Professional Documents
Culture Documents
COP 0004-1 Stripe Coating - March 2000
COP 0004-1 Stripe Coating - March 2000
COP 0004-1 Stripe Coating - March 2000
The areas mentioned in this Code of Practice are areas “low areas” where corrosion problems can occur and
often showing corrosion problems after the containers where stripe coating is recommendable.
have been in service. By introducing stripe coating at the The reason for carrying out stripe coating is to ensure ad-
new building stage, the corrosion problems can be reduced equate paint film thickness, and there by corrosion protec-
considerably. tion, in areas where paint application by spray is difficult.
The extend of stripe coating is depending on the container It is recommended that the stripe coating is carried out
factories paint facilities and the experience of the paint- with a brush. Application by brush ensures good penetra-
ers. This Code of Practice is meant as a guide to possible tion of the paint into the steel sur face
Interior - J-bar area. Interior - Corner posts and upper and lower lashing rings.
Interior - Corner casting and corner posts. Base - Cross members - welding seams.
Code of Practice 1
Exterior - Door corrugation and hinges Exterior - Upper and lower cams.
Fremantle
1 Garston Way
Hamilton Hill W.A. 6163
Tel: (08) 9431 7377
Fax: (08) 9431 7388
Brisbane
Unit 4, 54 Riverside Place
Morningside QLD 4170
Tel: (07) 3217 9066
Fax: (07) 3217 9077
Sydney
14 Winbourne Road
Brookvale NSW 2100
Tel: (02) 9905 5941
Fax: (02) 9905 5398
Code of Practice 2