Professional Documents
Culture Documents
Plaxis ToolsGuide in Burmese
Plaxis ToolsGuide in Burmese
Plaxis Guidelines
Stress ................................................................................................................................................ 6
Strain ................................................................................................................................................ 9
ref
kN
E50 = secant stiffness in standard drained triaxial test ( )
m2
ref N
Eoed = tangent stiffness for primary oedometer loading ( )
m2
ကိုစဉျားစာျားရမည်။ Simple stress-strain relationship ဖြစ်လ ာ Hooke’s law of linear, isotropic elasticity
ထညေ့် ွငျား် စဉျားစာျားလ ာ parameters ဖြစ်လ ာ Young’s modulus, E နင်ေ့ poison’s ratio တို ေ့ ည် Soil and
element, bedrock layers ကဲေ့ ိုလေ့ ာ အလဖြေအလနမ ျားတွင် Linear elasticity case မ ျားကို ံိုျားနင
ို ် ည်။
analysis လိုပ်ရာတွင် စဉျားစွာစဉျားစာျားလ ာ model ဖြစ် ည်။ ိုလို ည်မာ Layer တစ်လာြေ င်ျားစတွင်
တူညလ ာ Average stiffness ရ ည်ဟို ယူ ည်။ Constant stiffness ဟို ယူ တွက်ြေ က် ညေ့်အတွက်
ထိုဖပင်
ေ့ အထက်တွင် လြာ်ဖပ ညေ့် parameters (5) ြေိုအဖပင် Initial Soil Condition ည်လည်ျား Soil
deformation တွက်ထတ
ို ်ရာတွင် အလရျားပါ ည်။ ထလ
ို ေ့ ကာင်ေ့ မန်ကန် ငလ
်ေ့ တာ်လ ာ K0- values ည် initial
MC soil model ည် Analysis လိုပ်ရာတွငဖ် မန် န်ပပျား Simple First Analysis မ ျားတွင် အ ံိုျားဖပ နင
ို ် ည်။
က် ွယ်ြေ က်ကို လြာ်ဖပဖြေင်ျားပင်ဖြစ် ည်။ A perfectly-plastic model is a constitutive model with a fixed
yield surface, i.e a yield surface that is fully defined by model parameters and not affected by (plastic)
straining
Stress
Stress အာျား Cartesian coordinates တွင် လြာ်ဖပရလျှင်
တူည ည်။
ထိုဖပင်
ေ့ Terzaghi’s principle အရ Stresses in soil ကို နစ်ပိုငျား် ြေွဲနင
ို ် ည်။
Negative normal stress components အာျား pressure (or compression) အဖြစ် လြာ်ဖပနင
ို ် ည်။
အာျားဖြငလ
်ေ့ ြာ်ဖပ ည်။
x, y, z directions ံိုျားြေိုတွင် largest compressive principal stress အာျား σ1, the smallest compressive
principal stress အာျား σ3 ဟို လြာ်ဖပရလျှင် ဉပမာအာျားဖြင်ေ့ ပံို (4) ကို ကညေ့်ပါ။
Figure 4. Principle Axis of Stress
အာျားလြာ်ဖပရလျှင်
ဖြစ် ည်။
The equivalent shear stress အာျား triaxial stress states (σ2’= σ3’) တွင် q= 𝑞 = |𝜎1′ − 𝜎3′ | ,
တွငလ
် လ ာေ့ြေ နင
ို ် ည်။ ထလ
