860 MPa
T +61 3 9280 0800 F +61 3 9464 0015
37.2 Alpha / Beta A 960 MPa
Customer Service alloys
37.3 AH 1170 MPa
T 1800 335 350 F 1800 333 127 E cservice@sutton.com.au
37.4 Beta alloys A 830 MPa
Special Sales AH 1400 MPa
37.5
T 1800 035 010 F 1800 804 084 E specsales@sutton.com.au
Since 1917
and produce ever higher levels “the buyer” means the person or company placing an order with the seller for the purchase of goods/services.
“the goods/services” means the goods/services supplied by the seller under its contract with the buyer.
of specifications that exceed
market expectations. 2. Payment
2.1 The purchase price in relation to goods/services shall be payable net within 30 days from the end of the month in which the goods/services
were despatched by the seller to the buyer, unless other terms of payment are expressly stated in writing and signed by the seller.
2.2 Should the buyer fail to pay any amount to the seller when it is due, in respect to any order, the seller in addition to any other rights it
World Class Cutting Tools may have, shall be entitled to suspend further deliveries in respect to any order.
Founded in 1917, Sutton Tools began as a family enterprise, 3. Rights in relation to goods/services
manufacturing threads and gauges, and over time has 3.1 The property in the goods/services shall not pass to the buyer until payment in full on any account whatsoever has been received by
expanded its expertise into a broader portfolio of cutting the seller, and the buyer’s payment has been honored.
3.2 If the buyer fails to honor any of these Terms & Conditions of Sale, the seller, without notice shall have the right to take possession of
tools. Today, Sutton Tools remains an Australian family the goods/services and/or recover the full amount owing to the seller together with interest and costs.
business that is renowned for its high-quality cutting tools 3.3 The buyer shall hold the goods/services supplied by the seller in such a way as to identify them as being goods/services in which the
and power tool accessories for a wide range of specialised property has not passed to the buyer pending payment in full.
industrial applications. 3.4 Until payment of all debts owing to the seller (some which may not necessarily be due for payment), the seller has the right to retake
and resume possession of any of the goods/services, should an arrangement under Part X of the Bankruptcy Act 1966 be invoked
Sutton Tools manufactures cutting tools at three sites against the buyer, or the buyer is placed into receivership/liquidation or wound up.
across Victoria, both for the domestic market and for export. 4. General condition of sale
The bulk of general production occurs at our head office site
4.1 Delivery Free into store, to Sutton Tools Distributors, in pack quantities as detailed in the price list.
at Thomastown, in Melbourne’s northern suburbs, with more 4.2 Minimum orders value $250.00 nett for F.I.S delivery. Orders less than $250.00, a $10.00 service and handling fee will apply.
specialised operations centred at our Maryborough facility. 4.3 Goods sent direct to end users: a surcharge of $25.00 will apply to consignments less that 5 kilo’s, above 5 kilo’s – price on application.
We also have overseas production plants in Auckland, If applicable, GST of 10% will be charged.
New Zealand, and in the Netherlands. 4.4 All prices shown are in AUSTRALIAN DOLLARS.
4.5 Priced items are stockable; items outside this range are made to special order only. The prices set out and referred to herein are
While Sutton Tools supplies tools to a broad spectrum of recommended prices only and there is no obligation to comply with the recommendation.
industries - including general manufacturing, electronic 5. Claims and defects
manufacturing, automotive, medical, mining and power 5.1 Claims due to customer ordering errors will be subject to a restocking charge of 15% and must be returned in a saleable condition -
generation - most advancement in material technology it unmarked, unopened, pristine condition to current specifications. Sutton Tools’ sales department should be contacted prior to any goods
experiences are occurring in the aerospace, defence and oil/ being returned. Any goods being returned should be freighted at Customer / Buyer cost.
gas industries. The development of so-called ‘super alloys’ 5.2 Claims must be reported without delay upon discovery of the same and in any event not later than 7 working days following delivery.
5.3 Where complaints in respect to defects or warranted goods are justified our liability is limited solely to the obligation to take back the
for these sectors is constantly pushing material
goods and to replace them free of charge.
performance boundaries. 5.4 The company reserves the right to adopt without prior notice, standards and dimensions other than those set forth herein.
Sutton Tools has a long standing commitment to our
Disclaimer: Whilst every effort has been made to ensure that the information is accurate, Sutton Tools reserve the right to correct any errors,
employees and partners. We have a highly focused team inaccuracies or omissions and to change or update information at any time without prior notice.
who are dedicated to produce and deliver our globally
competitive program of high value products. We continue
to expand our business and produce ever higher levels of
specifications that exceed market expectations.
Our aggressive investment policy compliments our product
offer with globally integrated logistics, research and
development and value added services at world best practice.
We've made it easier to
find the right tool fast...
For easy tool reference, you will find an extensive
application based index at the start of each section.
These icons below can be found on the product pages throughout the catalogue,
and at a glance the characteristic features of the tool can be identified.
Standard
ISO
A B HE D h7
Shank
4xd
3x 4x 5x 6x 8x 10 x 12 x 14 x
diameter diameter diameter diameter diameter diameter diameter diameter
(DIN 1412) Carbide
Normal Form A Form B Form C Special Normal IK
Facet Standard
Drill Application
Radius
Lips
Countersink
Geometry
Tap Application
Blind Hole Through Hole Through Blind Hole Thread Crosshole Single 3 Flutes
Straight Flute Straight Flute Hole Gun Spiral Flute Forming Flute
Internal
Coolant
High Speed Z-Axis Deep Hole Single Multi Internal Internal Internal
Cutting Control Coolant Coolant Coolant Coolant Coolant
Groove Groove (Helical) (Axial) (Radial)
UNEF
Thread Forms
r
Directions
Endmill Application
Geometry
45º
Cutting
HR HRS NF NR STF WR
Cutting
www.suttontools.com
1917 - the start to an iconic Australian
family brand, manufacturing cutting tools
for distribution throughout Australia...
1917 - Westgarth factory
1960 - Ground-from-Solid
Commitment to Quality
A well-managed structured system embracing all manufacturing processes
from the floor up, driven with a continuous improvement policy ensures that
our customers can be completely satisfied with the quality of our products.
This includes all aspects of the purchasing process, with full traceability
from the moment customers place the order to delivery.
Sutton Tools is a leader in the field of the conventional grinding and
advanced super abrasive grinding. This Grinding Technology ensures that
our cutting tools are of the highest accuracy and performance. Modern CNC
machines give pick-and-place robot handling functions, that not only give
repeatable quality operations but a safer work place environment.
The structure of controls and checks throughout the manufacturing process,
backed by documented procedures and support personnel ensures that we
continually manufacture products that will exceed customer expectations.
www.suttontools.com
Research &
Development.
Through formal cooperation with
industry, leading Universities, research
organisations and government,
we continually seek technological
advancements to better serve industry.
www.suttontools.com
Sutton Tools has been
successfully delivering quality
cutting tools to customers
throughout Australia and
the world since 1917.
Reliable Customer
Service.
We are here to help you
Stock requirements and needs can vary from customer to customer and
Sutton Tools has implemented varied ordering systems to receive orders
and seamlessly process them.
We combine the latest logistic technology (freight management systems)
with personalised customer service to ensure that you get the products
you order, when you need them on time, every time.
Our comprehensive customer service comprises:
• EDI and internet ordering
• Fully integrated ERP system
• Automatic delivery and order confirmation
• Quick backorder response
www.suttontools.com
We have over 20,000 SKUs
and our stock availability
consistently averages in
the high 90%.
Distribution
and Logistics.
Global Distribution Network
Our International Distribution Centre uses modern radio frequency
scanning technology coupled with the latest carousel and stock
replenishment systems which allows accurate stock control and
efficient warehouse operation. We have over 20,000 SKUs and our
stock availability consistently averages in the high 90%. From a
customer perspective, this provides confidence in breadth and
depth of stock cover and reliable delivery service.
Our Distribution Centre comprises:
• Modern radio frequency scanning technology and latest
carousel and stock replenishment systems
• Computerised dispatch system
• Warehousing over 20,000 SKUs
• Picking over 10,000 items daily
• Dispatch of over 1,000 consignments daily
• Order and dispatch within one hour turnaround
• Global Storage Area in excess of 5,000m²
www.suttontools.com
Meeting Your
Exact Requirements.
Special Tools
Sutton Tools use state-of-art CNC tool grinding equipment, and
manufacturing processes to produce specialised cutting tools,
distribute to industries such as plumbing, electrical, automotive,
aerospace, marine, transport, construction, surgical, manufacturing
and agriculture.
We use only the very best European grades of materials including
powder metallurgy, HSS cobalt and ultra-fine grain carbide. Materials
are complimented by the latest generation of thin film PVD coatings,
providing many advantages in tool life, component surface finishes
and the ability for the tools to operate in low or minimum coolant
environments, making them more environmentally friendly.
All tools are subject to stringent quality and performance checking
and testing to ensure best results. Our customers can benefit from
the advantages of our reliable cost effective world’s-best practice
manufacture, supply and support capabilities, now and well into the
foreseeable future. Our Special Tools division offers express service
on non-standard taps and other cutting tools.
www.suttontools.com
One-Stop-Shop
Regrinding and
Coating.
Australia’s only company to
provide regrinding, coating and
heat treatment on the one site.
-43%
high accuracy and quality. All tools -49%
50
are subject to stringent quality and
performance checking and testing 25
to ensure best results. 0
0 1 2 3
No. of Regrinds
Example: D332 10mm 5xD IK R30N Carbide
Surface Technology Drill, AICrN coated.
Coatings Service
Complementing our regrind facility, Surface Technology Coating (STC)
provides a Physical Vapour Deposition (PVD) coating service, and is at the
forefront of heat treatment and surface engineering technology.
In addition to providing PVD coating, STC provides plasma nitriding and
vacuum heat treatment for various tools and components. Our unique
position enables us to provide tailored solutions to a wide range of friction
and wear problems.
www.suttontools.com
Sutton Tools
Expert Tool Selector.
www.suttontools.com/expert-tool-selector
www.suttontools.com
e Bullet
Drills Jobber, Silver & Blu
ration
- Split point for easier penet
and hand held drilling
- Designed for machine
D102
D101
Catalogue Code A0402
A0402
Discount Group HSS
HSS
Material Blu
Brt
Surface Finish N
N
Sutton Designation R30
R30
Geometry 118° Standard
118° Standard
Point Type Bulk (10)
Bulk (10)
Order Quantity Item # List Price
Item # List Price
l2 $4.32
d1 (h8) l1 $4.32 D102 0105
Size Ref. mm gauge D101 0105 •
34 12 $10.26
0105 1.05 D101 0107 •
41 17 $10.26
1.07 58 D101 0109 $4.32
0107 44 19 $4.32 D102 0110
1.09 57 D101 0110 $4.32
0109 36 14 $4.32 D102 0115
0110 1.10 D101 0115 •
36 14 $10.26
0115 1.15 D101 0118 $4.32
44 19 $4.32 D102 0119
1.18 56 D101 0119 $4.32
0118 44 19 $4.32 D102 0120
1.19 3/64 D101 0120 $4.32
0119 38 16 $4.32 D102 0125
0120 1.20 D101 0125 $4.32
38 16 $4.32 D102 0130
0125 1.25 D101 0130 •
38 16 $6.46
0130 1.30 D101 0132 $5.20
48 22 $5.20 D102 0135
1.32 55 D101 0135
0132 38 16 $6.46
•
0135 1.35 D101 0139 $5.20
48 22 $5.20 D102 0140
1.40 54 D101 0140 $5.20
0139 40 18 $5.20 D102 0145
0140 1.40 D101 0145 $3.87
40 18 $3.87 D102 0150
0145 1.45 D101 0150 •
40 18 $6.46
0150 1.50 D101 0151 $5.20
48 22 $5.20 D102 0155
1.51 53 D101 0155 $3.79
0151 40 18 $3.79 D102 0159
0155 1.55 D101 0159 $3.79
48 22 $3.79 D102 0160
1.59 1/16 D101 0160
0159 43 20 $5.88
•
0160 1.60 D101 0161 $4.66
48 22 $4.66 D102 0165
1.61 52 D101 0165 $3.65
0161 43 20 $3.65 D102 0170
0165 1.65 D101 0170 •
43 20 $5.88
0170 1.70 D101 0171 $4.32
51 25 $4.32 D102 0175
1.70 51 D101 0175
0171 43 20 $5.88
•
0175 1.75 D101 0178 $3.50
51 25 $3.50 D102 0180
1.78 50 D101 0180 $4.16
0178 46 22 $4.16 D102 0185
0180 1.80 D101 0185 •
46 22 $5.88
0185 1.85 D101 0184 $3.50
51 25 $3.50 D102 0190
1.85 49 D101 0190
0184 46 22 $5.88
•
0190 1.90 D101 0193 $4.16
51 25 $4.16 D102 0195
1.93 48 D101 0195 $3.50
0193 46 22 $3.50 D102 0198
0195 1.95 D101 0198 •
51 25 $5.88
1.98 5/64 D101 0199 $3.50
0198 51 25 $3.50 D102 0200
1.99 47 D101 0200 $4.16
0199 49 24 $4.16 D102 0205
0200 2.00 D101 0205 •
49 24 $5.88
0205 2.05 D101 0206 •
54 29 $5.88
2.06 46 D101 0208 $3.50
0206 54 29 $3.50 D102 0210
2.08 45 D101 0210 $4.16
0208 49 24 $4.16 D102 0215
0210 2.10 D101 0215 •
49 24 $5.88
0215 2.15 D101 0218 $3.50
54 29 $3.50 D102 0220
2.18 44 D101 0220
0218 53 27 H
2.20 S
0220 N 37.1 37.2 37.3 37.4 37.5 38.1
38.2 39.1 39.2 40 41
M K 31 32 33 34 35 36
P 25 26 27 28 29 30
• •
19 20 21 22 23 24
ISO 14.2 14.3 15 16 17 18
9 10 11 12 13 14.1
• •
•
•
8
•
7
•
6
•
5
•
4
• •
3
• •
1 2
• •
VDI 3323
• •
• Optimal • Effective
• •
• •
• •
• •
D101
• •
•
• •
•
• •
•
•
•
•
•
•
•
•
13
Sutton Tools Code System – explained
Drills
Sutton Tools item # system makes it easier to identify a product.
The codes are based on a universal prefix and suffix system.
Prefix (Catalogue Code) – is alpha numeric, and is unique to a specific product range.
The letter is relevant to the type of tool, and the number refers to a product range.
57
B - Burs
C - Countersinks Catalogue Code Size Ref.
D - Drills
Countersinks &
E - Endmills
L - Literature
D101 0150 Counterbores
65
Z - Tool Holders / Chucks
Suffix (Size Ref.) – in most cases is relevant to the diameter or size reference
of an item and is based on a metric value. ISO Taps
For example 5mm = 0500, and 1/4" = 0635 (inch converted to decimal).
Suffix can also refer to set code or number of pieces in a set.
Benefits of the coding system
• Range identification simplified.
125
• Search online ‘Expert Tool Selector’ by range.
153
This highlights what the product is made of. (e.g. VHM = Carbide, HSS = High Speed Steel)
For the full list of explanation, refer to page 215 of the technical information section.
Surface Coatings
Reamers
Many of our products have various surface coatings to improve the performance.
Surface coatings improve productivity by increasing speeds and feeds and reducing
friction related problems.
Symbols
For all of our product pages you will find symbols which depict what specifications
169
these products were made to. Symbols have been used to simplify product identification.
A full list of symbols can be found at the start of this catalogue.
Some common examples are: Carbide Burs
depth
Other
i
195
Information
Contents
Drills Jobber, Heavy Duty.................................................................................. 33 ISO Taps Metric, Straight Flute, N, Left Hand............................................ 71
Drills Jobber, Silver & Blue Bullet................................................................... 20 ISO Taps Pipe, G (BSPF), Spiral Flute.............................................................. 121
Drills Jobber, TiNite, Viper Plus....................................................................... 28 ISO Taps Pipe, G (BSPF), Spiral Point Gun............................................... 120
Drills Left Hand Cobalt...................................................................................... 45 ISO Taps Pipe, G (BSPF), Straight Flute.................................................... 120
Drills Morse Taper Accessories....................................................................... 51 ISO Taps Pipe, Rc (BSPT), Straight Flute.................................................. 123
Drills Morse Taper Shank.................................................................................. 46 ISO Taps Pipe, Rp & Pg Series, Straight Flute........................................ 123
Drills Morse Taper Shank, Heavy Duty........................................................ 49 ISO Taps UNC, Forming, Single Coolant Groove....................................... 93
Drills Morse Taper Shank, Long Series........................................................ 50 ISO Taps UNC, Gun, N......................................................................................... 89
Drills Panel, Double Ended............................................................................... 53 ISO Taps UNC, Machine Nut, Long Shank................................................... 94
Drills Stub, Blu...................................................................................................... 37 ISO Taps UNF, Forming, Single Coolant Groove..................................... 105
Countersinks Three Flute, 90°...................................................................... 60 Endmills 3 Flute, R30 N, Regular, Threaded.......................................... 131
ISO Taps 8UN, Straight Flute, N.................................................................. 106 Endmills 4 Flute, R30 N, Regular............................................................... 140
ISO Taps BSF, BSB & BA, Straight Flute, N.............................................. 118 Endmills 4 Flute, R30 N, Regular, Threaded.......................................... 132
ISO Taps BSW, Forming, Single Coolant Groove.................................... 116 Roughers HR (fine), R30 NH, Regular....................................................... 149
ISO Taps BSW, Gun, N..................................................................................... 112 Roughers NR (normal), R30 WN, Long..................................................... 147
ISO Taps BSW, Machine Nut, Long Shank............................................... 117 Roughers NR (normal), R30 WN, Regular............................................... 145
ISO Taps BSW, Spiral Flute, N...................................................................... 114 Roughers Woodruff Cutter, Threaded....................................................... 135
ISO Taps BSW, Straight Flute, N.................................................................. 108 Slot Drills 2 Flute, R30 N, Long................................................................... 138
ISO Taps BSW, Straight Flute, N, Left Hand............................................ 111 Slot Drills 2 Flute, R30 N, Long................................................................... 139
ISO Taps Metric Fine, Gun, N.............................................................................81 Slot Drills 2 Flute, R30 N, Long, Threaded ............................................ 130
ISO Taps Metric Fine, Spiral Flute, N............................................................. 83 Slot Drills 2 Flute, R30 N, Regular ............................................................ 136
ISO Taps Metric Fine, Straight Flute, N........................................................ 78 Slot Drills Ballnose, 2 Flute, R30 N, Long....................................................148
ISO Taps Metric, Forming, Single Coolant Groove.................................................. 77 Slot Drills Threaded, 2 Flute, R30 N, Regular ....................................... 128
2
Contents
Reamers Machine............................................................................................. 158 Technical Information ISO Metric Tap Class & Tolerance................. 234
Reamers Morse Taper Socket...................................................................... 164 Technical Information ISO Pipe Tap Thread Systems........................ 237
Carbide Burs Ball Shape................................................................................ 176 Technical Information Shank Designs - HSS Tools............................. 219
Carbide Burs Cylindrical, Radius End........................................................ 174 Technical Information Tapping Drill Size Chart..................................... 228
Carbide Burs Cylindrical, Square End........................................................ 172 Technical Information Tapping Drill Size Chart (Fluteless)............... 231
Carbide Burs Oval Shape............................................................................... 178 Technical Information Tensile Strength vs Hardness (≈).................. 218
Carbide Burs Sets............................................................................................. 188 Technical Information Thread Forms Components & Tap Limits...... 232
Carbide Burs Tree Shape, Pointed End..................................................... 182 Technical Information Unified Screw Thread Tolerancing System.... 235
3
Product Index
Carbide Burs
Catalogue Discount Tool Surface
Page No. Geometry Description Point Type Shank
Code Group Material Finish
B200 172 B0102 Double Cut Carbide Burs, Cylindrical Square End VHM Brt 1/4"
B201 174 B0102 Double Cut Carbide Burs, Cylindrical Radius End VHM Brt 1/4"
B202 176 B0102 Double Cut Carbide Burs, Ball Shape VHM Brt 1/4"
B203 178 B0102 Double Cut Carbide Burs, Oval Shape VHM Brt 1/4"
B204 180 B0102 Double Cut Carbide Burs, Tree Shape Radius End VHM Brt 1/4"
B205 182 B0102 Double Cut Carbide Burs, Tree Shape Pointed End VHM Brt 1/4"
B206 183 B0102 Double Cut Carbide Burs, Flame Shape VHM Brt 1/4"
B207 184 B0102 Double Cut Carbide Burs, Taper Shape VHM Brt 1/4"
B208 186 B0102 Double Cut Carbide Burs, Cone Shape VHM Brt 1/4"
B209 187 B0102 Double Cut Carbide Burs, Inverted Cone Shape VHM Brt 1/4"
B210 172 B0102 Double Cut Carbide Burs, Cylindrical, Long Reach Square End VHM Brt 1/4"
B211 174 B0102 Double Cut Carbide Burs, Cylindrical, Long Reach Radius End VHM Brt 1/4"
B212 176 B0102 Double Cut Carbide Burs, Ball Shape, Long Reach VHM Brt 1/4"
B213 180 B0102 Double Cut Carbide Burs, Tree Shape, Long Reach Radius End VHM Brt 1/4"
B214 184 B0102 Double Cut Carbide Burs, Taper Shape, Long Reach VHM Brt 1/4"
B215 172 B0102 Al Cut Carbide Burs, Cylindrical Square End VHM Brt 1/4"
B216 174 B0102 Al Cut Carbide Burs, Cylindrical Radius End VHM Brt 1/4"
B217 176 B0102 Al Cut Carbide Burs, Ball Shape VHM Brt 1/4"
B218 178 B0102 Al Cut Carbide Burs, Oval Shape VHM Brt 1/4"
B219 180 B0102 Al Cut Carbide Burs, Tree Shape Radius End VHM Brt 1/4"
B220 184 B0102 Al Cut Carbide Burs, Taper Shape VHM Brt 1/4”
B300 173 B0102 Double Cut Carbide Burs, Cylindrical Square End VHM Brt 6mm
B301 175 B0102 Double Cut Carbide Burs, Cylindrical Radius End VHM Brt 6mm
B302 177 B0102 Double Cut Carbide Burs, Ball Shape VHM Brt 6mm
B303 179 B0102 Double Cut Carbide Burs, Oval Shape VHM Brt 6mm
B304 181 B0102 Double Cut Carbide Burs, Tree Shape Radius End VHM Brt 6mm
B305 182 B0102 Double Cut Carbide Burs, Tree Shape Pointed End VHM Brt 6mm
B306 183 B0102 Double Cut Carbide Burs, Flame Shape VHM Brt 6mm
B307 185 B0102 Double Cut Carbide Burs, Taper Shape VHM Brt 6mm
B308 186 B0102 Double Cut Carbide Burs, Cone Shape VHM Brt 6mm
B315 173 B0102 Al Cut Carbide Burs, Cylindrical Square End VHM Brt 6mm
B316 175 B0102 Al Cut Carbide Burs, Cylindrical Radius End VHM Brt 6mm
B317 177 B0102 Al Cut Carbide Burs, Ball Shape VHM Brt 6mm
B319 181 B0102 Al Cut Carbide Burs, Tree Shape Radius End VHM Brt 6mm
B900 188 B0102 Carbide Burs, Sets & Merchandiser VHM Brt 1/4"
B902 189 B0102 - Carbide Burs, Die Grinder Kit - - - -
Countersinks
Catalogue Discount Tool Surface
Page No. Description Point Type Standard
Code Group Material Finish
C100 63 B0709 Counterbore - HSS Co Brt DIN373
C101 62 A1106 Deburring Countersink, Cross Hole 90° HSS Brt -
C102 62 A1108 Deburring Countersink, Cross Hole 90° HSS TiN -
C103 61 A1106 Countersink, Single Flute 90° HSS Brt -
C104 61 A1108 Countersink, Single Flute 90° HSS TiN -
C105 60 A1106 Countersink, Three Flute 90° HSS Brt -
C106 60 A1108 Countersink, Three Flute 90° HSS TiN -
4
Product Index
Drills
Catalogue Discount Tool Surface
Page No. Description Point Type Standard
Code Group Material Finish
D100 39 A1002 Drill, Stub, Blu 118° Form C HSS Blu ANSI B94-11
D101 17 A1202 Drill, Jobber, Silver Bullet, Metric Sets 118° Standard HSS Brt DIN338
D101 19 A1202 Drill, Jobber, Silver Bullet, Imperial Sets 118° Standard HSS Brt DIN338
D101 20 A0402 Drill, Jobber, Silver Bullet 118° Standard HSS Brt DIN338
D102 17 A1202 Drill, Jobber, Blue Bullet, Metric Sets 118° Standard HSS Blu DIN338
D102 19 A1202 Drill, Jobber, Blue Bullet, Imperial Sets 118° Standard HSS Blu DIN338
D102 20 A0402 Drill, Jobber, Blue Bullet 118° Standard HSS Blu DIN338
D103 17 A1216 Drill, Jobber, TiNite, Metric Sets 118° Form A HSS TiN DIN338
D103 19 A1216 Drill, Jobber, TiNite, Imperial Sets 118° Form A HSS TiN DIN338
D103 28 A0420 Drill, Jobber, TiNite 118° Form A HSS TiN DIN338
D105 17 A1202 Drill, Jobber, Viper, Bright, Metric Sets 118° Standard HSS Brt DIN338
D105 19 A1202 Drill, Jobber, Viper, Bright, Imperial Sets 118° Standard HSS Brt DIN338
D109 17 A0404 Drill, Jobber, Cobalt Heavy Duty, Metric Sets 135° Form C HSS Co Colour Temp DIN338
D109 19 A0404 Drill, Jobber, Cobalt Heavy Duty, Imperial Sets 135° Form C HSS Co Colour Temp DIN338
D109 33 A0404 Drill, Jobber, Cobalt Heavy Duty 135° Form C HSS Co Colour Temp DIN338
D113 40 A0502 Drill, Long Series 118° Standard HSS Blu ANSI B94-11
D115 46 A0702 Drill, Morse Taper Shank 118° Form A HSS Blu DIN345
D118 51 A0702 Morse Taper Sleeve - Alloy Brt -
D120 52 A0906 Drill, Reduced Shank, 10mm or 3/8” 118° Standard HSS Blu -
D121 53 A0802 Drill, Panel, Single Ended 135° Standard HSS Brt -
D122 53 A0802 Drill, Panel, Double Ended 135° Standard HSS Brt -
D123 53 A1002 Drill, Panel, Stub 118° Standard HSS Brt -
D124 53 A0802 Drill, Panel, Single Ended 135° Standard HSS Blu -
D125 53 A0802 Drill, Panel, Double Ended 135° Standard HSS Blu -
D126 39 A1002 Drill, Stub, Blu 118° Form C HSS Blu ANSI B94-11
D130 54 A0802 Drill, Panel, Double Ended 135° Standard HSS Co Colour Temp -
D140 50 A0702 Drill, Morse Taper Shank, Long Series 118° Standard HSS Blu DIN 341
D141 49 A0702 Drill, Morse Taper Shank, Heavy Duty 118° Form A HSS Co Colour Temp DIN345
D142 51 A0702 Drill, Morse Drill, Drift Key - - - -
D179 17 A1202 Drill, Jobber, Viper Plus, Metric Sets 118° Form C HSS TiAlN Tip DIN338
