Guide On GSTR 1 Filing On GST Portal

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 53

Products

Complete GST lifecycle on one platform

Claim max Smart Download


ITC with validations 20+ PAN-
AI-driven & PAN-level level
engine filing reports in
mins

Request a demo

HOME GST GST-TERMS GUIDE ON GSTR…

Guide on GSTR 1 filing on GST Portal


Updated on: Jan 12th, 2022 | 33 min read

CONTENTS [ Show ]

Every registered dealer is required to file the GSTR-1 return for each month/quarter
as applicable. The return contains details of all outward supplies made during that
particular tax period.

1st February 2022


Budget 2022 updates-
(1) The last date to make amendments, corrections in GSTR-1, and
upload missed invoices or debit/notes of one financial year is no
longer the due date to file September return of the following year,
but it is 30th November of the following
Request year or filing of annual
a Demo
return, whichever is earlier.
(2) The amendments also prescribe tax period-wise sequential filing
of details of outward supplies.

21st December 2021


(1) From 1st January 2022, taxpayers cannot file GSTR-1 if the
previous period’s GSTR-3B was not filed.
(2) From 1st January 2022, the GST officers can initiate recovery
proceedings without any show-cause notice against taxpayers who
under-report sales in GSTR-3B compared to GSTR-1.

29th August 2021


Company taxpayers can continue filing GSTR-1 and GSTR-3B using
EVC or DSC up to 31st October 2021 via the CGST notification
number 32/2021 dated 29th August 2021.

26th August 2021


From 1st September 2021, taxpayers will not be able to file GSTR-1 or
use the IFF for August 2021 on the GST portal if they have pending
GSTR-3B filings. It applies if GSTR-3B is pending for the past two
months till July 2021 (monthly filer) or for the last quarter ending 30th
June 2021 (quarterly filer) as per CGST Rule 59(6).
The due date for GSTR-1 is usually 11th of the succeeding month (previously, it was
10th of the next month until September 2018). For quarterly filers, the due date is
the 13th of the month following the quarter.

The GSTR-1 return can be filed on the GST Portal/ GSTN. But there are some
challenges that you may face while importing data:

If the number of sales invoices is more than 500, then the GST Offline Utility
has to be downloaded and the return file needs to be generated from this
offline utility.

There is no option to perform bulk action on invoices.

The HSN-wise summary has to be manually filled in.

If you use ClearTax GST Software you will be able to file returns quickly with:

Bulk import and updating of sales invoices

Upload of sales details at a click of a button. No need to login to the GST


Portal.

Auto filling of HSN-wise summary based on sales details imported by you.

Here is a step-by-step guide on how to file GSTR-1 on the GST Portal :

Log in and navigate to the GSTR-1 return

Login to the GST Portal

Go to Services. In the drop-down click on Returns > Returns Dashboard

This will take you to the Return filing page. From the drop down menu, select
the financial year and the month for which you want to file the return. Click on
‘Search’.

Select quarterly or monthly GSTR-1 filing

Step 1: The ‘Option form for quarterly return filing by normal taxpayer page’ is
displayed. 

Step 2: Choose ‘yes’ or ‘no’ for the questions listed below, as applicable: “Whether
your aggregate turnover during the Previous Financial Year was upto Rs. 1.5 Crores
or Do you expect your aggregate turnover during the Current Financial Year to be
upto Rs. 1.5 Crores?”. 

I. In the case of ‘yes’ for the first question– Select ‘yes’ or ‘no’ for the second
question “Would you like to opt for quarterly filing of tax return?”

 1. If yes, click on the submit button. 


A pop-up will open on the screen to confirm quarterly return filing. Click on
proceed.

A success message will be displayed. 

2. In case of No: Click the submit button.

A pop-up will open on the screen to confirm monthly return filing. Click on proceed.

A success message will be displayed. 

II. In case of No for the first question: Click the submit button.


A message will be displayed. Click proceed. 

III. Editing the return filing frequency: If a taxpayer wants to change the
preference for return filing, follow the steps below: 

1. Click on the ‘Edit’ button.

2. Change the preference as required, and click on ‘Submit’.


 A message will be displayed stating that the return filing frequency has been
changed. Click on ‘Close’. On the GSTR-1 return page, the return filer has two
option – Prepare the return online or offline. Let us take a look at the process of
preparing the return online. Click on ‘Prepare online’.

