Professional Documents
Culture Documents
Fluid Additive
Fluid Additive
1
polyacrylamide.
There are many kinds of silicone softener thickener, except for considering the product's
fluidity,
transparency,
consistency,
gel and aerosols,
attention should also be paid to water-soluble compounds, which is used less but good thickening effect. And also the water
soluble compound is compatible with the principal component and does not produce phase separation, and stores no mildew or
segregation.
Contact Us
[Brief information]
2
-- This product is associated type polyacrylic acid, with thickening, stable foam, chelate, emulsion, dispersion etc. performance,
Suitable for detergent, shower gel, shampoo, liquid soap and laundry detergent (soap base system except) etc products.
[General properties]
-- Appearance (25 ℃) : yellow transparent to muddy thick liquid
-- pH value: 2-4 (1% solution)
-- Viscosity: ≥1000(30℃,cp)
[Properties and fields of application]
-- High thickening, especially for sulfonic acid system thickening has specially good effect, to other formula system is also
effective. And with salt, 6501, CAB, amine oxide, etc has good collaborative thickening effect.
-- Strong dispersion ability can greatly reduce the formula low temperature jelly phenomenon.
-- Excellent emulsifying, suspended function, improve the oil phase stability.
-- Polymer structure has the stable bubble function.
-- With partial AES function, can greatly improve the system of salt dosage.
-- Used for bath gel system, obvious anti-skidding effect, can make antifreeze fiber drawing effect.
[Usage ]
-- This product is acid polymer, need alkali neutralization can achieve the best effect, and when excessive neutralization can be
used sulfonic acid or citric acid and adjust back.
-- Recommended dosage:1.5~4.0%
[ Packing and storage]
-- Packing: 50 or 125 and 200kg/polyethylene drum
-- Storage: 12 months in cool and dry place with sealed packing
The silicone thickener softener can increase the organic silicone emulsion viscosity, has sticky handfeeling.
[Main composition]
Polymer
[General properties]
Appearance: pale yellow translucent to transparent liquid
Ionicity: nonionic
3
pH: 6 – 7
Stability: can compatible with all kinds of ionicity material
[Product features]
1. This product is a high molecular polymer, used for silicone oil emulsion, thickening effect is obvious.
2. After the thickening has good stability, the same dilute no effect for silicone oil quality.
[Application]
Manufacturers according to their requirements of the viscosity, adding an appropriate amount of thickener to the silicone oil
emulsion, suggested usage is 0.5-1%. Stirring and join thickener to silicone oil emulsion, until transparent, to get the required
viscosity.
[Packaging and storage]
125 kg/polyethylene drum, seal save in a cool and dry place, quality guarantee period6 months.
[Notes]
The data contained in this literature are based on our current knowledge and experience. It is imperative that it be tested to
determine, to your satisfaction, whether it is suitable for your intended use and application. We shall not take any responsibility in
any situation for improper use.
[Shipment]
We can support LCL shipment and FCL shipment, for LCL shipment, we will pack the goods with wool pallet to save the
products during transportation.
[Sample supply]
If you need samples for testing, please feel free to contact us, we will recommend suitable products according to your
requirement.
Main ingredients
Polymer
Product character
Appearance: pale yellow translucent to transparent liquid
Ionicity: nonionic
Compatibility: cancompatible with all kinds of ionicity material
PH: 6-7
4
Characteristic
This product is a high molecular polymer, used for silicone oil emulsion, thickening effect is obvious.
After the thickening has good stability, the same dilute no effect for silicone oil quality.
