Professional Documents
Culture Documents
TLS 100 Equipment
TLS 100 Equipment
Transient
Soil
Line Source
Portable Thermal Conductivity Meter for
Soil, Rock, Concrete, and Polymers. Rock
Concrete
Polymers
Thermtest.com
TPS -160 to 1000°C
Thermtest has been advancing the measurement of thermal conductivity, thermal diffusivity, and specific heat since 2005. With more than 2000 satisfied
customers worldwide, our unique combination of advanced thermal conductivity instrumentation for the laboratory, portable meters for the field, and
accessories enables us to provide ideal solutions to fit any material testing application and budget.
Featured Transient Line Source Capabilities
The TLS-100 is a portable meter used to measure thermal conductivity and • Follows international standards: ASTM D5334-14
and IEEE 442-2017
thermal resistivity of a variety of samples, including soil, rocks, concrete,
and polymers. Tests can be performed with the push of a button and results • Portable, Economical, and Accurate
displayed instantly. The second generation TLS-100 has many advancements,
• Easy to use
such as sensors which are auto-recognized, with corresponding testing
• Standard 100 mm / 150 mm sensor for soft materials
parameters automatically loaded.
• Optional 50 mm sensor for hard materials
The Transient Line Source (TLS) meter follows ASTM D5334-14 and IEEE
logarithm of time is used in the calculation of thermal conductivity (k). The Thermal Conductivity 0.1 to 5 W/m•K
higher the thermal conductivity of a sample, the lower the slope. For samples
Thermal Resistivity 0.2 to 10 m•K/W
of low thermal conductivity, the slope will be higher.
• K)
Temp Rise
a
/m Accuracy 5%
(W
k = thermal conductivity (W/m•K) w m •K)
Lo g h ( W / Temperature Range -40 to 100°C
q = heating power (W/m) H i
1
Portable . Economical . Accurate
Standard 100 mm Sensor Standard 50 mm Sensor
Each TLS-100 comes equipped with the The 50 mm sensor was designed for
standard 100 mm sensor for testing of testing hard samples, like rock and
soil, soft materials, polymers and easy to concrete. Drilling the required 4 mm
drill materials. The needle sensor is fully diameter x 50 mm hole in rigid samples
inserted into an isothermal sample and is easy with the provided masonry
a measurement is made with the push of drill bit. When testing hard samples,
a button. After 180 seconds, results are a thermal contact grease is used to
displayed for thermal conductivity and enhance contact between the sensor
thermal resistivity. Saved results can also and sample.
be exported to a computer, via convenient
utility software and USB connection.
2
Transient Line Source (TLS 100 mm and TLS 50 mm)
100 mm 50 mm
Materials Soils, Pastes, Powders, and Solids Materials Concrete, Rock, and Polymers
Reproducibility 2% Reproducibility 2%
Accuracy 5% Accuracy 5%
Minimum Sample Size 100 mm in length, 50 mm diameter Minimum Sample Size 50 mm in length, 50 mm diameter
thermtest.com/applications/tls100mm thermtest.com/applications/tls50mm
3
Transient Line Source (TLS 150 mm)
150 mm
Reproducibility 2%
Accuracy 5%
thermtest.com/applications/tls150mm
4
Transient Line Source (TLS 100 mm - vCp)
100 mm
Reproducibility 2%
Accuracy +/- 5%
thermtest.com/applications/tls100-vCp
5
info@thermtest.com info@thermtest.se
Thermtest.com europe@thermtest.com
Thermtest.com/europe
usa@thermtest.com
Thermtest.com/usa asia@thermtest.com
Thermtest.com/Asia
latam@thermtest.com
Thermtest.com/latinamerica
0307-002-4.0-00