This will take you to Details of outward supplies of goods or services.


Following details need to be filled here-
Aggregate Turnover of previous Finacial Year. For example, for the returns of
July 2017 to March 2017, Financial Year means 1st April 2016 to 31st March 2017.

Aggregate Turnover for April 2017 to June 2017.

India’s Fastest and Most Advanced 2B


Start Matching
Matching
Maximise ITC claims, use smart validations to correct your
data and complete 2B matching in <1 minute

Download and edit e-invoice data (if applicable)

This section is applicable to e-invoicing eligible entities only. Access our step-by-


step guide on how to edit e-invoice data in the GSTR-1 return.

Enter details for the current tax period in the various tiles

GSTR-1 – Invoice Details

4A, 4B, 4C, 6B, 6C – B2B Invoices

5A, 5B – B2C (Large) Invoices

9B – Credit / Debit Notes (Registered)

9B – Credit / Debit Notes (Unregistered)

6A – Exports Invoices

9A- Amended B2B invoice

9A- Amended B2C large invoice

9A- Amended Export invoices


9C- Amended Credit/Debit Notes (Registered)

9C- Amended Credit/Debit Note (Unregistered)

GSTR-1 – Other Details

7- B2C Others

8A, 8B, 8C, 8D – Nil Rated Supplies

11A(1), 11A(2) – Tax Liability (Advances Received)

11B(1), 11B(2) – Adjustment of Advances

12 – HSN-wise-summary of outward supplies

13 – Documents Issued

11A – Amended tax liability (Advance received)

11B Amended of Adjustment of Advances

10- Amended B2C (Others)

B2B

1. 4A, 4B, 4C, 6B, 6C – B2B Invoices

All B2B Invoice details are required to be entered inside this tile.

Step 1 – Click on the 4A, 4B, 4C, 6B, 6C – B2B Invoices tile.

Step 2 – Click on Add Invoice


Step 3 – The following details should be entered on this page –

Select the check box for Deemed Exports, SEZ Supplies with Payment or SEZ
Supplies Without Payment, if applicable.

Enter the receivers GSTIN/ UIN . Once this is done the Receivers Name, POS
and Supply Type will be auto populated.

Enter the Invoice No., Invoice Date and Invoice Value

In case the supply attracts reverse charge or supply is through e-commerce


operator select the check box.

Enter the Taxable Value of supplies made in the taxable value field. Based on
inter-state or intra-state transactions CGST and SGST or IGST will appear in
the amount of tax field. The Amount of tax is auto calculated based on the
taxable value entered.

Click on Save once all the details are entered.


Step 4 – You will be redirected to a page where you can see the summary of all the
invoices entered. You can edit/delete invoices here (under Actions).

Step 5 – Click the BACK button to go back to the Invoices – Receiver-Wise-


Summary page. You can add invoice of a particular receiver by clicking on a
receiver details and clicking on add invoice button at the bottom of the page.

Step 6 – Click on Back button to go back to GSTR-1 page. You will see that the B2B
Invoices tile in GSTR-1 reflects the number of invoices added along with Total
Invoice value, Total taxable value, and total tax liability.
B2C

2. 5A, 5B – B2C (Large) Invoices

All outward supplies made to a consumer and the invoice value is more than Rs 2.5
lakh has to be entered in this tile.

Step 1 – Click on the 5A, 5B – B2C (Large) Invoices tile.

Step 2 – You will see a summary of the  B2C (Large) Invoices. Click on Add Invoice
to add a new invoice.

Step 3 – The following are the details that should be entered on this page –

In the POS field select the state where the goods are delivered in the drop
down. The supply type will be auto-populated based on this.

Enter the Invoice No., Invoice Date, Total Invoice Value.

In case the supply is made through e-commerce operator tick the checkbox
‘Is E-commerce’.

Enter the Taxable Value of supplies made in the taxable value field. Based
on inter-state or intra-state transactions CGST and SGST or IGST will appear
in the amount of tax field. The Amount of tax is auto-calculated based on the
taxable value entered.

Click on Save once the details are entered.


Step 4 – You will be redirected to a page where you can see the summary of all the
invoices entered. You can edit/delete invoices here (under Actions).