Product Secification
Usage/Application Industrial
Packaging Size 50kg HDPE CARBAY
Color Clear To Milky
Packaging Type 50
Brand Abh Biochem
Country of Origin Made in India
Minimum Order Quantity 500 KGs
Product Description
We are offering Silicon Booster or Silicon oil thickning agent, very good satble in amino silicon softner ,after use 2-2.5% you will
5
Silicone Thickening Agent Compatible With Cationic / Anionic and Nonionic Auxiliary
CONTACT US
86-769-86290888
overseas@globalchemicalsintl.com
86-769-83392294
6
Silicone Thickening Agent Compatible With Cationic / Anionic and Nonionic Auxiliary
Properties
Field of Application
Application
Add suitable amount of CS to silicone emulsion according to the required viscosity ,suggested dosage 0.5~1%
Chemical Composition
Technical Specification
PH value: 6~7
Ionicity : nonionic
Shelf life: 6 months when store in cool, dry and shaded warehouse
TRANSPERENT THICKENER
Carbopol® (Carbomer)
By George Nikolopoulos, Regional Sales Manager
Admix has been mixing Carbopol, a polymer used as a thickener, suspending agent and stabilizer, for decades. Carbopol is utilized in a wide
variety of cosmetic and personal care products, pharmaceuticals and household cleaners. Most Carbopol polymers are high molecular weight
acrylic acid chains usually crosslinked, and are available as powders or liquids.
In the cosmetic industry, Carbopol is used as a thickener in lotions, creams and gels. It is also used to stabilize, suspend, and control the release
of pharmaceutical products. At low concentrations, suspensions flow easily with a slippery feel. At higher concentrations, high viscosity
varieties form gels that are pseudoplastic. At rest, the batch has a very high viscosity and resistance to flow. When shear force is applied by a
mixer or pump, the apparent high viscosity is reduced.
The typical powder is very light and fluffy, forming clouds of airborne dust if not handled carefully. It tends to float on water, requiring a good
vortex to wet out. Once wet, it swells quickly creating high viscosity. Different varieties produce varying viscosities, but most are used below
7
1% concentration. The crosslinked polymers are not actually water soluble, but swell into hydrated spheres that give the product its rheological
properties.
As with gums, Carbopol form fisheyes if not mixed correctly. The Rotosolver is a top entry high shear mixer that is widely used to disperse these
materials quickly, eliminating clumps without damaging the polymer with overshear.
Carbopol®* is a water soluble polymer, used as an emulsifying, stabilising, suspending, thickening in many industries and is also used as gelling
agent in hand sanitizer gels and other products. Carbopol is available in several different grades, which are widely used in manufacture of
cosmetics and toiletries, including gels, creams and lotions, detergents, and air fresheners. The gelling effect is activated in two stages, firstly the
dispersion and hydration of the Carbopol, and secondly “neutralizing” the solution by the addition of chemicals which increase the pH.
Neutralizing agents include triethanolamine (TEA), sodium hydroxide and potassium hydroxide.
Carbopol® Polymer Products
Since their creation as the first commercial carbomers over 50 years ago, Lubrizol’s Carbopol ® polymers have continued to be the highest quality
carbomers on the market. Utilized in pharmaceutical products as rheology modifiers, tablet binders, suspension stabilizers, extended release
polymers, mucoadhesive aids, and bioavailability enhancers, Carbopol polymers are well known for their versatility and ease of use as
pharmaceutical excipients. Products within the Carbopol polymer family are chemically similar in that they are all high molecular weight,
crosslinked polyacrylic acid polymers. However, these gel forming polymers differ by their chemical crosslinking and can be grouped into the
following categories.
Carbopol homopolymers: acrylic acid crosslinked with allyl sucrose or allyl pentaerythritol
Carbopol copolymers: acrylic acid and C10-C30 alkyl acrylate crosslinked with allyl pentaerythritol
Carbopol interpolymers: carbomer homopolymer or copolymer that contains a block copolymer of polyethylene glycol and a
long chain alkyl acid ester
We have made numerous enhancements to the Carbopol polymer family over time to help address regulatory demands, increase product
robustness, and improve product handling, including, when mixing or processing Carbopol, ease of polymer dispersion to cut down on
processing time. As part of these enhancements, our polyacrylic acid polymers are synthesized to meet the highest standards of safety.
“Traditional” carbomers are synthesized in benzene, a substance that is increasingly restricted for use in pharmaceutical excipient applications.
Our “toxicologically preferred” carbomers are synthesized in either ethyl acetate or a cosolvent mixture of ethyl acetate and cyclohexane, which
are the products we now recommend for all new drug development projects.