D179 19 A1202 Drill, Jobber, Viper Plus, Imperial Sets 118° Form C HSS TiAlN Tip DIN338
D179 28 A0402 Drill, Jobber, Viper Plus 118° Form C HSS TiAlN Tip DIN338
D180 17 A1202 Drill, Jobber, R40 InOx, Metric Sets 130° HSS TiAlN Tip ~DIN338
D180 35 A0402 Drill, Jobber, R40 InOx 130° HSS TiAlN Tip ~DIN338
D186 37 A1002 Drill, Stub, Blu 118° Form C HSS Blu DIN1897
D187 44 A0502 Drill, Extra Long Reach 118° Standard HSS Brt ANSI B94-11
D188 52 A0906 Drill, Reduced Shank, 12.5mm 118° Standard HSS Blu -
D202 45 A0404 Drill, Jobber, Cobalt Heavy Duty 135° Form C HSS Co Colour Temp DIN338
5
Product Index
Endmills
Catalogue Discount Tool Surface
Page No. Description Shank Standard
Code Group Material Finish
E100 136 B0502 Slot Drill, 2 Flute, R30 N, Stub DIN 1835-A HSS Co.8 Brt JIS
E102 138 B0502 Slot Drill, 2 Flute, R30 N, Long DIN 1835-A HSS Co.8 Brt JIS
E104 128 B0602 Slot Drill, 2 Flute, R30 N, Regular (threaded) DIN 1835-D HSS Co Brt -
E105 128 B0604 Slot Drill, 2 Flute, R30 N, Regular (threaded) DIN 1835-D HSS Co TiN -
E106 130 B0602 Slot Drill, 2 Flute, R30 N, Long (threaded) DIN 1835-D HSS Co Brt -
E113 148 B0502 Slot Drill, Ballnose, 2 Flute, R30 N, Long Reach DIN 1835-A HSS Co.8 Brt -
E119 131 B0602 Endmill, 3 Flute, R30 N, Regular (threaded) DIN 1835-D HSS Co Brt -
E125 140 B0502 Endmill, 4 Flute, R30 N, Regular DIN 1835-A HSS Co.8 Brt JIS
E127 143 B0502 Endmill, 4 Flute, R30 N, Long DIN 1835-A HSS Co.8 Brt JIS
E129 132 B0602 Endmill, 4 Flute, R30 N, Regular (threaded) DIN 1835-D HSS Co Brt -
E130 132 B0604 Endmill, 4 Flute, R30 N, Regular (threaded) DIN 1835-D HSS Co TiN -
E131 134 B0602 Endmill, 4 Flute, R30 N, Long (threaded) DIN 1835-D HSS Co Brt -
E142 145 B0402 Rougher, NR (normal), R30 WN, Regular DIN 1835-A HSS Co.8 Brt JIS
E143 146 B0404 Rougher, NR (normal), R30 WN, Regular DIN 1835-A HSS Co.8 TiCN JIS
E144 145 B0402 Rougher, NR (normal), R30 WN, Regular DIN 1835-B HSS Co.8 Brt JIS
E146 147 B0402 Rougher, NR (normal), R30 WN, Long DIN 1835-A HSS Co.8 Brt DIN844L
E168 149 B0402 Rougher, HR (fine) R30 NH, Regular DIN 1835-A HSS Co.8 Brt JIS
E169 149 B0404 Rougher, HR (fine) R30 NH, Regular DIN 1835-A HSS Co.8 TiCN JIS
E178 135 B0709 Rougher, Woodruff Cutter, Threaded DIN 1835-D HSS Brt
E184 139 B0608 Slot Drill, 2 Flute, R30 N, Long DIN 1835-A HSS Co.8 TiAlN DIN844L
E192 142 B0608 Endmill, 4 Flute, R30 N, Regular DIN 1835-A HSS Co.8 TiAlN DIN844K
E225 138 B0502 Slot Drill, 2 Flute, R30 N, Long DIN 1835-A HSS Co.8 Brt JIS
E227 140 B0502 Endmill, 4 Flute, R30 N, Regular DIN 1835-A HSS Co.8 Brt JIS
E229 143 B0502 Endmill, 4 Flute, R30 N, Long DIN 1835-A HSS Co.8 Brt JIS
E230 144 B0516 Endmill, 4 Flute, R30 N, Long DIN 1835-A HSS Co.8 TiCN JIS
Literature & Miscellaneous
Catalogue Discount Tool Surface
Page No. Description Geometry Standard
Code Group Material Finish
L100 192 Z0502 Engineers Black Book - - - -
L103 192 Z0502 Engineers Black Book - Large Edition - - - -
L200 192 Z0502 Fasteners Black Book - - - -
L300 192 Z0502 Electrical Black Book - - - -
M300 56 Z0802 Tool Bit Round M2 HSS Brt -
M301 55 Z0802 Tool Bit Square M2 HSS Brt -
M302 55 Z0802 Tool Bit Square M42 CoHSS Brt -
M304 56 Z0802 Tool Bit Bevel M42 CoHSS Brt -
M800 193 Z1006 Cutting Lubricant, Venom - - - -
6
Product Index
Reamers
Catalogue Discount Tool Surface
Page No. Description Geometry Standard
Code Group Material Finish
R100 156 B0302 Reamer, Hand 10° Left Helix HSS Brt DIN206 / ISO 236
R101 158 B0302 Reamer, Machine 10° Left Helix HSS Brt DIN208 / ISO 521
R102 161 B0302 Reamer, Chucking 10° Left Helix HSS Co Brt DIN212 / ISO 521
R104 162 B0302 Reamer, Bridge 15° Left Helix HSS Brt -
R105 163 B0302 Reamer, Taper Pin 7° Left Helix HSS Brt -
R106 164 B0302 Reamer, Morse Taper Socket, Roughing 7° Left Helix HSS Brt -
R107 164 B0302 Reamer, Morse Taper Socket, Finishing 7° Left Helix HSS Brt -
R108 165 B0302 Reamer, Taper Pipe 15° Left Helix HSS Brt -
R109 166 B0304 Reamer, Adjustable Straight TCA Brt -
R110 166 B0304 Reamer, Adjustable, Blade - TCA Brt -
R111 167 B0304 Reamer, Adjustable, Pilot - TCA Brt -
R112 167 B0304 Reamer, Adjustable, Nut - TCA Brt -
Taps
Catalogue Discount Geometry Tool Surface
Page No. Description Thread Standard
Code Group Type Material Finish
T384 68 D0702 Tap, Straight Flute, N M Taper HSS Brt ISO529
T385 68 D0702 Tap, Straight Flute, N M Intermediate HSS Brt ISO529
T386 69 D0702 Tap, Straight Flute, N M Bottoming HSS Brt ISO529
T387 70 D0706 Tap, Straight Flute, N M Intermediate HSS TiN ISO529
T388 70 D0706 Tap, Straight Flute, N M Bottoming HSS TiN ISO529
T389 71 D0702 Tap, Straight Flute, N, Left Hand M Taper HSS Brt ISO529
T390 71 D0702 Tap, Straight Flute, N, Left Hand M Intermediate HSS Brt ISO529
T391 72 D0702 Tap, Straight Flute, N, Left Hand M Bottoming HSS Brt ISO529
T392 72 D0702 Tap, Straight Flute, N, Oversize M Bottoming HSS Brt ISO529
T393 73 D0702 Tap, Gun, N M Intermediate HSSE Brt ISO529
T394 73 D0702 Tap, Gun, N M Intermediate HSSE Blu ISO529
T395 74 D0706 Tap, Gun, N M Intermediate HSSE TiN ISO529
T396 75 D0702 Tap, Spiral Flute, N M Bottoming HSSE Blu ISO529
T397 75 D0702 Tap, Spiral Flute, N M Bottoming HSSE Brt ISO529
T398 76 D0706 Tap, Spiral Flute, N M Bottoming HSSE TiN ISO529
T399 77 D0702 Tap, Forming, with single coolant groove M Short HSSE Brt ISO529
T400 77 D0706 Tap, Forming, with single coolant groove M Short HSSE TiN ISO529
T401 78 D0702 Tap, Straight Flute, N MF Taper HSS Brt ISO529
T402 78 D0702 Tap, Straight Flute, N MF Intermediate HSS Brt ISO529
T403 79 D0702 Tap, Straight Flute, N MF Bottoming HSS Brt ISO529
T404 80 D0706 Tap, Straight Flute, N MF Intermediate HSS TiN ISO529
T405 80 D0706 Tap, Straight Flute, N MF Bottoming HSS TiN ISO529
T406 81 D0702 Tap, Gun, N MF Intermediate HSSE Brt ISO529
T407 81 D0702 Tap, Gun, N MF Intermediate HSSE Blu ISO529
T408 82 D0706 Tap, Gun, N MF Intermediate HSSE TiN ISO529
7
Product Index
Taps
Catalogue Discount Geometry Tool Surface
Page No. Description Thread Standard
Code Group Type Material Finish
T409 83 D0702 Tap, Spiral Flute, N MF Bottoming HSSE Brt ISO529
T411 83 D0706 Tap, Spiral Flute, N MF Bottoming HSSE TiN ISO529
T414 84 D0702 Tap, Straight Flute, N UNC Taper HSS Brt ISO529
T415 84 D0702 Tap, Straight Flute, N UNC Intermediate HSS Brt ISO529
T416 85 D0702 Tap, Straight Flute, N UNC Bottoming HSS Brt ISO529
T417 86 D0706 Tap, Straight Flute, N UNC Intermediate HSS TiN ISO529
T418 86 D0706 Tap, Straight Flute, N UNC Bottoming HSS TiN ISO529
T419 87 D0702 Tap, Straight Flute, N, Left Hand UNC Taper HSS Brt ISO529
T420 87 D0702 Tap, Straight Flute, N, Left Hand UNC Intermediate HSS Brt ISO529
T421 88 D0702 Tap, Straight Flute, N, Left Hand UNC Bottoming HSS Brt ISO529
T422 89 D0702 Tap, Gun, N UNC Intermediate HSSE Brt ISO529
T423 89 D0702 Tap, Gun, N UNC Intermediate HSSE Blu ISO529
T424 90 D0706 Tap, Gun, N UNC Intermediate HSSE TiN ISO529
T425 91 D0702 Tap, Spiral Flute, N UNC Bottoming HSSE Brt ISO529
T426 91 D0702 Tap, Spiral Flute, N UNC Bottoming HSSE Blu ISO529
T427 92 D0706 Tap, Spiral Flute, N UNC Bottoming HSSE TiN ISO529
T428 93 D0702 Tap, Forming, with single coolant groove UNC Short HSSE Brt ISO529
T429 93 D0706 Tap, Forming, with single coolant groove UNC Short HSSE TiN ISO529
T430 94 D0702 Tap, Machine Nut, Long Shank UNC Bottoming HSS Brt BS 949
T431 95 D0702 Tap, Straight Flute, N UNF Taper HSS Brt ISO529
T432 95 D0702 Tap, Straight Flute, N UNF Intermediate HSS Brt ISO529
T433 96 D0702 Tap, Straight Flute, N UNF Bottoming HSS Brt ISO529
T434 97 D0706 Tap, Straight Flute, N UNF Intermediate HSS TiN ISO529
T435 97 D0706 Tap, Straight Flute, N UNF Bottoming HSS TiN ISO529
T436 98 D0702 Tap, Straight Flute, N, Left Hand UNF Taper HSS Brt ISO529
T437 98 D0702 Tap, Straight Flute, N, Left Hand UNF Intermediate HSS Brt ISO529
T438 99 D0702 Tap, Straight Flute, N, Left Hand UNF Bottoming HSS Brt ISO529
T439 102 D0702 Tap, Gun, N UNF Intermediate HSSE Brt ISO529
T440 102 D0702 Tap, Gun, N UNF Intermediate HSSE Blu ISO529
T441 103 D0706 Tap, Gun, N UNF Intermediate HSSE TiN ISO529
T442 104 D0702 Tap, Spiral Flute, N UNF Bottoming HSSE Brt ISO529
T443 104 D0706 Tap, Spiral Flute, N UNF Bottoming HSSE TiN ISO529
T444 105 D0702 Tap, Forming, with single coolant groove UNF Short HSSE Brt ISO529
T445 100 D0702 Tap, Straight Flute, N UNEF Taper HSS Brt ISO529
T446 100 D0702 Tap, Straight Flute, N UNEF Intermediate HSS Brt ISO529
T447 101 D0702 Tap, Straight Flute, N UNEF Bottoming HSS Brt ISO529
T448 106 D0702 Tap, Straight Flute, N 8UN Taper HSS Brt ISO529
T449 106 D0702 Tap, Straight Flute, N 8UN Intermediate HSS Brt ISO529
T450 107 D0702 Tap, Straight Flute, N 8UN Bottoming HSS Brt ISO529
T451 108 D0702 Tap, Straight Flute, N BSW Taper HSS Brt ISO529
T452 108 D0702 Tap, Straight Flute, N BSW Intermediate HSS Brt ISO529
T453 109 D0702 Tap, Straight Flute, N BSW Bottoming HSS Brt ISO529
T454 110 D0706 Tap, Straight Flute, N BSW Intermediate HSS TiN ISO529
T455 110 D0706 Tap, Straight Flute, N BSW Bottoming HSS TiN ISO529
T456 111 D0702 Tap, Straight Flute, N, Left Hand BSW Bottoming HSS Brt ISO529
8
Product Index
Taps
Catalogue Discount Geometry Tool Surface
Page No. Description Thread Standard
Code Group Type Material Finish
T457 112 D0702 Tap, Gun, N BSW Intermediate HSSE Brt ISO529
T458 112 D0702 Tap, Gun, N BSW Intermediate HSSE Blu ISO529
T459 113 D0706 Tap, Gun, N BSW Intermediate HSSE TiN ISO529
T460 114 D0702 Tap, Spiral Flute, N BSW Bottoming HSSE Brt ISO529
T461 114 D0702 Tap, Spiral Flute, N BSW Bottoming HSSE Blu ISO529
T462 115 D0706 Tap, Spiral Flute, N BSW Bottoming HSSE TiN ISO529
T463 116 D0702 Tap, Forming, with single coolant groove BSW Short HSSE Brt ISO529
T464 116 D0706 Tap, Forming, with single coolant groove BSW Short HSSE TiN ISO529
T465 117 D0702 Tap, Machine Nut, Long Shank BSW Bottoming HSS Brt BS 949
T466 118 D0702 Tap, Straight Flute, N BSF Taper HSS Brt ISO529
T467 118 D0702 Tap, Straight Flute, N BSF Intermediate HSS Brt ISO529
T468 119 D0702 Tap, Straight Flute, N BSF Bottoming HSS Brt ISO529
T469 118 D0702 Tap, Straight Flute, N BA Taper HSS Brt ISO529
T470 118 D0702 Tap, Straight Flute, N BA Intermediate HSS Brt ISO529
T471 119 D0702 Tap, Straight Flute, N BA Bottoming HSS Brt ISO529
T472 118 D0702 Tap, Straight Flute, N BSB Taper HSS Brt ISO529
T473 118 D0702 Tap, Straight Flute, N BSB Intermediate HSS Brt ISO529
T474 119 D0702 Tap, Straight Flute, N BSB Bottoming HSS Brt ISO529
T475 123 D0702 Tap, Straight Flute, Pipe Rc (BSPT) Bottoming HSS Brt ISO2284
T476 123 D0706 Tap, Straight Flute, Pipe Rc (BSPT) Bottoming HSS TiN ISO2284
T477 123 D0702 Tap, Straight Flute, Pipe Rp (BSPPL) Bottoming HSS Brt ISO2284
T478 123 D0702 Tap, Straight Flute, Pipe Pg Bottoming HSS Brt ISO529
T479 120 D0702 Tap, Straight Flute, Pipe G (BSPF) Taper HSS Brt ISO2284
T480 120 D0702 Tap, Straight Flute, Pipe G (BSPF) Intermediate HSS Brt ISO2284
T481 121 D0702 Tap, Straight Flute, Pipe G (BSPF) Bottoming HSS Brt ISO2284
T482 122 D0706 Tap, Straight Flute, Pipe G (BSPF) Intermediate HSS TiN ISO2284
T483 122 D0706 Tap, Straight Flute, Pipe G (BSPF) Bottoming HSS TiN ISO2284
T484 120 D0702 Tap, Gun, Pipe G (BSPF) Intermediate HSS Brt ISO529
T485 121 D0702 Tap, Spiral Flute, Pipe G (BSPF) Bottoming HSS Brt ISO529
T486 124 D0702 Tap, Straight Flute, Pipe NPSF Bottoming HSS Colour Temp ANSI B94-9
T487 124 D0702 Tap, Straight Flute, Pipe NPT Bottoming HSS Colour Temp ANSI B94-9
T488 124 D0702 Tap, Straight Flute, Pipe NPTF Bottoming HSS Colour Temp ANSI B94-9
T489 101 D0702 Tap, Straight Flute, Tyre Valve Tyre valve Bottoming HSS Brt ISO529
T490 101 D0702 Tap, Straight Flute, Stitching Stitching Bottoming HSS Brt ISO529
T637 77 D0702 Tap, Forming, with single coolant groove MF Short HSSE Brt ISO529
T901 69 D0702 Set, Tap, 3 piece M Taper/Inter/Bott HSS Brt ISO529
T902 79 D0702 Set, Tap, 3 piece MF Taper/Inter/Bott HSS Brt ISO529
T903 85 D0702 Set, Tap, 3 piece UNC Taper/Inter/Bott HSS Brt ISO529
T904 96 D0702 Set, Tap, 3 piece UNF Taper/Inter/Bott HSS Brt ISO529
T905 109 D0702 Set, Tap, 3 piece BSW Taper/Inter/Bott HSS Brt ISO529
T906 119 D0702 Set, Tap, 3 piece BSF Taper/Inter/Bott HSS Brt ISO529
T907 119 D0702 Set, Tap, 3 piece BA Taper/Inter/Bott HSS Brt ISO529
T908 119 D0702 Set, Tap, 3 piece BSB Taper/Inter/Bott HSS Brt ISO529
T909 121 D0702 Set, Tap, 3 piece G (BSPF) Taper/Inter/Bott HSS Brt ISO529
T910 107 D0702 Set, Tap, 3 piece 8UN Taper/Inter/Bott HSS Brt ISO529
9
Application Guide
for aluminiums
S S Titaniums & Super Alloys Ti Ni
for titaniums
H H Hard Materials (≥ 45 HRC) H
for nickels
^ VDI
3323 material groups can also be determined by referring to
the material cross reference listing in the application guide at the
back of this catalogue.
N UNI AI W Cu VA GG H XH VH Ti Ni
ISO VDI^ Material Condition HB N/mm2
3323
1 Steel - Non-alloy,
cast & free cutting
~ 0.15 %C A 125 440 • • • •
2 ~ 0.45 %C A 190 640 • • • •
3 QT 250 840 • • • • •
4 ~ 0.75 %C A 270 910 • • • • •
5 QT 300 1010 • • •
6 Steel - Low alloy & cast
< 5% of alloying elements
A 180 610 • • • •
P 7 QT 275 930 • • • • •
8 QT 300 1010 • • •
9 QT 350 1180 • • • •
10 Steel - High alloy, cast & tool A 200 680 • • • •
11 HT 325 1100 • • • •
12 Steel - Corrosion
resistant & cast
Ferritic / Martensitic A 200 680 • • •
13 Martensitic QT 240 810 • • • • •
14.1 Stainless Steel Austenitic AH 180 610 • •
M 14.2 Duplex 250 840 • • •
14.3 Precipitation Hardening 250 840 • • • •
15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610 • • • •
16 Pearlitic 260 880 • • • •
K
17 Cast Iron - Nodular
(GGG)
Ferritic 160 570 • • • •
18 Pearlitic 250 840 • • • •
19 Cast Iron - Malleable Ferritic 130 460 • • • •
20 Pearlitic 230 780 • • • •
21 Aluminum & Magnesium Non Heat Treatable
- wrought alloy
60 210 • • • • • •
22 Heat Treatable AH 100 360 • • • • • •
23 Aluminum & Magnesium Non Heat Treatable
- cast alloy ≤12% Si
75 270 • • • • • •
24 Heat Treatable AH 90 320 • • • • • •
N
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460 • • • • • •
26 Copper & Cu alloys
(Brass/Bronze)
Free cutting, Pb > 1% 110 390 • • • • • •
27 Brass (CuZn, CuSnZn) 90 320 • • • • • • • •
28 Bronze (CuSn) 100 360 • • • • •
29 Non-metallic - Thermosetting & fiber-reinforced plastics •
30 Non-metallic - Hard rubber, wood etc.
31 High temp. alloys Fe based A 200 680 • •
32 AH 280 950 • •
33 Ni / Co based A 250 840 • • •
34 AH 350 1180 •
35 C 320 1080 •
S 36 Titanium & Ti alloys CP Titanium 400 MPa •
37.1 Alpha alloys 860 MPa • •
37.2 Alpha / Beta
alloys
A 960 MPa •
37.3 AH 1170 MPa •
37.4 Beta alloys A 830 MPa •
37.5 AH 1400 MPa •
38.1 Hardened steel HT 45 HRC • • • •
38.2 HT 55 HRC •
H
39.1 HT 58 HRC •
39.2 HT 62 HRC •
40 Cast Iron Chilled C 400 1350 • • • • •
41 HT 55 HRC •
Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)
• Optimal • Effective
10
Expert Tool Selector
Sutton Tools Expert Tool Selector enables easy tool selection for your machining
task. The Expert Tool Selector will recommend the right tool for your application,
with advice on suitable cutting parameters. Simply select your work piece
material, and enter your machining operation and setup to get the best advice
in 5 easy steps:
www.suttontools.com/expert-tool-selector
12
DRILLS
• Stub Series • Jobber Series • Long Series
• Extra Long Series • Spotting • Tool Bits
Drills Finder
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI 3323 material groups can also be determined by referring
to the material cross reference listing in the application guide
at the back of this catalogue.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
Catalogue Code D101 D102 D103 D179 D109 D180 D186 D100/D126 D113 D187
Material HSS HSS Co HSS HSS HSS HSS HSS
Surface Finish Brt Blu TiN TiAlN Tip Colour Tmp TiAlN Tip Blu Blu Blu Brt
Sutton Designation N Hard Mat. VA N N N N
Standard DIN 338 DIN 338 ~ DIN 338 DIN 1897 ANSI B94-11 ANSI B94-11 ANSI B94-11
Depth of Cut ≤ 5xØ ≤ 5xØ ≤ 3xØ ≤ 3xØ ≤ 3xØ 8xØ ≤ 5xØ
Shank Tolerance h9 - h9 - - h9 -
ISO VDI^ Material Condition HB N/mm2
3323
14 • Optimal • Effective
45 46 49 50 51 51 52 52 53 53 53 53 54 55 55 56 56
D202 D115 D141 D140 D142 D118 D120 D188 D121 D122 D124 D125 D130 M301 M302 M300 M304
HSS Co HSS HSS Co HSS - Alloy HSS HSS HSS HSS Co M2 HSS M42 CoHSS M2 HSS M42 CoHSS
Colour Tmp Blu Colour Tmp Blu Brt Brt Blu Brt Blu Colour Tmp Brt Brt
N N Tough N Adaptor N Non Ferrous Ferrous Tough - -
Materials Steels
DIN 338 DIN 345 DIN 345 DIN 341 - - - - - - -
≤ 5xØ ≤ 5xØ ≤ 5xØ ≤ 8xØ - ≤ 5xØ - - - - -
- - - - - - - - - - -
VDI^ ISO
3323
• • • • • • • • • • • 1
• • • • • • • • • • • 2
• • • • • • • • • • • 3
• • • • • • • • • • • 4
• • • • • • 5
• • • • • • • • • • • 6
• • • • • • • • • 7 P
• • • • • • 8
• 9
• • • • • • • • • 10
• 11
• • 12
• 13
• • • • • • • • • • 14.1
• • • • • • • • • 14.2 M
• 14.3
• • • • • • • • • • • 15
• • • 16
• • • • • • • • • • • 17
K
• • • 18
• • • • • • 19
• • • • 20
• • • • • • 21
• • • • • • 22
• • • • • • 23
• • • • • • 24
• 25
N
• • • • • • 26
• • • • 27
• • • • • • 28
• 29
30
31
32
33
34
35
36 S
37.1
37.2
37.3
37.4
37.5
38.1
38.2
39.1
H
39.2
• • • • • • • • • • • 40
41
Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)
• Optimal • Effective 15
Drills Sets - Metric
D101 SM1 D101 SM2 D101 SM3 D101 MTLSM2 D101 MTLSM3
D102 SM1 D102 SM2 D102 SM3 D102 SM8 D102 SM30 D102 SM41
D103 SM3 D105 SLV7M D105 SLV10M D105 SLV13M D105 V2M D105 V3M
D109 SM2 D109 SM3 D179 SM2 D179 SM3 D180 SM2 D180 SM3
16
Drills Sets - Metric
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • • • • •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • • •
• • •
• • • •
• • •
• • •
• • •
• •
• •
• • •
D103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• • •
• •
D105
•
•
• •
• •
•
• •
• •
D109
•
•
•
•
•
•
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
• •
•
• •
• •
D180
•
•
•
•
•
•
•
•
•
•
•
•
•
P M K N S H • Optimal • Effective
17
Steel Stainless Steel Cast Iron Non-Ferrous Metals Titanium & Super Alloys Hard Materials
Drills Sets - Imperial
D101 S31 D101 SRK1 D101 SRK2 D101 SRK3 D101 SRK20 D101 S7
18
Drills Sets - Imperial
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • • • • •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • • •
• • •
• • • •
• • •
• • •
• • •
• •
• •
• • •
D103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• • •
• •
D105
•
•
• •
• •
•
• •
• •
D109
•
•
•
•
•
•
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
19
20 20
Drills Jobber, Silver & Blue Bullet
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
Merchandisers
DMB25M Metric Bulk Drill Bits (405 Pieces) D101 MER405 $3,702.00 D102 MER405 $3,702.00
20 each: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 8.0mm
10 each: 7.0, 7.5, 8.5, 9.0, 9.5, 10.0, 13.0mm
5 each: 10.5, 11.0, 11.5, 12.0, 12.5mm
DMB29 Imperial Bulk Drill Bits (375 Pieces) D101 MER375 $3,350.95 D102 MER375 $3,350.95
20 each: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 1/4, 5/16
10 each: 13/64, 7/32, 15/64, 17/64, 9/32, 19/64, 21/64, 11/32, 23/64, 3/8, 7/16, 1/2
5 each: 25/64, 13/32, 27/64, 29/64, 15/32, 31/64
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
D102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
A C
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
A C
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
A C
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
A C
•
•
•
•
•
•
•
• •
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
A C
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
D179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D109
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D109
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
34
35
Drills Jobber, R40, INOX
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D180
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D180
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D186
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
37
Drills Stub, Blu
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D186
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
38
39
Drills Stub, Blu
D126
0326 3.26 #30 49 24 D126 0326 $3.67
0409 4.09 #20 54 27 D126 0409 $4.76
0485 4.85 #11 57 30 D126 0485 $7.00
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D100
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
• •
• •
D126
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
39
40
Drills Long Series
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D113
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
40
Drills Long Series
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D113
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
41
Drills Long Series
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D113
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
42
Drills Long Series
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D113
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
43
Drills Extra Long Reach
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D187
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
44
Drills Left Hand Cobalt
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D202
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
45
46
Drills Morse Taper Shank
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D115
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
46
Drills Morse Taper Shank
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D115
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D115
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D141
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
49
50
Drills Morse Taper Shank, Long Series
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D140
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
*The use of sizes where inside taper is shown in brackets should be avoided wherever possible 51
52 52
Drills Reduced Shank
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D120
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
• •
D188
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
52
53 53
Drills Panel, Single Ended
53 53
Drills Panel, Double Ended
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D121 / D123
•
•
•
•
• • • •
• • • •
• • • •
• • • •
• • • •
•
•
•
•
• •
• •
• • • •
D122
•
•
•
•
•
•
•
•
D124 / D126
•
•
•
•
• •
• •
D125
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective 53
54 54
54
Drills Panel, Double Ended
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
D127
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
• • •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• • •
D128
•
•
•
•
•
•
•
•
•
•
•
• •
•
• •
D130
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
54
Tool Bits Turning & Machining
M2 HSS
- Recommended for turning or machining of low-alloy and free-machining steels
and most non-ferrous materials.
M42 CoHSS
- Can withstand high cutting speeds
- Especially suited to production turning of high alloy steels and other materials
55
56 56
Tool Bits Turning & Machining
M2 HSS
- Recommended for turning or machining of low-alloy and free-machining steels
and most non-ferrous materials.
M42 CoHSS
- Can withstand high cutting speeds
- Especially suited to production turning of high alloy steels and other materials
56
COUNTERSINKS
• Counterbores • Cross Hole • Single Flute • Three Flute
Smooth Cutting…
Perfect Chamfering
Catalogue Code: C108 Features
This new generation of countersink applies the three most important • 5% Cobalt grade
areas for optimal tool life in its design. High Speed Steel
• TiAlN Futura coated
Constant rake angle along the entire cutting face, latest developments
• Constant flute rake along entire
in coating & superior tool material.
cutting face
• De-burring • Axial and radial adjusted relief
• Countersinking / Counterboring screw holes • Higher dimensional precision
• Chamfering of tapping holes • Improved and sharper cutting edge
• For use in machine applications
Benefits
• Chatter-free countersinking and
de-burring
• Longer lasting
• Excellent chip flow
Countersinks Finder
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI 3323 material groups can also be determined by referring
to the material cross reference listing in the application guide
at the back of this catalogue.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
• Optimal • Effective 59
60 60
Countersinks Three Flute, 90°
- Countersinking tool
- For machine use
- For use on most materials including plastics, non-ferrous & ferrous metals
Set
STF1 0901, 0902, 0903, 0904 4 C105 STF1 $365.93
STF1T 0901, 0902, 0903, 0904 4 C106 STF1T $461.05
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
C105
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
C106
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
60
61 61
Countersinks Single Flute, 90°
- Countersinking tool
- For use in portable drills or drilling machines
- For use on most materials including plastics, non-ferrous & ferrous metals
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
C103
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
C104
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
61
62 62
Countersinks Deburring Cross Hole, 90°
- Deburring tool
- Smooth cutting action
Set
SC1 0901, 0902, 0903, 0904, 0905 5 C101 SC1 $402.10
SC1T 0901, 0902, 0903, 0904, 0905 5 C102 SC1T $499.75
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
C101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
• •
C102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
62
63
Countersinks Counterbore
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
C100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
63
64
ISO TAPS
• M, MF • UNC, UNF, UNEF, UN, UNS • BSW, BSF, BA, BSB
• Rc (BSPT), Rp (BSPPL), Pg Series, G (BSPF) • NPT, NPTF, NPSF
Special Taps
Express Delivery Service…
Sutton Tools is a leading international Manufacturer of specialist Within 24 hours*
cutting tools and is renowned for producing high performance, • Straight Flute Taps M3 to M127
precision cutting tools specifically designed to individual customer • Spiral Taps M3 to M36
requirements.
Within 48 Hours*
With comprehensive customer service and warehouse facilities, • Gun Taps M3 to M36
our Express Delivery Service enables us to meet your requirements
more efficiently than ever before. Within 5 Working Days*
Surface Finishes and Treatments:
All Thread Forms • Steam Oxide
UN, Metric, UNJC, UNJF, MJ, UH, Pg, • Gas Nitride
Whit, Rope forms & Acme and more!! • Titanium Nitride
With our state of the art CNC grinding equipment almost any profile • Chromium Nitride
can be achieved. Feel free to discuss these with our Tech team. • Titanium Carbo-Nitride
• Titanium Aluminum Nitride
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI 3323 material groups can also be determined by
referring to the material cross reference listing in the
application guide at the back of this catalogue.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
K
17 Cast Iron - Nodular Ferritic 160 570 • • • • • • • • • • • • • •
(GGG)
18 Pearlitic 250 840 • • • • • •
19 Cast Iron - Malleable Ferritic 130 460 • • • • • • • • • • •
20 Pearlitic 230 780
21 Aluminum & Magnesium Non Heat Treatable 60 210 • • • • • • • • • • • • • •
- wrought alloy
22 Heat Treatable AH 100 360 • • • • • • • • • • • • • •
23 Aluminum & Magnesium Non Heat Treatable 75 270 • • • • • • • • • • • • • •
- cast alloy ≤12% Si
24 Heat Treatable AH 90 320 • • • • • • • • • • • • • •
N
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460 • •
26 Copper & Cu alloys Free cutting, Pb > 1% 110 390 • • • • • • • • • • • • •
(Brass/Bronze)
