Professional Documents
Culture Documents
357 - Ges-Cvs-01 en (2021-05)
357 - Ges-Cvs-01 en (2021-05)
GES-
Civil design - Structural
CVS-01
Steel Structure
Page 1 of 4
Bauplanung - Struktur; Stahlstruktur Supersedes: ES 09BA-ST-01 (2008-09)
ESD 09 BA-ST-01 (2007-01)
UN 4000-01 Part 1 (1997-02)
UN 4001-01 (2006-09)
UN 4001-02 Part 1-3 (2006-09
UN 4001-03 (2006-09)
UN 4001-04 (2006-09)
1 Scope
This General Engineering Specification (GES), agreed within thyssenkrupp Industrial Solutions, applies to the
design and construction of industrial and chemical plants. It contains minimum requirements for the design of
steel structures.
This document is only valid in conjunction with document CSA Design Criteria (GES-CVC-01), the referred
standard drawings as per table 2 and the codes and standards as per table 3.
2 Units
Table 1. Units
General SI-units
Dimensions mm
Temperature °C
Reference standards
Company standards:
GES-CVC-01 : 2021-03 Civil design - Civil; Design Criteria
UN 8280-3 : 2010-09 Civil design; Civil engineering; Preparation of documents
Other standards:
DIN 976-1 : 2016-09 Fasteners - Stud bolts - Part 1: Metric thread
DIN 7989-1 : 2001-04 Washers for steel structures - Part 1: Product grade C
ISO 68-1 :1998-12 ISO general purpose screw threads - Basic profile - Part 1: Metric screw threads
ISO 261 :1 998-12 ISO general purpose metric screw threads - General plan
EN 1090-2 : 2018-06 Execution of steel structures and aluminum structures - Part 2: Technical
requirements for steel structures
EN 10025-2 : 2019-08 Hot rolled products of structural steels - Part 2: Technical delivery conditions for
non-alloy structural steels
EN 10056-1 : 2017-01 Structural steel equal and unequal leg angles - Part 1: Dimensions
EN 10058 : 2018-11 Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions
and tolerances on shape and dimensions
EN 10220 : 2002-12 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 14399-1 : 2015-02 High-strength structural bolting assemblies for preloading - Part 1: General
requirements
EN 14399-4 : 2015-02 High-strength structural bolting assemblies for preloading - Part 4: System HV -
Hexagon bolt and nut assemblies
EN 14399-6 : 2015-02 High-strength structural bolting assemblies for preloading - Part 6: Plain
chamfered washers
EN 15048-1 : 2016-07 Non-preloaded structural bolting assemblies - Part 1: General requirements
EN ISO 898-1 : (2013-01) Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1:
Bolts, screws and studs with specified property classes - Coarse thread and fine
pitch thread (ISO 898-1:2013)
EN ISO 4014 : 2011-03 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN ISO 4016 : 2011-03 Hexagon head bolts - Product grade C (ISO 4016:2011)
EN ISO 4017 : 2014-06 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
EN ISO 4018 : 2011-04 Hexagon head screws - Product grade C (ISO 4018:2011)
EN ISO 4032 : 2012-12 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
EN ISO 4034 : 2012-02 Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012)
EN ISO 7042 (2012-12) Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10
and 12 (ISO 7042:2012)
EN ISO 7090 (2000-06) Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
EN ISO 7091 (2000-06) Plain washers - Normal series - Product grade C (ISO 7091:2000)