ို ေ့ ကာင်ေ့ ၎င်ျား isotropic effective stress မ principal effective stress
အာျားလြာ်ဖပရလျှင်
ဖြစ် ည်။
လပါင်ျားဖြေင်ျားပင်ဖြစ် ည်။
Volumetric strain တွင် compaction (+) ဖြစ်၍ dilatancy ည် (-) ဖြစ် ည်။
Elastoplastic modelling လိုပ်ရာတွင် strain အာျား plastic နင်ေ့ elastic နစ်ပိုငျား် ြေွဲလျှင်
ဟိုလြာ်ဖပနင
ို ် ည်။
Elastic Strain
Soil and rock material modelling တွင် effective stress rate နင်ေ့ strain rates တ၏
ို ေ့ က် ွယ်ြေ က်ကို
လြာ်ဖပ ည်။
𝜎 ′ = 𝑀𝜀′
အာျားအရို ျားရင်ျား ံိုျားလြာ်ဖပန ို င် ညေ့် Hooke’s law အရ stress-strain က် ွယ်ြေ က်အာျား လြာ်ဖပရလျှင်
Young’s modulus E နင်ေ့ အဖြောျား stiffness moduli က် ွယ်ြေ က်တင
ွ ်
G = shear modulus
K = bulk modulus
Eoed = oedometer modulus
Linear elastic model (MC model) တွင် G နင်ေ့ Eoed ည် auxiliary parameters မျှ ာဖြစ် ည်။ Linear
Elastic model ည် highly non-linear behavior ရ ညေ့် လဖမကကျားတည်လ ာက်ရာတွင် ငလ
်ေ့ တာ်မှု
မရနင
ို လ
် ပ။
principle အရ Total stress = effective stress + pore pressure ဖြစ် ည်။ ိုလေ့ ာ် လရ ည် မည် ညေ့် Shear
အနစ်ြေ ပ်ရလျှင် Drained or Undrained analysis ည် Soil types လပေါ်တွင် ာမူတည် ည်။ Soil
investigation မရလ ာ permeability (k) ကို ကညေ့်ပပျား High permeability ရလ ာ Sandy soil မ ျား ိုလျှင်
Drained Analysis လိုပ် င်ေ့ ည်။ Short Term behavior ထက် Long Term behavior ကို
စဉျားစာျား ငအ
်ေ့ ြေါတွင် Drained Analysis ကိုလိုပ် ည်။ Undrained Analysis အာျား Low Permeability ရလ ာ
အ ံိုျားဖပ ည်။
Drained / Undrained Analysis အာျား Soil Grain Distribution မလဲ အ ကမ်ျားြ ဉျား ံိုျားဖြတ် ည်။ Soil
Content တွင် Sand or Gravel percentage ည် 50% ထက်မ ာျားလနလျှင် Drained Analysis အလနဖြင်ေ့
စဉျားစာျား ည်။ Clay or silt percentage ည် 50% အထက်တွင် ရလျှင် Undrained Analysis ဟူ၍
flow တွင် အလဖြေြေံတွက်ထိုတ်လ ာ pore pressure ဖြစ် ည်။ excess pore pressure ည် material undrained
ဖြစ်လာ ည်။
တွင် ပထမ ံိုျားလတွွေ့ရ ညေ့် slope အာျား E0 အဖြစ် တ်မတ်၍ 50% strength တွငရ
် လ ာ secant modulus အာျား
E50 အလနဖြင်ေ့ တ်မတ် ည်။ Linear Elastic range ကကျားလျှင် အမန်ြတ်ရ ညေ့် E0 ကိုအ ံိုျားဖပ ည်။
Loading of soil အလဖြေအလနတွင် E50 ကိုအ ံိုျားဖပ ည်။ Tunneling နင်ေ့ excavations မ ာျားတွင် unloading
condition Eur ကိုအ ံိုျားဖပ ည်။ standard drained triaxial result တစ်ြေိုအာျား လအာက်တွငလ
် ြာ်ဖပထာျား ည်။
Figure 5. Definition of E0 and E50 for Standard Drained Triaxial Test Results
လဖမကကျားတွင် unloading modulus, Eur နင်ေ့ First Loading modulus E50 တို ေ့ ည် confining pressure