27 Brass (CuZn, CuSnZn) 90 320 • • • • • • •
28 Bronze (CuSn) 100 360 • • • • • • • • • • •
29 Non-metallic - Thermosetting & fiber-reinforced plastics
30 Non-metallic - Hard rubber, wood etc.
31 High temp. alloys Fe based A 200 680
32 AH 280 950
33 Ni / Co based A 250 840
34 AH 350 1180
35 C 320 1080
S 36 Titanium & Ti alloys CP Titanium 400 MPa
37.1 Alpha alloys 860 MPa
37.2 Alpha / Beta A 960 MPa
alloys
37.3 AH 1170 MPa
37.4 Beta alloys A 830 MPa
37.5 AH 1400 MPa
38.1 Hardened steel HT 45 HRC
38.2 HT 55 HRC
39.1 HT 58 HRC
H
39.2 HT 62 HRC
40 Cast Iron Chilled C 400 1350 • • • • • •
41 HT 55 HRC
Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)
• Optimal • Effective 67
68
ISO Taps Metric, Straight Flute, N
0250 M 2.5 x 0.45 45 10 - 2.80 2.24 5 3 2.05 T384 0250 $31.77 T385 0250 $31.77
0300 M 3 x 0.5 48 11 15 3.15 2.50 5 3 2.5 T384 0300 $23.80 T385 0300 $23.80
0350 M 3.5 x 0.6 50 13 17.5 3.55 2.80 5 3 2.9 T384 0350 $24.92 T385 0350 $24.92
0400 M 4 x 0.7 53 13 18 4.00 3.15 6 3 3.3 T384 0400 $20.65 T385 0400 $20.65
0450 M 4.5 x 0.75 53 13 19 4.50 3.55 6 3 3.7 T384 0450 $26.90 T385 0450 $26.90
0500 M 5 x 0.8 58 16 22 5.00 4.00 7 3 4.2 T384 0500 $22.99 T385 0500 $22.99
0600 M6 x 1 66 19 26 6.30 5.00 8 3 5.0 T384 0600 $23.80 T385 0600 $23.80
0700 M7 x 1 66 19 26 7.10 5.60 8 4 6.0 T384 0700 $28.54 T385 0700 $28.54
0800 M 8 x 1.25 72 22 30 8.00 6.30 9 4 6.8 T384 0800 $24.92 T385 0800 $24.92
0900 M 9 x 1.25 72 22 31 9.00 7.10 10 4 7.8 T384 0900 $40.83 T385 0900 $40.83
1000 M 10 x 1.5 80 24 34 10.00 8.00 11 4 8.5 T384 1000 $33.92 T385 1000 $33.92
1100 M 11 x 1.5 85 25 - 8.00 6.30 9 4 9.5 T384 1100 $51.88 T385 1100 $51.88
1200 M 12 x 1.75 89 29 - 9.00 7.10 10 4 10.2 T384 1200 $50.24 T385 1200 $50.24
1400 M 14 x 2 95 30 - 11.20 9.00 12 4 12.0 T384 1400 $63.41 T385 1400 $63.41
1600 M 16 x 2 102 32 - 12.50 10.00 13 4 14.0 T384 1600 $76.80 T385 1600 $76.80
1800 M 18 x 2.5 112 37 - 14.00 11.20 14 4 15.5 T384 1800 $119.12 T385 1800 $119.12
2000 M 20 x 2.5 112 37 - 14.00 11.20 14 4 17.5 T384 2000 $132.52 T385 2000 $132.52
2200 M 22 x 2.5 118 38 - 16.00 12.50 16 4 19.5 T384 2200 $149.81 T385 2200 $149.81
2400 M 24 x 3 130 45 - 18.00 14.00 18 4 21.0 T384 2400 $172.85 T385 2400 $172.85
2700 M 27 x 3 135 45 - 20.00 16.00 20 4 24.0 T384 2700 $265.07 T385 2700 $265.07
3000 M 30 x 3.5 138 48 - 20.00 16.00 20 4 26.5 T384 3000 $295.82 T385 3000 $295.82
3300 M 33 x 3.5 151 51 - 22.40 18.00 22 4 29.5 T384 3300 $388.20 T385 3300 $388.20
3600 M 36 x 4 162 57 - 25.00 20.00 24 4 32.0 T384 3600 $449.42 T385 3600 $449.42
3900 M 39 x 4 170 60 - 28.00 22.40 26 4 35.0 T384 3900 $537.85 T385 3900 $537.85
4200 M 42 x 4.5 170 60 - 28.00 22.40 26 4 37.5 T384 4200 $614.67 T385 4200 $614.67
4500 M 45 x 4.5 187 67 - 31.50 25.00 28 4 40.5 T384 4500 $795.47 T385 4500 $795.47
4800 M 48 x 5 187 67 - 31.50 25.00 28 4 43.0 T384 4800 $849.00 T385 4800 $849.00
5200 M 52 x 5 200 70 - 35.50 28.00 31 4 47.0 T384 5200 $1,045.01 T385 5200 $1,045.01
Tap & Drill Sets
0014 14 piece set (intermediate) T385 0014 $263.79
Taps: M3, M4, M5, M6, M8, M10, M12
Drills: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2mm
T385 0014
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T384
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T385
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
68
ISO Taps Metric, Straight Flute, N
M
0250 M 2.5 x 0.45 45 10 - 2.80 2.24 5 3 2.05 T386 0250 $31.77 T901 0250 $95.33
0300 M 3 x 0.5 48 11 15 3.15 2.50 5 3 2.5 T386 0300 $23.80 T901 0300 $71.44
0350 M 3.5 x 0.6 50 13 17.5 3.55 2.80 5 3 2.9 T386 0350 $24.92 T901 0350 $74.75
0400 M 4 x 0.7 53 13 18 4.00 3.15 6 3 3.3 T386 0400 $20.65 T901 0400 $61.91
0450 M 4.5 x 0.75 53 13 19 4.50 3.55 6 3 3.7 T386 0450 $26.90 T901 0450 $80.72
0500 M 5 x 0.8 58 16 22 5.00 4.00 7 3 4.2 T386 0500 $22.99 T901 0500 $69.03
0600 M6 x 1 66 19 26 6.30 5.00 8 3 5.0 T386 0600 $23.80 T901 0600 $71.44
0700 M7 x 1 66 19 26 7.10 5.60 8 4 6.0 T386 0700 $28.54 T901 0700 $85.54
0800 M 8 x 1.25 72 22 30 8.00 6.30 9 4 6.8 T386 0800 $24.92 T901 0800 $74.75
0900 M 9 x 1.25 72 22 31 9.00 7.10 10 4 7.8 T386 0900 $40.83 T901 0900 $122.46
1000 M 10 x 1.5 80 24 34 10.00 8.00 11 4 8.5 T386 1000 $33.92 T901 1000 $101.78
1100 M 11 x 1.5 85 25 - 8.00 6.30 9 4 9.5 T386 1100 $51.88 T901 1100 $155.63
1200 M 12 x 1.75 89 29 - 9.00 7.10 10 4 10.2 T386 1200 $50.24 T901 1200 $150.71
1400 M 14 x 2 95 30 - 11.20 9.00 12 4 12.0 T386 1400 $63.41 T901 1400 $190.15
1600 M 16 x 2 102 32 - 12.50 10.00 13 4 14.0 T386 1600 $76.80 T901 1600 $230.35
1800 M 18 x 2.5 112 37 - 14.00 11.20 14 4 15.5 T386 1800 $119.12 T901 1800 $357.33
2000 M 20 x 2.5 112 37 - 14.00 11.20 14 4 17.5 T386 2000 $132.52 T901 2000 $397.55
2200 M 22 x 2.5 118 38 - 16.00 12.50 16 4 19.5 T386 2200 $149.81 T901 2200 $449.49
2400 M 24 x 3 130 45 - 18.00 14.00 18 4 21.0 T386 2400 $172.85 T901 2400 $518.61
2700 M 27 x 3 135 45 - 20.00 16.00 20 4 24.0 T386 2700 $265.07 •
3000 M 30 x 3.5 138 48 - 20.00 16.00 20 4 26.5 T386 3000 $295.82 •
3300 M 33 x 3.5 151 51 - 22.40 18.00 22 4 29.5 T386 3300 $388.20 •
3600 M 36 x 4 162 57 - 25.00 20.00 24 4 32.0 T386 3600 $449.42 •
3900 M 39 x 4 170 60 - 28.00 22.40 26 4 35.0 T386 3900 $537.85 •
4200 M 42 x 4.5 170 60 - 28.00 22.40 26 4 37.5 T386 4200 $614.67 •
4500 M 45 x 4.5 187 67 - 31.50 25.00 28 4 40.5 T386 4500 $795.47 •
4800 M 48 x 5 187 67 - 31.50 25.00 28 4 43.0 T386 4800 $849.00 •
5200 M 52 x 5 200 70 - 35.50 28.00 31 4 47.0 T386 5200 $1,045.01 •
Tap & Drill Sets
SDT1 28 piece set (taper, inter, bott) (Discount Group Z0304) T901 SDT1 $664.44
Taps: M3, M4, M5, M6, M8, M10, M12
Drills: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2mm
T901 SDT1
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T386
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T901
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T387
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
T388
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
M
0400 M 4 x 0.7 53 13 18 4.00 3.15 6 3 3.3 T389 0400 $53.75 T390 0400 $53.75
0500 M 5 x 0.8 58 16 22 5.00 4.00 7 3 4.2 T389 0500 $53.75 T390 0500 $53.75
0600 M6 x 1 66 19 26 6.30 5.00 8 3 5.0 T389 0600 $56.90 T390 0600 $56.90
0800 M 8 x 1.25 72 22 30 8.00 6.30 9 4 6.8 T389 0800 $59.65 T390 0800 $59.65
1000 M 10 x 1.5 80 24 34 10.00 8.00 11 4 8.5 T389 1000 $72.92 T390 1000 $72.92
1200 M 12 x 1.75 89 29 - 9.00 7.10 10 4 10.2 T389 1200 $123.01 T390 1200 $123.01
1400 M 14 x 2 95 30 - 11.20 9.00 12 4 12.0 T389 1400 $110.12 T390 1400 $110.12
1600 M 16 x 2 102 32 - 12.50 10.00 13 4 14.0 T389 1600 $110.12 T390 1600 $110.12
1800 M 18 x 2.5 112 37 - 14.00 11.20 14 4 15.5 T389 1800 $129.90 T390 1800 $129.90
2000 M 20 x 2.5 112 37 - 14.00 11.20 14 4 17.5 T389 2000 $167.22 T390 2000 $167.22
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T389
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T390
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
71
ISO Taps Metric, Straight Flute, N, Left Hand
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T391
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T392
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
72
73 73
ISO Taps Metric, Gun, N
M
0300 M 3 x 0.5 48 11 15 3.15 2.50 5 3 2.5 T393 0300 $31.12 T394 0300 $31.12
0350 M 3.5 x 0.6 50 13 17.5 3.55 2.80 5 3 2.9 T393 0350 $31.12 T394 0350 $31.12
0400 M 4 x 0.7 53 13 18 4.00 3.15 6 3 3.3 T393 0400 $25.83 T394 0400 $25.83
0500 M 5 x 0.8 58 16 22 5.00 4.00 7 3 4.2 T393 0500 $28.85 T394 0500 $28.85
0600 M6 x 1 66 19 26 6.30 5.00 8 3 5.0 T393 0600 $29.64 T394 0600 $29.64
0800 M 8 x 1.25 72 22 30 8.00 6.30 9 3 6.8 T393 0800 $31.93 T394 0800 $31.93
1000 M 10 x 1.5 80 24 34 10.00 8.00 11 3 8.5 T393 1000 $42.38 T394 1000 $42.38
1200 M 12 x 1.75 89 29 - 9.00 7.10 10 3 10.2 T393 1200 $70.25 T394 1200 $70.25
1400 M 14 x 2 95 30 - 11.20 9.00 12 3 12.0 T393 1400 $91.11 T394 1400 $91.11
1600 M 16 x 2 102 32 - 12.50 10.00 13 3 14.0 T393 1600 $112.94 T394 1600 $112.94
1800 M 18 x 2.5 112 37 - 14.00 11.20 14 4 15.5 T393 1800 $153.76 T394 1800 $153.76
2000 M 20 x 2.5 112 37 - 14.00 11.20 14 4 17.5 T393 2000 $196.00 T394 2000 $196.00
2200 M 22* x 2.5 118 38 - 16.00 12.50 16 4 19.5 • T394 2200 $210.39
2400 M 24* x 3 130 45 - 18.00 14.00 18 4 21.0 • T394 2400 $255.29
3000 M 30* x 3.5 138 48 - 20.00 16.00 20 4 26.5 • T394 3000 $437.66
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T393
•
•
•
•
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
•
•
• •
T394
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T395
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
M
0300 M 3 x 0.5 48 6 15 3.15 2.50 5 3 2.5 T397 0300 $41.09 T396 0300 $41.09
0350 M 3.5 x 0.6 50 6 17.5 3.55 2.80 5 3 2.9 T397 0350 $44.04 T396 0350 $44.04
0400 M 4 x 0.7 53 7 18 4.00 3.15 6 3 3.3 T397 0400 $31.93 T396 0400 $31.93
0500 M 5 x 0.8 58 8 22 5.00 4.00 7 3 4.2 T397 0500 $35.67 T396 0500 $35.67
0600 M6 x 1 66 10 26 6.30 5.00 8 3 5.0 T397 0600 $36.94 T396 0600 $36.94
0800 M 8 x 1.25 72 13 30 8.00 6.30 9 3 6.8 T397 0800 $40.07 T396 0800 $40.07
1000 M 10 x 1.5 80 15 34 10.00 8.00 11 3 8.5 T397 1000 $56.90 T396 1000 $56.90
1200 M 12 x 1.75 89 18 - 9.00 7.10 10 3 10.2 T397 1200 $89.10 T396 1200 $89.10
1400 M 14 x 2 95 20 - 11.20 9.00 12 3 12.0 T397 1400 $114.07 T396 1400 $114.07
1600 M 16 x 2 102 20 - 12.50 10.00 13 3 14.0 T397 1600 $142.28 T396 1600 $142.28
1800 M 18 x 2.5 112 25 - 14.00 11.20 14 4 15.5 T397 1800 $192.14 T396 1800 $192.14
2000 M 20 x 2.5 112 25 - 14.00 11.20 14 4 17.5 T397 2000 $242.04 T396 2000 $242.04
2200 M 22* x 2.5 118 38 - 16.00 12.50 16 4 19.5 T397 2200 $263.73 •
2400 M 24* x 3 130 45 - 18.00 14.00 18 4 21.0 T397 2400 $305.80 •
3000 M 30* x 3.5 138 48 - 20.00 16.00 20 4 26.5 T397 3000 $264.69 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T397
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
•
•
•
• •
T396
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T398
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
M
0300 M 3 x 0.5 48 11 15 3.15 2.50 5 - 2.8 T399 0300 $78.43 T400 0300 $83.90
0350 M 3.5 x 0.6 50 13 17.5 3.55 2.80 5 - 3.2 T399 0350 $76.17 •
0400 M 4 x 0.7 53 13 18 4.00 3.15 6 - 3.7 T399 0400 $78.43 T400 0400 $83.90
0500 M 5 x 0.8 58 16 22 5.00 4.00 7 - 4.6 T399 0500 $85.22 T400 0500 $91.16
0600 M6 x 1 66 19 26 6.30 5.00 8 - 5.5 T399 0600 $85.22 T400 0600 $91.16
0800 M 8 x 1.25 72 22 30 8.00 6.30 9 - 7.4 T399 0800 $91.11 •
1000 M 10 x 1.5 80 24 34 10.00 8.00 11 - 9.3 T399 1000 $137.06 •
1200 M 12 x 1.75 89 29 - 9.00 7.10 10 - 11.2 T399 1200 $183.81 •
T637
1005 MF 10 x 1 80 24 34 10.00 8.00 11 - 9.5 T637 1005 $157.37 •
1206 MF 12 x 1.25 89 29 - 9.00 7.00 10 - 11.4 T637 1206 $183.81 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T399
•
•
•
•
• •
•
•
•
•
• •
• •
T400
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
• •
0604 MF 6 x 0.75 66 19 26 6.3 5.0 8 4 5.3 • •
0805 MF 8 x 1* 72 22 30 8.0 6.3 9 4 7.0 T401 0805 $46.16 T402 0805 $46.16
0804 MF 8 x 0.75 72 22 30 8.0 6.3 9 4 7.3 • •
1004 MF 10 x 0.75 80 24 34 10.0 8.0 11 4 9.3 • •
1005 MF 10 x 1† 80 24 34 10.0 8.0 11 4 9.0 T401 1005 $63.49 T402 1005 $63.49
1006 MF 10 x 1.25* 80 24 34 10.0 8.0 11 4 8.8 T401 1006 $63.41 T402 1006 $63.41
1205 MF 12 x 1 89 29 - 9.0 7.1 10 4 11.0 T401 1205 $91.54 T402 1205 $91.54
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 4 10.8 T401 1206 $72.92 T402 1206 $72.92
1207 MF 12 x 1.5* 89 29 - 9.0 7.1 10 4 10.5 T401 1207 $72.92 T402 1207 $72.92
1405 MF 14 x 1 95 30 - 11.2 9.0 12 4 13.0 • •
1406 MF14 x 1.25† 95 30 - 11.2 9.0 12 4 12.8 T401 1406 $107.60 T402 1406 $107.60
1407 MF 14 x 1.5* 95 30 - 11.2 9.0 12 4 12.5 T401 1407 $107.60 T402 1407 $107.60
1605 MF 16 x 1 102 32 - 12.5 10.0 13 4 15.0 • •
1606 MF 16 x 1.25 102 32 - 12.5 10.0 13 4 14.8 • •
1607 MF 16 x 1.5* 102 32 - 12.5 10.0 13 4 14.5 T401 1607 $107.60 T402 1607 $107.60
1806 MF 18 x 1.25 112 37 - 14.0 11.2 14 4 16.8 • •
1807 MF 18 x 1.5* 112 37 - 14.0 11.2 14 4 16.5 T401 1807 $138.37 T402 1807 $138.37
2006 MF 20 x 1.25 112 37 - 14.0 11.2 14 4 18.8 • •
2007 MF 20 x 1.5** 112 37 - 14.0 11.2 14 4 18.5 T401 2007 $173.06 T402 2007 $173.06
2008 MF 20 x 2* 112 37 - 14.0 11.2 14 4 18.0 • •
2207 MF 22 x 1.5 118 38 - 16.0 12.5 16 4 20.5 T401 2207 $207.35 T402 2207 $207.35
2208 MF 22 x 2 118 38 - 16.0 12.5 16 4 20.0 • •
2407 MF 24 x 1.5 130 45 - 18.0 14.0 18 4 22.5 • •
2408 MF 24 x 2* 130 45 - 18.0 14.0 18 4 22.0 T401 2408 $253.74 T402 2408 $253.74
2507 MF 25 x 1.5** 130 45 - 18.0 14.0 18 4 23.5 T401 2507 $186.80 T402 2507 $186.80
2708 MF 27 x 2 135 45 - 20.0 16.0 20 4 25.0 • •
3007 MF 30 x 1.5 138 48 - 20.0 16.0 20 4 28.5 T401 3007 $264.69 T402 3007 $264.69
3008 MF 30 x 2 138 48 - 20.0 16.0 20 4 28.0 T401 3008 $264.69 T402 3008 $264.69
3207 MF 32 x 1.5** 151 51 - 22.4 18.0 22 4 30.5 T401 3207 $264.69 T402 3207 $264.69
4007 MF 40 x 1.5** 170 60 - 28.0 22.4 26 4 38.5 T401 4007 $407.61 T402 4007 $407.61
Spark Plug
1005 MF 10 x 1† 80 24 34 10.0 8.0 11 4 9.0 T401 1005 $63.49 T402 1005 $63.49
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 4 10.8 T401 1206 $72.92 T402 1206 $72.92
1406 MF 14 x 1.25† 95 30 - 11.2 9.0 12 4 12.8 T401 1406 $107.60 T402 1406 $107.60
1807 MF 18 x 1.5 112 37 - 14.0 11.2 14 4 16.5 T401 1807 $138.37 T402 1807 $138.37
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T401
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T402
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
78 * Alternative Metric Fine ** Conduit Metric • Available on request as special manufacture. Subject to lead time. †
Limit & Nut Tolerance: ISO 1 / 4H
ISO Taps Metric Fine, Straight Flute, N
MF
MF 5 x 0.5 58 16 22 5.0 4.0 7 4 4.5 T403 0503 $42.07 •
0604 MF 6 x 0.75 66 19 26 6.3 5.0 8 4 5.3 T403 0604 $42.07 •
0805 MF 8 x 1* 72 22 30 8.0 6.3 9 4 7.0 T403 0805 $46.16 T902 0805 $138.48
0804 MF 8 x 0.75 72 22 30 8.0 6.3 9 4 7.3 T403 0804 $57.59 •
1004 MF 10 x 0.75 80 24 34 10.0 8.0 11 4 9.3 T403 1004 $78.31 •
1005 MF 10 x 1† 80 24 34 10.0 8.0 11 4 9.0 T403 1005 $63.49 T902 1005 $190.49
1006 MF 10 x 1.25* 80 24 34 10.0 8.0 11 4 8.8 T403 1006 $63.41 T902 1006 $190.15
1205 MF 12 x 1 89 29 - 9.0 7.1 10 4 11.0 T403 1205 $91.54 •
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 4 10.8 T403 1206 $72.92 T902 1206 $218.72
1207 MF 12 x 1.5* 89 29 - 9.0 7.1 10 4 10.5 T403 1207 $72.92 T902 1207 $218.72
1405 MF 14 x 1 95 30 - 11.2 9.0 12 4 13.0 T403 1405 $110.12 •
1406 MF14 x 1.25† 95 30 - 11.2 9.0 12 4 12.8 T403 1406 $107.60 T902 1406 $322.72
1407 MF 14 x 1.5* 95 30 - 11.2 9.0 12 4 12.5 T403 1407 $107.60 T902 1407 $322.74
1605 MF 16 x 1 102 32 - 12.5 10.0 13 4 15.0 T403 1605 $110.12 •
1606 MF 16 x 1.25 102 32 - 12.5 10.0 13 4 14.8 T403 1606 $110.12 •
1607 MF 16 x 1.5* 102 32 - 12.5 10.0 13 4 14.5 T403 1607 $107.60 T902 1607 $322.74
1806 MF 18 x 1.25 112 37 - 14.0 11.2 14 4 16.8 T403 1806 $129.90 •
1807 MF 18 x 1.5* 112 37 - 14.0 11.2 14 4 16.5 T403 1807 $138.37 T902 1807 $415.16
2006 MF 20 x 1.25 112 37 - 14.0 11.2 14 4 18.8 T403 2006 $167.22 •
2007 MF 20 x 1.5** 112 37 - 14.0 11.2 14 4 18.5 T403 2007 $173.06 T902 2007 $519.16
2008 MF 20 x 2* 112 37 - 14.0 11.2 14 4 18.0 T403 2008 $167.22 •
2207 MF 22 x 1.5 118 38 - 16.0 12.5 16 4 20.5 T403 2207 $207.35 T902 2207 $622.09
2208 MF 22 x 2 118 38 - 16.0 12.5 16 4 20.0 T403 2208 $167.22 •
2407 MF 24 x 1.5 130 45 - 18.0 14.0 18 4 22.5 T403 2407 $186.80 •
2408 MF 24 x 2* 130 45 - 18.0 14.0 18 4 22.0 T403 2408 $253.74 T902 2408 $761.21
2507 MF 25 x 1.5** 130 45 - 18.0 14.0 18 4 23.5 T403 2507 $186.80 •
2708 MF 27 x 2 135 45 - 20.0 16.0 20 4 25.0 T403 2708 $235.00 •
3007 MF 30 x 1.5 138 48 - 20.0 16.0 20 4 28.5 T403 3007 $264.69 •
3008 MF 30 x 2 138 48 - 20.0 16.0 20 4 28.0 T403 3008 $264.69 •
3207 MF 32 x 1.5** 151 51 - 22.4 18.0 22 4 30.5 T403 3207 $264.69 •
4007 MF 40 x 1.5** 170 60 - 28.0 22.4 26 4 38.5 T403 4007 $407.61 •
Spark Plug
1005 MF 10 x 1† 80 24 34 10.0 8.0 11 4 9.0 T403 1005 $63.49 T902 1005 $190.49
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 4 10.8 T403 1206 $72.92 T902 1206 $218.72
1406 MF 14 x 1.25† 95 30 - 11.2 9.0 12 4 12.8 T403 1406 $107.60 T902 1406 $322.72
1807 MF 18 x 1.5 112 37 - 14.0 11.2 14 4 16.5 T403 1807 $138.37 T902 1807 $415.16
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T403
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T902
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
* Alternative Metric Fine ** Conduit Metric • Available on request as special manufacture. Subject to lead time. †
Limit & Nut Tolerance: ISO 1 / 4H 79
80
ISO Taps Metric Fine, Straight Flute, N
• •
0604 MF 6 x 0.75 66 19 26 6.3 5.0 8 4 5.3 • •
0804 MF 8 x 0.75 72 22 30 8.0 6.3 9 4 7.3 • •
0805 MF 8 x 1* 72 22 30 8.0 6.3 9 4 7.0 T404 0805 $60.30 T405 0805 $60.30
1004 MF 10 x 0.75 80 24 34 10.0 8.0 11 4 9.3 • •
1005 MF 10 x 1† 80 24 34 10.0 8.0 11 4 9.0 T404 1005 $86.54 T405 1005 $86.54
1006 MF 10 x 1.25* 80 24 34 10.0 8.0 11 4 8.8 T404 1006 $86.54 T405 1006 $86.54
1205 MF 12 x 1 89 29 - 9.0 7.1 10 4 11.0 • •
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 4 10.8 T404 1206 $93.71 T405 1206 $93.71
1207 MF 12 x 1.5* 89 29 - 9.0 7.1 10 4 10.5 T404 1207 $93.71 T405 1207 $93.71
1405 MF 14 x 1 95 30 - 11.2 9.0 12 4 13.0 •
1406 MF 14 x 1.25† 95 30 - 11.2 9.0 12 4 12.8 T404 1406 $132.38 T405 1406 $132.38
1407 MF 14 x 1.5* 95 30 - 11.2 9.0 12 4 12.5 T404 1407 $132.38 T405 1407 $132.38
1605 MF 16 x 1 102 32 - 12.5 10.0 13 4 15.0 •
1606 MF 16 x 1.25 102 32 - 12.5 10.0 13 4 14.8 •
1607 MF 16 x 1.5* 102 32 - 12.5 10.0 13 4 14.5 • T405 1607 $132.38
1806 MF 18 x 1.25 112 37 - 14.0 11.2 14 4 16.8 •
1807 MF 18 x 1.5* 112 37 - 14.0 11.2 14 4 16.5 • •
2006 MF 20 x 1.25 112 37 - 14.0 11.2 14 4 18.8 •
2007 MF 20 x 1.5** 112 37 - 14.0 11.2 14 4 18.5 • •
2008 MF 20 x 2* 112 37 - 14.0 11.2 14 4 18.0 •
2207 MF 22 x 1.5 118 38 - 16.0 12.5 16 4 20.5 • •
2208 MF 22 x 2 118 38 - 16.0 12.5 16 4 20.0 •
2407 MF 24 x 1.5 130 45 - 18.0 14.0 18 4 22.5 •
2408 MF 24 x 2* 130 45 - 18.0 14.0 18 4 22.0 • •
2507 MF 25 x 1.5** 130 45 - 18.0 14.0 18 4 23.5 • •
2708 MF 27 x 2 135 45 - 20.0 16.0 20 4 25.0 •
3007 MF 30 x 1.5 138 48 - 20.0 16.0 20 4 28.5 •
3008 MF 30 x 2 138 48 - 20.0 16.0 20 4 28.0 • •
3207 MF 32 x 1.5** 151 51 - 22.4 18.0 22 4 30.5 • •
4007 MF 40 x 1.5** 170 60 - 28.0 22.4 26 4 38.5 • •
Spark Plug
1005 MF 10 x 1† 80 24 34 10.0 8.0 11 4 9.0 T404 1005 $86.54 T405 1005 $86.54
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 4 10.8 T404 1206 $93.71 T405 1206 $93.71
1406 MF 14 x 1.25† 95 30 - 11.2 9.0 12 4 12.8 T404 1406 $132.38 T405 1406 $132.38
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T404
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
T405
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
80 * Alternative Metric Fine ** Conduit Metric • Available on request as special manufacture. Subject to lead time. †
Limit & Nut Tolerance: ISO 1 / 4H
81 81
ISO Taps Metric Fine, Gun, N
MF
MF 5 x 0.5 58 16 22 5.0 4.0 7 3 4.5 • T407 0503 $55.70
0604 MF 6 x 0.75 66 19 26 6.3 5.0 8 3 5.3 • T407 0604 $68.07
0805 MF 8 x 1 72 22 30 8.0 6.3 9 3 7.0 T406 0805 $31.93 T407 0805 $31.93
1005 MF 10 x 1 80 24 34 10.0 8.0 11 3 9.0 • T407 1005 $95.01
1006 MF 10 x 1.25 80 24 34 10.0 8.0 11 3 8.8 T406 1006 $42.38 T407 1006 $42.38
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 3 10.8 • T407 1206 $107.37
1207 MF 12 x 1.5 89 29 - 9.0 7.1 10 3 10.5 T406 1207 $70.25 T407 1207 $70.25
1407 MF 14 x 1.5 95 30 - 11.2 9.0 12 3 12.5 • T407 1407 $127.62
1607 MF 16 x 1.5 102 32 - 12.5 10.0 13 3 14.5 • T407 1607 $127.62
1807 MF 18 x 1.5 112 37 - 14.0 11.2 14 4 16.5 • T407 1807 $152.93
2007 MF 20 x 1.5 112 37 - 14.0 11.2 14 4 18.5 • T407 2007 $194.46
2207 MF 22 x 1.5 118 38 - 16.0 12.5 16 4 20.5 • T407 2207 $194.46
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T406
•
•
•
•
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
•
•
• •
T407
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
•
0604 MF 6 x 0.75 66 19 26 6.3 5.0 8 3 5.3 •
0805 MF 8 x 1 72 22 30 8.0 6.3 9 3 7.0 T408 0805 $49.63
1005 MF 10 x 1 80 24 34 10.0 8.0 11 3 9.0 •
1006 MF 10 x 1.25 80 24 34 10.0 8.0 11 3 8.8 T408 1006 $70.38
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 3 10.8 •
1207 MF 12 x 1.5 89 29 - 9.0 7.1 10 3 10.5 T408 1207 $91.76
1407 MF 14 x 1.5 95 30 - 11.2 9.0 12 3 12.5 •
1607 MF 16 x 1.5 102 32 - 12.5 10.0 13 3 14.5 •
1807 MF 18 x 1.5 112 37 - 14.0 11.2 14 4 16.5 •
2007 MF 20 x 1.5 112 37 - 14.0 11.2 14 4 18.5 •
2207 MF 22 x 1.5 118 38 - 16.0 12.5 16 4 20.5 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T408
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
MF
MF 5 x 0.5 58 16 22 5.0 4.0 7 3 4.5 T409 0503 $72.23 •
0604 MF 6 x 0.75 66 19 26 6.3 5.0 8 3 5.3 T409 0604 $72.23 •
0805 MF 8 x 1 72 22 30 8.0 6.3 9 3 7.0 T409 0805 $59.92 T411 0805 $71.09
1005 MF 10 x 1 80 24 34 10.0 8.0 11 3 9.0 T409 1005 $79.44 •
1006 MF 10 x 1.25 80 24 34 10.0 8.0 11 3 8.8 T409 1006 $85.88 T411 1006 $103.60
1206 MF 12 x 1.25 89 29 - 9.0 7.1 10 3 10.8 T409 1206 $91.54 •
1207 MF 12 x 1.5 89 29 - 9.0 7.1 10 3 10.5 T409 1207 $134.77 T411 1207 $144.16
1406 MF 14 x 1.25 95 30 - 11.2 9.0 12 3 12.8 T409 1406 $110.12 •
1407 MF 14 x 1.5 95 30 - 11.2 9.0 12 3 12.5 T409 1407 $110.12 •
1607 MF 16 x 1.5 102 32 - 12.5 10.0 13 3 14.5 T409 1607 $110.12 •
1807 MF 18 x 1.5 112 37 - 14.0 11.2 14 4 16.5 T409 1807 $129.90 •
2007 MF 20 x 1.5 112 37 - 14.0 11.2 14 4 18.5 T409 2007 $167.22 •
2207 MF 22 x 1.5 118 38 - 16.0 12.5 16 4 20.5 T409 2207 $167.22 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T409
•
•
•
•
•
• •
• •
• •
• •
•
•
•
•
•
• •
•
• •
T411
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
0251 #3 48 45 10 - 2.80 2.24 5 3 GH2 T414 0251 $57.37 T415 0251 $57.37
0284 #4 40 48 15 14.5 3.15 2.50 5 3 GH2 T414 0284 $40.41 T415 0284 $40.41
0318 #5 40 48 15 15 3.15 2.50 5 3 GH2 T414 0318 $40.41 T415 0318 $40.41
0351 #6 32 50 17 17.5 3.55 2.80 5 3 GH3 T414 0351 $26.42 T415 0351 $26.42
0417 #8 32 53 13 17 4.50 3.55 6 3 GH3 T414 0417 $26.90 T415 0417 $26.90
0476 3/16 24 (UNS) 58 16 22 5.00 4.00 7 3 GH4 T414 0476 $28.38 T415 0476 $28.38
0483 #10 24 58 16 22 5.00 4.00 7 3 GH4 T414 0483 $24.65 T415 0483 $24.65
0549 #12 24 62 17 23 5.60 4.50 7 3 GH4 T414 0549 $29.64 T415 0549 $29.64
0635 1/4 20 66 19 25 6.30 5.00 8 3 GH4 T414 0635 $23.52 T415 0635 $23.52
0636 1/4* 20 66 19 25 6.30 5.00 8 3 GH3 • •
0794 5/16* 18 72 22 30 8.00 6.30 9 4 GH5 • •
0795 5/16 18 72 22 30 8.00 6.30 9 4 GH3 T414 0794 $24.65 T415 0794 $24.65
0953 3/8 16 80 24 33 10.00 8.00 11 4 GH5 T414 0953 $33.92 T415 0953 $33.92
1111 7/16 14 85 25 - 8.00 6.30 9 4 GH3 T414 1111 $45.02 T415 1111 $45.02
1270 1/2 13 89 29 - 9.00 7.10 10 4 GH6 T414 1270 $50.43 T415 1270 $50.43
1429 9/16 12 95 30 - 11.20 9.00 12 4 GH6 T414 1429 $72.92 T415 1429 $72.92
1588 5/8 11 102 32 - 12.50 10.00 13 4 GH6 T414 1588 $76.80 T415 1588 $76.80
1905 3/4 10 112 37 - 14.00 11.20 14 4 GH7 T414 1905 $100.00 T415 1905 $100.00
2223 7/8 9 118 38 - 16.00 12.50 16 4 GH7 T414 2223 $149.81 T415 2223 $149.81
2540 1 8 130 45 - 18.00 14.00 18 4 GH7 T414 2540 $180.81 T415 2540 $180.81
2858 1-1/8 7 138 48 - 20.00 16.00 20 4 GH8 T414 2858 $295.82 T415 2858 $295.82
3175 1-1/4 7 151 51 - 22.40 18.00 22 4 GH8 T414 3175 $330.50 T415 3175 $330.50
3810 1-1/2 6 170 60 - 28.00 22.40 26 4 GH8 T414 3810 $492.51 T415 3810 $492.51
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T414
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T415
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNC
0251 #3 48 45 10 - 2.80 2.24 5 3 GH2 T416 0251 $57.37 •
0284 #4 40 48 15 14.5 3.15 2.50 5 3 GH2 T416 0284 $40.41 T903 0284 $121.18
0318 #5 40 48 15 15 3.15 2.50 5 3 GH2 T416 0318 $40.41 T903 0318 $121.18
0351 #6 32 50 17 17.5 3.55 2.80 5 3 GH3 T416 0351 $26.42 T903 0351 $79.25
0417 #8 32 53 13 17 4.50 3.55 6 3 GH3 T416 0417 $26.90 T903 0417 $80.72
0476 3/16 24 (UNS) 58 16 22 5.00 4.00 7 3 GH4 T416 0476 $28.38 T903 0476 $85.17
0483 #10 24 58 16 22 5.00 4.00 7 3 GH4 T416 0483 $24.65 T903 0483 $73.86
0549 #12 24 62 17 23 5.60 4.50 7 3 GH4 T416 0549 $29.64 T903 0549 $88.91
0635 1/4 20 66 19 25 6.30 5.00 8 3 GH4 T416 0635 $23.52 T903 0635 $70.55
0636 1/4* 20 66 19 25 6.30 5.00 8 3 GH3 T416 0636 $23.52 •
0794 5/16* 18 72 22 30 8.00 6.30 9 4 GH5 T416 0794 $24.65 T903 0794 $73.86
0795 5/16 18 72 22 30 8.00 6.30 9 4 GH3 T416 0795 $24.65 •
0953 3/8 16 80 24 33 10.00 8.00 11 4 GH5 T416 0953 $33.92 T903 0953 $101.78
1111 7/16 14 85 25 - 8.00 6.30 9 4 GH3 T416 1111 $45.02 T903 1111 $135.07
1270 1/2 13 89 29 - 9.00 7.10 10 4 GH6 T416 1270 $50.43 T903 1270 $151.30
1429 9/16 12 95 30 - 11.20 9.00 12 4 GH6 T416 1429 $72.92 T903 1429 $218.72
1588 5/8 11 102 32 - 12.50 10.00 13 4 GH6 T416 1588 $76.80 T903 1588 $230.35
1905 3/4 10 112 37 - 14.00 11.20 14 4 GH7 T416 1905 $100.00 T903 1905 $299.93
2223 7/8 9 118 38 - 16.00 12.50 16 4 GH7 T416 2223 $149.81 T903 2223 $449.49
2540 1 8 130 45 - 18.00 14.00 18 4 GH7 T416 2540 $180.81 T903 2540 $542.43
2858 1-1/8 7 138 48 - 20.00 16.00 20 4 GH8 T416 2858 $295.82 •
3175 1-1/4 7 151 51 - 22.40 18.00 22 4 GH8 T416 3175 $330.50 T903 3175 $991.48
3810 1-1/2 6 170 60 - 28.00 22.40 26 4 GH8 T416 3810 $492.51 T903 3810 $1,477.49
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T416
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T903
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T417
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
T418
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNC
0635 1/4 20 66 19 25 6.30 5.00 8 3 GH4 5.1 T419 0635 $73.63 T420 0635 $73.63
0794 5/16 18 72 22 30 8.00 6.30 9 4 GH5 6.6 T419 0794 $85.41 T420 0794 $85.41
0953 3/8 16 80 24 33 10.00 8.00 11 4 GH5 8.0 T419 0953 $104.70 T420 0953 $104.70
1111 7/16 14 85 25 - 8.00 6.30 9 4 GH5 9.4 T419 1111 $152.58 T420 1111 $152.58
1270 1/2 13 89 29 - 9.00 7.10 10 4 GH6 10.8 T419 1270 $184.47 T420 1270 $184.47
1429 9/16 12 95 30 - 11.20 9.00 12 4 GH6 12.2 T419 1429 $184.47 T420 1429 $184.47
1588 5/8 11 102 32 - 12.50 10.00 13 4 GH6 13.5 T419 1588 $213.94 T420 1588 $213.94
1905 3/4 10 112 37 - 14.00 11.20 14 4 GH7 16.5 T419 1905 $317.57 T420 1905 $317.57
2223 7/8 9 118 38 - 16.00 12.50 16 4 GH7 19.5 • •
2540 1 8 130 45 - 18.00 14.00 18 4 GH7 22.2 • •
2858 1-1/8 7 138 48 - 20.00 16.00 20 4 GH8 25.0 • •
3175 1-1/4 7 151 51 - 22.40 18.00 22 4 GH8 28.0 • •
3810 1-1/2 6 170 60 - 28.00 22.40 26 4 GH8 34.0 • •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T419
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T420
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T421
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNC
0284 #4 40 48 15 14.5 3.15 2.50 5 2 GH2 2.3 T422 0284 $46.86 T423 0284 $46.86
0351 #6 32 50 17 17.5 3.55 2.80 5 3 GH3 2.8 T422 0351 $30.53 T423 0351 $30.53
0417 #8 32 53 13 18 4.50 3.55 6 3 GH3 3.4 T422 0417 $33.92 T423 0417 $33.92
0483 #10 24 58 16 22 5.00 4.00 7 3 GH4 3.8 T422 0483 $30.75 T423 0483 $30.75
0549 #12 24 62 17 23 5.60 4.50 7 3 GH4 4.5 • T423 0549 $25.87
0635 1/4 20 66 19 25 6.30 5.00 8 3 GH4 5.1 T422 0635 $29.64 T423 0635 $29.64
0794 5/16 18 72 22 30 8.00 6.30 9 3 GH5 6.6 T422 0794 $31.93 T423 0794 $31.93
