Professional Documents
Culture Documents
Jee CT 3 - 10.07.2023
Jee CT 3 - 10.07.2023
Jee CT 3 - 10.07.2023
2023)
8. Three identical spherical shells, each of mass m and radius r are placed as shown in figure.
Consider an axis XX′ which is touching the two shells and passing through the diameter of the
third shell. Moment of inertia of the system consisting of these three spherical shells about XX′
axis is
16 2 11 2
(a) mr (b) 4mr2 (c) mr (d) 3mr2
5 5
9. The moment of inertia of a uniform circular disc is maximum about an axis
perpendicular to the disc and passing through
(a) B (b) C (c) D (d) A
10. The moment of inertia of a thin uniform rod of mass M and length L about an axis passing
through its midpoint and perpendicular to its length is I0. Its moment of inertia about an axis
passing through one of its ends and perpendicular to its length is
(a) I0 + ML2/2 (b) I0 + ML2/4 (c) I0 + 2ML2 (d) I0 + ML2
11. A thin rod of length L and mass M is bent at its midpoint into two halves so that the angle
between them is 90°. The moment of inertia of the bent rod about an axis passing through the
bending point and perpendicular to the plane defined by the two halves of the rod is
ML2 2ML2 ML2 ML2
(a) (b) (c) (d)
6 24 24 12
12. Point masses m1and m2 are placed at the opposite ends of a rigid rod
of length L, and negligible mass. The rod is to be set rotating about
an axis perpendicular to it. The position of point P on this rod
through which the axis should pass so that the work required to set
the rod rotating with angular velocity ω0 is minimum, is given by
m m2
(a) x 2 L (b) x L
m1 m1 m2
m1 m1
(c) x L (d) x L
m1 m2 m2
13. An automobile moves on a road with a speed of 54 km h–1. The radius of its wheels is 0.45 m
and the moment of inertia of the wheel about its axis of rotation is 3 kg m2. If the vehicle is
brought to rest in 15 s, the magnitude of average torque transmitted by its brakes to the wheel is
(a) 10.86 kg m2 s–2 (b) 2.86 kg m2 s–2 (c) 6.66 kg m2 s–2 (d) 8.58 kg m2 s–2
14. A uniform rod AB of length l and mass m is free to rotate about point A. The rod is released from
rest in the horizontal position. Given that the moment of inertia of the rod about A is ml2/3, the
initial angular acceleration of the rod will be
15. A solid sphere is rotating freely about its symmetry axis in free space. The radius of the sphere is
increased keeping its mass same. Which of the following physical quantities would remain
constant for the sphere?
(a) Angular velocity. (b) Moment of inertia.
(c) Rotational kinetic energy. (d) Angular momentum.
16. Two rotating bodies A and B of masses m and 2m with moments of inertia IA and IB (IB > IA) have
equal kinetic energy of rotation. If LA and LB be their angular momenta respectively, then
L
(a) LA B (b) LA = 2 LB (c) LB LA (d) LB < LA
2
17. A solid sphere is in rolling motion. In rolling motion a body possesses translational kinetic
energy (Kt) as well as rotational kinetic energy (Kr) simultaneously. The ratio Kt : (Kt + Kr) for
the sphere is
(a) 7 : 10 (b) 5 : 7 (c) 10 : 7 (d) 2 : 5
18. A disc and a sphere of same radius but different masses roll off on two inclined planes of the
same altitude and length. Which one of the two objects gets to the bottom of the plane first?
(a) Both reach at the same time (b) Depends on their masses
(c) Disc (d) Sphere
19. Consider the following statements and select the correct statement(s).
I. Two satellites of equal masses orbiting the earth at different heights have equal moments of
inertia.
II. If earth were to shrink suddenly, length of the day will increase.
III. Centre of gravity cannot coincide with centre of mass.
(a) I only (b) II only (c) I and II (d) I, II and III
20. Assertion (A): When you lean behind over the hind legs of the chair, the chair falls back after a
certain angle.