reloading တွငရ
် လ ာ stiffness ည်ပိုဖမင်ေ့ ည်။ Young’s modulus ဖြစ်လြာ်ဖပလ ာ soil stiffness ည်
အဖြစ်လရွ ျားြေ ယ်တွက်ြေ က် ညေ့်အြေါတွင် stiffness တန်ြိုျားအာျား stress level, stress path development နင်ေ့
ငလ
်ေ့ တာ်လ ာ တန်ြိုျားကို ာ တ်မတ် င်ေ့ ည်။
တန်ြိုျားအဖမငက
်ေ့ ို ာ ံိုျားရန် အ ကံဖပ ပါ ည်။
MC model အာျား gravity loading အလဖြေအလနတွင် အ ံိုျားဖပ ပါက Poisson’ ratio လရွ ျားြေ ယ်ဖြေင်ျား ည်
လွယ်ကူ ည်။ Gravity Loading ို ည် ΣMweight ည် zero မ one အထ တိုျားလာဖြေင်ျားဖြစ် ည်။ Gravity
Loading condition တွင် K0=σh/ σv ဖြစ်သည်။ Poisson’ ratio အာျား မ ာျားလ ာအာျားဖြငလ
်ေ့ ဖမကကျားတွင် 0.3 to
တွငအ
် ံိုျားဖပ နင
ို ် ည်။ Unloading conditions တွင် 0.15 to 0.25 ည် ပို ငလ
်ေ့ တာ် ည်။
Cohesion (c)
Cohesive strength (c=0) ည် cohesionless sands အဖြစ် plaxis တွင် run နင
ို ် ည်။ ိုလေ့ ာ်
ရှု ပ်လထွျားမှုမ ာျားနင်ေ့ အလတွွေ့အ ကံ မရလ ာ user မ ာျားအတွက် အနည်ျား ံိုျား c >0.2 kPa ကိုလရွ ျားြေ ယ် င်ေ့ ည်။
ထိုဖပင်
ေ့ incremental cohesion ကိုလဲ တ်မတ်နင
ို ် ည်။
Friction angle (φ)
Plaxis တွင် friction angle အာျား degree အာျားဖြင်ေ့ ထညေ့် ွငျား် ရမည်။ High friction angle ည် Dense
friction anble မ ာျားကို preliminary computation လိုပ်ရာတွင် လရာင် င်ေ့ ည်။ ထိုဖပင်
ေ့ friction angle ည်
(သိပ်သည်ားဆ) နှင် friction angle ဖပေါ်မူတည်သည်။ friction angle (30) ထက်ဖ နည်ားဖသ san ၏
ငလ
်ေ့ လ ာ်လ ာ လရွ ျားြေ ယ်မှုရရမည် ဖြစ် ည်။
• K0 ို ည်မာ လ ာက်လပ
ို ်လရျားလိုပ်ငန်ျားမ ာျား မစတင်မတွင် ရလ ာ လဖမကကျား၏
• MC model တွင် stiffness constant ဖြစ်လန ညေ့်အတွက် Plaxis တွင် Stiffness incremental
• Tension Cut off တွင် clay ကဲေ့ ို ေ့ material မ ျားတွင် Tension crack ည် develop
ဖြစ်နင
ို ် ည်။ Tension stress ည်လည်ျား Develop ဖြစ် ည်။ ထိုကဲေ့ ိုလေ့ ာ Soil type
Limit လပျားလပျားရမည်။
လဖမကကျား၏ Stress-strain ည် Linear behavior မဟိုတ်လပ။ Nonlinear behavior ဖြစ် ည်။ ထိုလေ့ ကာင်ေ့
Hardening Soil Model တွင် nonlinear behavior ကိုရရလစရန် stiffness အမ ျားမ ျားကို
Figure 7. Hyperbolic stress-strain in primary loading for a standard drained triaxial test
• Stiffness (3) ြေိုတွင် 1) Triaxial Loading Stiffness, E50. 2) Triaxial Unloading Stiffness, Eur
• Soil ၏ Initial slope တွင် ရ ညေ့် Stress-strain curve မ stiffness အာျား E0 ဟို တ်မတ် ည်။
• Stress strain failure point မလန၍ Soil strength 50% ရလ ာ secant modulus ကို E50
