Professional Documents
Culture Documents
Myungsung Medical College - Ass I 2022
Myungsung Medical College - Ass I 2022
Myungsung Medical College - Ass I 2022
PreMed-module 1- 2023
Work sheet 1
1. The measurements of two lengths give 23.3992cm and 1.601cm. Find their sum
and difference. What is the product of these numbers?
2. How much liters of liquid can a 200cm3 object displace when completely
immersed in it?
3. A diabetes patient takes 40ml of insulin per day. What is this volume in
mm3?
4. A chemist told a patient to take 20mg of tablet of medicine three times
7. Find the resultant of vectors, 𝐴 = 3 𝑢𝑛𝑖𝑡 and 𝐵 = 4 𝑢𝑛𝑖𝑡 when the angle in
between them is a) 00. b) 1800, c) 900 and d) 600.
8. A force of 180N makes 370 to the x – axis. Find its components in xy
plane.
9. Two forces of 80N and 100N acting at an angle of 600 with each other.
2 𝑘𝑔 8 𝑘𝑔 F
17. A constant push of 100N, applied at an angle of 370 to a 20kg block which
rests on a horizontal surface, gives the block a velocity of 5m/s in 4 seconds.
Find
i) the normal force.
ii) the acceleration.
iii) the frictional force
iv) the coefficient of friction. (take g = 10m/s2, sin370= 0.6 and
cos370=0.8)
100N
370
18. Determine the force that a 80kg object exerts on the floor of an elevator when
it
i) Ascends with constant velocity 2m/s.
ii) Ascends with constant acceleration of 2m/s2.
iii) Descends with constant acceleration of 2m/s2.
19. A small object of mass m is suspended from a string of length L. The object
revolves with constant speed v in a horizontal circle of radius r. find an
expression for v.
20. In the figure below, the mass of body A is 10kg and of body B is 15kg. A
continuous cord attached to a fixed surface passes over fixed pulley P 1 and under
moveable pulley P2. Find the tension T1 and T2, and the acceleration of each body.
Neglect friction and the weights of the pulleys and cords.
P1
T2 P2
T1
MB
MA
21. It is found that a force of 240N parallel to plane was required to move a 40kg
mass with constant velocity up an inclined plane of 300. Find the coefficient of
sliding friction (take: g = 10m/s2).
22. A 4kg block is pulled up an inclined plane a distance of 2m by a horizontal force
of 80N. The coefficient of sliding friction is 0.2 and the angle of inclination is 53 0.
Find
i) The work done by the 80N force.
ii) The work done by the gravitational force.
iii) The work done by the frictional force.
iv) The total work done by all the forces. (take: g = 10m/s2)
80N
530
23. A block of mass 5kg, sliding on top of a table with initial velocity 2m/s,
comes to rest in a distance of 4m. Find the average friction force that
decelerated its motion.
M=5kg
26. Two balls of equal mass, moving with speeds of 3m/s each on a level
ground collide head-on. Find the velocity of each ball after elastic collision, if 𝑣
⃗⃗⃗⃗1
and ⃗⃗⃗⃗
𝑣2 are their final velocities.
27.A net force of 40N east is applied on a 10-kg mass for 2 seconds to change its
velocity from 2m/s to a uniform velocity 𝑣 . Compute the momentum of the
object after 2 seconds.
28. A bullet of mass 200gm strikes a target of mass 1,100gm. If the bullet
and target move together immediately after impact with a velocity of 2m/s.
calculate the velocity of the bullet before impact.