Step 5 – Click on Back button to go back to GSTR-1 page. You will see that the B2B
Invoices tile in GSTR-1 reflects the number of invoices added along with Total
Invoice value, Total taxable value, and total tax liability.
CDN

3. 9B – Credit / Debit Notes (Registered)

As the heading suggests this tile is to add the Credit and Debit Note issued to
registered dealers.

Step 1 – Click on the 9B – Credit / Debit Notes (Registered) tile.

Step 2 – On the summary page click on Add Details to add Credit or Debit Note.

Step 3 – In this page the following details need to be entered –

Enter the Receivers GSTIN. The name will get auto populated.

Enter the Debit/ Credit Note no. and Date.

In the Original Invoice No. and Date field enter the date and number of the
invoice against which the debit note or credit note is issued.

In the Note Type drop down select whether the details added are for a debit
note, credit note or refund voucher.

Enter the Note Value and the Reason for Issuing Note.
If the original invoice was issued before 1st July 2017 tick on the check box
Pre- GST Regime.

Enter the Taxable Value of goods or services in the taxable value field. Based
on inter-state or intra-state transactions CGST and SGST or IGST will appear
in the amount of tax field. The Amount of tax is auto calculated based on the
taxable value entered.

Click on save once the details are entered.

Step 4 – Click on back button to go back to GSTR-1 page. You will see the
summary of all the debit notes/ credit notes/ refund vouchers added.
4. 9B – Credit / Debit Notes (Unregistered)

This tile is to add the Credit and Debit Note issued to unregistered dealers.

Step 1 – Click on the Credit / Debit Notes (Unregistered) tile.

Step 2 – On the summary page click on Add Details to add Credit or Debit Note.

Step 3 – The following are the details that should be entered on this page –

Choose the right type from the drop down like B2CL, export without payment,
etc.

Enter the Debit/ Credit Note no. and Date.


In the Original Invoice No. and Date field enter the date and number of the
invoice against which the debit note or credit note is issued.

In the Note Type drop down select whether the details added are for a debit
note, credit note or refund voucher.

Enter the Note Value and the Reason for Issue of Note.

If the original invoice was issued before 1st July 2017 tick on the check box
Pre- GST Regime.

Enter the Taxable Value of goods or services in the taxable value field. Based
on inter-state or intra-state transactions CGST and SGST or IGST will appear
in the amount of tax field. The Amount of tax is auto calculated based on the
taxable value entered.

Click on save once the details are entered.

Step 4 – You can see the summary of all the debit notes/ credit notes/ refund
vouchers issued to unregistered dealer added here.
Amendments

5. 6A – Exports Invoices

Invoices for supplies exported has to be added in this section.

Step 1 – Click on the 6A – Exports Invoices tile.

Step 2 – On the summary page click on Add Details to add invoice of exports.

Step 3 – The following details have to be entered here –

Enter the Invoice No., Invoice Date and Port Code details in the respective
fields

Now enter details of Shipping Bill Number and Date

In the Total Invoice Value field, enter the total amount of all the goods or
services supplied

In the GST Payment select from the dropdown if GST is paid or not.

Enter the Taxable Value. IGST will be auto calculated

Click on Save.
Step 4 -Click on back button to go back to GSTR-1 page. You wil see the summary
of all the Export Invoices added.

6. 9A- Amended B2B invoice


A taxpayer shall follow the steps below for making amendments in details of
outward supplies already furnished in the returns of prior periods. 

Step 1: Click on the 9A – Amended B2B Invoice tile.

Step 2: Select the financial year from the drop down list. Then, enter the invoice
number which you want to amend from the earlier tax period. Click on the ‘Amend
invoice’ button.

Step 3: Enter the revised invoice number under the ‘Revised invoice number’ field.
Select the revised invoice date from the calendar and make other changes as
required. Click on ‘Save’.
The taxpayer will be redirected to the previous page with a message as shown
below.
Step 4: Click on ‘Back’. The taxpayer will be redirected to the GSTR-1 landing page
and the ‘9A – Amended B2B invoices’ tile in the GSTR-1 will reflect the number of
invoices which are amended along with the total tax liability. The taxpayer will
have to pay tax only on the differential tax amount in the current tax period.

7. 9A- Amended B2C large invoice

Step 1: Click on the ‘9A- Amended B2C (large) invoice’ tile.