0953 3/8 16 80 24 33 10.00 8.00 11 3 GH5 8.0 T422 0953 $38.93 T423 0953 $38.93
1111 7/16 14 85 25 - 8.00 6.30 9 3 GH5 9.4 T422 1111 $63.41 T423 1111 $63.41
1270 1/2 13 89 29 - 9.00 7.10 10 3 GH6 10.8 T422 1270 $70.25 T423 1270 $70.25
1588 5/8 11 102 32 - 12.50 10.00 13 3 GH6 13.5 T422 1588 $111.49 T423 1588 $111.49
1905 3/4 10 112 37 - 14.00 11.20 14 4 GH7 16.5 T422 1905 $157.44 T423 1905 $157.44
2223 7/8 9 118 38 - 16.00 12.50 16 4 GH7 19.5 • T423 2223 $210.39
2540 1 8 130 45 - 18.00 14.00 18 4 GH7 22.2 • T423 2540 $255.29
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T422
•
•
•
•
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
•
•
• •
T423
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T424
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNC
0218 #2 56 41 8 - 2.5 2.0 - 2 GH2 1.85 T425 0218 $66.07 •
0284 #4 40 48 6 - 3.15 2.50 5 3 GH2 2.3 T425 0284 $46.51 •
0351 #6 32 50 6 - 3.55 2.80 5 3 GH3 2.8 T425 0351 $37.61 •
0417 #8 32 53 8 18 4.50 3.55 6 3 GH3 3.4 T425 0417 $37.61 •
0483 #10 24 58 11 22 5.00 4.00 7 3 GH4 3.8 T425 0483 $37.61 •
0635 1/4 20 66 10 25 6.30 5.00 8 3 GH4 5.1 T425 0635 $36.94 T426 0635 $36.94
0794 5/16 18 72 13 30 8.00 6.30 9 3 GH5 6.6 T425 0794 $40.41 T426 0794 $40.41
0953 3/8 16 80 16 33 10.00 8.00 11 3 GH5 8.0 T425 0953 $55.42 T426 0953 $55.42
1111 7/16 14 85 18 - 8.00 6.30 9 3 GH5 9.4 T425 1111 $78.43 T426 1111 $78.43
1270 1/2 13 89 20 - 9.00 7.10 10 3 GH6 10.8 T425 1270 $89.93 T426 1270 $89.93
1588 5/8 11 102 20 - 12.50 10.00 13 3 GH6 13.5 T425 1588 $142.28 T426 1588 $142.28
1905 3/4 10 112 25 - 14.00 11.20 14 4 GH7 16.5 T425 1905 $192.14 T426 1905 $192.14
2223 7/8 9 118 38 - 16.00 12.50 16 4 GH7 19.5 T425 2223 $263.73 •
2540 1 8 130 45 - 18.00 14.00 18 4 GH7 22.2 T425 2540 $305.80 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T425
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
•
•
•
• •
T426
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T427
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNC
0318 #5 40 48 15 15 3.15 2.50 5 - GH5 2.9 T428 0318 $137.79 •
0351 #6 32 50 17 17.5 3.55 2.80 5 - GH6 3.2 T428 0351 $78.43 T429 0351 $83.90
0417 #8 32 53 13 18 4.50 3.55 6 - GH6 3.8 T428 0417 $78.43 T429 0417 $83.90
0483 #10 24 58 16 22 5.00 4.00 7 - GH6 4.4 T428 0483 $78.43 T429 0483 $83.90
0635 1/4 20 66 19 25 6.30 5.00 8 - GH7 5.8 T428 0635 $82.99 T429 0635 $88.74
0794 5/16 18 72 22 30 8.00 6.30 9 - GH7 7.3 T428 0794 $91.11 •
0953 3/8 16 80 24 33 10.00 8.00 11 - GH7 8.8 T428 0953 $112.94 •
1270 1/2 13 89 29 - 9.00 7.10 10 - GH8 11.7 T428 1270 $183.81 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T428
•
•
•
•
• •
•
•
•
•
• •
• •
T429
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
0635 1/4 20 110 38 - 4.5 3.55 6 4 GH4 5.1 T430 0635 $72.23
0794 5/16 18 125 43 - 6 4.5 7 4 GH5 6.6 T430 0794 $79.44
0953 3/8 16 140 48 - 7 5.6 8 4 GH5 8.0 T430 0953 $79.44
1270 1/2 13 180 59 - 9.5 7.5 10 4 GH6 10.8 T430 1270 $91.54
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T430
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
94
95
ISO Taps UNF, Straight Flute, N
UNF
0251 #3 56 45 10 - 2.80 2.24 5 3 2.1 T431 0251 $57.64 T432 0251 $57.64
0284 #4 48 48 15 14.5 3.15 2.50 5 3 2.35 T431 0284 $40.41 T432 0284 $40.41
0318 #5 44 48 15 15 3.15 2.50 5 3 2.65 T431 0318 $40.41 T432 0318 $40.41
0351 #6 40 50 17 17.5 3.55 2.80 5 3 2.9 T431 0351 $40.41 T432 0351 $40.41
0417 #8 36 53 13 17 4.50 3.55 6 3 3.5 T431 0417 $27.72 T432 0417 $27.72
0476 3/16 32 (UNS) 58 16 22 5.00 4.00 7 3 4.0 T431 0476 $34.69 T432 0476 $34.69
0483 #10 32 58 16 22 5.00 4.00 7 3 4.1 T431 0483 $24.17 T432 0483 $24.17
0549 #12 28 62 17 23 5.60 4.50 7 3 4.6 T431 0549 $30.03 T432 0549 $30.03
0635 1/4 28 66 19 25 6.30 5.00 8 3 5.5 T431 0635 $22.99 T432 0635 $22.99
0794 5/16 24 72 22 30 8.00 6.30 9 4 6.9 T431 0794 $24.33 T432 0794 $24.33
0953 3/8 24 80 24 33 10.00 8.00 11 4 8.5 T431 0953 $33.36 T432 0953 $33.36
1111 7/16 20 85 25 - 8.00 6.30 9 4 9.8 T431 1111 $45.02 T432 1111 $45.02
1270 1/2 20 89 29 - 9.00 7.10 10 4 11.5 T431 1270 $50.73 T432 1270 $50.73
1429 9/16 18 95 30 - 11.20 9.00 12 4 12.8 T431 1429 $72.92 T432 1429 $72.92
1588 5/8 18 102 32 - 12.50 10.00 13 4 14.5 T431 1588 $74.84 T432 1588 $74.84
1905 3/4 16 112 37 - 14.00 11.20 14 4 17.5 T431 1905 $99.80 T432 1905 $99.80
2223 7/8 14 118 38 - 16.00 12.50 16 4 20.5 T431 2223 $149.81 T432 2223 $149.81
2540 1 12 130 45 - 18.00 14.00 18 4 23.5 T431 2540 $180.47 T432 2540 $180.47
2541 1 14 (UNS) 130 45 - 18.00 14.00 18 4 24.0 T431 2541 $259.21 T432 2541 $259.21
2858 1-1/8 12 138 48 - 20.00 16.00 20 4 26.5 T431 2858 $295.82 T432 2858 $295.82
3175 1-1/4 12 151 51 - 22.40 18.00 22 4 29.5 T431 3175 $330.50 T432 3175 $330.50
3810 1-1/2 12 170 60 - 28.00 22.40 26 4 36.0 T431 3810 $491.91 T432 3810 $491.91
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T431
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T432
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
95
ISO Taps UNF, Straight Flute, N
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T433
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T904
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNF
0251 #3 56 45 10 - 2.80 2.24 5 3 GH2 2.1 • •
0284 #4 48 48 15 14.5 3.15 2.50 5 3 GH2 2.35 • •
0318 #5 44 48 15 15 3.15 2.50 5 3 GH2 2.65 • •
0351 #6 40 50 17 17.5 3.55 2.80 5 3 GH2 2.9 • •
0417 #8 36 53 13 18 4.50 3.55 6 3 GH2 3.5 • •
0476 3/16 32 (UNS) 58 16 22 5.00 4.00 7 3 GH3 4.0 • •
0483 #10 32 58 16 22 5.00 4.00 7 3 GH3 4.1 T434 0483 $34.27 T435 0483 $34.27
0549 #12 28 62 17 23 5.60 4.50 7 3 GH3 4.6 • •
0635 1/4 28 66 19 25 6.30 5.00 8 3 GH3 5.5 T434 0635 $33.56 T435 0635 $33.56
0794 5/16 24 72 22 30 8.00 6.30 9 4 GH4 6.9 T434 0794 $43.83 T435 0794 $43.83
0953 3/8 24 80 24 33 10.00 8.00 11 4 GH4 8.5 T434 0953 $50.75 T435 0953 $50.75
1111 7/16 20 85 25 - 8.00 6.30 9 4 GH5 9.8 T434 1111 $72.39 T435 1111 $72.39
1270 1/2 20 89 29 - 9.00 7.10 10 4 GH5 11.5 T434 1270 $76.77 T435 1270 $76.77
1429 9/16 18 95 30 - 11.20 9.00 12 4 GH5 12.8 • •
1588 5/8 18 102 32 - 12.50 10.00 13 4 GH5 14.5 T434 1588 $107.36 T435 1588 $107.36
1905 3/4 16 112 37 - 14.00 11.20 14 4 GH6 17.5 T434 1905 $138.93 T435 1905 $138.93
2223 7/8 14 118 38 - 16.00 12.50 16 4 GH6 20.5 • •
2540 1 12 130 45 - 18.00 14.00 18 4 GH7 23.5 • •
2541 1 14 (UNS) 130 45 - 18.00 14.00 18 4 GH5 24.0 • •
2858 1-1/8 12 138 48 - 20.00 16.00 20 4 GH7 26.5 • •
3175 1-1/4 12 151 51 - 22.40 18.00 22 4 GH7 29.5 • •
3810 1-1/2 12 170 60 - 28.00 22.40 26 4 GH7 36.0 • •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T434
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
T435
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
0635 1/4 28 66 19 25 6.30 5.00 8 3 GH3 5.5 T436 0635 $80.33 T437 0635 $80.33
0794 5/16 24 72 22 30 8.00 6.30 9 4 GH4 6.9 T436 0794 $85.41 T437 0794 $85.41
0953 3/8 24 80 24 33 10.00 8.00 11 4 GH4 8.5 T436 0953 $108.04 T437 0953 $108.04
1111 7/16 20 85 25 - 8.00 6.30 9 4 GH5 9.8 T436 1111 $152.58 T437 1111 $152.58
1270 1/2 20 89 29 - 9.00 7.10 10 4 GH5 11.5 T436 1270 $184.47 T437 1270 $184.47
1429 9/16 18 95 30 - 11.20 9.00 12 4 GH5 12.8 T436 1429 $184.47 T437 1429 $184.47
1588 5/8 18 102 32 - 12.50 10.00 13 4 GH5 14.5 T436 1588 $227.56 T437 1588 $227.56
1905 3/4 16 112 37 - 14.00 11.20 14 4 GH6 17.5 T436 1905 $323.45 T437 1905 $323.45
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T436
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T437
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
98
ISO Taps UNF, Straight Flute, N, Left Hand
UNF
0635 1/4 28 66 19 25 6.30 5.00 8 3 GH3 5.5 T438 0635 $80.33
0794 5/16 24 72 22 30 8.00 6.30 9 4 GH4 6.9 T438 0794 $85.41
0953 3/8 24 80 24 33 10.00 8.00 11 4 GH4 8.5 T438 0953 $108.04
1111 7/16 20 85 25 - 8.00 6.30 9 4 GH5 9.8 T438 1111 $152.58
1270 1/2 20 89 29 - 9.00 7.10 10 4 GH5 11.5 T438 1270 $184.47
1429 9/16 18 95 30 - 11.20 9.00 12 4 GH5 12.8 T438 1429 $184.47
1588 5/8 18 102 32 - 12.50 10.00 13 4 GH5 14.5 T438 1588 $227.56
1905 3/4 16 112 37 - 14.00 11.20 14 4 GH6 17.5 T438 1905 $323.45
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T438
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
99
ISO Taps UNEF, Straight Flute, N
UNEF
Catalogue Code T445 T446
Discount Group D0702 D0702
Material HSS HSS
Surface Finish Brt Brt
Sutton Designation N N
Geometry Extra Fine Extra Fine
Chamfer Taper Intermediate
Nut Tolerance 2B 2B
Size Ref. d1 TPI l1 l2 l3 d2 sq l4 z Limit drill ø Item # List Price Item # List Price
UNEF
UNEF Series
0635 1/4 32 66 19 25 6.30 5.00 8 3 GH3 5.6 T445 0635 $72.23 T446 0635 $72.23
0794 5/16 32 72 22 30 8.00 6.30 9 4 GH4 7.2 T445 0794 $79.44 T446 0794 $79.44
0953 3/8 32 80 24 33 10.00 8.00 11 4 GH4 8.8 T445 0953 $79.44 T446 0953 $79.44
1270 1/2 28 89 29 - 9.00 7.10 10 4 GH5 11.8 T445 1270 $91.54 T446 1270 $91.54
1588 5/8 24 102 32 - 12.50 10.00 13 4 GH5 14.75 T445 1588 $110.12 T446 1588 $110.12
1905 3/4 20 112 37 - 14.00 11.20 14 4 GH6 18.0 T445 1905 $129.90 T446 1905 $129.90
2540 1 20 130 45 - 18.00 14.00 18 4 GH7 24.2 T445 2540 $186.80 T446 2540 $186.80
Stitching Tap
0655 #1 64 36 - 8.08 6.15 9.5 4 - 5.0 • •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T445
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T446
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNEF
Catalogue Code T447
Discount Group D0702
Material HSS
Surface Finish Brt
Sutton Designation N
Geometry Extra Fine
Chamfer Bottoming
Nut Tolerance 2B
Size Ref. d1 TPI l1 l2 l3 d2 sq l4 z Limit drill ø Item # List Price
UNEF
UNEF Series
0635 1/4 32 66 19 25 6.30 5.00 8 3 GH3 5.6 T447 0635 $72.23
0794 5/16 32 72 22 30 8.00 6.30 9 4 GH4 7.2 T447 0794 $79.44
0953 3/8 32 80 24 33 10.00 8.00 11 4 GH4 8.8 T447 0953 $79.44
1270 1/2 28 89 29 - 9.00 7.10 10 4 GH5 11.8 T447 1270 $91.54
1588 5/8 24 102 32 - 12.50 10.00 13 4 GH5 14.75 T447 1588 $110.12
1905 3/4 20 112 37 - 14.00 11.20 14 4 GH6 18.0 T447 1905 $129.90
2540 1 20 130 45 - 18.00 14.00 18 4 GH7 24.2 T447 2540 $186.80
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T447
•
•
•
•
• • •
• • •
• • •
• • •
• • •
•
•
•
•
• • •
• • •
T489
•
•
•
•
•
•
•
•
T490
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
101
102 102
ISO Taps UNF, Gun, N
0483 #10 32 58 16 22 5.00 4.00 7 3 GH3 4.1 T439 0483 $31.12 T440 0483 $31.12
0635 1/4 28 66 19 25 6.30 5.00 8 3 GH3 5.5 T439 0635 $30.03 T440 0635 $30.03
0794 5/16 24 72 22 30 8.00 6.30 9 3 GH4 6.9 T439 0794 $32.36 T440 0794 $32.36
0953 3/8 24 80 24 33 10.00 8.00 11 3 GH4 8.5 T439 0953 $43.74 T440 0953 $43.74
1111 7/16 20 85 25 - 8.00 6.30 9 3 GH5 9.8 T439 1111 $63.41 T440 1111 $63.41
1270 1/2 20 89 29 - 9.00 7.10 10 3 GH5 11.5 T439 1270 $70.25 T440 1270 $70.25
1588 5/8 18 102 32 - 12.50 10.00 13 3 GH5 12.8 T439 1588 $111.49 T440 1588 $111.49
1905 3/4 16 112 37 - 14.00 11.20 14 4 GH6 17.5 T439 1905 $157.44 T440 1905 $157.44
2223 7/8 14 118 38 - 16.00 12.50 16 4 GH6 20.5 • T440 2223 $210.39
2540 1 12 130 45 - 18.00 14.00 18 4 GH7 23.5 • T440 2540 $255.29
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T439
•
•
•
•
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
•
•
• •
T440
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNF
0483 #10 32 58 16 22 5.00 4.00 7 3 GH3 4.1 T441 0483 $39.63
0635 1/4 28 66 19 25 6.30 5.00 8 3 GH3 5.5 T441 0635 $38.77
0794 5/16 24 72 22 30 8.00 6.30 9 3 GH4 6.9 T441 0794 $50.02
0953 3/8 24 80 24 33 10.00 8.00 11 3 GH4 8.5 T441 0953 $58.71
1111 7/16 20 85 25 - 8.00 6.30 9 3 GH5 9.8 •
1270 1/2 20 89 29 - 9.00 7.10 10 3 GH5 11.5 T441 1270 $91.76
1588 5/8 18 102 32 - 12.50 10.00 13 3 GH5 12.8 T441 1588 $135.38
1905 3/4 16 112 37 - 14.00 11.20 14 4 GH6 17.5 T441 1905 $183.06
2223 7/8 14 118 38 - 16.00 12.50 16 4 GH6 20.5 •
2540 1 12 130 45 - 18.00 14.00 18 4 GH7 23.5 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T441
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
0483 #10 32 58 11 22 5.00 4.00 7 3 GH3 4.1 T442 0483 $38.11 T443 0483 $44.95
0635 1/4 28 66 10 25 6.30 5.00 8 3 GH3 5.5 T442 0635 $36.94 T443 0635 $44.09
0794 5/16 24 72 13 30 8.00 6.30 9 3 GH4 6.9 T442 0794 $40.41 T443 0794 $56.10
0953 3/8 24 80 16 33 10.00 8.00 11 3 GH4 8.5 T442 0953 $55.42 T443 0953 $67.58
1111 7/16 20 85 18 - 8.00 6.30 9 3 GH5 9.8 T442 1111 $78.43 •
1270 1/2 20 89 20 - 9.00 7.10 10 3 GH5 11.5 T442 1270 $89.93 T443 1270 $106.74
1588 5/8 18 102 20 - 12.50 10.00 13 3 GH5 12.8 T442 1588 $142.28 T443 1588 $158.87
1905 3/4 16 112 25 - 14.00 11.20 14 4 GH6 17.5 T442 1905 $192.14 T443 1905 $209.56
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T442
•
•
•
•
•
• •
• •
• •
• •
•
•
•
•
•
• •
•
• •
T443
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
UNF
0635 1/4 28 66 19 25 6.30 5.00 7 - GH7 6.0 T444 0635 $87.13
0794 5/16 24 72 22 30 8.00 6.30 8 - GH7 7.5 T444 0794 $157.37
0953 3/8 24 80 24 33 10.00 8.00 9 - GH7 9.0 T444 0953 $157.37
1270 1/2 20 89 29 - 9.00 7.10 10 - GH8 12.1 T444 1270 $183.81
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T444
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
105
ISO Taps 8UN, Straight Flute, N
2858 1-1/8 8 138 48 - 20.00 16.00 20 4 25.5 T448 2858 $236.26 T449 2858 $236.26
3175 1-1/4 8 151 51 - 22.40 18.00 22 4 28.5 T448 3175 $264.69 T449 3175 $264.69
3493 1-3/8 8 162 57 - 25.00 20.00 24 4 31.75 T448 3493 $312.94 T449 3493 $312.94
3810 1-1/2 8 170 60 - 28.00 22.40 26 4 35.0 T448 3810 $361.20 T449 3810 $361.20
4128 1-5/8 8 170 60 - 28.00 22.40 26 4 38.0 T448 4128 $430.46 T449 4128 $430.46
4445 1-3/4 8 187 67 - 31.50 25.00 28 4 41.5 T448 4445 $499.73 T449 4445 $499.73
4763 1-7/8 8 187 67 - 31.50 25.00 28 4 44.5 T448 4763 $602.40 T449 4763 $602.40
5080 2 8 200 70 - 35.50 28.00 31 4 47.5 T448 5080 $705.07 T449 5080 $705.07
6033 2-3/8 8 221 76 - 40.00 31.50 34 6 57.15 • •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T448
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T449
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
8UN
2858 1-1/8 8 138 48 - 20.00 16.00 20 4 25.5 T450 2858 $236.26 T910 2858 $708.75
3175 1-1/4 8 151 51 - 22.40 18.00 22 4 28.5 T450 3175 $264.69 T910 3175 $794.09
3493 1-3/8 8 162 57 - 25.00 20.00 24 4 31.75 T450 3493 $312.94 T910 3493 $930.48
3810 1-1/2 8 170 60 - 28.00 22.40 26 4 35.0 T450 3810 $361.20 T910 3810 $1,083.63
4128 1-5/8 8 170 60 - 28.00 22.40 26 4 38.0 T450 4128 $430.46 T910 4128 $1,464.40
4445 1-3/4 8 187 67 - 31.50 25.00 28 4 41.5 T450 4445 $499.73 T910 4445 $1,499.15
4763 1-7/8 8 187 67 - 31.50 25.00 28 4 44.5 T450 4763 $602.40 T910 4763 $1,927.09
5080 2 8 200 70 - 35.50 28.00 31 4 47.5 T450 5080 $705.07 T910 5080 $2,115.21
6033 2-3/8 8 221 76 - 40.00 31.50 34 6 57.15 • •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T450
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T910
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
0238 3/32 48(WHIT) 45 10 - 2.80 2.24 5 3 1.85 T451 0238 $96.46 T452 0238 $96.46
0318 1/8 40 48 15 15 3.15 2.50 5 3 2.55 T451 0318 $38.52 T452 0318 $38.52
0397 5/32 32(WHIT) 53 17 17 4.00 3.15 6 3 3.2 T451 0397 $38.52 T452 0397 $38.52
0476 3/16 24 58 16 22 5.00 4.00 7 3 3.7 T451 0476 $24.33 T452 0476 $24.33
0556 7/32 24(WHIT) 62 17 23 5.60 4.50 7 3 4.5 T451 0556 $36.59 T452 0556 $36.59
0635 1/4 20 66 19 25 6.30 5.00 8 3 5.1 T451 0635 $24.65 T452 0635 $24.65
0794 5/16 18 72 22 30 8.00 6.30 9 4 6.5 T451 0794 $25.83 T452 0794 $25.83
0953 3/8 16 80 24 33 10.00 8.00 11 4 7.9 T451 0953 $35.32 T452 0953 $35.32
1111 7/16 14 85 25 - 8.00 6.30 9 4 9.3 T451 1111 $46.98 T452 1111 $46.98
1270 1/2 12 89 29 - 9.00 7.10 10 4 10.5 T451 1270 $52.62 T452 1270 $52.62
1429 9/16 12 95 30 - 11.20 9.00 12 4 12.1 T451 1429 $76.35 T452 1429 $76.35
1588 5/8 11 102 32 - 12.50 10.00 13 4 13.5 T451 1588 $80.34 T452 1588 $80.34
1905 3/4 10 112 37 - 14.00 11.20 14 4 16.25 T451 1905 $104.48 T452 1905 $104.48
2223 7/8 9 118 38 - 16.00 12.50 16 4 19.25 T451 2223 $156.71 T452 2223 $156.71
2540 1 8 130 45 - 18.00 14.00 18 4 22.0 T451 2540 $188.93 T452 2540 $188.93
2858 1-1/8 7 138 48 - 20.00 16.00 20 4 24.75 T451 2858 $309.40 T452 2858 $309.40
3175 1-1/4 7 151 51 - 22.40 18.00 22 4 28.0 T451 3175 $342.85 T452 3175 $342.85
3810 1-1/2 6 170 60 - 28.00 22.40 26 4 33.5 T451 3810 $511.97 T452 3810 $511.97
4445 1-3/4 5 187 67 - 31.50 25.00 28 4 39.0 T451 4445 $722.60 T452 4445 $722.60
5080 2 4-1/2 200 70 - 35.50 28.00 31 4 44.5 T451 5080 $1,043.35 T452 5080 $1,043.35
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T451
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T452
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
108
109
ISO Taps BSW, Straight Flute, N
BSW
0238 3/32 48(WHIT) 45 10 - 2.80 2.24 5 3 1.85 T453 0238 $96.46 T905 0238 $289.31
0318 1/8 40 48 15 15 3.15 2.50 5 3 2.55 T453 0318 $38.52 T905 0318 $115.59
0397 5/32 32(WHIT) 53 17 17 4.00 3.15 6 3 3.2 T453 0397 $38.52 T905 0397 $115.59
0476 3/16 24 58 16 22 5.00 4.00 7 3 3.7 T453 0476 $24.33 T905 0476 $72.92
0556 7/32 24(WHIT) 62 17 23 5.60 4.50 7 3 4.5 T453 0556 $36.59 T905 0556 $109.77
0635 1/4 20 66 19 25 6.30 5.00 8 3 5.1 T453 0635 $24.65 T905 0635 $73.86
0794 5/16 18 72 22 30 8.00 6.30 9 4 6.5 T453 0794 $25.83 T905 0794 $77.41
0953 3/8 16 80 24 33 10.00 8.00 11 4 7.9 T453 0953 $35.32 T905 0953 $105.92
1111 7/16 14 85 25 - 8.00 6.30 9 4 9.3 T453 1111 $46.98 T905 1111 $140.95
1270 1/2 12 89 29 - 9.00 7.10 10 4 10.5 T453 1270 $52.62 T905 1270 $157.93
1429 9/16 12 95 30 - 11.20 9.00 12 4 12.1 T453 1429 $76.35 T905 1429 $229.04
1588 5/8 11 102 32 - 12.50 10.00 13 4 13.5 T453 1588 $80.34 T905 1588 $241.00
1905 3/4 10 112 37 - 14.00 11.20 14 4 16.25 T453 1905 $104.48 T905 1905 $313.44
2223 7/8 9 118 38 - 16.00 12.50 16 4 19.25 T453 2223 $156.71 T905 2223 $470.12
2540 1 8 130 45 - 18.00 14.00 18 4 22.0 T453 2540 $188.93 T905 2540 $566.80
2858 1-1/8 7 138 48 - 20.00 16.00 20 4 24.75 T453 2858 $309.40 •
3175 1-1/4 7 151 51 - 22.40 18.00 22 4 28.0 T453 3175 $342.85 •
3810 1-1/2 6 170 60 - 28.00 22.40 26 4 33.5 T453 3810 $511.97 •
4445 1-3/4 5 187 67 - 31.50 25.00 28 4 39.0 T453 4445 $722.60 •
5080 2 4-1/2 200 70 - 35.50 28.00 31 4 44.5 T453 5080 $1,043.35 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T453
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
T905
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T454
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
T455
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
BSW
0635 1/4 20 66 19 25 6.30 5.00 8 3 5.1 T456 0635 $72.23
0794 5/16 18 72 22 30 8.00 6.30 9 4 6.5 T456 0794 $79.44
0953 3/8 16 80 24 33 10.00 8.00 11 4 7.9 T456 0953 $79.44
1111 7/16 14 85 25 - 8.00 6.30 9 4 9.3 T456 1111 $91.54
1270 1/2 12 89 29 - 9.00 7.10 10 4 10.5 T456 1270 $91.54
1429 9/16 12 95 30 - 11.20 9.00 12 4 12.1 T456 1429 $110.12
1588 5/8 11 102 32 - 12.50 10.00 13 4 13.5 T456 1588 $110.12
1905 3/4 10 112 37 - 14.00 11.20 14 4 16.25 T456 1905 $129.90
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T456
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
111
112 112
ISO Taps BSW, Gun, N
0318 1/8 40 48 15 15 3.15 2.50 5 3 2.55 T457 0318 $46.64 T458 0318 $46.64
0397 5/32 32(WHIT) 53 17 17 4.00 3.15 6 3 3.2 T457 0397 $45.02 T458 0397 $45.02
0476 3/16 24 58 16 22 5.00 4.00 7 3 3.7 T457 0476 $36.94 T458 0476 $36.94
0635 1/4 20 66 19 25 6.30 5.00 8 3 5.1 T457 0635 $31.47 T458 0635 $31.47
0794 5/16 18 72 22 30 8.00 6.30 9 3 6.5 T457 0794 $33.70 T458 0794 $33.70
0953 3/8 16 80 24 33 10.00 8.00 11 3 7.9 T457 0953 $45.88 T458 0953 $45.88
1111 7/16 14 85 25 - 8.00 6.30 9 3 9.3 T457 1111 $66.31 T458 1111 $66.31
1270 1/2 12 89 29 - 9.00 7.10 10 3 10.5 T457 1270 $73.59 T458 1270 $73.59
1588 5/8 11 102 32 - 12.50 10.00 13 3 13.5 T457 1588 $118.58 T458 1588 $118.58
1905 3/4 10 112 37 - 14.00 11.20 14 4 16.25 T457 1905 $165.93 T458 1905 $165.93
2223 7/8 9 118 38 - 16.00 12.50 16 4 19.25 • T458 2223 $210.39
2540 1 8 130 45 - 18.00 14.00 18 4 22.0 • T458 2540 $255.29
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T457
•
•
•
•
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
•
•
• •
T458
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
BSW
0318 1/8 40 48 15 15 3.15 2.50 5 3 2.55 T459 0318 $49.89
0397 5/32 32(WHIT) 53 17 17 4.00 3.15 6 3 3.2 T459 0397 $50.28
0476 3/16 24 58 16 22 5.00 4.00 7 3 3.7 T459 0476 $44.09
0635 1/4 20 66 19 25 6.30 5.00 8 3 5.1 T459 0635 $39.87
0794 5/16 18 72 22 30 8.00 6.30 9 3 6.5 T459 0794 $51.01
0953 3/8 16 80 24 33 10.00 8.00 11 3 7.9 T459 0953 $60.30
1111 7/16 14 85 25 - 8.00 6.30 9 3 9.3 •
1270 1/2 12 89 29 - 9.00 7.10 10 3 10.5 T459 1270 $94.20
1588 5/8 11 102 32 - 12.50 10.00 13 3 13.5 T459 1588 $140.77
1905 3/4 10 112 37 - 14.00 11.20 14 4 16.25 T459 1905 $189.51
2223 7/8 9 118 38 - 16.00 12.50 16 4 19.25 •
2540 1 8 130 45 - 18.00 14.00 18 4 22.0 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T459
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T460
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
•
•
•
• •
T461
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
BSW
0318 1/8 40 48 6 15 3.15 2.50 5 3 2.55 •
0397 5/32 32(WHIT) 53 7 17 4.00 3.15 6 3 3.2 •
0476 3/16 24 58 11 22 5.00 4.00 7 3 3.7 T462 0476 $51.74
0635 1/4 20 66 10 25 6.30 5.00 8 3 5.1 T462 0635 $45.36
0794 5/16 18 72 13 30 8.00 6.30 9 3 6.5 T462 0794 $57.42
0953 3/8 16 80 16 33 10.00 8.00 11 3 7.9 T462 0953 $69.47
1111 7/16 14 85 18 - 8.00 6.30 9 3 9.3 •
1270 1/2 12 89 20 - 9.00 7.10 10 3 10.5 T462 1270 $109.83
1588 5/8 11 102 20 - 12.50 10.00 13 3 13.5 T462 1588 $163.89
1905 3/4 10 112 25 - 14.00 11.20 14 4 16.25 •
2223 7/8 9 118 28 - 16.00 12.50 16 4 19.25 •
2540 1 8 130 35 - 18.00 14.00 18 4 22.0 •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T462
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T463
•
•
•
•
• •
•
•
•
•
• •
• •
T464
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
BSW
0635 1/4 20 110 38 - 4.5 3.55 6 4 5.1 T465 0635 $72.23
0794 5/16 18 125 43 - 6 4.5 7 4 6.5 T465 0794 $79.44
0953 3/8 16 140 48 - 7 5.6 8 4 7.9 T465 0953 $79.44
1270 1/2 12 180 59 - 9.5 7.5 10 4 10.5 T465 1270 $91.54
1588 5/8 11 200 70 - 12.5 10.0 13 4 13.5 T465 1588 $110.12
1905 3/4 10 250 76 - 14 11.2 14 4 16.25 T465 1905 $110.12
2540 1 8 280 95 - 18 14.0 18 4 22.0 T465 2540 $110.12
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T465
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
117
118
ISO Taps BSF, BSB & BA, Straight Flute, N
BSF
0476 3/16 32 58 16 22 5.00 4.00 7 3 4.0 T466 0476 $26.60 T467 0476 $26.60
0635 1/4 26 66 19 25 6.30 5.00 8 3 5.3 T466 0635 $30.53 T467 0635 $30.53
0794 5/16 22 72 22 30 8.00 6.30 9 4 6.8 T466 0794 $33.06 T467 0794 $33.06
0953 3/8 20 80 24 33 10.00 8.00 11 4 8.3 T466 0953 $46.34 T467 0953 $46.34
1111 7/16 18 85 25 - 8.00 6.30 9 4 9.8 T466 1111 $55.42 T467 1111 $55.42
1270 1/2 16 89 29 - 9.00 7.10 10 4 11.0 T466 1270 $68.37 T467 1270 $68.37
1429 9/16 16 95 30 - 11.20 9.00 12 4 12.7 T466 1429 $88.45 T467 1429 $88.45
1588 5/8 14 102 32 - 12.50 10.00 13 4 14.0 T466 1588 $88.45 T467 1588 $88.45
1905 3/4 12 112 37 - 14.00 11.20 14 4 16.75 T466 1905 $136.59 T467 1905 $136.59
2223 7/8 11 118 38 - 16.00 12.50 16 4 19.75 T466 2223 $184.73 T467 2223 $184.73
2540 1 10 130 45 - 18.00 14.00 18 4 22.75 T466 2540 $241.43 T467 2540 $241.43
BA T469 T470
0600 0 1 66 19 26 6.30 5.00 8 3 5.1 T469 0600 $29.03 T470 0600 $29.03
0530 1 0.9 62 17 23 5.60 4.50 7 3 4.5 T469 0530 $30.43 T470 0530 $30.43
0470 2 0.81 58 16 22 5.00 4.00 7 3 4.0 T469 0470 $27.02 T470 0470 $27.02
0410 3 0.73 53 13 18 4.50 3.55 6 3 3.4 T469 0410 $30.08 T470 0410 $30.08
0360 4 0.66 50 17 - 3.55 2.80 5 3 3.0 T469 0360 $27.02 T470 0360 $27.02
0320 5 0.59 48 15 - 3.15 2.50 5 3 2.65 T469 0320 $28.09 T470 0320 $28.09
0280 6 0.53 48 15 - 3.15 2.50 5 3 2.3 T469 0280 $30.43 T470 0280 $30.43
0250 7 0.48 45 10 - 2.80 2.24 5 3 2.05 T469 0250 $46.36 T470 0250 $46.36
0220 8 0.43 45 10 - 2.80 2.24 5 3 1.8 T469 0220 $44.56 T470 0220 $44.56
0190 9 0.39 41 8 - 2.50 2.00 4 3 1.55 T469 0190 $81.47 T470 0190 $81.47
0170 10 0.35 41 8 - 2.50 2.00 4 3 1.4 T469 0170 $85.78 T470 0170 $85.78
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T466 / T467
•
•
•
•
• • •
• • •
• • •
• • •
• • •
•
•
•
•
• • •
• • •
T472 / T473
•
•
•
•
•
•
•
•
T469 / T470
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
118 • Available on request as special manufacture. Subject to lead time. * Limit & Nut Tolerance = Z4
ISO Taps BSF, BSB & BA, Straight Flute, N
BSF
BSF
0476 3/16 32 58 16 22 5.00 4.00 7 3 4.0 T468 0476 $26.60 T906 0476 $79.71
0635 1/4 26 66 19 25 6.30 5.00 8 3 5.3 T468 0635 $30.53 T906 0635 $91.38
0794 5/16 22 72 22 30 8.00 6.30 9 4 6.8 T468 0794 $33.06 T906 0794 $99.17
0953 3/8 20 80 24 33 10.00 8.00 11 4 8.3 T468 0953 $46.34 T906 0953 $139.02
1111 7/16 18 85 25 - 8.00 6.30 9 4 9.8 T468 1111 $55.42 T906 1111 $166.21
1270 1/2 16 89 29 - 9.00 7.10 10 4 11.0 T468 1270 $68.37 T906 1270 $205.12
1429 9/16 16 95 30 - 11.20 9.00 12 4 12.7 T468 1429 $88.45 •
1588 5/8 14 102 32 - 12.50 10.00 13 4 14.0 T468 1588 $88.45 •
1905 3/4 12 112 37 - 14.00 11.20 14 4 16.75 T468 1905 $136.59 •
2223 7/8 11 118 38 - 16.00 12.50 16 4 19.75 T468 2223 $184.73 •
2540 1 10 130 45 - 18.00 14.00 18 4 22.75 T468 2540 $241.43 •
BA T471 T907
0600 0 1 66 19 26 6.30 5.00 8 3 5.1 T471 0600 $29.03 •
0530 1 0.9 62 17 23 5.60 4.50 7 3 4.5 T471 0530 $30.43 T907 0530 $91.29
0470 2 0.81 58 16 22 5.00 4.00 7 3 4.0 T471 0470 $27.02 T907 0470 $80.94
0410 3 0.73 53 13 18 4.50 3.55 6 3 3.4 T471 0410 $30.08 T907 0410 $90.28
0360 4 0.66 50 17 - 3.55 2.80 5 3 3.0 T471 0360 $27.02 T907 0360 $80.94
0320 5 0.59 48 15 - 3.15 2.50 5 3 2.65 T471 0320 $28.09 T907 0320 $84.05
0280 6 0.53 48 15 - 3.15 2.50 5 3 2.3 T471 0280 $30.43 T907 0280 $91.29
0250 7 0.48 45 10 - 2.80 2.24 5 3 2.05 T471 0250 $46.36 T907 0250 $139.02
0220 8 0.43 45 10 - 2.80 2.24 5 3 1.8 T471 0220 $44.56 T907 0220 $133.81
0190 9 0.39 41 8 - 2.50 2.00 4 3 1.55 T471 0190 $81.47 T907 0190 $244.39
0170 10 0.35 41 8 - 2.50 2.00 4 3 1.4 T471 0170 $85.78 T907 0170 $257.29
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T468 / T906
•
•
•
•
• • •
• • •
• • •
• • •
• • •
•
•
•
•
• • •
• • •
T474 / T908
•
•
•
•
•
•
•
•
T471 / T907
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
• Available on request as special manufacture. Subject to lead time. * Limit & Nut Tolerance = Z4 119
120
ISO Taps Pipe, G (BSPF), Straight Flute
0973 1/8 28 59 15 - 8.0 6.3 9 4 8.8 T479 0973 $40.83 T480 0973 $40.83
1316 1/4 19 67 19 - 10.0 8.0 11 4 11.8 T479 1316 $57.64 T480 1316 $57.64
1666 3/8 19 75 21 - 12.5 10.0 13 4 15.3 T479 1666 $84.63 T480 1666 $84.63
2096 1/2 14 87 26 - 16.0 12.5 16 4 19.0 T479 2096 $119.12 T480 2096 $119.12
2291 5/8 14 91 26 - 18.0 14.0 18 4 21.0 T479 2291 $157.44 T480 2291 $157.44
2644 3/4 14 96 28 - 20.0 16.0 20 4 24.5 T479 2644 $169.14 T480 2644 $169.14
3020 7/8 14 102 29 - 22.4 18.0 22 4 28.5 T479 3020 $242.04 T480 3020 $242.04
3325 1 11 109 33 - 25.0 20.0 24 4 31.0 T479 3325 $280.57 T480 3325 $280.57
4191 1-1/4 11 119 36 - 31.5 25.0 28 4 39.5 T479 4191 $499.02 T480 4191 $499.02
4780 1-1/2 11 125 37 - 35.5 28.0 31 4 45.5 T479 4780 $560.62 T480 4780 $560.62
5375 1-3/4 11 132 39 - 35.5 28.0 31 6 51.5 T479 5375 $904.05 T480 5375 $904.05