Reason (R): Centre of mass lying outside the system makes the system unstable.
(a) Assertion is correct, reason is correct; reason is a correct explanation for assertion
(b) Assertion is correct, reason is correct; reason is not a correct explanation for assertion
(c) Assertion is correct, reason is incorrect
(d) Assertion is incorrect, reason is correct
INTEGER TYPE
21. A wheel has angular acceleration of 3.0 rad/sec2 and an initial angular speed of 2.00 rad/sec. In a
time of 2 sec it has rotated through an angle (in radians) of________.
22. A uniform circular disc of radius 50 cm at rest is free to turn about an axis which is
perpendicular to its plane and passes through its centre. It is subjected to a torque which
produces a constant angular acceleration of 2.0 rad s–2. Its net acceleration in m s–2 at the end of
2.0 s is approximately________.
23. Two discs are rotating about their axes, normal to the discs and passing through the centres of the
discs. Disc D1 has 2 kg mass and 0.2 m radius and initial angular velocity of 50 rad s–1. Disc D2
has 4 kg mass, 0.1 m radius and initial angular velocity of 200 rad s–1. The two discs are brought
in contact face to face, with their axes of rotation coincident. The final angular velocity
(in rad s–1) of the system is________.
24. The instantaneous angular position of a point on a rotating wheel is given by the equation (t) =
2t3 – 6t2. The torque on the wheel becomes zero at t = _______(s).
25. A solid cylinder of mass 2 kg and radius 50 cm rolls up an inclined plane of angle inclination
30°. The centre of mass of cylinder has speed of 4 m/s. The distance travelled by the cylinder on
the incline surface will be________. (Take g = 10 m/s2)
CHEMISTRY
26. A mixture of N2 and Ar gases in a cylinder contains 7 g of N2 and 8 g of Ar. If the total pressure
of the mixture of the gases in the cylinder is 27 bar, the partial pressure of N2 is
[Use atomic masses (in g mol–1) : N = 14, Ar = 40]
(a) 9 bar (b) 12 bar (c) 15 bar (d) 18 bar
27. Equal moles of hydrogen and oxygen gases are placed in a container with a pin-hole through
which both can escape. What fraction of the oxygen escapes in the time required for one-half of
the hydrogen to escape?
(a) 3/8 (b) 1/2 (c) 1/8 (d) 1/4
28. 50 mL of each gas A and of gas B takes 150 and 200 seconds respectively for effusing through a
pin hole under the similar conditions. If molecular mass of gas B is 36, the molecular mass of gas
A will be
(a) 96 (b) 128 (c) 32 (d) 64
29. A gas at 350 K and 15 bar has molar volume 20 percent smaller than that for an ideal gas under
the same conditions. The correct option about the gas and its compressibility factor (Z) is
(a) Z < 1 and repulsive forces are dominant
(b) Z > 1 and attractive forces are dominant
(c) Z > 1 and repulsive forces are dominant
(d) Z < 1 and attractive forces are dominant
30. 100 ml O2 and H2 are kept at same temperature and pressure. What is true about their number of
molecules?
(a) NO2 > NH2 (b) NO2 < NH2 (c) NO2 = NH2 (d) NO2 + NH2 = 1 mole
31. The volume–temperature graphs of a given mass of an ideal gas at constant pressure are as
shown below. What is the correct order of pressures?
(a) P1 > P3 > P2 (b) P1 > P2 > P3 (c) P2 > P3 > P1 (d) P2 > P1 > P3
32. Assertion (A): At 300 K, kinetic energy of 16 g of methane is equal to the kinetic energy of 32 g
of oxygen.
Reason (R): At constant temperature, the kinetic energy of one mole of all gases is equal.
(a) Both A and R are true and R is the correct explanation of A.
(b) Both A and R are true but R is not the correct explanation of A.