In addition to our traditional excipients, LLS Health has added newer innovations to the Carbopol family in recent years, such as:
Carbopol Ultrez polymers provide self-wetting capabilities for polymer dispersion that does not require mixing, enabling greater
ease of use in formulating and processing.
Carbopol 71G NF is the only granular carbomer available for direct compression formulations, providing increased versatility in
the manufacture of oral solid dose products
Carbopol ETD 2020 NF is designed to provide increased electrolyte tolerance in drug formulations.
8
Carbopol Polymer Polymerization Solvent Carbomer Product Type Viscosity, cP
(0.5 wt% at pH 7.5)
1
Cosolvent system made using cyclohexane and ethyl acetate
2
1.0 wt%
Carbopol homopolyers are polymers of acrylic acid crosslinked with allyl sucrose or allyl pentaerythritol
Carbopol copolymers are polymers of acrylic acid and C10-C30 alkyl acrylate crosslinked with allyl pentaerythritol
Carbopol interpolymers are a carbomer homopolymer or copolymer that contains a block copolymer of polyethylene glycol
and a long chain alkyl acid ester
Carbopol homopolymers: acrylic acid crosslinked with allyl sucrose or allyl pentaerythritol
Carbopol copolymers: acrylic acid and C10-C30 alkyl acrylate crosslinked with allyl pentaerythritol
Carbopol interpolymers: carbomer homopolymer or copolymer that contains a block copolymer of polyethylene glycol and a long
chain alkyl acid ester
There are many different Carbopol® grades available with various polymerization solvents and viscosities. All Carbopol® grades are suitable for
topical applications, while Carbopol 974P NF, Carbopol 971P NF, and Carbopol 71G NF are suitable for oral applications.
Carbopol Ultrez polymers provide self-wetting capabilities for polymer dispersion that does not require mixing, enabling greater ease of use in
formulating and processing
Carbopol 71G NF is the only granular carbomer available for direct compression formulations, providing increased versatility in the manufacture
of oral solid dose products.
Carbopol ETD 2020 NF is designed to provide increased electrolyte tolerance in drug formulations
Carbopol® Polymers
More information about Carbopol® Polymers
Features
Versatility
low usage level
Applications
9
Semisolids & gels
Solutions & suspensions
Topical drug delivery
Bioadhesive formulations
Clear gels
Hydroalcoholic gels
Lotions
Creams
Direct compression
Extended release oral solid doses
Oral drug delivery
Carbopol Polymer is a self-wetting, rheology modifier designed to be used as a thickener, suspending agent and stabilizer in cosmetic
manufacturing. Its unique structure allows it to rapidly expand when added to liquids and provides moderate-to-high viscosity in skin care
products. Carbopol polymer performs effectively across a broad pH range, making it a versatile ingredient for many applications.
Benefits: When used in shampoo and body wash formulations, Carbopol polymer helps to suspend and stabilize beads, microcapsules and
exfoliants for excellent product stability and visual appeal. It exhibits good clarity in gel formulations, along with providing a smooth,
aesthetically pleasing gel quality. In creams and lotions, it helps to create emulsions with a rich and creamy skin feel. It can be used with
confidence in systems where sparkling clarity is required and is ideally suited for use in formulations containing higher levels of oils, botanical
ingredients, or humectants.
Application: Carbopol polymer provides excellent performance in a wide range of products, including shampoos, lotions, creams, body washes,
hair and skin gels and bath gels.
10
Recommended Usage: We recommend that no more than 0.5% to 1.5% of this product to be added to any formulation.
How to use:
• Sprinkle polymer on surface of water and allow to self-wet (vigorous agitation produces foam).
• Gently begin agitation.
• Carbopol polymer can be pre- or post-neutralized (depending on application).
• Keep agitation to a minimum (to avoid air entrapment) while adding remaining ingredients to formulation.
• Add typical preservatives.
Storage: This product should be stored in a cool dry location away from moisture. It is recommended that the product be re-tested after two
years for moisture content. Carbopol polymers are stable for years when protected from moisture.
11