5961 2 11 140 41 - 40.0 31.5 34 6 57.5 T479 5961 $968.88 T480 5961 $968.88
120
ISO Taps Pipe, G (BSPF), Spiral Point Gun
- General purpose use
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Depths up to approx. 1 x d1
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T479
•
•
•
•
• • •
• • •
• •
• • •
• • •
•
•
•
•
• • •
• •
T480
•
•
•
•
•
•
•
•
T484
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
120
ISO Taps Pipe, G (BSPF), Straight Flute
G (BSPF)
0973 1/8 28 59 15 - 8.0 6.3 9 4 8.8 T481 0973 $40.83 T909 0973 $122.46
1316 1/4 19 67 19 - 10.0 8.0 11 4 11.8 T481 1316 $57.64 T909 1316 $173.03
1666 3/8 19 75 21 - 12.5 10.0 13 4 15.3 T481 1666 $84.63 T909 1666 $253.84
2096 1/2 14 87 26 - 16.0 12.5 16 4 19.0 T481 2096 $119.12 T909 2096 $357.33
2291 5/8 14 91 26 - 18.0 14.0 18 4 21.0 T481 2291 $157.44 T909 2291 $472.33
2644 3/4 14 96 28 - 20.0 16.0 20 4 24.5 T481 2644 $169.14 T909 2644 $507.45
3020 7/8 14 102 29 - 22.4 18.0 22 4 28.5 T481 3020 $242.04 •
3325 1 11 109 33 - 25.0 20.0 24 4 31.0 T481 3325 $280.57 T909 3325 $841.71
4191 1-1/4 11 119 36 - 31.5 25.0 28 4 39.5 T481 4191 $499.02 •
4780 1-1/2 11 125 37 - 35.5 28.0 31 4 45.5 T481 4780 $560.62 •
5375 1-3/4 11 132 39 - 35.5 28.0 31 6 51.5 T481 5375 $904.05 •
5961 2 11 140 41 - 40.0 31.5 34 6 57.5 T481 5961 $968.88 •
121
ISO Taps Pipe, G (BSPF), Spiral Flute
- General purpose use
- Suitable for materials up to 1000N/mm2
- Through & blind holes
- Depths up to approx. 1 x d1
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T481
•
•
•
•
• • •
• •
•
• • •
• •
•
•
•
•
• • •
• • •
T485
•
•
•
•
•
•
•
•
•
•
T909
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
• Available on request as special manufacture. Subject to lead time. 121
122
ISO Taps Pipe, G (BSPF), Straight Flute
0973 1/8 28 59 15 - 8.0 6.3 9 4 8.8 T482 0973 $67.30 T483 0973 $67.30
1316 1/4 19 67 19 - 10.0 8.0 11 4 11.8 T482 1316 $78.99 T483 1316 $78.99
1666 3/8 19 75 21 - 12.5 10.0 13 4 15.3 T482 1666 $106.46 T483 1666 $106.46
2096 1/2 14 87 26 - 16.0 12.5 16 4 19.0 T482 2096 $170.41 T483 2096 $170.41
2291 5/8 14 91 26 - 18.0 14.0 18 4 21.0 • T483 2291 $210.89
2644 3/4 14 96 28 - 20.0 16.0 20 4 24.5 • T483 2644 $219.01
3020 7/8 14 102 29 - 22.4 18.0 22 4 28.5 • •
3325 1 11 109 33 - 25.0 20.0 24 4 31.0 • •
4191 1-1/4 11 119 36 - 31.5 25.0 28 4 39.5 • •
4780 1-1/2 11 125 37 - 35.5 28.0 31 4 45.5 • •
5375 1-3/4 11 132 39 - 35.5 28.0 31 6 51.5 • •
5961 2 11 140 41 - 40.0 31.5 34 6 57.5 • •
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T482
•
•
•
•
•
•
•
•
• •
• •
• •
• •
• •
• •
•
•
•
•
• •
• •
• •
T483
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
Rc, Rp, Pg
Rc (BSPT) 1:16 Taper Rate
0973 1/8 28 59 15 - 8.0 6.3 9 4 8.4 T475 0973 $92.23 T476 0973 $103.92
1316 1/4 19 67 19 - 10.0 8.0 11 4 10.8 T475 1316 $99.80 T476 1316 $109.76
1666 3/8 19 75 21 - 12.5 10.0 13 4 14.5 T475 1666 $153.76 T476 1666 $164.46
2096 1/2 14 87 26 - 16.0 12.5 16 4 18.0 T475 2096 $173.06 T476 2096 $207.87
2644 3/4 14 96 28 - 20.0 16.0 20 4 23.0 T475 2644 $215.16 •
3325 1 11 109 33 - 25.0 20.0 24 5 29.0 T475 3325 $307.51 •
4191 1-1/4 11 119 36 - 31.5 25.0 28 5 38.0 T475 4191 $495.79 •
4780 1-1/2 11 125 37 - 35.5 28.0 31 7 44.0 T475 4780 $654.51 •
5961 2 11 140 41 - 40.0 31.5 34 7 55.0 T475 5961 $1,069.26 •
Nom*
Size Ref. d1 TPI l1 l2 l3 d2 sq l4 z drill ø OD Item # List Price
Rp Series (BSPPL) Sealing Pipe Thread Parallel T477
0973 1/8 28 59 15 - 8.0 6.3 9 4 8.6 - T477 0973 $48.03
1316 1/4 19 67 19 - 10.0 8.0 11 4 11.5 - T477 1316 $59.16
1666 3/8 19 75 21 - 12.5 10.0 13 4 15.0 - T477 1666 $74.17
2096 1/2 14 87 26 - 16.0 12.5 16 4 18.5 - T477 2096 $100.45
2644 3/4 14 96 28 - 20.0 16.0 20 4 24.0 - T477 2644 $137.33
3325 1 11 109 33 - 25.0 20.0 24 4 30.2 - T477 3325 $191.29
4191 1-1/4 11 119 36 - 31.5 25.0 28 4 39.0 - T477 4191 $361.20
4780 1-1/2 11 125 37 - 35.5 28.0 31 4 45.0 - T477 4780 $403.25
5961 2 11 140 41 - 40.0 31.5 34 4 56.4 - T477 5961 $776.83
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T475
•
•
•
•
•
•
• • •
• • •
• • •
•
•
•
•
• • •
• • •
T476
•
•
•
•
•
• •
• •
•
•
•
•
•
•
T477 / T478
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
• Available on request as special manufacture. Subject to lead time. *Nominal OD 123
124
ISO Taps Pipe, National Series
NPT (National Pipe Taper) 15° Chamfer (1:16 Taper Rate) T487
1029 1/8 27 54 19 - 11.11 8.33 9.5 4 - 8.2 T487 1029 $72.24
1372 1/4 18 62 27 - 14.29 10.70 11.1 4 - 10.8 T487 1372 $101.76
1715 3/8 18 65 27 - 17.78 13.49 12.7 4 - 14.0 T487 1715 $153.76
2134 1/2 14 79 35 - 17.46 13.08 15.9 4 - 17.5 T487 2134 $176.65
2667 3/4 14 82 35 - 23.00 17.25 17.5 4 - 23.0 T487 2667 $219.07
3340 1 11-1/2 95 44.5 - 28.60 21.40 20.6 5 - 28.5 T487 3340 $316.93
4216 1-1/4 11-1/2 102 44.5 - 33.30 25.00 23.8 5 - 37.0 T487 4216 $518.42
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
T486
•
•
•
•
• • •
• • •
• • •
• • •
• • •
• • •
•
•
•
•
• • • •
• • • •
• • • •
T487
•
•
•
•
•
•
•
•
T488
•
•
•
•
•
•
•
•
R108
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
124 P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
HSS ENDMILLS
• Slotting, Finishing, Roughing & Profiling • Short & Long Series
• Various shank styles • General purpose & application specific geometries
HSS Endmills Finder
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined by referring to
the material cross reference listing in the application guide at the
back of this catalogue.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
Catalogue Code E104 E105 E106 E119 E129 E130 E131 E178
Type of Cut: Slotting • • • • •
Finishing • • • •
Universal • • • •
Roughing •
Profiling
Material HSS Co HSS Co HSS Co HSS
Surface Finish Brt TiN Brt Brt Brt TiN Brt Brt
Sutton Designation N N N N
Standard - - - -
Shank Tolerance -0.025 -0.025 -0.025 h6
ISO VDI^ Material Condition HB N/mm2
3323
K
17 Cast Iron - Nodular Ferritic 160 570 • • • • • • • •
(GGG)
18 Pearlitic 250 840
19 Cast Iron - Malleable Ferritic 130 460 • • • • • • • •
20 Pearlitic 230 780
21 Aluminum & Magnesium Non Heat Treatable 60 210 • • • • • • • •
- wrought alloy
22 Heat Treatable AH 100 360 • • • • • • • •
23 Aluminum & Magnesium Non Heat Treatable 75 270 • • • • • • • •
- cast alloy ≤12% Si
24 Heat Treatable AH 90 320 • • • • • • • •
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460
N
26 Copper & Cu alloys Free cutting, Pb > 1% 110 390
(Brass/Bronze)
27 Brass (CuZn, CuSnZn) 90 320
28 Bronze (CuSn) 100 360
29 Non-metallic - Thermosetting & fiber-reinforced plastics
30 Non-metallic - Hard rubber, wood etc.
31 High temp. alloys Fe based A 200 680
32 AH 280 950
33 Ni / Co based A 250 840
34 AH 350 1180
35 C 320 1080
S 36 Titanium & Ti alloys CP Titanium 400 MPa
37.1 Alpha alloys 860 MPa
37.2 Alpha / Beta A 960 MPa
alloys
37.3 AH 1170 MPa
37.4 Beta alloys A 830 MPa
37.5 AH 1400 MPa
38.1 Hardened steel HT 45 HRC
38.2 HT 55 HRC
39.1 HT 58 HRC
H
39.2 HT 62 HRC
40 Cast Iron Chilled C 400 1350 • •
41 HT 55 HRC
Condition: A (Annealed), AH (Age Hardened), C (Cast), HT (Hardened & Tempered), QT (Quenched & Tempered)
126 • Optimal • Effective
136 138 139 140 142 143 144 145 146 147 148 149 149
E100 E102 / E225 E184 E125 / E227 E192 E127 / E229 E230 E142 / E144 E143 E146 E113 E168 E169
• • •
• • • •
• • • •
• • • • •
•
HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8 HSS Co.8
Brt Brt TiAlN Brt TiAlN Brt TiCN Brt TiCN Brt Brt Brt TiCN
N N N N N N WN WN N NH
JIS JIS DIN 844L JIS DIN 844K JIS JIS DIN 844L - JIS
h6 h6 h6 h6 h6 h6 h6 h6 h6 h6
VDI^ ISO
3323
• • • • • • • • • • • 1
• • • • • • • • • • • 2
• • • • • • • • • • • • 3
• • • • • • • • • • • 4
• • • • • • • • • • • 5
• • • • • • • • • • • 6
• • • • • • • • • • • 7 P
• • • • • • • • • • • 8
• • • • 9
• • • • • • • • • • 10
• • • • 11
• • • • • • • 12
• • • • • • • • • 13
• • • • • 14.1
• • • • • 14.2 M
• • • 14.3
• • • • • • • • • • • 15
• • • • • • • • • 16
• • • • • • • • • • • 17
K
• • • • • • • • • 18
• • • • • • • • • • • 19
• • • • • • • • • 20
• • • • • • • • • • • 21
• • • • • • • • • • • 22
• • • • • • • • • • • 23
• • • • • • • • • • • 24
• • • • • • 25
N
• • • • • • • • • • • 26
• • 27
• • • • • • • • • • • 28
29
30
31
32
33
34
35
36 S
37.1
37.2
37.3
37.4
37.5
38.1
38.2
39.1
H
39.2
• • • 40
41
127
128 128
Slot Drills Threaded, 2 Flute, R30 N, Regular
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E104
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
E105
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
SD2 6 piece set 1/8, 3/16, 1/4, 5/16, 3/8, 1/2” E104 SD2 $311.07
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E104
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
E105
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E106
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
130
131
Endmills 3 Flute, R30 N, Regular, Threaded
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E119
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
131
132 132
Endmills 4 Flute, R30 N, Regular, Threaded
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E129
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
E130
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
132
Endmills 4 Flute, R30 N, Regular, Threaded
EM2 6 piece set 1/8, 3/16, 1/4, 5/16, 3/8, 1/2” E129 EM2 $269.70
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E129
•
•
•
•
• •
• •
• •
• •
• •
•
•
•
•
E130
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E131
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
134
135
Roughers Woodruff Cutter, Threaded
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E178
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
135
136
Slot Drills 2 Flute, R30 N, Regular
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
136
Slot Drills 2 Flute, R30 N, Regular
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
137
138
Slot Drills 2 Flute, R30 N, Long
Sutton Standard
0635 1/4 2-9/16 1 1/4 2 E102 0635 $52.13
0953 3/8 3-3/4 1-3/4 3/8 2 E102 0953 $66.24
1270 1/2 4-5/16 2-5/32 1/2 2 E102 1270 $73.33
1905 3/4 5-1/2 2-61/64 3/4 2 E102 1905 $223.85
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E102
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
• •
• •
E225
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
138
139
Slot Drills 2 Flute, R30 N, Long
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E184
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
139
140 140
Endmills 4 Flute, R30 N, Regular
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E125
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
E227
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
140
Endmills 4 Flute, R30 N, Regular
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E125
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
141
142
Endmills 4 Flute, R30 N, Regular
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E192
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
142
143
Endmills 4 Flute, R30 N, Long
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E127
•
•
•
•
•
•
•
•
• •
• •
• •
•
•
•
•
•
•
•
•
•
•
• •
• •
E229
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E230
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
144
145
Roughers NR (normal), R30 WN, Regular
NR
B 45º
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E142
•
•
•
•
• •
•
•
•
•
• •
• •
E144
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
145
146
Roughers NR (normal), R30 WN, Regular
NR
B 45º
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E143
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
146
147
Roughers NR (normal), R30 WN, Long
NR
45º
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E146
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E113
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
HR
A B
Catalogue Code E168 E169
Discount Group B0402 B0404
Material HSS Co.8 HSS Co.8
Surface Finish Brt TiCN
Sutton Designation NH NH
Geometry R30 HR R30 HR
Shank Form (DIN 1835) A A
Shank Tolerance h6 h6
Size Ref. d1 (js14) l1 l2 d2 z Item # List Price Item # List Price
0600 6.0 60 15 10 3 E168 0600 $84.99 E169 0600 $90.96
0800 8.0 65 20 10 3 E168 0800 $93.31 E169 0800 $99.80
1000 10.0 75 25 10 4 E168 1000 $102.13 E169 1000 $109.14
1200 12.0 80 30 12 4 E168 1200 $131.67 E169 1200 $147.86
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
E168
•
• •
•
•
•
•
•
•
•
•
•
•
• •
E169
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
149
dius
Scan to
watch the video
r Ra
ar
e
l
t
Regu
Shor
Corn
RS
5/38
5/38
5/38
5-H
3 R3
5 R3
9 R3
9 R4
E53
E53
E55
E54
Performance Unequalled…
Harmony Endmills 35/38° Unequal
Flute Helix
45º
The Harmony range of Endmills represents world’s latest
technologies to provide increases in both performance and tool 45° Corner
life. The key to successful milling is to minimise or eliminate the Chamfering (E535)
harmonic vibration produced in the cutting action. Endteeth Gash
for Edge Strength r
The Harmony Endmill overcomes vibration, through
the latest technologies in tool engineering: Corner Radius
(E559) Available
• Premium Grade Carbide
• AlCrN Coating Optimised Edge
Conditioning
• 35/38° Variable Helix
• 45° Corner Chamfering
• Gash grind of the endteeth AICrN Coating for
• Post grind treatment of cutting edges Longer Tool Life
Recessed for
The bottom line for you: Longer Reach
• Longer tool life
• Improved surface finish
Made from VHM-ULTRA,
• Increased productivity an Ultra Fine Grain
• Reduced production costs Type of Carbide
Expert Tool Selector
Sutton Tools Expert Tool Selector enables easy tool selection for your machining
task. The Expert Tool Selector will recommend the right tool for your application,
with advice on suitable cutting parameters. Simply select your work piece
material, and enter your machining operation and setup to get the best advice
in 5 easy steps:
www.suttontools.com/expert-tool-selector
152
REAMERS
• Hand • Machine (Morse Taper & Chucking) • Bridge • Taper Pin
• Morse Taper Socket • Taper Pipe • Adjustable
AlCrN: G6 generation coatings...
a quantum leap in tool wear resistance
Aluminium Chromium Nitride Extraordinary performance gains have
The latest tool coating formula is Aluminium Chromium Nitride (AICrN). been demonstrated in dry and wet
Coatings of this G6 generation developed, markedly expand the machining processes involving:
performance envelope versus conventional titanium based coatings • Unalloyed steels
(such as TiAIN, AITiN or TiCN). • High strength steels
• High hardness steels (up to 54 HRC)
Unique coating properties
The AICrN coating exhibits until now, an unmatched degree of
oxidation resistance and hot hardness. These properties have Coating properties:
triggered a quantum leap in tool wear resistance. • Very high abrasion resistance
• High and constant temperature resistance
The bottom line: greater productivity!
• Unrivalled oxidation resistance
Tools coated with AlCrN let you choose noticeably higher cutting
• Titanium free coating
speeds and allow you to more effectively exploit the potential of
modern machine tools. You can produce more parts per time / unit
to decisively boost the productivity of your manufacturing resources
and hone your competitive edge.
Reamers Finder
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI 3323 material groups can also be determined by referring to
the material cross reference listing in the application guide at the
back of this catalogue.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
Catalogue Code R100 R101 R102 R104 R105 R106 R107 R108 R109
Material HSS HSS HSS Co HSS HSS HSS HSS HSS TCA
Surface Finish Brt Brt Brt Brt Brt Brt Brt Brt Brt
Sutton Designation N N N N N Roughing Finishing Tapered Pipe N
DIN 206 / DIN 212 /
Standard ISO 236 DIN 208 ISO 521 – – – – – –
Geometry L10 L10 L10 L15 L7 L7 L7 L15 Straight
ISO VDI^ Material Condition HB N/mm2
3323
H7
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
156
Reamers Hand
H7
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R100
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
157
158
Reamers Machine
- Machine use
- Suitable for toolroom & workshop use
- Produces clean, accurate holes, to a H7 tolerance
H7
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
158
Reamers Machine
- Machine use
- Suitable for toolroom & workshop use
- Produces clean, accurate holes, to a H7 tolerance
H7
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
159
Reamers Machine
- Machine use
- Suitable for toolroom & workshop use
- Produces clean, accurate holes, to a H7 tolerance
H7
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R101
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
160
161
Reamers Chucking
- Machine use
- Suitable for toolroom & workshop use
- Produces clean, accurate holes, to a H7 tolerance
H7
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
161
162
Reamers Bridge
- Machine use
- For opening out existing holes
- Ideal for alignment in fabrication & construction work
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R104
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
162
163
Reamers Taper Pin
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R105
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
163
164
Reamers Morse Taper Socket
164
Reamers Morse Taper Socket
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R106
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
R107
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
164
165
Reamers Taper Pipe
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R108
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
165
166
Reamers Adjustable
R109 M8
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
R109
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
166
Reamers Adjustable
R111 MA1
167
168
CARBIDE BURS
• Double Cut • Aluminium Cut • Comprehensive range of shapes
• Standard & extra length available • Sets & merchandisers • Die Grinder Kit
Carbide Burs Finder
Page
ISO VDI Material Group Sutton 1/4" 172 172 172 174 174 174 176 176 176
P A Steel N 6mm 173 173 175 175 177 177
M R Stainless Steel VA
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined by referring
to the material cross reference listing in the application guide
at the back of this catalogue.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
Catalogue Code (1/4" Shank) B200 B210 B215 B201 B211 B216 B202 B212 B217
Catalogue Code (6mm Shank) B300 B315 B301 B316 B302 B317
Material VHM VHM VHM
Surface Finish Brt Brt Brt
Sutton Designation Steel Aluminium Steel Aluminium Steel Aluminium
Standard Sutton Standard Sutton Standard Sutton Standard
Geometry Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut
ISO VDI^ Material Condition HB N/mm2
3323
B900 SCB100
B901 SCB100
B203 B218 B204 B213 B219 B205 B206 B207 B214 B220 B208 B209
B303 B304 B319 B305 B306 B307 B308
VHM VHM VHM VHM VHM VHM VHM
Brt Brt Brt Brt Brt Brt Brt
Steel Aluminium Steel Aluminium Steel Steel Steel Aluminium Steel Steel
Sutton Standard Sutton Standard Sutton Sutton Sutton Standard Sutton Sutton
Standard Standard Standard Standard
Double Cut Al Cut Double Cut Al Cut Double Cut Double Cut Double Cut Al Cut Double Cut Double Cut
VDI^ B900 SCB300
3323
ISO B901 SCB300
• • • • • • • • • • • • 1
• • • • • • • • • • • • 2
• • • • • • • • • 3
• • • • • • • • • 4
• • • • • • • • • 5
• • • • • • • • • • • • 6
• • • • • • • • • 7 P
• • • • • • • • • 8
• • • • • • • • • 9
• • • • • • • • • 10 B900 SCB5
• • • • • • • • • 11
• • • • • • • • • 12
• • • • • • • • • 13
• • • • • • • • • 14.1
• • • • • • • • • 14.2 M
• • • • • • • • • 14.3
• • • • • • • • • 15
• • • • • • • • • 16
• • • • • • • • • 17
K
• • • • • • • • • 18
• • • • • • • • • 19
• • • • • • • • • 20
• • • 21
• • • 22
• • • 23
• • • 24
• • • 25
N
• • • 26
27
• • • 28
29
30
31
32
33
34
35
36 S
37.1
37.2
37.3
37.4
37.5
• • • • • • • • • 38.1
• • • • • • • • • 38.2
39.1
H
39.2
• • • • • • • • • 40
• • • • • • • • • 41
171
172 172 172
Carbide Burs Cylindrical, Square End
Aluminium Cut
SA1AC 1/4 2 3/4 1/4 B215 SA1AC $58.81
SA3AC 3/8 2-1/2 3/4 1/4 B215 SA3AC $87.60
SA5AC 1/2 2-3/4 1 1/4 B215 SA5AC $128.27
SA6AC 5/8 2-3/4 1 1/4 B215 SA6AC $157.48
SA7AC 3/4 2-3/4 1 1/4 B215 SA7AC $216.92
Cylindrical Square
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B200
• • •
• • •
• •
• •
• •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
B210
B215
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
172
173 173
Carbide Burs Cylindrical, Square End
Aluminium Cut
SA3AC 9.5 64.0 19.1 6.0 B315 SA3AC $87.60
Cylindrical Square
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B300
• •
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B315
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
173
174 174 174
Carbide Burs Cylindrical, Radius End
Aluminium Cut
SC1AC 1/4 2 5/8 1/4 B216 SC1AC $65.71
SC3AC 3/8 2-1/2 3/4 1/4 B216 SC3AC $87.60
SC5AC 1/2 2-3/4 1 1/4 B216 SC5AC $128.27
SC7AC 3/4 2-3/4 1 1/4 B216 SC7AC $268.00
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B201
• • •
• • •
• •
• •
• •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
B211
B216
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
174
175 175
Carbide Burs Cylindrical, Radius End
Aluminium Cut
SC1AC 6.0 51.0 15.9 6.0 B316 SC1AC $65.71
SC3AC 9.5 64.0 19.1 6.0 B316 SC3AC $87.60
SC5AC 12.7 70.0 25.4 6.0 B316 SC5AC $128.27
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B301
• •
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B316
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
175
176 176 176
Carbide Burs Ball Shape
Aluminium Cut
SD1AC 1/4 2 1/4 B217 SD1AC $64.63
SD3AC 3/8 2-1/16 1/4 Cylindrical
B217 SD3AC Square
$73.00
SD5AC 1/2 2-3/16 1/4 B217 SD5AC $104.29
SD6AC 5/8 2-5/16 1/4 B217 SD6AC $186.67
SD7AC 3/4 2-7/16 1/4 B217 SD7AC $317.01
Ball Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B202
• • •
• • •
• •
• •
• •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
B212
B217
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
176
177 177
Carbide Burs Ball Shape
Aluminium Cut
SD3AC 9.5 52.0 7.9 6.0 B317 SD3AC $73.00
Cylindrical Square
Ball Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B302
• •
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B317
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
177
178 178
Carbide Burs Oval Shape
Aluminium Cut
SE3AC 3/8 2-11/32 19/32 1/4 B218 SE3AC $95.94
SE5AC 1/2 2-5/8 7/8 1/4 B218 SE5AC $117.84
SE6AC 5/8 2-3/4 1 1/4 B218 SE6AC $210.65
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B203
• •
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B218
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
178
179
Carbide Burs Oval Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B303
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
179
180 180 180
Carbide Burs Tree Shape, Radius End
Aluminium Cut
SF1AC 1/4 2 3/4 1/4 B219 SF1AC $66.74
SF3AC 3/8 2-1/2 3/4 1/4 B219 SF3AC $93.87
SF5AC 1/2 2-3/4 1 1/4 B219 SF5AC $131.40
SF6AC 5/8 2-3/4 1 1/4 B219 SF6AC
Ball Shape $186.67
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B204
• • •
• • •
• •
• •
• •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
B213
B219
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
180
181 181
Carbide Burs Tree Shape, Radius End
Cylindrical Square
Aluminium Cut
SF3AC 9.5 64.0 19.1 6.0 B319 SF3AC $93.87
SF5AC 12.7 70.0 25.4 6.0 B319 SF5AC $131.40
SF6AC 15.9 70.0 25.4 6.0 B319 SF6AC $186.67
Ball Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B304
• •
• •
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
B319
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
181
182 182
Carbide Burs Tree Shape, Pointed End
METRIC
Double Cut
SG100 6.0 51.0 15.9 6.0 B305 SG100 $57.57
SG200 7.9 64.0 19.1 6.0 B305 SG200 $64.63
SG300 9.5 64.0 19.1 6.0 B305 SG300 $70.88
SG130 12.7 64.0 19.1 6.0 B305 SG130 $95.94
SG500 12.7 70.0 25.4 6.0 B305 SG500 $98.02
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B205
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
B305
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
182
183 183
Carbide Burs Flame Shape
Cylindrical Square
Catalogue Code B206 B306
Discount Group B0102 B0102
Material VHM VHM
Surface Finish Brt Brt
Application Steel Steel
Geometry Double Cut Double Cut
Shank 1/4 6mm
Size Ref. d1 l1 l2 d2 Item # List Price Item # List Price
IMPERIAL
Double Cut
SH410 1/8 1-1/2 1/4 1/8 B206 SH410 $25.45
SH100 1/4 2 5/8 1/4 B206 SH100 $62.16
SH200 5/16 2-1/2 3/4 1/4 B206 SH200 $68.84
SH500 1/2 3 1 -1/4 1/4 B206 SH500 $141.83
SH600 5/8 3-3/16 1 -7/16 1/4 B206 SH600 $195.01
Ball Shape
SH700 3/4 3-3/8 1 -5/8 1/4 B206 SH700 $248.23
METRIC
Double Cut
SH200 7.9 64.0 19.1 6.0 B306 SH200 $68.84
SH500 12.7 70.0 25.4 6.0 B306 SH500 $141.83
SH600 15.9 70.0 25.4 6.0 B306 SH600 $195.01
Flame Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B206
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
B306
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
183
184
184 184
Carbide Burs Taper Shape
Aluminium Cut
SL4AC 1/2 2-7/8 1-1/8 1/4 14 B220 SL4AC $163.73
SL6AC 5/8 3-1/16 1-5/16 1/4 14 B220 SL6AC $299.30
SL7AC 3/4 3-1/4 1-1/2 1/4 14 B220 SL7AC $349.39
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B207
• • •
• • •
• •
• •
• •
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
B214
B220
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
184
185
Carbide Burs Taper Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B307
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
185
Cylindrical Square Cylindric
186 186
Carbide Burs Cone Shape
METRIC
Double Cut
SM300 6.0 51.0 25.4 6.0 12° B308 SM300 $57.57
SM400 9.5 64.0 19.1 6.0 28° B308 SM400 $84.48
SM500 12.7 70.0 25.4 6.0 28° B308 SM500 $106.36
SM600 15.9 73.0 28.6 6.0 31° B308 SM600 $143.92
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B208
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
• •
B308
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
186
Cylindrical Square Cylindrical Round
187
Carbide Burs Inverted Cone Shape
ISO P M K N S H
VDI 3323 1 2 3 4 5 6 7 8 9 10 11 12 13 14.1 14.2 14.3 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37.1 37.2 37.3 37.4 37.5 38.1 38.2 39.1 39.2 40 41
B209
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
P Steel M Stainless Steel K Cast Iron N Non-Ferrous Metals S Titanium & Super Alloys H Hard Materials • Optimal • Effective
187
188
Carbide Burs Sets
188
Carbide Burs Die Grinder Kit
Sutton Tools Die Grinder is the perfect tool for detailed metal or woodwork
providing precise clean cuts. Use it with Sutton Tools range of carbide burs to
sculpt and shape harder materials.
Suitable for grinding back and neatening welds, porting, polishing and
woodworking applications.
Features:
• Quick release attachment
• Trigger with safety latch prevent accidental operation
• Adjusting knob controls speed of rotation
Specifications:
• Collet capacity: 1/8, 1/4, 3 & 6mm
• No load speed: 25,000 RPM
• Air Pressure: 90 PSI
• Overall Length: 165mm
• Net Weight: 557g
Note: Reduce cutting speeds by 50% when using long shank carbide burs.