Step 2:  Select the financial year from the drop down list. Then, enter the invoice
number which you want to amend from the earlier tax period. Click on the ‘Amend
invoice’ button.
Step 3: Enter the revised/original invoice number for the invoice to be amended.
Select the revised/original date using the calendar. Make amendments in the
invoice as per requirement, and then click on ‘Save’.

A taxpayer will be redirected to the previous page with the message displayed
below.
The GSTR-1 landing page will reflect the number of invoices amended, along with
total tax liability. The taxpayer has to pay tax only on the differential tax amount.

8. 9A- Amended Export invoices

A taxpayer shall perform the steps given below, to make amendments in the
export invoices: 

Step 1: Click on the ‘9A- Amended export invoices’ tile.


Step 2: Select the financial year from the drop-down list. Then, enter the invoice
number which you want to amend from the earlier tax period. Click on the ‘Amend
invoice’ button.

Step 3: Enter the revised/original invoice number for the invoice to be amended.
Select the date using the calendar and then make the amendments as required.
Click on ‘Save’.
A taxpayer will be redirected to the previous page with the message displayed
below.

On the GSTR-1 landing page, the ‘9A – Amended export invoices’ tile will reflect
the number of invoices amended, along with the total tax liability. The taxpayer
has to pay tax only on the differential tax amount.

9. 9C- Amended Credit/Debit Notes (Registered)


Step 1: Click on the ‘9C- Amended credit/debit notes (Registered)’ tile.

Step 2: Select the financial year and enter the credit/debit note number which you
want to amend from the earlier tax period. Then, click on the ‘Amend note’ button.

Step 3: Update the revised credit/debit note number. Select the date from the
calendar. Make amendments as required. Then, click on the ‘Save’ button.
A taxpayer will be redirected to the previous page with the message displayed
below.

Click on the ‘Back’ button. On the GSTR-1 landing page, the ‘9C- Amended credit
note/debit note (Registered)’ tile will be updated with the number of invoices
amended along with the taxable value. A taxpayer will have to pay the differential
tax amount (net of amended debit notes – amended credit notes)

10. 9C- Amended Credit/Debit Note (Unregistered)

Select the 9C amended credit/debit note (Unregistered) tile and then follow the
same steps as mentioned above.

B2C Others

1. 7- B2C Others

All supplies that are B2C and the amount is less than Rs 2.5 lakh, the details of
those invoices have to be entered here.

Step 1 – Click on the 7- B2C Others tile.

Step 2 -Select E-commerce tab to add details for a transaction through E-


commerce or else select Other than E-commerce tab in case transaction is
through non E-commerce. Click on Add Details button on the bottom right.

Step 3 – The following details have to be entered here –

Select Place of Supply (State Code) where supply was delivered. The Supply
Type field gets auto populated

Enter the Value of Taxable supplies made

Select Rate of GST applicable

Enter GSTIN of e-commerce operator(if any)


Click on Save

Step 4 -Click on back button to go back to GSTR-1 page. You can see the
summary of B2C others invoices here.

2. 8A, 8B, 8C, 8D – Nil Rated Supplies

All supplies made which attract nill rate of GST should be entered in this tile.

Step 1 – Click on the 8A, 8B, 8C, 8D – Nil Rated Supplies tile

Step 2 -Click on edit to make the fields editable.


Step 3 – Now enter Nil Rated Supplies, Exempted (Other than Nil rated/non-GST
supply), and Non-GST Supplies Amount for the following category –

Inter-state supply to a registered dealer

Inter-state supply to an unregistered dealer

Intra-stare supply to a registered dealer

Intra-stare supply to an unregistered dealer

Step 4 – Click on save and a success message will be displayed on top.
Step 5 -Click on back button to go back to GSTR-1 page. You can see the
summary of all nil rated supplies made.

3. 11A(1), 11A(2) – Tax Liability (Advances Received)

All the supplies for which advances were received from the receiver of supplies but
invoice was not raised will be entered here.

Step 1 – Click on the 11A(1), 11A(2) – Tax Liability (Advances Received) tile

Step 2 -Click on Add Details button on the bottom right.