• E0 အာျား စဉားစ ားသည်အခါ material ည် Large Linear Elastic Range အတွငျား် မာတွင် E0 value
• Unloading problem တွင် Eur ကိုအ ံိုျားဖပ ည်။ (unloading cases လတွ ို ည်မာ excavation
• E50 နင်ေ့ Eur တို ေ့ ည် Confining pressure လပေါ်တွင် မူတည် ည်။ ထိုလေ့ ကာင်ေ့ confining pressure
• Very soft soil နင်ေ့ Very Stiff soils တွင် Eoed/ E50 ကဲေ့ အြေ
ို ေ့ ျားြေ ံိုျားနင
ို ် ည်။
• ထိုလေ့ ကာင်ေ့ Hardening soil model ည် stress လဖပာင်ျားလဲမှုလပေါ်လိုက်၍ Stiffness moduli အမ ျားမ ျား
တစ်ြေိုဖြစ် ည်။
• လ
ို ေ့ ာ် Soil creep model (or) stress relaxation model မ ာျားတင
ွ လ
် တာေ့ Hardening soil model အာျား
မ ံိုျား ငလ
်ေ့ ပ။
Process of Design Thinking
Geotechnical Design လိုပ်ရာတွင် လိုအပ်လ ာ Site Investigation လတွ ၊ design parameter
evaluation လတွကို လိုပ်လ ာင်ရပါမည်။ Soil test results အလနဖြင်ေ့ Field Investigation (or) Laboratory
Design လိုပ်ရာတွင် Ultimate Limit State နှင် Serviceability Limit state ကို စဉျားစာျား ည်။ Ultimate
ထညေ့် ွငျား် စဉျားစာျားဖြေင်ျားဖြစ် ည်။ Serviceability limit state တွင် Structure လတွ၏ Functioning ကိုထြေိုက်မှု
Geometry Model တွင် Points, lines and clusters မ ာျားပါ၀င် ည်။ ထဖပင်
ို ေ့ subsoil
တ်မတ်မမ
ှု ာျား၊ structural objects မ ာျား တ်မတ်ဖြေင်ျား၊ Construction stage တ်မတ်ဖြေင်ျား နင်ေ့ Loading
ကို တ်မတ်လပျားရမည်။
Cluster Element တစ်ြေိုြေ င်ျားစအာျား finite element အရ meshing လိုပ်ရာတွင် Triangle element
analyze လိုပ်နင
ို ် ည်။ 15 node elements ည် ပို၍ တက လ ာ Stress and failure loads ကို
တွက်ထိုတ်လပျားနင
ို ် ည်။ 6 node elements အာျားဖြင်ေ့ ဖမန်ဖမန်တွက်ထိုတ်လပျားနင
ို ် ည်။ Finite element
caluculation ဖပ လိုပ်လနစဉတွင် displacement ux and uy အာျား node ရလ ာ လနရာမ တွက်ြေ က်ယူ ည်။
ထိုလေ့ ကာင်ေ့ Load- displacement curves မ ာျား ထိုတ်ရာတွင် Nodes မ ာျားကို predefined လိုပ်လပျားရမည်
ဖြစ် ည်။
stress path မ ာျား ( ို)ေ့ stress-strain diagram မ ာျားထိုတ်ယူရန်အတွက်လည်ျား stress points မ ာျားအာျား pre-
General Tool bar တွင် file (အြွင်/သမ်ား/အသစ်) ၊ print ဖြင်ား Zoom in/out ၊ selection tool နင် undo
tool မ ှာား ါသည်။ ထဖိုို့ င် Program တစ်ြိုြ င်ားသိုို့ သွှာားရရှာက်ရသှာ calculation program/ go to out put
program/ go to curves program စသည် tools မ ှာားလွဲ ါ၀◌င်သည်။
References;
Plaxis Version8 material Models Manual
Plaxis Version 8 Tutorial Manual
Lecture Notes “ The Design Thinking for Ground Investigation & Geotechnical Analysis” of Engr Khine
Khine Oo