189
190
OTHERS
• Literature • Cutting Lubricant
Others Black Books
Large Edition
Engineers Black Book - 234 Pages of: Electrical Black Book - 212 Pages of: Fastener Black Book - 248 Pages of:
• Tables • G Codes • Electrical safety laws of electricity • Screw thread • Hydrogen
• Standards • Hardening and electrical conductors fundamentals embrittlement
• Illustrations tempering • Electrical codes and standards • Standards • Screw thread profiles
• Grinding wheels • Formulae • Electrical conduit and conduit bending • Heat treatment • Dimensional
• Geometrical • Electrical formulae and conversion • Thread classes specifications
• Conversion factors DIN / ISO / ANSI
construction factors transformers and motors • Grades
• Tapers • Galling
• Weights of metal • Electrical socket-outlets, switches • Materials and
• Lubricants-coolants and enclosures • Material selection
• Engineering drawing coatings
• Bolts and nuts standards • Led lighting, fibre optics and data cabling • Torque control
• Failures and
• Spur gear • Tolerances and more… corrosion • Platings
calculations
• Keys and keyways • Thread terminology • Elevated
• Tungsten carbide temperature
• Tapping drill sizes • Tolerances
• Plastics effects
• Speeds & feeds • Fastener strengths
• Sharpening and markings
information • Equivalent charts
and more…
192
Others Cutting Lubricant, Venom
VENOM
VENOM
VENOM
75 100 100
tool protection
• Not affected by coolant 0
Aluminium Carbon Steel
0
Aluminium
0
Carbon Steel
• Lowest torque required for
higher performance Tests were conducted using a M6 forming tap in carbon steel and aluminium. Venom
Competitor X
The results clearly indicate less torque* was required using Sutton Tools Venom
• Reduced friction for extremely M800 0400 Cutting Fluid & Paste compared with leading brands on the market. Competitor Y
Competitor Z
high quality surface finish *Less torque indicates improved performance.
Features
• Reduces torque and friction
• Extends tool life
• Improves surface finish
• Accurate thread quality
• Environmentally friendly mineral oil base
with 10% organic coconut oil.
Free from Trichloroethane – low odour.
CUTTING SPRAY
Features
• Comfort nozzle allows an accurate spray
flow in hard-to-reach working areas
• Precise spray flow within 1.5m range
• Non-flammable
• Reduces torque and friction
• E xtends tool life
• Improves surface finish
• Accurate thread quality
• Environmentally friendly mineral oil base
with 10% organic coconut oil. Free from
trichloroethane – low odour.
• Suitable for use in non-ventilated areas
M800 0300
193
194
TECHNICAL INFO
• Speeds & feeds charts • Troubleshooting
• General • Drills • Taps • Endmills • Reamers
Regrinding Service…
Reduce your production costs
Sutton Tools continue to reinvest to provide a ‘complete’ range in cutting Send & Return Service
tool products and services. Our regrinding service returns tools to ‘as new’ Sutton Tools re-sharpening boxes will be
condition. Quality is guaranteed from the CNC grinding machines which provided for safe shipment of your tools
are operated by highly experienced personnel, using advanced technology. for servicing. Simply fill in the request
A full regrinding service is offered in Europe. HSS and carbide tooling can form, and we will return the tools to ‘as
be reconditioned by our highly experienced personnel, with reproducible, new’ condition as instructed. Contact us
high quality results, every time. for your Sutton Tools re-sharpening box
and request form.
We regrind HSS Powdered Metallurgy and grades of Solid Carbide,
complemented by fifth generation thin film coatings.
Taps
Chamfer type/length...............................................................................................224
Construction dimensions/designs.....................................................................224
Fluteless taps............................................................................................................230
ISO metric tap class & tolerance........................................................................234
Lubricants...................................................................................................................227
Speeds & feeds.........................................................................................................204
Tap geometry.............................................................................................................226
Tap hole types...........................................................................................................225
Tap terminology........................................................................................................223
Tap types.....................................................................................................................225
Tapping drill................................................................................................................227
Tapping drill size chart (Fluteless)......................................................................231
Tapping drill formula...............................................................................................227
Tapping drill size chart............................................................................................228
Tapping information................................................................................................227
Thread limits..............................................................................................................233
Thread systems
- ISO Metric................................................................................................................232
- ISO Pipe....................................................................................................................237
- Unified.......................................................................................................................235
- Whitworth................................................................................................................236
Tap styles....................................................................................................................224
Troubleshooting - Taps...........................................................................................211
197
Application Guide Materials - Workpiece
Material Group WKR DIN BS EN AFNOR UNI UNE SS JIS AISI / SAE / UNS
ISO VDI^ Germany Germany U.K. U.K. France Italy Spain Sweden Japan USA
3323
6/7 1.7131 16 MnCr 5 527 M 17 16 MC 5 16 MnCr 5 F.1516 2511 SCR 415 5115, G 51170
6/7 1.5622 14 Ni 6 16 N 6 14 Ni 6 15Ni6 A350LF5
6/7 1.5415 15 Mo 3 1501-240 15 D 3 16 Mo 3 16Mo3 2912 A204GrA
3310, 3415, 9314,
6/7 1.5752 14 NiCr 14 655 M 13 36A 12 NC 15 SNC 815 (H) G 33106
6/7 1.6587 17 CrNiMo 6 820 A 16 18 NCD 6 18 NiCrMo 7
6/7 1.7262 15 CrMo 5 12 CD 4 12 CrMo 4 12CrMo4 2216
P 1501-620
6/7 1.7335 13 CrMo 4-4 Gr. 27 15 CD 3.5 14 CrMo 4 5 14CrMo45 2216 A 182-F11, F12
1501-622 Gr.
6/7 1.7380 10 CrMo 9-10 31, 45 10 CD 9.10 12 CrMo 9 10 F.155 2218 A 182-F22, J 21890
1503-660-
6/7 1.7715 14 MoV 6-3 440
6/7 1.7015 10 Cr 3 523 M 15 12 C 3 SCr 415 (H) 5015, G 50150
6/8 1.7033 34 Cr 4 530 A 32 18B 32 C 4 34 Cr 4 (KB) SCr 430 (H) 5132, G 51320
SCM 420,
6/8 1.7218 25 CrMo 4 1717 CDS 110 25 CD 4 S 25 CrMo 4 (KB) F.1251 2225 SCM 430 4130, G 41300
6/8 1.6523 21 NiCrMo 2 805 M 20 362 20 NCD 2 20 NiCrMo 2 F.1522 2506 SNCM 220 (H) 8620, G 86170
SCM 432,
6/9 1.7220 34 CrMo 4 708 A 37 35 CD 4 35 CrMo 4 2234 SCCrM 3 4135, 4137, G 41350
6/9 1.7225 42 CrMo 4 708 M 40 42 CD 4 42 CrMo 4 2244 SCM 440 (H) 4140, 4142, G 41400
6/9 1.8509 41 CrAIMo 7 905 M 39 41B 40 CAD 6.12 41 CrAlMo 7 SACM 645 A355GrA, K 24065
6/9 1.0961 60 SiCr 7 60 SC 7 60 SiCr 8 9262
6/9 1.2067 100 Cr 6 BL 3 L 3, T 61203
6/9 1.2419 105 WCr 6 105 WC 13 107 WCr 5 KU 2140 SKS 31
6/9 1.2542 45 WCrV 7 BS 1 45 WCrV 8 KU 2710 S 1, T 41901
6/9 1.2713 55 NiCrMoV 6 55 NCDV 7 F.520.S SKT 4 L 6, T 61206
6/9 1.7035 41 Cr 4 530 M 40 18 42 C 4 41 Cr 4 SCr 440 (H) 5140, G 51400
6/9 1.7176 55 Cr 3 527 A 60 48 55 C 3 55 Cr 3 2253 SUP 9 (A) 5155, G 51550
6/9 1.6546 40 NiCrMo 2-2 311-Type 7 40 NCD 2 40 NiCrMo 2 (KB) SNCM 240 8740, G 87400
6/9 1.6511 36 CrNiMo 4 816 M 40 110 40 NCD 3 38 NiCrMo 4 (KB) 9840, G 98400
6/9 1.6582 34 CrNiMo 6 817 M 40 24 35 NCD 6 35 NiCrMo 6 (KW) 2541 SNCM 447 4340
6/9 1.7361 32 CrMo 12 722 M 24 40B 30 CD 12 32 CrMo 12 2240
6/9 1.8159 50 CrV 4 735 A 50 47 50 CV 4 51 CrV 4 51CrV4 2230 SUP 10 6145, 6150
6/9 1.8523 39 CrMoV 13-9 897 M 39 40C 36 CrMoV 13 9
6/9 1.8161 58 CrV 4
10 /11 1.5680 12 Ni 19 Z 18 N 5 2515
10 /11 1.2363 X100 CrMoV 5-1 BA 2 Z 100 CDV 5 X 100 CrMoV 5 1 KU F.5227 2260 SKD 12 A 2, T 30102
10 /11 1.2436 X210 CrW 12 X 215 CrW 12 1 KU F.5213 2312 SKD 2 D4
10 /11 1.2601 X165 CrMoV 12 X 165 CrMoW 12 KU 2310
Z 85 WDCV
10 /11 1.3343 S 6-5-2 BM 2 06.05.04.02 HS 6-5-2 2722 SKH 51 M 2, T 11302
10 /11 1.2344 X40 CrMoV 5-1 BH 13 Z 40 CDV 5 X 40 CrMo 5 1 1 KU F.5318 2242 SKD 61 H 13, T 20813
198
Material Group WKR DIN BS EN AFNOR UNI UNE SS JIS AISI / SAE / UNS
ISO VDI^ Germany Germany U.K. U.K. France Italy Spain Sweden Japan USA
3323
10 /11 1.2581 X30 WCrV 9-3 BH 21 Z 30 WCV 9 X 30 WCrV 9 3 KU SKD 5 H 21, T 20821
10 /11 1.2080 X210 Cr 12 BD 3 Z 200 C 12 X 210 Cr 13 KU SKD 1 D 3, T 30403
Z 85 WDKCV
10 /11 1.3243 S 6-5-2-5 BM 35 06.05.05.04.02 HS 6-5-2-5 HS 6-5-2-5 2723 SKH 55 M35
Z 100 DCWV
10 /11 1.3348 S 2-9-2 09.04.02.02 HS 2-9-2 HS 2-9-2 2782 M 7, T 11307
Z 80 WKCV
10 /11 1.3255 S 18-1-2-5 BT 4 18.05.04.0 HS 18-1-1-5 HS 18-1-1-5 SKH 3 T 4, T 12004
Z 80 WCV
10 /11 1.3355 S 18-0-1 BT 1 18.04.01 HS 18-0-1 HS 18-0-1 SKH 2 T 1, T 12001
10 /11 1.4718 X45 CrSi 9-3 401 S 45 52 Z 45 CS 9 X 45 CrSi 8 SUH 1 HNV 3, S 65007
12 /13 1.4104 X12 CrMoS 17 420 S 37 Z 10 CF 17 X 10 CrS 17 F.3117 2383 SUS 430 F 430 F, S 43020
14.1 1.4310 X10 CrNi 18-8 301 S 21 Z 12 CN 17.07 X2CrNi18 07 F.3517 2331 SUS 301 301, S 30100
14.1 1.4401 X5 CrNiMo 17-12-2 316 S 31 58J Z 6 CND 17.11 X 5 CrNiMo 17 12 F.3543 2347 SUS 316 316, S 31600
Z 2 CND 17.13 X 2 CrNiMoN 17 13 3
14.1 1.4429 X2CrNiMoN 17-13-3 316 S 62 Az 2375 SUS 316 LN 316 LN, S 31653
14.2 1.4878 X12 CrNiTi 18-9 321 S 51 58B Z6CNT18.12B F.3523 2337 SUS 321 321
14.2 1.4541 X14 CrNiTi 18-10 321 S 12 Z 6 CNT 18.10 X 6 CrNiTi 18 11 F.3523 2337 SUS 321 321 H, S 32100
14.2 1.4550 X6 CrNiNb 18-10 347 S 17 58F Z 6 CNNb 18.10 X 6 CrNiNb 18 11 F.3524 2338 SUS 347 347, S 34700
14.3 1.4545 X5CrNiCuNb15-5-4 EZ5CNU15-05 S15500, 15-5 PH
14.3 1.4542 X5CrNiCuNb16-4 Z6CNU17-04 S17400, 17-4 PH; 630
180, 200/220, 200/225, 25B, 30,
15 /16 0.6020 GG 20 220, Grade180, FGL200, Ft20D G 20 FG20 120 FC200 30B
Grade260
15 0.6010 GG-10 100 FT 10 D G10 0110-00 FC100
15 0.6015 GG 15 Grade 150 FT 15 D G 15 FG 15 0115-00 FC150 NO 25 B
15 0.6660 GGL-NiCr202 L-NiCuCr202 L-NC 202 0523-00 A436 Type 2
15 0.7040 GGG 40 SNG 420/12 FCS 400-12 GS400-12 FGE 38-17 0717-02 FCD400 60-40-18
300/325, 40B,
16 0.6030 GG30 Grade 300 Ft 30 D G30 FG30 01 30-00 FC300 45/50, 45B
16 0.6035 GG-35 GRADE 350 Ft35D G 35 FG 35 135 FC350 A48-50
16 0.6040 GG40 GRADE400 Ft 40 D 140 A48-60 B
FCD700,
16 0.7070 GGG-70 SNG700/2 EN-JS1070 FGS 700-2 GGG 70 GGG 70 07 37-01 FCD700-2 100-70-03
Ni-ResistD-5B,
17 0.7033 GGG35.3 07 17-15 S-NiCr35-3
17 0.7043 GGG-40.3 370/7 EN-JS1025 FGS 370/17 0717-15 FCD400-18L 60/40/18
K FCD500, 65-45-12, 70-50-05,
17 0.7050 GGG50 SNG500/7 EN-JS1050 FGS 500/7 GGG 50 FGE50-7 0727-02 FCD500-7 80-55-06
17 0.7652 GGG-NiMn 13 7 S-NiMn 137 S-Mn 137
A43D2, Ni-ResistD-2,
17 0.7660 GGG-NiCr 20 2 Grade S6 S-NC 202 0772-00 S-NiCr20-2
18 0.6025 GG25 Grade260 Ft 25 D G25 FG25 0717-12 250/275, 35, 35B, 40
100-70-03, 80-55-06,
18 0.7060 GGG60 SNG600/3 EN-JS1060 FGS600-3 G 25 FG 25 07 32-03 FC250 80-60-03
18 0727-03 FCD600 A48 40 B
19 0.8055 GTW55
19 0.8135 GTS-35-10 B 340/2 Mn 35-10 GTS 35 810
19 0.8145 GTS-45-06 P 440/7 Mn 450-6 0815-00 A220-40010
19 GTS-35 B 340/12 0852-00 GMN 45
19 8 290/6 MN 32-8
19 GTS-35 B340/12 MN 35-10 0810-00 32510
199
Application Guide Materials - Workpiece
Material Group WKR DIN BS EN AFNOR UNI UNE SS JIS AISI / SAE / UNS
ISO VDI^ Germany Germany U.K. U.K. France Italy Spain Sweden Japan USA
3323
201
Application Guide Speeds & Feeds - HSS / Carbide Drills
STUB JOBBER
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined
by referring to the workpiece material cross
reference listing. Refer to main index of this section.
Catalogue Code D186 / D100 D101 D102 D103 D179 D109 D180 D202
For expert tooling recommendations, go to: Material HSS HSS HSS Co HSS HSS Co
www.suttontools.com/expert-tool-selector
Surface Finish Blu Brt Blu TiN TiAlN Tip Colour Tempered TiAlN Tip Colour Tempered
Sutton Designation N N Hard Materials VA N
Geometry R30 R30 R25 R40 L30
Drilling Depth ≤ 3xØ ≤ 5xØ - ≤ 3xØ ≤ 5xØ
ISO VDI^ Material Condition HB N/mm2 Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed #
3323
Notes on Drilling
1. Step feeding or pecking is required for drilling greater than 3 x Ø.
2. W
hen drilling cast surface & black (ie: not machined surface), reduce drilling speed by 20%.
3. For optimal positional accuracy and hole size, the use of spot drills is recommended prior to drilling desired hole, refer to our standard range (D175).
4. F or hole depths greater than 7 x Ø, pre-drill initially to pilot start for more accurate hole position and eliminate drill wandering. The pilot can be drilled
with short rigid drill, approximately. 3 x Ø in depth and reduced feed to ensure accurate pilot hole.
202
LONG SERIES EXTRA LENGTH TAPER SHANK REDUCED SHANK COUNTERBORES & COUNTERSINKS CARBIDE
D113 D187 D141 D115 D140 D120 / D188 C105 C106 C100 D368 D371
HSS HSS HSS Co HSS HSS HSS HSS HSS Co VHM VHM
Blu Brt Colour Temp Blu Blu Blu Brt TiN Brt Brt AlCrN Tip
N N Tough Mat N N N Machine Use N N N
R30 R30 R30 R30 R30 R30 90° - R25 R30 - IK
≤ 7xØ - ≤ 5xØ ≤ 5xØ ≤ 8xØ ≤ 5xØ - - ≤ 5xØ ≤ 12xØ
Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # VDI^
3323
ISO
16 5 16 5 38 5 32 5 5 5 32 5 25 3 31 3 30 3 55 6 80 8 1
13 5 8 5 38 5 32 5 5 5 32 5 21 3 25 3 30 3 55 6 80 8 2
10 5 8 5 30 5 25 5 5 5 25 5 21 2 25 2 30 3 50 6 60 7 3
10 5 8 5 30 5 25 5 5 5 25 5 21 2 25 2 30 3 50 6 60 7 4
- - 8 4 18 4 15 4 4 4 15 4 - - 11 1 12 1 40 6 50 6 5
10 5 8 5 30 5 25 5 5 5 25 5 21 2 25 2 30 3 55 6 60 7 6
10 4 8 4 30 4 25 4 4 4 25 4 12 2 15 2 15 2 50 6 60 7 7 P
- - 8 4 18 4 15 4 4 4 15 4 - - 11 1 12 1 40 6 50 6 8
- - - - - - - - - - - - - - - - 10 1 - - - - 9
10 5 8 4 18 4 15 4 4 4 15 4 10 1 11 1 12 1 - - 50 6 10
- - - - - - - - - - - - - - - - 10 1 - - - - 11
- - - - 10 4 - - - - - - - - - - 14 1 - - - - 12
- - - - - - - - - - - - - - - - 10 1 - - - - 13
7 4 - - 12 4 8 4 4 4 8 4 - - 10 2 16 2 - - 40 5 14.1
- - - - 10 4 - - - 4 6 4 - - 8 1 12 1 - - 30 4 14.2 M
- - - - 10 4 - - - - - - - - 8 1 14 1 - - - - 14.3
16 6 10 6 38 5 32 5 5 5 32 5 17 2 20 2 25 2 85 3 80 8 15
13 5 8 5 30 5 25 5 5 5 - - 17 2 20 2 16 2 55 3 70 8 16
13 6 8 6 25 5 20 5 5 5 20 5 15 2 15 2 20 2 85 3 60 7 17
K
13 6 8 6 25 5 20 5 5 5 - - 15 2 15 2 20 2 55 3 60 7 18
13 6 8 6 25 5 20 5 5 5 20 5 15 2 15 2 20 2 - - 60 7 19
13 6 8 6 25 5 20 5 5 5 - - 15 2 15 2 20 2 - - 60 7 20
20 5 21 6 96 6 - - - - 80 6 34 4 41 4 80 4 100 4 - - 21
20 5 21 6 96 6 - - - - 80 6 34 4 41 4 80 4 100 4 - - 22
- - 13 5 72 5 - - - - 60 5 25 3 31 3 60 3 100 4 - - 23
- - 13 5 72 5 - - - - 60 5 25 3 31 3 60 3 80 4 - - 24
- - - - - - - - - - - - - - - - - - 80 4 - - 25
N
- - 21 5 30 6 - - - - 25 6 55 2 66 2 80 2 - - - - 26
- - 13 5 19 3 - - - - 16 3 34 2 40 2 - - - - - - 27
- - - - 38 6 - - - - 32 6 42 2 50 2 80 2 - - - - 28
- - - - - - - - - - - - - - - - - - 120 3 - - 29
- - - - - - - - - - - - - - - - - - - - - - 30
- - - - - - - - - - - - - - - - - - - - - - 31
- - - - - - - - - - - - - - - - - - - - - - 32
- - - - - - - - - - - - - - - - - - - - - - 33
- - - - - - - - - - - - - - - - - - - - - - 34
- - - - - - - - - - - - - - - - - - - - - - 35
- - - - - - - - - - - - - - - - - - - - - - 36 S
- - - - - - - - - - - - - - - - - - - - - - 37.1
- - - - - - - - - - - - - - - - - - - - - - 37.2
- - - - - - - - - - - - - - - - - - - - - - 37.3
- - - - - - - - - - - - - - - - - - - - - - 37.4
- - - - - - - - - - - - - - - - - - - - - - 37.5
- - - - - - - - - - - - - - - - - - - - - - 38.1
- - - - - - - - - - - - - - - - - - - - - - 38.2
- - - - - - - - - - - - - - - - - - - - - - 39.1
H
- - - - - - - - - - - - - - - - - - - - - - 39.2
13 5 8 5 30 5 25 5 5 5 25 5 17 2 20 2 16 2 - - 70 8 40
- - - - - - - - - - - - - - - - - - - - - - 41
Feed Table (f) (mm/rev)
Feed # METRIC DRILLS (mm size)
Ø 1 2 3 4 5 6 7 8 9 10
2.0 vc × 1000 vc
0.020 0.025 0.030 0.040 0.050 0.060 0.075 0.095 0.120 0.15
Ø = nominal tap size (mm) n= x 318
3.0 0.030 0.035 0.045 0.055 0.070 0.090 0.110 0.135 0.17 0.21 Ø×π Ø
4.0 0.040 0.045 0.060 0.075 0.090 0.115 0.140 0.18 0.22 0.27
n = spindle speed (RPM)
5.0 0.045 0.055 0.070 0.090 0.110 0.135 0.17 0.21 0.26 0.32 nxØ×π nxØ
6.0
8.0
0.055
0.070
0.065
0.085
0.080
0.105
0.100
0.130
0.125
0.16
0.16
0.20
0.19
0.25
0.24
0.31
0.30
0.38
0.37
0.47
vc = cutting speed (m/min) vc = 1000 318
10.0 0.085 0.105 0.125 0.16 0.19 0.24 0.30 0.37 0.46 0.56 f = feed (mm/rev)
12.0 0.095 0.120 0.15 0.18 0.23 0.28 0.34 0.42 0.52 0.64
16.0 0.125 0.15 0.19 0.23 0.29 0.36 0.44 0.54 0.66 0.82 vf = feed rate (mm/min) vf = fxn
20.0 0.15 0.18 0.23 0.28 0.34 0.42 0.52 0.64 0.80 0.98
25.0 0.18 0.22 0.27 0.33 0.41 0.50 0.60 0.74 0.90 1.10
32.0 0.23 0.27 0.33 0.41 0.50 0.60 0.74 0.88 1.10 1.30
38.0 0.26 0.32 0.38 0.46 0.56 0.68 0.82 1.00 1.20 1.45
45.0 0.30 0.36 0.43 0.52 0.64 0.76 0.92 1.10 1.35 1.60
52.0 0.33 0.40 0.48 0.58 0.70 0.84 1.00 1.20 1.45 1.75
63.0 0.39 0.47 0.56 0.67 0.80 0.96 1.14 1.35 1.65 1.95
203
Application Guide Speeds & Feeds - Taps
ISO VDI Material Group Sutton FOR BLIND & THROUGH HOLES FOR THROUGH HOLES
P A Steel N
M R Stainless Steel VA
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined
by referring to the workpiece material cross
reference listing. Refer to main index of this section.
For expert tooling recommendations, go to:
www.suttontools.com/expert-tool-selector
Catalogue Code M T384 / T385 / T386 / T901 T387 / T388 T393 T394 T395
MF T401 / T402 / T403 / T902 T404 / T405 T406 T407 T408
UNC T414 / T415 / T416 / T903 T417 / T418 T422 T423 T424
UNF T431 / T432 / T433 / T904 T434 / T435 T439 T440 T441
BSW T451 / T452 / T453 / T905 T454 / T455 T457 T458 T459
BSF, BA, BSB (Brass) T466 / T467 / T468 / T906 - - - -
G (BSPF) T479 / T480 / T481 / T909 T482 / T483 T484 - -
BSPT T475 T476 - - -
Material HSS HSSE
Surface Finish Brt TiN Brt Blu TiN
Sutton Designation N N
Geometry
Thread Depth ≤ 1xØ ≤ 3xØ
ISO VDI^ Material Condition HB N/mm2 Vc (m/min) Vc (m/min)
3323
204
FOR BLIND HOLES FOR BLIND & THROUGH HOLES
≤ 2.5xØ ≤ 1.5xØ
Vc (m/min) Vc (m/min) VDI^ ISO
3323
10 11 14 12 18 1
10 11 14 12 18 2
8 9 12 - 15 3
9 10 13 - 17 4
- - 11 - - 5
10 11 14 - 18 6
6 7 10 - - 7 P
- - 7 - - 8
- - - - - 9
6 7 10 - - 10
- - - - - 11
- 4 6 - - 12
- - - - - 13
- 5 7 - 9 14.1
- 4 5 - 6 14.2 M
- 3 4 - - 14.3
10 11 14 - - 15
- - 12 - - 16
10 11 14 - - 17
K
- - 12 - - 18
12 13 18 - - 19
10 11 14 - - 20
10 - 14 12 18 21
12 - 18 15 23 22
12 - 18 15 23 23
12 - 18 15 23 24
- - - - - 25
N
6 - 10 8 12 26
14 - 22 - - 27 Notes on Tapping
- - - 14 21 28 1. The speeds listed above are a recommendation only, and are based
- - - - - 29 on depth of thread listed, speeds can be adjusted on application.
- - - - - 30 As a general rule;
- - - - - 31 -If hole depth required is less than above mentioned = increase speed
- - - - - 32 -If hole depth required is more than above mentioned = reduce speed
- - - - - 33 2. Taps must be driven by the square to eliminate slippage, eg, ER-GB
- - - - - 34 collets (square drive).
- - - - - 35 3. When using spiral flute taps with length compensation tapping
- - - - - 36 S attachment, it is recommended to short pitch the feed 95%,
- - - - - 37.1 to eliminate tap cutting oversize, eg. M6x1 @ 1000RPM, Feedrate=
- - - - - 37.2 950mm/min.