Step 3 – The following details are required to be entered on this page –

Select Place of Supply (State Code) where supply was delivered. The Supply
Type field gets auto populated

Enter the Gross Advance Received. IGST or CGST and SGST will be calculated
automatically based on supply type(inter-state or intra-state)

Click on Save
Step 4 -Click on back button to go back to GSTR-1 page. You can see the
summary of adjustment of advances.

4. 11B(1), 11B(2) – Adjustment of Advances

Details of all the invoices raised in the month for which return is being filed but
advance was received and tax was already paid in the previous months has to be
entered here

Step 1 – Click on the 11B(1), 11B(2) – Adjustment of Advances tile


Step 2 – Click on Add Details button on the bottom right.

Step 3 – The following details have to be entered here –

From the drop-down select the POS i.e. state in which the outward supply is
made. The supply type will get pre-filled based on the POS selection

Enter the amount received as an advance in Gross Advance Adjusted field.


The IGST or CGST and SGST will be auto calculated

Click on Save button

Step 4 – Click on back button to go back to GSTR-1 page. Here you can see the
summary of adjustment of advances.
HSN

5. 12 – HSN-wise-summary of outward supplies

The GSTR-1 return requires a dealer to provide HSN-wise summary of outward


supplies and rate wise along with quantitative details.

Step 1 –  Click the HSN-wise summary of outward supplies tile.

Step 2 – Click on Add Details button on bottom right.


Step 3 – The following are the details to be provided on this page –

HSN Code of outward Supplies

Description of the outward supplies

In the ‘UQC’ drop-down select the quantity of the supplies. Eg – KGs, Liters,
etc.

Enter the Total Quantity, Total Value and Total Taxable Value of the outward
supplies

Now enter the IGST or CGST and SGST based on the type of sale made viz a
viz inter-state or intra-state

Click on Add and on the next page click on save button.


Step 4 – Click on back button to go back to GSTR-1 page. Here you can see the
summary of HSN-wise outward supplies.

6. 13 – Documents Issued

Every taxpayer is required to provide details of the total document issued during a
month.

Step 1 – Click on the tile Documents Issued

Step 2 – Click on Add Document


Step 3 – There are will be 12 categories of documents. Enter the serial no. of invoice
issued, Total number of invoices issued and cancelled invoices in respective fields.
The net invoices field will be auto populated.

Step 4 – Click on save once all the documents details are entered.

6. 11A – Amended tax liability (Advance received)


Step 1: Click on the 11A- Amended tax liability tile.

Step 2: Select:

Financial year- For which the taxpayer wants to make amendments

POS- For the line item of the declarations of the previous tax periods.

Return filing period- For declarations of previous tax periods.

Click on the ‘Amend invoice’ button.

Step 3: Make the amendments as required. But, the place of supply cannot be
amended. Click on ‘Save’.
The taxpayer will be directed to the previous page with the message displayed
below.
On the GSTR-1 landing page, the ‘11A- Amended tax liability (Advance received)’
tile will be updated with the number of invoices amended along with the taxable
value. The taxpayer will have to pay tax in this tax period only on the differential
tax liability.

7. 11B Amended of Adjustment of Advances

Step 1: Click on the ‘11B – Amended of adjustment of advances’ tile.

Step 2: Select:

Financial year- For which the taxpayer wants to make amendments

POS- For the line item of the declarations of the previous tax periods.

Return filing period- For declarations of previous tax periods.

Click on the ‘Amend invoice’ button.

Make the changes as required. Note that you cannot amend the place of supply.
Click on the ‘Save’ button.
A taxpayer will be redirected to the previous page with a “Request accepted”
message
Click on the ‘Back’ button. On the GSTR-1 landing page, the ‘11B- Amended of
adjustment of advances’ tile will be updated with the number of invoices amended
along with the taxable value. The taxpayer will have to pay tax in this tax period
only on the differential tax liability.

Step 1: Click on the ‘10 – Amended B2C (others)’ tile.

Step 2: Select the year and month of the line items of declarations of previous tax
periods from the drop-down list. Then select the original POS and click on the
‘Amend details’ button.

Step 3: Select the revised/original state code from the drop down list. Make the
amendments as required. Note that the place of the supply field cannot be
amended. Click on ‘Save’.
The taxpayer will be directed to the previous page with the message displayed
below.

Click on the ‘Back’ button. On the GSTR-1 landing page, the ‘10- Amended B2C
(others)’ tile will be updated with the number of invoices amended along with the
taxable value. The taxpayer will have to pay tax in this tax period only on the
differential tax liability.