41. The bond dissociation energies of X2, Y2 and XY are in the ratio of 1 : 0.5 : 1. H for the
formation of XY is –200 kJ mol–1. The bond dissociation energy of X2 will be
(a) 200 kJ mol–1 (b) 100 kJ mol–1 (c) 800 kJ mol–1 (d) 400 kJ mol–1
42. The pressure-volume work for an ideal gas can be calculated by using the expression
Vf
W Pext d .v . The work can also be calculated from the PV-Plot by using the area under the
Vi
curve within the specified limits. When an ideal gas is compressed (a) reversibly or (b)
irreversibly from volume Vi to Vf, choose the correct option.
(a) W(reversible) = W(irreversible)
(b) W(reversible) < W(irreversible)
(c) W(reversible) > W(irreversible)
(d) Wreversible = Wirreversible + Pext ΔV
43. Match:
Column 1 Column 2
(A) Endothermic (p) ΔH = 0, ΔE = 0
(B) Spontaneous (q) ΔG = 0
(C) Cyclic Process (r) ΔH is positive
(D) Equilibrium (s) ΔG is negative
(a) A → q, B → r, C → p, D → s (b) A → s, B → p, C → r, D → q
(c) A → p, B → q, C → s, D → r (d) A → r, B → s, C → p, D → q
44. Match :
C
Column 1 (gas) Column 2 p
Cv
(A) Ammonia (p) 1.20
(B) Carbon dioxide (q) 1.30
(C) Carbon monoxide (r) 1.40
(D) Helium (s) 1.66
(a) A → s, B → r, C → q, D → p (b) A → p, B → q, C → r, D → s
(c) A → s, B → q, C → r, D → p (d) A → r, B → s, C → q, D → p
45. Read the following statements carefully and choose correct option.
(i) In case of diatomic molecules, the enthalpy of atomisation is also the bond dissociation
enthalpy.
(ii) In case of polyatomic molecules, bond dissociation enthalpies are different for different
bonds within the same molecule.
(a) Both (i) and (ii) are correct.
(b) (i) is correct but (ii) is incorrect.
(c) (ii) is correct but (i) is incorrect.
(d) Both (i) and (ii) are incorrect.
INTEGER TYPE
46. A spherical balloon of radius 3 cm containing helium gas has a pressure of 48 × 10–3 bar. At the
same temperature, the pressure, of a spherical balloon of radius 12 cm containing the same
amount of gas will be ______ × 10–6 bar.
47. A mixture of one mole each of H2, He and O2 each are enclosed in a cylinder of volume V at
temperature T. If the partial pressure of H2 is 2 atm, the total pressure of the gases in the cylinder
is_______ atm.
48. Assuming ideal gas behaviour, the ratio of density of ammonia to that of hydrogen chloride at
same temperature and pressure is________. (Atomic wt. of Cl = 35.5u)
49. At constant volume, 4 mol of an ideal gas when heated from 300 K to 500 K changes its internal
energy by 5000 J. The molar heat capacity at constant volume is ________.
50. A process has DH = 200 J mol–1 and DS = 40 JK–1mol–1. Out of the values given below,
choose the minimum temperature above which the process will be spontaneous is_______ K.