- - - - - 37.3
- - - - - 37.4
- - - - - 37.5 METRIC TAPS (mm size)
- - - - - 38.1 Ø = nominal tap size (mm) vc × 1000 vc
P = thread pitch (mm) n= x 318
- - - - - 38.2 Ø×π Ø
n = spindle speed (RPM)
- - - - - 39.1 nxØ×π nxØ
H vc = cutting speed (m/min) vc = 1000 318
- - - - - 39.2
vf = feed rate (mm/min)
- - - - - 40 vr = feed rate per rev (mm/rev) vf = nxP
- - - - - 41
205
Application Guide Speeds & feeds - HSS Endmills
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined
by referring to the workpiece material cross Catalogue Code E179 / E100 E102 / E225 E226 E184 E187
Material HSS Co.8
reference listing. Refer to main index of this section. HSS Co.8 HSS Co.8
For expert tooling recommendations, go to:
Surface Finish Brt Brt TiCN TiAlN Brt
www.suttontools.com/expert-tool-selector Sutton Designation N N N
Geometry R30 R30 R30
Type of Cut: Slotting • • • • •
Finishing •
Universal •
Roughing
Profiling
ap × Ø 0.5 0.5 0.5 0.5 0.5 1.5 1.5
ae × Ø 1.0 1.0 1.0 1.0 1.0 0.1 0.25
ISO VDI^ Material Condition HB N/mm2 Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed #
3323
1 Steel - Non-alloy, ~ 0.15 %C A 125 440 30 6 18 5 22 5 22 5 30 6 40 5 40 5
2 cast & free cutting ~ 0.45 %C A 190 640 30 6 18 5 22 5 22 5 30 6 40 5 40 5
3 QT 250 840 30 6 18 5 22 5 22 5 30 6 40 5 40 5
4 ~ 0.75 %C A 270 910 30 6 18 5 15 5 22 5 30 6 40 5 40 5
5 QT 300 1010 20 5 12 4 22 4 15 4 20 5 25 4 25 4
6 Steel - Low alloy & cast A 180 610 30 6 18 5 18 5 22 5 30 6 40 5 40 5
P 7 < 5% of alloying elements QT 275 930 25 5 15 4 15 4 18 4 25 5 30 4 30 4
8 QT 300 1010 20 5 12 4 11 4 15 4 20 5 25 4 25 4
9 QT 350 1180 - - - - - - - - - - - - - -
10 Steel - High alloy, cast & tool A 200 680 20 5 12 4 11 4 15 4 20 5 25 4 25 4
11 HT 325 1100 - - - - - - - - - - - - - -
12 Steel - Corrosion Ferritic / Martensitic A 200 680 - - - - 11 4 11 4 - - 10 3 10 3
13 resistant & cast Martensitic QT 240 810 15 4 9 3 11 3 11 3 15 4 22 4 22 4
14.1 Stainless Steel Austenitic AH 180 610 - - - - 11 4 11 4 - - - - - -
M 14.2 Duplex 250 840 - - - - 9 2 9 2 - - - - - -
14.3 Precipitation Hardening 250 840 - - - - - - - - - - - - - -
15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610 30 5 18 4 18 4 21 4 30 5 35 4 35 4
16 Pearlitic 260 880 25 4 15 3 18 3 18 3 25 4 25 3 25 3
17 Cast Iron - Nodular Ferritic 160 570 20 3 12 2 15 2 15 2 20 3 22 3 22 3
K (GGG)
18 Pearlitic 250 840 20 3 12 2 15 2 15 2 20 3 22 3 22 3
19 Cast Iron - Malleable Ferritic 130 460 20 3 12 2 15 2 15 2 20 3 22 3 22 3
20 Pearlitic 230 780 20 3 12 2 15 2 15 2 20 3 22 3 22 3
21 Aluminum & Magnesium Non Heat Treatable 60 210 70 6 42 5 51 5 51 5 70 6 70 6 70 6
22 - wrought alloy Heat Treatable AH 100 360 70 6 42 5 51 5 51 5 70 6 70 6 70 6
23 Aluminum & Magnesium Non Heat Treatable 75 270 50 5 30 4 33 4 33 4 50 5 55 5 55 5
24 - cast alloy ≤12% Si Heat Treatable AH 90 320 50 5 30 4 33 4 33 4 50 5 55 5 55 5
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460 30 6 18 5 21 5 21 5 30 6 - - - -
N
26 Copper & Cu alloys Free cutting, Pb > 1% 110 390 25 5 15 4 18 4 18 4 25 5 40 5 40 5
27 (Brass/Bronze) Brass (CuZn, CuSnZn) 90 320 - - - - - - - - - - - - - -
28 Bronze (CuSn) 100 360 50 6 30 5 33 5 33 5 50 6 70 6 70 6
29 Non-metallic - Thermosetting & fiber-reinforced plastics - - - - - - - - - - - - - -
30 Non-metallic - Hard rubber, wood etc. - - - - - - - - - - - - - -
31 High temp. alloys Fe based A 200 680 - - - - - - - - - - - - - -
32 AH 280 950 - - - - - - - - - - - - - -
33 Ni / Co based A 250 840 - - - - - - - - - - - - - -
34 AH 350 1180 - - - - - - - - - - - - - -
35 C 320 1080 - - - - - - - - - - - - - -
S 36 Titanium & Ti alloys CP Titanium 400 MPa - - - - - - - - - - - - - -
37.1 Alpha alloys 860 MPa - - - - - - - - - - - - - -
37.2 Alpha / Beta A 960 MPa - - - - - - - - - - - - - -
37.3 alloys AH 1170 MPa - - - - - - - - - - - - - -
37.4 Beta alloys A 830 MPa - - - - - - - - - - - - - -
37.5 AH 1400 MPa - - - - - - - - - - - - - -
38.1 Hardened steel HT 45 HRC - - - - - - - - - - - - - -
38.2 HT 55 HRC - - - - - - - - - - - - - -
39.1 HT 58 HRC - - - - - - - - - - - - - -
H
39.2 HT 62 HRC - - - - - - - - - - - - - -
40 Cast Iron Chilled C 400 1350 - - - - - - - - - - 25 3 25 3
41 HT 55 HRC - - - - - - - - - - - - - -
• •
•
• • •
• •
1.5 1.5 1.5 1.0 1.0 1.0 0.05 0.05
0.1 0.25 0.1 0.5 0.5 0.5 0.02-0.05 0.02
Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # VDI^ ISO
3323
40 4 40 5 50 4 40 9 36 5 40 5 40 5 50 5 1
40 4 40 5 50 4 40 9 36 5 40 5 40 5 50 5 2
40 4 40 5 50 4 40 9 36 5 40 5 40 5 50 5 3
40 4 40 5 50 4 40 9 36 5 40 5 40 5 50 5 4
25 3 25 4 30 3 25 7 - - 40 5 30 4 40 4 5
40 4 40 5 50 4 40 9 36 5 40 5 40 5 50 5 6
30 3 30 4 40 4 30 9 - - 40 5 35 4 45 4 7 P
25 3 25 4 30 3 25 7 - - 40 5 30 4 40 4 8
- - - - 25 3 - - - - - - - - 25 4 9
25 3 25 4 30 3 25 7 - - - - 30 4 40 4 10
- - - - 25 3 - - - - - - - - 25 4 11
10 2 10 3 12 2 10 4 - - - - - - 18 4 12
22 3 22 4 25 3 22 6 - - - - - - 25 4 13
- - - - 20 3 - - - - - - 20 4 25 4 14.1
- - - - 15 1 - - - - - - 15 2 20 2 14.2 M
- - - - 12 2 - - - - - - - - 18 4 14.3
35 3 35 4 40 3 35 9 - - 50 8 40 4 50 4 15
25 2 25 3 30 2 25 9 - - - - 30 3 35 3 16
22 2 22 3 - - 22 9 - - 20 8 25 2 30 2 17
K
22 2 22 3 - - 22 9 - - - - 25 2 30 2 18
22 2 22 3 - - 22 9 - - 20 8 25 2 30 2 19
22 2 22 3 - - 22 9 - - - - 25 2 30 2 20
70 5 70 6 75 5 70 15 80 9 90 9 80 6 100 6 21
70 5 70 6 75 5 70 15 80 9 90 9 80 6 100 6 22
55 4 55 5 60 4 55 15 55 8 65 8 55 5 70 5 23
55 4 55 5 60 4 55 15 55 8 65 8 55 5 70 5 24
- - - - 50 4 - - - - - - 50 5 60 5 25
N
40 4 40 5 40 4 40 14 30 6 35 6 25 5 30 5 26
- - - - - - - - - - - - - - - - 27
70 5 70 6 75 5 70 14 40 6 50 6 50 6 60 6 28
- - - - - - - - - - - - - - - - 29
- - - - - - - - - - - - - - - - 30
- - - - - - - - - - - - - - - - 31
- - - - - - - - - - - - - - - - 32
- - - - - - - - - - - - - - - - 33
- - - - - - - - - - - - - - - - 34
- - - - - - - - - - - - - - - - 35
- - - - - - - - - - - - - - - - 36 S
- - - - - - - - - - - - - - - - 37.1
- - - - - - - - - - - - - - - - 37.2
- - - - - - - - - - - - - - - - 37.3
- - - - - - - - - - - - - - - - 37.4
- - - - - - - - - - - - - - - - 37.5
- - - - - - - - - - - - - - - - 38.1
- - - - - - - - - - - - - - - - 38.2
- - - - - - - - - - - - - - - - 39.1
H
- - - - - - - - - - - - - - - - 39.2
25 - 25 3 - 3 25 9 - - - - - - 35 3 40
- - - - - - - - - - - - - - - - 41
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined
by referring to the workpiece material cross Catalogue Code E134 E150 E151 E118 E111 E121
Material
reference listing. Refer to main index of this section. SPM SPM SPM SPM HSS Co.8 SPM
For expert tooling recommendations, go to:
Surface Finish TiAlN TiAlN TiAlN TiAlN Brt
www.suttontools.com/expert-tool-selector Sutton Designation UNI UNI UNI Al W
Geometry R30/32 R30 NR R45 HRS R30 R40 R45
Type of Cut: Slotting • •
Finishing • •
Universal • •
Roughing • •
Profiling •
ap × Ø 1.5 1.5 1.0 1.0 0.05 0.5 0.5 1.5 1.5
ae × Ø 0.1 0.25 0.5 0.5 0.02-0.05 1.0 1.0 0.1 0.25
ISO VDI^ Material Condition HB N/mm2 Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed # Vc Feed #
3323
1 Steel - Non-alloy, ~ 0.15 %C A 125 440 70 8 55 7 40 5 70 6 90 6 - - - - - - - -
2 cast & free cutting ~ 0.45 %C A 190 640 70 8 55 7 40 5 70 6 90 6 - - - - - - - -
3 QT 250 840 70 7 55 6 40 5 60 6 90 6 - - - - - - - -
4 ~ 0.75 %C A 270 910 70 7 55 6 40 5 60 6 90 6 - - - - - - - -
5 QT 300 1010 50 7 40 6 30 4 40 4 55 5 - - - - - - - -
6 Steel - Low alloy & cast A 180 610 70 7 55 6 40 5 60 6 90 6 - - - - - - - -
P 7 < 5% of alloying elements QT 275 930 60 7 50 6 35 4 40 5 80 5 - - - - - - - -
8 QT 300 1010 50 7 40 6 30 4 40 4 55 5 - - - - - - - -
9 QT 350 1180 40 5 30 4 30 4 30 4 45 5 - - - - - - - -
10 Steel - High alloy, cast & tool A 200 680 50 7 40 6 30 4 40 4 55 5 - - - - - - - -
11 HT 325 1100 40 5 30 4 30 4 30 4 45 5 - - - - - - - -
12 Steel - Corrosion Ferritic / Martensitic A 200 680 18 4 15 3 - - 15 3 30 4 - - - - - - - -
13 resistant & cast Martensitic QT 240 810 40 5 30 4 30 4 30 4 45 5 - - - - - - - -
14.1 Stainless Steel Austenitic AH 180 610 30 5 25 4 - - 25 4 40 5 - - - - - - - -
M 14.2 Duplex 250 840 22 3 20 2 - - 15 2 35 3 - - - - - - - -
14.3 Precipitation Hardening 250 840 18 4 15 3 - - 15 3 30 4 - - - - - - - -
15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610 60 5 50 4 50 8 60 8 80 5 - - - - - - - -
16 Pearlitic 260 880 50 4 40 3 - - 40 8 60 4 - - - - - - - -
17 Cast Iron - Nodular Ferritic 160 570 40 3 30 2 40 8 25 8 50 3 - - - - - - - -
K (GGG)
18 Pearlitic 250 840 40 3 30 2 - - 25 8 50 3 - - - - - - - -
19 Cast Iron - Malleable Ferritic 130 460 40 3 30 2 - - 25 8 50 3 - - - - - - - -
20 Pearlitic 230 780 40 3 30 2 - - 25 8 50 3 - - - - - - - -
21 Aluminum & Magnesium Non Heat Treatable 60 210 100 6 80 5 70 5 - - 180 6 110 6 150 10 250 12 250 10
22 - wrought alloy Heat Treatable AH 100 360 100 6 80 5 70 5 - - 180 6 110 6 150 10 250 12 250 10
23 Aluminum & Magnesium Non Heat Treatable 75 270 70 5 55 4 55 4 80 8 120 5 80 5 100 10 150 12 150 10
24 - cast alloy ≤12% Si Heat Treatable AH 90 320 70 5 55 4 55 4 80 8 120 5 80 5 100 10 150 12 150 10
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460 - - - - 38 6 - - 100 5 60 6 60 8 70 12 100 10
N
26 Copper & Cu alloys Free cutting, Pb > 1% 110 390 70 5 55 4 37 7 - - 40 5 55 5 60 8 70 12 100 10
27 (Brass/Bronze) Brass (CuZn, CuSnZn) 90 320 - - - - - - - - - - - - 50 8 60 12 100 10
28 Bronze (CuSn) 100 360 100 6 80 5 55 7 - - 70 6 80 6 100 10 130 12 130 10
29 Non-metallic - Thermosetting & fiber-reinforced plastics - - - - 55 4 - - - - - - - - - - - -
30 Non-metallic - Hard rubber, wood etc. - - - - - - - - - - - - - - - - - -
31 High temp. alloys Fe based A 200 680 - - - - - - - - - - - - - - - - - -
32 AH 280 950 - - - - - - - - - - - - - - - - - -
33 Ni / Co based A 250 840 - - - - - - - - - - - - - - - - - -
34 AH 350 1180 - - - - - - - - - - - - - - - - - -
35 C 320 1080 - - - - - - - - - - - - - - - - - -
S 36 Titanium & Ti alloys CP Titanium 400 MPa - - - - - - - - - - - - - - - - - -
37.1 Alpha alloys 860 MPa - - - - - - - - - - - - - - - - - -
37.2 Alpha / Beta A 960 MPa - - - - - - - - - - - - - - - - - -
37.3 alloys AH 1170 MPa - - - - - - - - - - - - - - - - - -
37.4 Beta alloys A 830 MPa - - - - - - - - - - - - - - - - - -
37.5 AH 1400 MPa - - - - - - - - - - - - - - - - - -
38.1 Hardened steel HT 45 HRC - - - - 25 3 - - - - - - - - - - - -
38.2 HT 55 HRC - - - - - - - - - - - - - - - - - -
39.1 HT 58 HRC - - - - - - - - - - - - - - - - - -
H
39.2 HT 62 HRC - - - - - - - - - - - - - - - - - -
40 Cast Iron Chilled C 400 1350 50 4 40 4 - - 40 8 60 4 - - - - - - - -
41 HT 55 HRC - - - - - - - - - - - - - - - - - -
Code Problem
1 Breaking of drill
2 Outer corner breaks down
3 Cutting edges chip
4 Drill splits up centre
5 Drill will not enter work
6 Hole rough
7 Hole oversize
8 Tang breaks
• Drill web (core) diameter too big Thin web to original size
210
Application Guide Troubleshooting - Taps
Code Problem
1 Thread is oversize
2 Axial miscutting of thread
3 Thread is undersize
4 Thread has bellmouthed entry
5 Thread surface is rough and unclean
6 Low tool life
7 Partial or complete tap breakage on FORWARD or BACKWARD movement
• Tap hole chamfer is missing or wrong Countersink tap hole chamfer with correct angle
211
Application Guide Troubleshooting - Endmills
1 2 3 4 5 6 7 8 9 10 Solution
212
Application Guide Troubleshooting - Reamers
Code Problem
1 Breakage
2 Excessive wear
3 Chattering
4 Poor surface finish
213
Technical Information Coatings & Surface Finish
Coeff. of
Coating Micro- Thermal
Trade Name Coating Friction vs Colour Application & Benefits
Structure hardness Stability
Steel
214
Technical Information Materials - Tool
Conventional high Standard tool material for most Used for the manufacturing of cutting tools such as twist drills,
speed steel common applications endmills and taps.
HSS
5% cobalt grade of High-heat resistance, especially Cobalt alloyed, tungsten-molybdenum high speed steel possessing
HSS Co high speed steel suited for roughing or when coolant high hardness, excellent cutting properties, high-red hardness and
insufficient good toughness.
8% cobalt grade of Increased heat resistance and Available for applications that require a strong resistance to softening at
high speed steel hardness, suitable for elevated cutting temperatures. The ability of the steel to maintain its “red-
HSSE Co 8% difficult-to-machine materials hot hardness” is provided by the addition of cobalt. The high hot hardness
is required for machining difficult materials such as nickel-base, titanium
and highly alloyed steel.
Premium grade of Wide range of machine taps Vanadium grade gives high wear resistance and toughness for most
HSSE high speed steel tapping applications.
Powdered Materials with hardness PM-HSS V3 for higher performance tools, incorporates very fine
metallurgy - up to 40 HRC and uniform grain structure allowing a high hardness to be achieved,
PM-HSSE V3 vanadium grade of Difficult-to-machine materials whilst maintaining good toughness.
high speed steel eg. stainless steels
Powdered Materials with hardness The addition of cobalt provides this material with the ability to maintain
metallurgy - 8% up to 45 HRC its strength and hardness level when exposed to extremely high cutting
PM-HSS Co Cobalt grade of high temperatures. This makes PM-HSS Co suitable for heavy duty tapping,
speed steel in materials such as high alloyed steels to non-ferrous metals like
Ni-base alloys & Ti-alloys.
Powdered Special applications, requiring very An excellent bridge material between high speed steel and carbide.
metallurgy - 11% high edge hardness. SPM offers very high red hardness, wear resistance and the highest
Cobalt grade of high Cutting tools with the appropriate compressive strength of any high speed steel.
SPM speed steel geometry can be applied to
workpiece materials with hardness
up to 55 HRC
Sub-micron grade of Tapping hardened steel Ultra fine grain type (0.8µm) with maximum toughness &
VHM solid Carbide high hardness, therefore especially recommended for rotating
(ISO K15-K30) tools to machine hardened parts.
Sub-micron grade of Sutton standard grade for endmills Ultra fine grain type (0.6µm) offers the ideal combination of hardness &
VHM solid Carbide & drills toughness for high performance drilling & general milling applications
(ISO K40)
Sub-micron grade of High performance grade for endmills Ultra fine grain type (0.5µm) offers the best wear resistance for high
VHM-ULTRA solid Carbide performance milling applications.
(ISO K40-K50)
215
Technical Information Conversion Tables
Metric Imperial Inch Gauge Metric Imperial Inch Gauge Metric Imperial Inch Gauge
0.010 0.0004 1.092 0.0430 57 3.800 0.1496
0.100 0.0039 1.181 0.0465 56 3.861 0.1520 24
0.150 0.0059 97 1.191 3/64 0.0469 3.900 0.1535
0.160 0.0063 96 1.321 0.0520 55 3.912 0.1540 23
0.170 0.0067 95 1.397 0.0550 54 3.969 5/32 0.1563
0.180 0.0071 94 1.500 0.0591 3.988 0.1570 22
0.190 0.0075 93 1.511 0.0595 53 4.000 0.1575
0.200 0.0079 92 1.588 1/16 0.0625 4.039 0.1590 21
0.210 0.0083 91 1.613 0.0635 52 4.089 0.1610 20
0.220 0.0087 90 1.702 0.0670 51 4.100 0.1614
0.230 0.0091 89 1.778 0.0700 50 4.200 0.1654
0.240 0.0094 88 1.854 0.0730 49 4.216 0.1660 19
0.254 0.0100 87 1.900 0.0748 4.300 0.1693
0.270 0.0106 86 1.930 0.0760 48 4.305 0.1695 18
0.280 0.0110 85 1.984 5/64 0.0781 4.366 11/64 0.1719
0.290 0.0114 84 1.994 0.0785 47 4.394 0.1730 17
0.300 0.0118 2.000 0.0787 4.400 0.1732
0.305 0.0120 83 2.057 0.0810 46 4.496 0.1770 16
0.317 0.0125 82 2.083 0.0820 45 4.500 0.1772
0.330 0.0130 81 2.184 0.0860 44 4.572 0.1800 15
0.343 0.0135 80 2.261 0.0890 43 4.600 0.1811
0.368 0.0145 79 2.375 0.0935 42 4.623 0.1820 14
0.397 1/64 0.0156 2.381 3/32 0.0938 4.700 0.1850 13
0.400 0.0157 2.438 0.0960 41 4.762 3/16 0.1875
0.406 0.0160 78 2.489 0.0980 40 4.800 0.1890 12
0.457 0.0180 77 2.500 0.0984 4.851 0.1910 11
0.500 0.0197 2.527 0.0995 39 4.900 0.1929
0.508 0.0200 76 2.578 0.1015 38 4.915 0.1935 10
0.533 0.0210 75 2.642 0.1040 37 4.978 0.1960 9
0.572 0.0225 74 2.705 0.1065 36 5.000 0.1969
0.600 0.0236 2.778 7/64 0.1094 5.055 0.1990 8
0.610 0.0240 73 2.794 0.1100 35 5.100 0.2008
0.635 0.0250 72 2.819 0.1110 34 5.105 0.2010 7
0.660 0.0260 71 2.870 0.1130 33 5.159 13/64 0.2031
0.700 0.0276 2.946 0.1160 32 5.182 0.2040 6
0.711 0.0280 70 3.000 0.1181 5.200 0.2047
0.742 0.0292 69 3.048 0.1200 31 5.220 0.2055 5
0.787 0.0310 68 3.100 0.1220 5.300 0.2087
0.794 1/32 0.0313 3.175 1/8 0.1250 5.309 0.2090 4
0.800 0.0315 3.200 0.1260 5.400 0.2126
0.813 0.0320 67 3.264 0.1285 30 5.410 0.2130 3
0.838 0.0330 66 3.300 0.1299 5.500 0.2165
0.889 0.0350 65 3.400 0.1339 5.556 7/32 0.2188
0.900 0.0354 3.454 0.1360 29 5.600 0.2205
0.914 0.0360 64 3.500 0.1378 5.613 0.2210 2
0.940 0.0370 63 3.569 0.1405 28 5.700 0.2244
0.965 0.0380 62 3.572 9/64 0.1406 5.791 0.2280 1
0.991 0.0390 61 3.600 0.1417 5.800 0.2283
1.000 0.0394 3.658 0.1440 27 5.900 0.2323
1.016 0.0400 60 3.700 0.1457 5.944 0.2340 A
1.041 0.0410 59 3.734 0.1470 26 5.953 15/64 0.2344
1.067 0.0420 58 3.797 0.1495 25 6.000 0.2362
216
Technical Information Conversion Tables
Metric Imperial Inch Gauge Metric Imperial Inch Gauge Metric Imperial Inch Gauge
6.045 0.2380 B 8.900 0.3504 15.500 0.6102
6.100 0.2402 9.000 0.3543 15.875 5/8 0.6250
6.147 0.2420 C 9.093 0.3580 T 16.000 0.6299
6.200 0.2441 9.100 0.3583 16.272 41/64 0.6406
6.248 0.2460 D 9.128 23/64 0.3594 16.500 0.6496
6.300 0.2480 9.200 0.3622 16.669 21/32 0.6563
6.350 1/4 0.2500 E 9.300 0.3661 17.000 0.6693
6.400 0.2520 9.347 0.3680 U 17.066 43/64 0.6719
6.500 0.2559 9.400 0.3701 17.462 11/16 0.6875
6.528 0.2570 F 9.500 0.3740 17.500 0.6890
6.600 0.2598 9.525 3/8 0.3750 17.859 45/64 0.7031
6.629 0.2610 G 9.576 0.3770 V 18.000 0.7087
6.700 0.2638 9.600 0.3780 18.256 23/32 0.7188
6.747 17/64 0.2656 9.700 0.3819 18.500 0.7283
6.756 0.2660 H 9.800 0.3858 18.653 47/64 0.7344
6.800 0.2677 9.804 0.3860 W 19.000 0.7480
6.900 0.2717 9.900 0.3898 19.050 3/4 0.7500
6.909 0.2720 I 9.922 25/64 0.3906 19.447 49/64 0.7656
7.000 0.2756 10.000 0.3937 19.500 0.7677
7.036 0.2770 J 10.084 0.3970 X 19.844 25/32 0.7813
7.100 0.2795 10.200 0.4016 20.000 0.7874
7.137 0.2810 K 10.262 0.4040 Y 20.241 51/64 0.7969
7.144 9/32 0.2813 10.319 13/32 0.4063 20.500 0.8071
7.200 0.2835 10.490 0.4130 Z 20.638 13/16 0.8125
7.300 0.2874 10.500 0.4134 21.000 0.8268
7.366 0.2900 L 10.716 27/64 0.4219 21.034 53/64 0.8281
7.400 0.2913 10.800 0.4252 21.431 27/32 0.8438
7.493 0.2950 M 11.000 0.4331 21.500 0.8465
7.500 0.2953 11.112 7/16 0.4375 21.828 55/64 0.8594
7.541 19/64 0.2969 11.200 0.4409 22.000 0.8661
7.600 0.2992 11.500 0.4528 22.225 7/8 0.8750
7.671 0.3020 N 11.509 29/64 0.4531 22.500 0.8858
7.700 0.3031 11.800 0.4646 22.622 57/64 0.8906
7.800 0.3071 11.906 15/32 0.4688 23.000 0.9055
7.900 0.3110 12.000 0.4724 23.019 29/32 0.9063
7.938 5/16 0.3125 12.200 0.4803 23.416 59/64 0.9219
8.000 0.3150 12.303 31/64 0.4844 23.500 0.9252
8.026 0.3160 O 12.500 0.4921 23.812 15/16 0.9375
8.100 0.3189 12.700 1/2 0.5000 24.000 0.9449
8.200 0.3228 12.800 0.5039 24.209 61/64 0.9531
8.204 0.3230 P 13.000 0.5118 24.500 0.9646
8.300 0.3268 13.097 33/64 0.5156 24.606 31/32 0.9688
8.334 21/64 0.3281 13.494 17/32 0.5313 25.000 0.9843
8.400 0.3307 13.500 0.5315 25.003 63/64 0.9844
8.433 0.3320 Q 13.891 35/64 0.5469 25.400 1 1.0000
8.500 0.3346 14.000 0.5512
8.600 0.3386 14.288 9/16 0.5625
8.611 0.3390 R 14.500 0.5709
8.700 0.3425 14.684 37/64 0.5781
8.731 11/32 0.3438 15.000 0.5906
8.800 0.3465 15.081 19/32 0.5938
8.839 0.3480 S 15.478 39/64 0.6094
217
Technical Information Useful Tables
Conversion of values depends on the actual alloy content; this chart therefore indicates a general conversion only.
Manufacturing Tolerances
Nominal Tolerance Grade in Microns 1 Micron = 0.001mm
Diameter up to and
in mm including e8 h5 h6 h7 h8 h9 h10 js12 js14 k8 k9 k10 m7
above
-14 0 0 0 0 0 0 +50 +125 +14 +25 +40 +12
0 3
-18 -4 -6 -10 -14 -25 -40 -50 -125 0 0 0 +2
-20 0 0 0 0 0 0 +60 +150 +18 +30 +48 +16
3 6
-38 -5 -8 -12 -18 -30 -48 -60 -150 0 0 0 +4
-25 0 0 0 0 0 0 +75 +180 +22 +36 +58 +21
6 10
-47 -6 -9 -15 -22 -36 -58 -75 -180 0 0 0 +6
-32 0 0 0 0 0 0 +90 +215 +27 +43 +70 +25
10 18
-59 -8 -11 -18 -27 -43 -70 -90 -215 0 0 0 +7
-40 0 0 0 0 0 0 +105 +260 +33 +52 +84 +29
18 30
-73 -9 -13 -21 -33 -52 -84 -105 -260 0 0 0 +8
-50 0 0 0 0 0 0 +125 +310 +39 +62 +100 +34
30 50
-89 -11 -16 -25 -39 -62 -100 -125 -310 0 0 0 +9
-60 0 0 0 0 0 0 +150 +370 +46 +74 +120 +41
50 80
-106 -13 -19 -30 -46 -74 -120 -150 -370 0 0 0 +11
-72 0 0 0 0 0 0 +175 +435 +54 +87 +140 +48
80 120
-126 -15 -22 -35 -54 -87 -140 -175 -435 0 0 0 +13
218
Technical Information Shank Designs - HSS Tools
5 28 25 56
6 36 32 60
chamfer
8 36 40 70
10 40 50 80
12 45 63 90
8 5.5 18 6.6 36 -
10 7 20 8.4 40 - chamfer
12 8 22.5 10.4 45 -
16 10 24 14.2 48 -
20 11 25 18.2 50 -
centre hole
25 12 32 23 56 17
32 14 36 30 60 19
40 14 40 38 70 19
50 18 45 47.8 80 23
63 18 50 60.8 90 23 chamfer
10 40 10 9.9
12 45 10 11.9
16 48 10 15.9
20 50 15 19.9
219
Technical Information Shank Designs - Carbide Tools
3 28 14 45
4 28 16 48
5 28 18 48 chamfer
6 36 20 50
8 36 25 56
10 40 32 60
8 5.5 18 6.9 36 -
10 7 20 8.5 40 - chamfer
12 8 22.5 10.4 45 -
14 8 22.5 12.7 45 -
16 10 24 14.2 48 -
1.27 / 20TPI
18 10 24 16.2 48 -
1.27 / 20TPI
20 11 25 18.2 50 -
25 12 32 23 56 17
32 14 36 30 60 19 chamfer
10 7.1 - 8.5 - 40 28 20
h2
18 10.8 - 16.2 - 48 36 24
20 11.4 - 18.2 - 50 38 25
Other dimensions
(h3)
220
Technical Information Drill Terminology
Drill Definitions
fluted land
drill
diameter
*Drills manufactured to ANSI B94-11. The overall length and flute length are measured to the corner of the outer lip.
Type D Type E
point ground for cast iron brad point
† The Drill diameter usually reduces towards the shank end; tolerance per 10mm of flute length.
221
Technical Information Hints on Use & Maintenance
Web Thinning
On most drills the web increases in thickness towards the shank with the result that, as the drill is shortened by repeated sharpening, the chisel edge will
become wider. As the chisel edge does not cut but forces the metal out of the way, too wide a chisel edge will result in more pressure required for penetration,
leading to greater heat generation and a resultant loss of life.
hold
HOLDoriginal
ORIGINAL
A thickness
THICKNESS
Cutting Fluids
The use of cutting fluids is an advantage in most drilling operations and an essential in some. The two main functions of the cutting fluid are lubrication
and cooling. The purpose of lubrication is to reduce friction by lubricating the surfaces tool and work, to facilitate easier sliding of the chips up the flute
and to prevent the chips welding to the cutting edges. In production work, particularly when drilling deep holes, the cooling action of the fluid is often
more important than the lubrication. Overheating will shorten the life of the drill. Intermittent feed on deep holes, where possible, not only clears the
chips but permits more effective cooling.
Speeds
The speed of a drill is the rate at which the periphery of the drill moves in relation to the work being drilled. As a rule, with a drill working within its speed range for a
specific material, more holes between sharpening will be achieved if the speed is reduced and less holes if the speed is increased. Thus, for each production run, a speed
must be established which will result in the highest rate of production without excessive breakdown time or drill usage. The factors governing speed are: component
material, hardness of material, depth of hole, quality required, condition of drilling machine, efficiency of cutting fluid.
Feeds
The feed of the drill is governed by the drill size and the component material. As with speeds, an increase in feed will lessen the number of holes produced
sharpening but it is essential that a constant feed be maintained. If a drill is allowed to dwell, breakdown of the cutting edges will result.
222
Technical Information Tap Terminology
overall length
Tap Definitions
length of shank threaded length
length of chamfer
square pitch lead length
lead angle
square size
crest
semi-angle of thread
width of land
shear angle
cutting face
web diameter
Gun nose (spiral point)
flute
concentric land
tangential hook
223
Technical Information Taps
Reduced
Style 1 Shank Taps DIN374 / DIN376 /Style
DIN5156
2 Style 3
l3 Style 1
d2 d2 d2
d2
Machine
l 2
Nut Taps ANSI sqB949 Standard l 2
sq ll22 sq
sq
l1 l1 ll11
l2 l2
sq l2l2 sq l2 sq
sq sq
l1 l1
l1l1
Tap Styles
l1
l2l2 sq l2 l2
l2 sq sq
sq sq l2 sq
l1l1 l1 l1
l1 l1
Style24
Style Style 5 Style 6
Style 3 l3 Style 4
l3 d2 3 Lobe 4 Lob
dd2 2 d d2
2 d2
l2 l2 ll2
l2 sq sq sq
sq l2 sq 2
sq
l1 l1 ll11
l1 l1
Style 5 Style 6
Chamfer
Style 3
Type / Length
l3
dd2 2
Style 4
d2
d2
3 Lobe
Style 5
4 Lobel 3
d2
Table below is in accordance with ISO8830 / DIN2197
l2 sq l2l2 sq
l2 Number
sq of Chamfer sq
Main area of
l2 sq
Terminology l1
l1 Form threads angle (≈) Type
ll of flute
1
lIllustration
application
1
1
on lead
Style 6
Style 4 Style 5 Style 6
TAPER d2
d2
A 6 to 8 5° l3 Hand or
d2
Short through holes d2
straight
flutes
l2l2 sq l2 l2
sq sq sq
l1l1
INTERMEDIATE D 3.5 to 5 8° l1 Hand or Generally for l1
straight through holes
Style 5 Style 6
l3
d2 d2
BOTTOMING E* 1.5 to 2 23° Hand or Blind holes with very
straight short thread run out
l2 l2
sq flutes sq
l1 l1
BOTTOMING
l2 C sq
2 to 3 15° Spiral Generally for
l1
fluted blind holes
224
Technical Information Taps
Description Illustration
1 Straight Flutes (Hand) - Suitable for through or blind holes. The flutes only have room for a small
amount of chips. The chips are not transported axially. Therefore, it is not advisable to cut deep through or
blind holes (except in short chipping materials), with this type.
D
2 Straight Flutes with (Gun) – Suitable for through holes, the gun point curls the chip forward ahead of the
tap & out of the hole. Therefore, chip clogging is avoided and coolant can flow without problems. < 1.5xD
3 Spiral Flutes (LH Spiral, right hand cutting) – Suitable for interrupted through holes, where cross-holes
exist. The direction of the flutes, curls & transports the chips forward of the tap, similar to Gun taps (also,
opposite to RH spiral flutes). However, in applications where another hole intersects with the tapped hole,
the helical flutes maintain the pitching of the thread.
D
4 15° Spiral Flutes (RH Spiral) – Suitable for blind holes, best suited to tough short chipping materials, up to
1.5 x D in depth. This particular tap design has no advantages for soft, and long chipping materials, especially
D
over 1.5 x d1 in depth. Due to the slow helix angle not transporting the chips well, clogging is possible.
> 1.5xD
5 40° to 50° Spiral Flutes (RH Spiral) – Suitable for blind holes, best suited to long chipping materials, < 1.5xD
the high helix angle & the direction of the flutes, curls & transports the chips back out of the hole.
This particular tap style is required to cut on reversal; therefore flute rake is required on the both front
& back flute faces. D
D
6 Thredflo/Roll taps (fluteless) - Suitable for blind & through holes. This type of tap internally rolls a
thread, therefore displacing the metal rather than cutting, like the above mentioned styles. Due to torque
generated when producing roll threads, much higher machine power is required. Roll threads alsoD produce D
much stronger threads than cut threads, as the grain structure of the thread remains uniform through the
thread form profile. Note! Tapping drill size is not the same as a cut thread tap.
D
The above basic tool types are available in different variations, which have been designed & developed in
respect to the specific materials and working conditions. > 1.5xD
< 1.5xD
Through Holes D
D
D
1 2 4 5 6 2 4 D
3 1 2 4 5 6
D D D
up to1xD
Upto 1xD
< 1.5xD (e.g. nutter)
(eg. nut)
> 1.5xD
Blind HolesD
4 5 6 D
4 5 D6 D 4 5 6DD 4 5 6D
D
For blind holes, there are generally two thread run out forms used at the a) The bore is smaller than the tap hole diameter (typical for pipes)
bottom of the tap hole. One form has a recessed diameter at the bottom of b) As step hole, where the following diameter (second step), is
D
the hole, and the other form has a standard run out. Other types of holes are smaller than the tap hole diameter.
respective to construction
D designs, eg. D
Upto 1xD
D
(eg. nut)
225
thread exits one-sided
Technical Information Tap Geometry
Geometry
Sutton
Description Tap geometry Surface
Designation
GG For cast iron – iron is a very abrasive material, therefore to increase tool life the taps Straight flutes with TiCN
are always surface treated or coated to resist the abrasion. The thread limit for this low rake angle Plasma Nitride Ni
range is 6HX, which is high limit of the 6H tolerance allowing for longer wear life.
N For normal, general purpose type materials – suited to a wide range of materials, Normal rake angle Bright
with normal rakes & relief’s. This is existing geometry that Sutton Tools has & normal thread relief Blu
historically manufactured. TiN
UNI For normal, general purpose type materials – suited to a wide range of materials, with Normal rake angle Bright
normal rakes & high relief’s. However tap material is powder metal high speed steel & high thread relief TiAlN
(PM-HSS), which due to its finer grain structure than that of conventional HSS, higher
hardness can be achieved with excellent toughness, along with TiAlN surface coating
allowing for better tool life than normal taps.
VA For stainless and tough steels – to avoid clogging in tough, long chipping materials High rake angle TiCN
such as stainless steel, it is essential that the chip flows continuously in an axial & thread relief Blu
direction. Best suited to rigid tapping applications due to high thread relief. TiCN & TiN
coating has proven to be best suited for these materials.
VAPM For stainless and tough steels – geometry similar to VA range, however tap material High rake angle TiCN
is powder metal high speed steel (PM-HSS), which due to its finer grain structure than & thread relief
that of conventional HSS, higher hardness can be achieved with excellent toughness,
allowing for better tool life than VA taps.
H For hard materials forming short chips – the low rakes & relief’s combined with a hard Low rake angle TiCN
surface coating, allow excellent tool life. & thread relief
W For soft materials – due to the very high rake angle with a low thread relief, allows for High rake angle Bright
excellent chip flow & gauging in soft materials. & low thread relief CrN
AI For malleable aluminium with long chips – to avoid clogging when threading in aluminium High rake angle, Bright
which forms long chips, it is essential that the chip flows continuously in an axial direction. high helix, 2 flutes, Plasma Nitride
Generally these taps have 1 less flute than normal taps & therefore have larger flute low thread relief
space, which more adequate for large volumes of chips to help avoid clogging.
226
Technical Information Tapping Information
Lubricants
Use:
Use of a suitable lubricant or cutting compound is necessary on most tapping operations. The type of lubricant as well as the method of application is
often of extreme importance and can be responsible for the success or failure of a tapping operation.
Recommendation:
Better results can sometimes be obtained by the use of one of the many modified or specialised lubricants recommended by cutting oil specialists.
The general principle is to have more EP (Extreme Pressure) additives added with the degree of difficulty, usually hardness increase. Oils stick, and
improve frictional properties essential in tapping tough applications.
Application:
Proper application of the lubricant is just as important as the type used. To be effective, ample quantities of lubricant must reach the chamfer or cutting
portion of the tap during the entire tapping operation. In many cases, the lubricant must also aid in controlling or disposing of the chips.
Flow:
The flow of lubricant should be directed into the hole rather than at the tap and should have sufficient pressure to wash the chips away from the hole as
much as possible. Also, if the flow is not continuous, it should start before the tap enters the hole and continue until the tap is completely reversed out
of the hole. In this way, ample oil is provided at the start of the cut and loose chips will be suspended in the oil so that they do not interfere with the tap
backing out of the hole. On machines where the work revolves and the tap is stationary, it is desirable to use several streams of lubricant on opposite
sides of the tap, especially on horizontal tapping.
Cleanliness:
Tapping lubricants must always be clean. If filter equipment is not used, the lubricant must be replaced periodically to eliminate fine chips, grit and foreign
matter that accumulate in the tank. Also, it is very important that the piping and tank are thoroughly flushed and cleaned before filling with new lubricant.
The dilution of lubricants often changes during use so that additions may be necessary to maintain the recommended proportion of active materials.
Tapping drill
The tapping drill hole diameter should be drilled as large as possible, within the respective fitting just under the upper permissible dimension of the tolerance.
If the tapping drill hole diameter is too small, then this will cause the thread root diameter (minor diameter) to cut the material. This should be avoided,
because the small chips which derive from the root of thread, clog the normal chip flow and rip pieces of material out of the finished thread. Consequently,
the tap is overloaded and often breaks because of the high torque.
Another problem which occurs in certain materials due to thread root diameter cutting, is when a chip-bulge has been formed around the root radius.