Generate the GSTR-1 summary

Scroll to the bottom of the page and click on the ‘Generate GSTR-1 summary’ to
include the auto-populated details pending for action by the recipients.

 The following message will appear on the screen once the summary has been
generated. You can check back after one minute.

After the summary is generated, a success message will appear on top of the
page.

The summary will be generated by the GST Portal automatically at intervals of 30


minutes. To view the summary instantly after adding invoices, you can generate
the summary by clicking on the ‘Generate GSTR-1 Summary’ button. However, the
summary can be generated only at intervals of 10 minutes. If you attempt to
generate the summary before 10 minutes have elapsed, you will notice an error
message on the top of the page.

Preview the GSTR-1

Once the GSTR-1 summary has been generate, click on the ‘Preview’ button. This
will download the draft summary of the GSTR-1 return for your review. It is
recommended that you review the summary of entries made in the various
sections submitting the GSTR-1.

Acknowledge and submit the GSTR-1 return

Once the GSTR-1 return is ready to be submitted, select the acknowledgement


checkbox confirming that you have reviewed the details and that the information
furnished is correct, and that you are aware that no changes can be made after
submitting the GSTR-1. Once you select the acknowledgement checkbox,
the submit button will be enabled.
Click on the ‘Submit’ button to submit the GSTR-1. A pop-up will open. Click on
‘Proceed’ if you wish to confirm submission. The GSTR-1 status will change to
‘Submitted’.

File GSTR-1 with DSC or EVC

Once the GSTR-1 return has been submitted, click on the ‘File Return’ button.

Click on ‘File with DSC’ or ‘File with EVC’, as applicable, to file the GSTR-1 return.
Select the digital signature if filing through DSC mode, or enter the OTP sent on the
mobile number and email address of the authorised signatory to file via EVC mode.

A success message and the ARN will get displayed on successful filing.
ClearTax GST software can also be used to file GSTR-1. Its simple and easy.

BROWSE BY TOPICS

Income Tax e-Filing

Last Date To File ITR For 2022-23

Income Tax Slabs FY 2023-24

Which Is Better: Old vs New Tax Regime For Salaried Employees?

House Property

Business, Professional &amp; Freelance

Which ITR Should I File?

Income Tax Refunds

Paying Tax Due

Salary Income

Capital Gains Income

Other income sources

Advance Tax

NRI

HUF

Income Tax Notices


POPULAR ARTICLES

Budget 2023 Highlights: PDF Download, Key Takeaways, Important Points

Budget 2023: Full List of Cheaper and Costlier Items

GST Collection October 2022

GSTR 9C : Reconciliation Statement & Certification- Filing, Format & Rules

GST Return – What is GST Return? Who Should File, Due Dates & Types of GST Returns

GST Rates in 2022 – List of Goods and Service Tax Rates, Slab & Revision

Eway Bill – What is Eway Bill? E Way Bill System, Rules & Generation Process Explained

Types of GST applicable on E-Commerce Sales

Guide to File CMP-02 on GST Portal

gst.gov.in : Government Website for GST Portal Online

RELATED ARTICLES

Understanding the basics of GST

Sections 206AB and 206CCA of Income Tax: Analysis, Applicability and FAQs

Terms and phrases you must know under GST- Part I

Mixed Supply &amp; Composite Supply under GST

All about Reverse Charge Mechanism (RCM) under GST

Follow us on C O M PA N Y

About us
Contact us

Have a query? Careers


Media & Press
Support
User reviews
Engineering blog
Clear Library
FinTech glossary
ClearTax Chronicles
GST Product Guides
Trust & Safety
Cleartax(Saudi Arabia)

PRODUCTS

Individuals Income Tax Filing

Income Tax e Filing Income Tax App android


Tax Planning Income Tax
ClearInvestment Secion 80 Deductions
ClearServices Income tax for NRI
Mutual Funds & ITR e-filing App
Mutual funds

ClearGST Enterprises

GST ClearGST
GST Login ClearE-Waybill
GST software e-Invoicing Software
New GST returns ClearTDS
e-invoicing eWay Bill Registration
Input tax credit