MATHS
cos100 sin100
51. is equal to
cos100 sin100
(a) tan 55° (b) cot 55° (c) – tan 35° (d) – cot 35°
b ab a b
52. If tan x then is equal to
a a b ab
2sin x 2 cos x 2 cos x 2sin x
(a) (b) (c) (d)
sin 2 x cos 2 x sin 2 x cos 2 x
2sin cos
53. If x, then is equal to
1 cos sin 1 sin
(a) 1/x (b) x (c) 1 + x (d) 1 – x
x y
54. If sin x + cos y = a and cos x + sin y = b, then tan is equal to
2
ab a b
(a) a + b (b) a – b (c) (d)
a b ab
tan 3 cot 3
55. If sin 2 = k, then the value of is equal to
1 tan 2 1 cot 2
1 k 2 2 k2
(a) (b) (c) k2 + 1 (d) 2 – k2
k k
sin A 3 cos A 5
56. If and , 0 < A, B < /2, then tan A + tan B is equal to
sin B 2 cos B 2
(a) 3 / 5 (b) 5 / 3 (c) 1 (d) 3 5 / 5
cos x cos sin 2 cos
57. If then cos x is equal to
cos x cos sin 2 cos
cos cos cos cos cos cos
(a) (b) (c) (d) none of these
1 cos cos 1 cos cos 1 cos cos
3sin 2
58. If 1, then the value of tan is equal to
5 4 cos 2
(a) 1 (b) 1/3 (c) 3 (d) none of these
2 2
59. If A and B be acute positive angles satisfying 3 sin A + 2 sin B = 1, 3 sin 2A – 2 sin 2B = 0,
then
(a) B = /4 – A/2 (b) A = /4 – 2B (c) B = /2 – A/4 (d) A = /4 – B/2
x cos A x tan A y tan B
60. If then
y cos B x y
sin A cos B sin A sin B A B A B
(a) (b) (c) tan (d) cos
cos A sin B cos A cos B 2 2
61. (1 + cos (/8)) (1 + cos (3/8)) (1 + cos (5/8)) (1 + cos (7/8)) =
(a) 1/2 (b) cos (/8) (c) 1/8 (d) (1 + 2 ) / 2 2
62. If 2 cos x + 2 cos 3x = cos y, 2 sin x + 2 sin 3x = sin y then the value of cos 2x is
(a) – 7/8 (b) 1/8 (c) – 1/8 (d) 7/8
63. Which of the following gives the least value of A?
(a) cos 2A = sin 3A (b) cos 3A = sin 7A (c) tan A = cot 3A (d) cot A = tan 2A
sin 2 2 x 4sin 4 x 4sin 2 x cos 2 x 1
64. The least positive value of x satisfying is
4 sin 2 2 x 4sin 2 x 9
(a) /3 (b) /6 (c) 2/3 (d) 5/6
65. cos 22 + cos 78 + cos 800 =
0 0
(a) 4 sin 110 sin 390 sin 400 (b) 1 + 4 cos 110 cos 390 cos 400
(c) 1 + 4 sin 110 sin 390 sin 400 (d) 4 cos 110 cos 390 cos 400
1 x 1 x 1 x
66. tan x tan tan 2 ........ n 1 tan n 1 is equal to
2 2 22 2 2 2
1 x 1 x
(a) cot n 2cot 2 x (b) n 1
cot n 1 2cot 2 x
2
n
2 2 2
2n 1 1 x
(c) tan x (d) 2cot 2 x n 1
cot n 1
2n 1 2 2
3 cot 760 cot160
67. The value of is
cot 760 cot160
(a) cot 44° (b) cot 46° (c) tan 2° (d) cot 92°
tan A cot A
68. The expression can be written as
1 cot A 1 tan A
(a) sec A cosec A + 1 (b) tan A + cot A (c) sec A + cosec A (d) sin A cos A + 1
69. If 2 cos + sin = 1, ( /2), then 7 cos + 6 sin is equal to:
(a) 1/2 (b) 2 (c) 11/2 (d) 46/5
70. Let 0 < , /4. If cos ( + ) = 4/5 and sin ( – ) = 5/13 then the value of tan 2 is:
(a) 19/12 (b) 56/33 (c) 20/7 (d) 25/16
INTEGER TYPE
71. If x + y = z, then cos2 x + cos2 y + cos2z –2 cos x cos y cos z is equal to ________.
72. If sin2 A = x, then sin A sin 2A sin 3A sin 4A is a polynomial in x, the sum of whose coefficients is
________.
73. If sin4 x + cos4 y + 2 = 4 sin x cos y, 0 x, y /2 then sin x + cos y = ________.
3 5 7
74. The value of cos4 cos 4 cos 4 cos4 is ________.
8 8 8 8
75. tan 9° – tan 27° – tan 63° + tan 81° is equal to ________.
************