The minor diameter of the tap is clogged with small chips, which leads to a clamping of the tool teeth are ripped out, which leads to tool breakage. It
is therefore, necessary that the material which is to be tapped, be taken into account when determining the tap hole diameter. Typical materials which
do not squeeze or clamp are iron, brass and bronze and materials which squeeze are steels, steel castings and malleable steels. The tap cuts more
economically, when the tap drill hole diameter is within the upper range of the permissible tolerance.
Warning: When drilling holes in materials which tend to work harden, care is needed to ensure the drills are sharp otherwise tap life is decreased.
Metric (ISO) Drill Size = Nom, Tap Dia, in mm – Pitch M6 × 1 = 5.00mm drill
1.28 75
Whitworth Form Threads 1.28
Drill Size = Nom, Tap Dia, – ––– × % of thread depth
Drill Size = 0.250 – ––– × ––– = 0.250 – 0.048
20 100
(inch calculation)
TPI
Therefore Drill Size = 0.202
Nearest Standard Drill = 5.1mm = 0.2007 inch
227
Technical Information Tapping Drill Size Chart
All sizes are “suggested sizes” only and may be varied to suit individual requirements
M UNC BSW
ISO Metric Coarse (60°) Unified National Coarse (60°) British Standard Whitworth (55°)
Tap Pitch Tapping Drill Tap Tapping Drill Tap Tapping Drill
T.P.I. T.P.I.
Size mm mm Size mm Size mm
M1.6 0.35 1.25 #2 (0.086) 56 1.85 1/16* 60 1.2
M2 0.4 1.6 #3 (0.099) 48 2.1 3/32* 48 1.85
M2.5 0.45 2.05 #4 (0.112) 40 2.3 1/8 40 2.55
M3 0.5 2.5 #5 (0.125) 40 2.6 5/32* 32 3.2
M3.5 0.6 2.9 #6 (0.138) 32 2.8 3/16 24 3.7
M4 0.7 3.3 #8 (0.164) 32 3.4
7/32* 24 4.5
M4.5 0.75 3.7 #10 (0.190) 24 3.8
M5 0.8 4.2 #12 (0.216) 24 4.5 1/4 20 5.1
M6 1.0 5.0 1/4 20 5.1 5/16 18 6.5
M8 1.25 6.8 5/16 18 6.6 3/8 16 7.9
M10 1.5 8.5 3/8 16 8.0 7/16 14 9.3
M12 1.75 10.2 7/16 14 9.4 1/2 12 10.5
M14 2.0 12.0 1/2 13 10.8 9/16 12 12.1
M16 2.0 14.0 9/16 12 12.2 5/8 11 13.5
M18 2.5 15.5 5/8 11 13.5 3/4 10 16.25
M20 2.5 17.5 3/4 10 16.5 7/8 9 19.25
M22 2.5 19.5 7/8 9 19.5
1 8 22.0
M24 3.0 21.0 1 8 22.2
1-1/8 7 24.75
M27 3.0 24.0 1-1/8 7 25.0
M30 3.5 26.5 1-1/4 7 28.0 1-1/4 7 28.0
M33 3.5 29.5 1-3/8 6 31.0 1-1/2 6 33.5
M36 4.0 32.0 1-1/2 6 34.0 1-3/4 5 39.0
M42 4.5 37.5 1-3/4 5 39.5 2 4-1/2 44.5
M45 4.5 40.5 2 4.5 45.0 *WHIT. Form
M48 5.0 43.0
M52 5.0 47.0 UNF
M56 5.5 50.5 Unified National Fine (60°) BSF
MF Tap
T.P.I.
Tapping Drill British Standard Fine (55°)
ISO Metric Fine (60°) Size mm
Tap Tapping Drill
#3 (0.099) 56 2.1 T.P.I.
Tap Pitch Tapping Drill #4 (0.112) 48 2.35
Size mm
Size mm mm #5 (0.125) 44 2.65 3/16 32 4.0
M4 0.5 3.5 #6 (0.138) 40 2.9 7/32 28 4.6
M5 0.5 4.5 #8 (0.164) 36 3.5 1/4 26 5.3
M6 0.75 5.3 5/16 22 6.8
#10 (0.190) 32 4.1
M8 1.0 7.0 3/8 20 8.3
M10** 1.0 9.0 #12 (0.216) 28 4.6
3/16* 32 4.0 7/16 18 9.8
M10 1.25 8.8 1/2 16 11.0
M12** 1.25 10.8 1/4 28 5.5
5/16 24 6.9 9/16 16 12.7
M12 1.5 10.5
M14** 1.25 12.8 3/8 24 8.5 5/8 14 14.0
M14 1.5 12.5 7/16 20 9.8 11/16 14 15.5
M16* 1.5 14.5 1/2 20 11.5 3/4 12 16.75
M18** 1.5 16.5 9/16 18 12.8 7/8 11 19.75
M20* 1.5 18.5 5/8 18 14.5 1 10 22.75
M22 1.5 20.5 1-1/8 9 25.5
3/4 16 17.5
M24 2.0 22.0 1-1/4 9 28.5
7/8 14 20.5
M25* 1.5 23.5 1-1/2 8 34.5
M32* 1.5 30.5 1 12 23.5
1-3/4 7 41.0
M40* 1.5 38.5 1* 14 24.0
M50* 1.5 48.5 1-1/8 12 26.5
1-1/4 12 29.5
*Metric Conduit **Spark Plug
1-3/8 12 33.01
BSB
1-1/2 12 36.0 British Standard Brass (55°)
8UN (8 TPI)
Tap Tapping Drill
Unified National Form (60°) *UNS T.P.I.
Size mm
Tap
T.P.I.
Tapping Drill UNEF 1/4 26 5.2
Size mm Unified National Form (60°) 5/16 26 6.8
1-1/8 8 25.5 3/8 26 8.4
Tap Tapping Drill
1-1/4 8 28.5 T.P.I. 7/16 26 10.0
1-3/8 8 31.75 Size mm
1/2 26 11.6
1-1/2 8 35.0 1/4 32 5.6
9/16 26 13.2
1-5/8 8 38.0 5/16 32 7.2
1-3/4 8 41.5 5/8 26 14.8
3/8 32 8.8
1-7/8 8 44.5 3/4 26 18.0
1/2 28 11.8
2 8 47.5 7/8 26 20.8
5/8 24 14.75
1 26 24.3
3/4 20 18
1 20 24.2
228
Rc (BSPT)* Thread forming Thread forming
ISO Rc Taper Series 1:16 (55°) (Fluteless taps) (Fluteless taps)
Tap Drill Drill & Tap Tapping Drill Tap Tapping Drill
T.P.I. T.P.I. T.P.I.
Size Only* Reamer Size mm Size mm
Rc 1/16 28 6.4 6.2 Metric coarse UNC
Rc 1/8 28 8.4 8.4 M1 0.25 0.9 #1 (0.073) 64 1.7
Rc 1/4 19 11.2 10.8 M1.1 0.25 1.0 #2 (0.086) 56 2.0
Rc 3/8 19 14.75 14.5 #3 (0.099) 48 2.3
M1.2 0.25 1.1
Rc 1/2 14 18.25 18.0 #4 (0.112) 40 2.6
M1.4 0.3 1.28
Rc 3/4 14 23.75 23.0 #5 (0.125) 40 2.9
M1.6 0.35 1.45
Rc 1 11 30.0 29.0 #6 (0.138) 32 3.2
M1.7 0.35 1.55 #8 (0.164) 32 3.8
Rc 1-1/4 11 38.5 38.0
Rc 1-1/2 11 44.5 44.0 M1.8 0.35 1.65 #10 (0.190) 24 4.4
Rc 2 11 56.0 55.0 M2.0 0.40 1.8 #12 (0.216) 24 5.0
M2.2 0.45 2.0 1/4 20 5.8
M2.3 0.4 2.1 5/16 18 7.3
G (BSPF) M2.5 0.45 2.3 3/8 16 8.8
ISO G Parallel Series (55°) 7/16 14 10.2
M2.6 0.45 2.4
1/2 13 11.7
Tap Tapping Drill M3 0.5 2.8
T.P.I. UNF
Size mm M3.5 0.6 3.2
G 1/16 28 6.8 #1 (0.073) 72 1.7
M4 0.7 3.7
#2 (0.086) 64 2.0
G 1/8 28 8.8 M5 0.8 4.6 #3 (0.099) 56 2.3
G 1/4 19 11.8 M6 1.0 5.5 #4 (0.112) 48 2.6
G 3/8 19 15.3
M8 1.25 7.4 #5 (0.125) 44 2.9
G 1/2 14 19.0
M10 1.5 9.3 #6 (0.138) 40 3.2
G 5/8 14 21.0
M12 1.75 11.2 #8 (0.164) 36 3.9
G 3/4 14 24.5
G 7/8 14 28.5 BSW #10 (0.190) 32 4.5
#12 (0.216) 28 5.1
G1 11 31.0 1/8 40 2.9
1/4 28 6.0
G 1-1/4 11 39.5 5/32 32 3.6
5/16 24 7.5
G 1-1/2 11 45.5 3/16 24 4.3 3/8 24 9.0
G 1-3/4 11 51.5 1/4 20 5.8 7/16 20 10.6
G2 11 57.5 5/16 18 7.3 1/2 20 12.1
G 2-1/2 11 72.5 3/8 16 8.8 G (BSPF)
1/8 28 9.25
1/4 19 12.5
Rp (BSPPL) NPT-NPTF* 3/8 19 16.0
Sealing pipe thread parallel (55°) National Pipe Taper 1:16 (60°) 1/2 14 20.0
Tap Tapping Drill Tap Drill Drill & 5/8 14 22.0
T.P.I. T.P.I.
Size mm Size Only* Reamer 3/4 14 25.5
7/8 14 29.25
Rp 1/8 28 8.6 1/16 27 6.3 6.0
1 11 32.0
Rp 1/4 19 11.5 1/8 27 8.5 8.2
Rp 3/8 19 15.0 1/4 18 11.0 10.8
Rp 1/2 14 18.5 3/8 18 14.5 14.0 BA
Rp 3/4 14 24.0
1/2 14 18.0 17.5
(47.5°)
Rp 1 11 30.2
3/4 14 23.0 23.0 Tap Pitch Tapping Drill
Rp 1-1/4 11 39.0
1 11-1/2 29.0 28.5 Size mm mm
Rp 1-1/2 11 45.0
1-1/4 11-1/2 37.5 37.0 0 1 5.1
Rp 2 11 56.4
1-1/2 11-1/2 44 43.5 1 0.9 4.5
2 11-1/2 55.5 55.0 2 0.81 4.0
Pg 3 0.73 3.4
Steel conduit (80°) 4 0.66 3.0
NPSF 5 0.59 2.65
Tap Tapping Drill National Pipe Straight (60°)
T.P.I. 6 0.53 2.3
Size mm
7 0.48 2.05
Tap Tapping Drill
Pg7 20 11.3 T.P.I. 8 0.43 1.8
Size mm
Pg9 18 13.9 9 0.39 1.55
Pg11 18 17.3 1/8 27 8.6 10 0.35 1.4
Pg13.5 18 19.1 1/4 18 11.3 11 0.31 1.2
Pg16 18 21.2 3/8 18 14.5 12 0.28 1.05
Pg21 15 26.8 1/2 14 18.0 13 0.25 0.98
14 0.23 0.8
*Taper pipe threads of improved quality are
obtained when taper is pre-formed using 15 0.21 0.7
Sutton Tools Taper Pipe Reamers. 16 0.19 0.6
229
Technical Information Fluteless Taps
Fluteless taps
Fluteless taps do not cut threads in the same manner as conventional taps – but actually FORM and FLOW the threads with an absence of chips. Used
under suitable conditions, these taps produce threads with a high degree of finish not possible with ordinary taps. Ductile materials are most appropriate
for forming of threads and must have a minimum 10% elongation.
Formed Cut
Thread Thread
R1 R2
Figure 3.
Figure 6. Figure 7.
R1 R2
It is to be noted that the drill size for fluteless tapping is always larger than the P.D. of the thread. A drill size equal to the P.D. of the thread
would produce 100% of thread, but this is NOT recommended.
As the additional driving torque is only up to 50% increase, any conventional driving equipment using the square as a drive is suitable for fluteless tapping.
Lubrication Countersinking
In general it is best to use a good cutting oil or lubricant rather than a Because the fluteless tap displaces metal, some metal will be displaced
coolant for fluteless tapping. Sulphur base and mineral oils, along with above the mouth of the hole during tapping, countersink or chamfer the
most friction reducing lubricants recommended for use in cold extrusion or hole prior to tapping will reduce the extrusion within the countersink and
metal drawing, have proven best for this work. Make sure lubricant is clean, not interfere with the mating part.
free from chips swarf and filings in suspension, which produce a poor finish
and jamming, sometimes breakage – extra filtration may be required.
230
Technical Information Tapping Drill Size Chart (Fluteless)
1/8 40 2.90
#6 32 3.10
5/32 32 3.60
M4 0.7 3.70
#8 32 3.80
3/16 24 4.30
#10 24 4.30
M5 0.8 4.60
M6 1.0 5.55
M8 1.25 7.40
231
Technical Information Thread Forms Components & Tap Limits
Thread Systems
The ISO standard is the international standard intended to be adopted throughout the world to unify and rationalise screw threads at an international level.
The ISO standard recognises two groups of screw threads, (a) ISO metric, a complete thread system in metric units and (b) ISO inch Unified which is covered
by British Standard BS 1580 and American Standard ANSI – B1-1 – Unified screw thread systems. The Whitworth and BA screw threads are obsolete but
still widely used during the period of transition.
All measurements must have a controlling point or base from which to start. In the case of a screw thread, this control point is called BASIC or theoretically
correct size, which is calculated on the basis of a full thread form. Thus, on a given screw thread, we have the Basic Major Diameter, the Basic Pitch Diameter,
and the Basic Minor Diameter. The Basic Profile is the profile to which the deviations, which define the limits of the external and internal threads, are applied.
While it is impossible in practice to form screw threads to their precise theoretical or BASIC sizes, it is possible and practical to establish limits to which the
deviation must not exceed. These are called the “Maximum” and “Minimum” Limits. If the product is no smaller than the “Minimum Limit” and no larger
than the “Maximum Limit”, then it is within the size limits required. This difference between the Maximum and Minimum Limits is the TOLERANCE.
In actual practice, the Basic size is not necessarily between Maximum and Minimum Limits. In most cases, the Basic Size is one of the Limits.
In general, tolerances for internal threads will be above Basic and for external threads, below Basic.
Figure 1 Figure 2
PP
major PP
—
— nut
dia. 88 8G
8G
8H
8H
H
—
—H 7G
7G fundamental
88 7H
7H 6G
6G
6H
6H deviation
pitch 5G
5G
5H
5H
dia. 33 4H
4H
30
30 —
—HH
88 basic pitch
60
60 55 diameter
—
—HH
88 HH
PP 3h
3h 4h
4h
—
— 5h
5h
22 bolt 6h
6h 5g 6g
5g 6g
H
—
—H 7h
7h 6e
6e
minor 44 7g
7g 7e
7e
dia. 8g
8g
9g
9g fundamental
90
90 PP
—
— deviation
44
axis of screw thread
HH == 0,86603P
0,86603P 33 HH == 0,32476P
—
— 0,32476P
88
H
—
—H == 0,21651P
0,21651P
44 55 HH == 0,54127P
—
— 0,54127P
HH == 0,10825P 88
—
— 0,10825P
88
232
Technical Information Thread Limits
Metric Taps; Comparison Tap Limits & Product Classes and Grades
P limits; they stock the smaller P limit for SP Taps, and the larger P limit for PO taps.
Where there is only the one “P” limit; it is the same limit for both SP & PO Taps
233
Technical Information ISO Metric Tap Class & Tolerance
The ISO metric system of tap tolerances comprises three classes of tap sizes which are calculated from the Grade 5 nut tolerance, irrespective of the nut grade to
be cut as follows:
Figure 3
nut limits
8H
7H
6H
5H
ISO tap classes
4H
Class 3
t
Class 2 0.7 t
Class 1 0.5 t
pitch diameter of basic profile 0.3 t
0.1 t
234
Technical Information Unified Screw Thread Tolerancing System
This system is well known. It has now been accepted by ISO as the recommended tolerance for ISO inch threads down to 0.06 inch nominal diameter.
The arrangement of the allowance and the various classes of pitch diameter tolerance for a normal length of engagement of the mating threads is shown
in this diagram.
The pitch diameter tolerance for Class 2A bolts is shown as 100 units, and the fundamental deviation and other tolerances are shown as percentages of
the Class 2A tolerance. Figure 4.
Figure 4
class 1B
nut
class 2B
class 3B
195
97.5 130
basic pitch diameter
75
30 100
class 3A 30 150
class 2A
bolt
class 1A
Unified Taps
The “GH” System
This system provides for a range of pitch diameters for each size of tap: the height limit of pitch diameters being the basic pitch diameter plus increments
or units of .0005". It is designated by the letter “GH” followed by a numeral indicating the number or units applying to the particular “GH” size. The tap
manufacturer’s tolerance is applied as minus.
This is the limit which will normally be supplied. Alternative “GH” limits other than those shown in the price list can be made to special order.
For Sutton Tools Metric (mm) Roll / Fluteless Taps (Limit same as the “RH” & “G” Limits) GH LIMITS
GH Limits: Steps of 0.0127 mm Upper limit: 0.0005" x N
N = GH number Lower limit: (0.0005" x N) – 0.0005
235
Technical Information British Standard Threads
Basic Profile for Whitworth (BSW, BSF and WHIT.) Thread forms
Figure 5
H h
27.5º
r
55º
H
—
6
Pitch P
H = 0.96049P H = 0.160082P
—
Fig 5 6
2 H = 0.640327P
h =— r = 0.137329P
3
150 150
basic pitch 100
Pitch diameter tolerance zones of recommended combinations of classes of bolts and nuts having Whitworth screw threads. Figure 6.
Figure 7
British Tap Size Zone Limits
British Standard Zone 3 and Zone 4 limits are normally applied to
Whitworth and BA taps.
The values for position and tolerances are formulated and must be Zone
obtained from the standard’s tables. 4
The accompanying chart shows the zone limits relationship for ground
threads. Figure 7.
Zone
3
Zone
2
Zone
1
basic
pitch diameter
236
Technical Information ISO Pipe Tap Thread Systems
The International Standard Pipe Tap Thread System (ISO) has been derived from the original Whitworth gas and water pipe tap threads, formerly
known as BSPF (Fastening) and BSPT (Taper), these systems have been so widely used throughout Europe and the United Kingdom that they have been
metricated, whilst still retaining the Whitworth thread form. These popular thread systems are the basis for the ISO parallel “G” series and the taper “R”
series, these systems are endorsed and in agreement with the current British and Australian standards. For comparison, the pitch diameter tolerance
zones are given for both the parallel and taper systems.
“G” Fastening Parallel Pipe Threads – ISO 228, AS1722 PT2 and BS2779.
This parallel thread system has only one positive internal thread tolerance and two classes of external tolerances. This series constitutes a fine series of
fastening connecting pipe threads for general engineering purposes, the assembly tolerances on these threads are such as to make them unsuitable for
pressure tight seal by the threads themselves. For the conveying of fluids, the seal may be produced by gaskets, flanges, or “O” rings.
INTERNAL
THREAD
internal thread G
GA GB
MAXIMUM
INTERNAL
taper parallel PITCH
TAPER PARALLEL DIAMETER
BASIC PITCH
DIAMETER MINIMUM INTERNAL
(at gauge plane) RC R RP
PITCH DIAMETER
maximum
MAXIMUM
internal
INTERNAL
pitch
PITCH
diameter
DIAMETER
basic pitch
BASIC PITCH
diameter
DIAMETER minimum internal
MINIMUM INTERNAL
(at gauge
(at gauge plane)
plane) pitch diameter
PITCH DIAMETER
237
Technical Information Endmill Terminology
Endmill Definitions
overall length
cutting length
end teeth
For shank styles refer page 219 relief angle
shank
diameter cutting diameter
rake
peripheral
relief angle
flute
core
raised
land width Conventional milling. Point A become work hardened
material to be
removed by the
cutting depth next tooth
(feed per tooth)
Conventional milling versus climb milling
A milling cutter can cut in two directions, sometimes known as climb or conventional.
material A
A
feed
Conventional milling: The depth of the cut starts at zero thickness, and increases up to
the maximum. The cut is so light at the beginning that the tool does not cut, but slides
across the surface of the material, until sufficient pressure is built up and the tooth
suddenly bites and begins to cut. This deforms the material (at point A on the diagram,
left), work hardening it, and dulling the tool. The sliding and biting behaviour leaves a
poor finish on the material.
cutting depth
(feed per tooth)
Climb milling: Each tooth engages the material at a definite point, and the width of the
cut starts at the maximum and decreases to zero. The chips are disposed behind the material
cutter, leading to easier swarf removal. The tooth does not rub on the material, and so feed
cutter
tool life may be longer. However, climb milling can apply larger loads to the machine, and
rotation
so is not recommended for older milling machines, or machines which are not in good
condition. This type of milling is used predominantly on mills with a backlash eliminator.
238
Technical Information Endmills - Types
N Finishing Form
239
Technical Information Reamers
Hints on use
Feeds The following charts gives recommended surface meter per minute
values which may be used as a basis from which to start.
In reaming, feeds are usually much higher than those used for drilling.
m/min
The amount per feed may vary with the material, but a good starting
Aluminium and its alloys���������������������������������������������������������������������������������� 20 – 35
point would be between 0.038mm and 0.10mm per flute per revolution.
Brass and Bronze, ordinary����������������������������������������������������������������������������� 20 – 35
Too low a feed may result in glazing, excessive wear, and occasionally
Bronze, high tensile��������������������������������������������������������������������������������������������� 18 – 22
chatter. Too high a feed tends to reduce the accuracy of the hole and
Monel Metal�������������������������������������������������������������������������������������������������������������� 8 – 12
may lower the quality of the finish. The basic idea is to use as high a
Cast Iron, soft�������������������������������������������������������������������������������������������������������� 22 – 35
feed as possible and still produce the required accuracy and finish.
Cast iron, hard������������������������������������������������������������������������������������������������������� 18 – 22
Stock to be removed Cast Iron, chilled������������������������������������������������������������������������������������������������������ 7 – 10
Malleable Iron�������������������������������������������������������������������������������������������������������� 18 – 20
For the same reason, insufficient stock for reaming may result in a Steel, Annealed������������������������������������������������������������������������������������������������������13 – 18
burnishing rather than a cutting action. It is very difficult to generalise Steel, Alloy����������������������������������������������������������������������������������������������������������������12 – 13
on this phase as it is closely tied with the type of material the finish Steel, Alloy 300-400 Brinell������������������������������������������������������������������������������ 7 – 10
required, depth of hole, and chip capacity of the reamer. For machine Stainless Steel���������������������������������������������������������������������������������������������������������� 5 – 12
reaming 0.20mm for a 6mm hole, 0.30mm for a 12mm hole, and
0.50mm for a 50mm hole, would be a typical starting point guide. Chatter
For hand reaming, stock allowances are much smaller, partly because
The presence of chatter while reaming has a very bad effect on reamer
of the difficulty in hand forcing the reamer through greater stock.
life and on the finish of the hole. Chatter may be the result of several
A common allowance is 0.08mm to 0.13mm.
causes, some of which are listed:
Speeds 1. Excessive speed.
2. Too much clearance on reamer.
The most efficient speed for machine reaming is closely tied in with
3. Lack of rigidity in jig or machine.
the type of material being reamed, the rigidity of the set-up, and the
4. Insecure holding of work.
tolerance or finish required. Quite often the best speed is found to lie
5. Excessive overhang of reamer in spindle.
around two-thirds the speed used for drilling the same material.
6. Excessive looseness in floating holder.
A lack of rigidity in the set-up may necessitate slower speeds, while 7. Too light a feed.
occasionally a very compact, rigid operation may permit still higher speeds. Correcting the cause can materially increase both reamer life and the
When close tolerances and fine finish are required it is usually found quality of the reamed holes.
necessary to finish the reamer at considerably lower speeds.
Coolants for Reaming
In general, reamers do not work well when they chatter. Consequently,
In reaming, the emphasis is usually on finish and a lubricant is normally
one primary consideration in selecting a speed is to stay low enough
chosen for this purpose rather than for cooling. Quite often this means a
to eliminate chatter. Other ways of reducing chatter will be considered
straight cutting oil.
later, but this one rule holds: SPEEDS MUST NOT BE SO HIGH AS TO
PERMIT CHATTER.
Inch mm Inch mm
240
Special Sales
T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au
d2
sq
sq a/f _________________
Machine Direction:
Emulsion >10%
Tapping Attachment
Characteristics of Material:
Tapping Chuck (rigid)
Short Chipping
Long Chipping
Vertical Feed:
Collet Chuck (length
Horizontal
CNC compensating)
Hole Type:
Oblique
Mechanical
Through Hole
Blind Hole
Work Piece Holder:
Pneumatic
Stationary
Hydraulic
Tapping Hole Size: ___________
Drilled
Cast
Punched
Manual
Rotating
Hole Depth: ________________________________
Drawing / Notes
Item # 499980185B
Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015
Special Sales
T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au
d _________________
d
3 4
__________________
d _________________
d
5 6
__________________
Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015
Special Sales
T: (61 3) 9280 0800 F: (61 3) 9464 0015 E: specsales@sutton.com.au
l3 l3 l3 l3
l1 l l2 l2 l1 l l2 l2
1 1
l3 l l3 l
3
d1
d1
d2
d2
3
l2 l
d2
d2
d1
d1
l2 l 2
2
d1
d2
d2
d1
d1
d2
d2
d1
Norm-Ø d1 (4 – 20mm) (3 – 20mm)
Shank-Ø d2 (DIN 6535) (DIN 6535)
Shank length l3 (DIN 6535) (DIN 6535)
Shank form
HA
HE (DIN 6535)
HA
HE (DIN 6535)
Drilling depth l3 (maximum 7 x D) (maximum 7 x D)
Flute length l2 (9.5 – 155mm) (9.5 – 155mm)
Total length l1 (60 – 205mm) (60 – 205mm)
Point angle
120°
130°
140°
120°
130°
140°
Point geometry (specify if known) (specify if known)
d3
d1
d21
d2
d1
d12
d2
d3
d3
2 2
l4 l4 l
l4 4
d3
d1
d2
d1
d2
d3
d3
d1
d2
d1
d2
d3
Application types
Straight Shank (DIN 6535)
HA
HB
HE
Slotting
Roughing Slotting Roughing
Peripheral Geometry
Finishing
Finishing endmills
Copy milling
(Ø 3 – 20mm)
N
with Chip Finishing Copy milling
Breaker
Roughing endmills
(Ø 6 – 20mm)
Fine
Coarse Drawing / Notes
Face Geometry
Point angle ws (180º + 5º)
Cutting to Centre
Yes
No
Corner Preparation
Sharp edge
Yes
No
Corner protection mm x 45º (Ø 0.03 – 1.5mm )
Corner radius mm x d1 (Ø 0.3 – 2/3mm)
Ballnose
Yes
No
Item # 499980185D
Please copy and fax to our Special Sales Dept. on (61 3) 9464 0015
Adding Value to Industry Terms & Conditions of Sale
1. General
In these conditions of sale:
We continue to expand our business “the seller” means Sutton Tools Pty. Ltd. (A.B.N. 12 004 175 731)
and produce ever higher levels “the buyer” means the person or company placing an order with the seller for the purchase of goods/services.
“the goods/services” means the goods/services supplied by the seller under its contract with the buyer.
of specifications that exceed
market expectations. 2. Payment
2.1 The purchase price in relation to goods/services shall be payable net within 30 days from the end of the month in which the goods/services
were despatched by the seller to the buyer, unless other terms of payment are expressly stated in writing and signed by the seller.
2.2 Should the buyer fail to pay any amount to the seller when it is due, in respect to any order, the seller in addition to any other rights it
World Class Cutting Tools may have, shall be entitled to suspend further deliveries in respect to any order.
Founded in 1917, Sutton Tools began as a family enterprise, 3. Rights in relation to goods/services
manufacturing threads and gauges, and over time has 3.1 The property in the goods/services shall not pass to the buyer until payment in full on any account whatsoever has been received by
expanded its expertise into a broader portfolio of cutting the seller, and the buyer’s payment has been honored.
3.2 If the buyer fails to honor any of these Terms & Conditions of Sale, the seller, without notice shall have the right to take possession of
tools. Today, Sutton Tools remains an Australian family the goods/services and/or recover the full amount owing to the seller together with interest and costs.
business that is renowned for its high-quality cutting tools 3.3 The buyer shall hold the goods/services supplied by the seller in such a way as to identify them as being goods/services in which the
and power tool accessories for a wide range of specialised property has not passed to the buyer pending payment in full.
industrial applications. 3.4 Until payment of all debts owing to the seller (some which may not necessarily be due for payment), the seller has the right to retake
and resume possession of any of the goods/services, should an arrangement under Part X of the Bankruptcy Act 1966 be invoked
Sutton Tools manufactures cutting tools at three sites against the buyer, or the buyer is placed into receivership/liquidation or wound up.
across Victoria, both for the domestic market and for export. 4. General condition of sale
The bulk of general production occurs at our head office site
4.1 Delivery Free into store, to Sutton Tools Distributors, in pack quantities as detailed in the price list.
at Thomastown, in Melbourne’s northern suburbs, with more 4.2 Minimum orders value $250.00 nett for F.I.S delivery. Orders less than $250.00, a $10.00 service and handling fee will apply.
specialised operations centred at our Maryborough facility. 4.3 Goods sent direct to end users: a surcharge of $25.00 will apply to consignments less that 5 kilo’s, above 5 kilo’s – price on application.
We also have overseas production plants in Auckland, If applicable, GST of 10% will be charged.
New Zealand, and in the Netherlands. 4.4 All prices shown are in AUSTRALIAN DOLLARS.
4.5 Priced items are stockable; items outside this range are made to special order only. The prices set out and referred to herein are
While Sutton Tools supplies tools to a broad spectrum of recommended prices only and there is no obligation to comply with the recommendation.
industries - including general manufacturing, electronic 5. Claims and defects
manufacturing, automotive, medical, mining and power 5.1 Claims due to customer ordering errors will be subject to a restocking charge of 15% and must be returned in a saleable condition -
generation - most advancement in material technology it unmarked, unopened, pristine condition to current specifications. Sutton Tools’ sales department should be contacted prior to any goods
experiences are occurring in the aerospace, defence and oil/ being returned. Any goods being returned should be freighted at Customer / Buyer cost.
gas industries. The development of so-called ‘super alloys’ 5.2 Claims must be reported without delay upon discovery of the same and in any event not later than 7 working days following delivery.
5.3 Where complaints in respect to defects or warranted goods are justified our liability is limited solely to the obligation to take back the
for these sectors is constantly pushing material
goods and to replace them free of charge.
performance boundaries. 5.4 The company reserves the right to adopt without prior notice, standards and dimensions other than those set forth herein.
Sutton Tools has a long standing commitment to our
Disclaimer: Whilst every effort has been made to ensure that the information is accurate, Sutton Tools reserve the right to correct any errors,
employees and partners. We have a highly focused team inaccuracies or omissions and to change or update information at any time without prior notice.
who are dedicated to produce and deliver our globally
competitive program of high value products. We continue
to expand our business and produce ever higher levels of
specifications that exceed market expectations.
Our aggressive investment policy compliments our product
offer with globally integrated logistics, research and
development and value added services at world best practice.
ISO / VDI Material Table
2020
Use this cross reference table to identify recommended tool
application by material group. Tool applications can be found
at the bottom of each page.
UNI
K F Cast Iron GG
N N Non-Ferrous Metals, Aluminiums & Coppers AI W
S S Titaniums & Super Alloys Ti Ni
H H Hard Materials (≥ 45 HRC) H
^ VDI
3323 material groups can also be determined by referring to the material
cross reference listing in the application guide at the back of this catalogue.
Industrial Catalogue
10 Steel - High alloy, cast & tool A 200 680
11 HT 325 1100
12 Steel - Corrosion Ferritic / Martensitic A 200 680
resistant & cast
13 Martensitic QT 240 810
14.1 Stainless Steel Austenitic AH 180 610
M 14.2 Duplex 250 840
14.3 Precipitation Hardening 250 840
15 Cast Iron - Grey (GG) Ferritic / Pearlitic 180 610
16 Pearlitic 260 880
17 Cast Iron - Nodular Ferritic 160 570
K (GGG)
18 Pearlitic 250 840
19 Cast Iron - Malleable Ferritic 130 460
Effective 1st August 2020
INDUSTRIAL
20 Pearlitic 230 780
21 Aluminum & Magnesium Non Heat Treatable 60 210
- wrought alloy
22 Heat Treatable AH 100 360
CATALOGUE
23 Aluminum & Magnesium Non Heat Treatable 75 270
- cast alloy ≤12% Si
24 Heat Treatable AH 90 320
25 Al & Mg - cast alloy >12% Si Non Heat Treatable 130 460
2020
N
26 Copper & Cu alloys Free cutting, Pb > 1% 110 390
(Brass/Bronze)
27 Brass (CuZn, CuSnZn) 90 320
28 Bronze (CuSn) 100 360
29 Non-metallic - Thermosetting & fiber-reinforced plastics
30 Non-metallic - Hard rubber, wood etc.
31 High temp. alloys Fe based A 200 680
32 AH 280 950
33 Ni / Co based A 250 840
Sutton Tools Pty Ltd ABN 12 004 175 731 34 AH 350 1180
35 C 320 1080
Australia (Head Office)
S 36 Titanium & Ti alloys CP Titanium 400 MPa
378 Settlement Road, Thomastown 3074, Victoria Australia
37.1 Alpha alloys 860 MPa
T +61 3 9280 0800 F +61 3 9464 0015
37.2 Alpha / Beta A 960 MPa
Customer Service alloys
37.3 AH 1170 MPa
T 1800 335 350 F 1800 333 127 E cservice@sutton.com.au
37.4 Beta alloys A 830 MPa
Special Sales AH 1400 MPa
37.5
T 1800 035 010 F 1800 804 084 E specsales@sutton.com.au
Since 1917