CAs SMEs

CA partner program ClearGST


ClearGST ClearOne
ClearTDS Billing Software
ClearTaxCloud Invoicing Software
ClearPro App Services for businesses
ClearOne App

ClearServices HSN Lookup

Tax filing for professionals HSN Code Finder


Tax filing for traders Cement HSN Code
Clear Launchpad Transport HSN Code
Trademark Registration Plastic HSN Code
Company Registration Cloth GST Rate
TDS returns Books GST Rate
MSME Registration
RESOURCES & GUIDES

GST Resources ITR Resources

GST Registration Income Tax Slab


GST Returns Form 26AS
GST Procedure What is Form 16
GST News & Announcement Salary Income
GSTR 9 Annual Returns How to File TDS Returns
GST Payments & Refunds New Income Tax Portal
Invoicing Under GST Incometax.gov.in
GSTR-2B Income from Selling Shares
GSTR-3B Income Tax Due Dates

Mutual Fund Resources Business Resources

How to Invest in Mutual Funds Memorandum of Understanding (MoU)


Mutual fund Types Mudra Yojana
ELSS Inflation & Deflation
SIP Mutual Funds Loan Agreement
Hedge Funds Succession Certificate
Debt Funds Solvency Certificate
NFO Debt Settlement Agreement
What is AMFI Rental Agreement
What is NAV Letters Of Credit

TO O LS

Income tax calculator PPF Calculator


EMI Calculator GST number search
Mutual fund calculator IFSC Code Search
HSN Code Finder Generate rent receipts
SIP calculator Home Loan EMI Calculator
GST calculator NPS Calculator

HRA calculator Find HSN code


RD Calculator Tax Saving Calculator
FD Calculator Get IT refund status
Gold Rates Today Salary Calculator
Currency Converter EPF Calculator
Compound Interest Calculator GST Number Search by Name

TRENDING MUTUAL FUNDS

ICICI Prudential Technology Fund Direct Plan Growth Tata Digital India Fund Direct Growth

Axis Bluechip Fund Growth ICICI Prudential Technology Fund Growth

Aditya Birla Sun Life Tax Relief 96 Growth

Aditya Birla Sun Life Digital India Fund Direct Plan Growth

Quant Tax Plan Growth Option Direct Plan SBI Technology Opportunities Fund Direct Growth

Axis Long Term Equity Fund Growth

TO P A M CS

SBI Mutual Fund Nippon India mutual fund HDFC Mutual Fund UTI mutual fund

Kotak Mahindra Mutual Fund ICICI Prudential Mutual Fund Aditya Birla Mutual Fund

Axis mutual fund

STO CK M A R K E TS

Stock Market Live Yes Bank Share Price SBI Share Price IRCTC Share Price

ITC Share Price TCS Share Price Tata Motors Share Price Infosys Share Price

Idea Share Price HDFC Bank Share Price

BEST FUNDS
Best Mutual Funds Best Tax Savings Mutual Funds Best Index Funds

Best Equity Mutual Funds

Clear offers taxation & financial solutions to individuals, businesses, organizations & chartered accountants in India. Clear
serves 1.5+ Million happy customers, 20000+ CAs & tax experts & 10000+ businesses across India.

Efiling Income Tax Returns(ITR) is made easy with Clear platform. Just upload your form 16, claim your deductions and get
your acknowledgment number online. You can efile income tax return on your income from salary, house property, capital
gains, business & profession and income from other sources. Further you can also file TDS returns, generate Form-16, use
our Tax Calculator software, claim HRA, check refund status and generate rent receipts for Income Tax Filing.

CAs, experts and businesses can get GST ready with Clear GST software & certification course. Our GST Software helps
CAs, tax experts & business to manage returns & invoices in an easy manner. Our Goods & Services Tax course includes
tutorial videos, guides and expert assistance to help you in mastering Goods and Services Tax. Clear can also help you in
getting your business registered for Goods & Services Tax Law.

Save taxes with Clear by investing in tax saving mutual funds (ELSS) online. Our experts suggest the best funds and you
can get high returns by investing directly or through SIP. Download Black by ClearTax App to file returns from your mobile
phone.

CLEARTAX IS A PRODUCT BY DEFMACRO SOFTWARE PVT. LTD.


Company Policy Terms of use

ISO 27001
Data Center

SSL Certified Site


128-bit encryption

You might also like