Pree
€
PITT
geeeee eens
a
rr
o
er
a4 fe)
Protecton
Linosol Chlorinated
Rubber HB Coating
Scope
Anigh build chlorinated rubber based top coat
designed tor application over appropriate
primers providing a coating system with
exceptional water impermeabilty, salt spray
resistance andalso excellent resistance to
acids, alkalis and most chemicals. This
coating does not support combustion.
Uses
The product is recommended {for use on
steelwork as well as concrete surfaces of
fertilizer and chemical industries, battery
rooms, pulp and paper plants, breweries,
marine and harbour installations,
Product Data
Type: Single pack
Composition : Plasticised chlororubber
medium suitably pigmented
Application : Brush, roller orairless spray
Recommended DFT: 50-60 microns
percoat
Corresponding WFT : 109-130 microns
percoat
Theoretical Spreading Rate : 7.7-9.2
‘Sq. Mtr./Lir
Drying Time
TOUCH : 30 minutes
HANDLE : 4 hours
HARD : Bhours
Overcoating Interval
Min: Overnight
Flash Point: Above 25°C
Colour: Lt, Grey & Dk. Grey
Packing: 20Ltrs
Thinner/Cleaner : Thinner853
Finish: Sheen
Storage Life: Upto twelve months as long as
the sealed containers are kept under coverin
a dry place under normal temperature
conditions
rc
Resistance Guide
Chemical Resistance
Exposures Splash Mild Fumes/
and spillage Outdoor
Resistance
Acids Very Good Excellent
Alkalis: Good Good
Solvent Fair Fair
Salt Very Good Very Good
Excellent
Water Excellent
‘Temperature Resistance
Continuous: 65°C.
Intermittent: 75°C
Weatherability: Very Good (Chalks)
Flexibility: Good
Abrasion Resistance: Good
Data Sheet No.026