Professional Documents
Culture Documents
High Mast
High Mast
6
Holophane high mast lighting systems Luminaires
provide superior benefits for lighting
large areas. The system has proven to
be reliable and dependable in severe
HMSC
environmental conditions. By incorporating
multiple luminaires per pole, fewer poles are
required to light an area, resulting in fewer
foundations and trenching. HMSD
|
HOLOPHANE® Outdoor Lighting INFRASTRUCTURE | High Mast Systems 7
HIGH MAST LIGHTING High Mast Systems
Versatility
Typical Applications
• Highways
• Interchanges
• Ports
• Rail Yards
• Container Yards
• Correctional Facilities
• Parking Areas
• Truck Stops
• Petrochemical Operations
• Treatment Plants
• Security Lighting
• Sports Lighting
Features
• Superior optical performance
• Increased safety
• Unitized electrical assembly
• Optimized light control
• Symmetric, asymmetric and long and
narrow distributions
• Less dirt depreciation
• Ground level maintenance
• Reduced installation and operating costs
• Mounting heights from 50' - 150'
Lamp Types
• 400-1000 watt metal halide
• 400-1000 high pressure sodium
Approvals
• UL/CUL
8
INFRASTRUCTURE
Product Catalog
Prisons.
Nighttime security, including TV surveillance and
protection of vital equipment, is enhanced by
the uniformity of vertical and horizontal lighting
provided by the HMS system. Easy maintenance
of the system assures that this protection will
not be interrupted.
|
HOLOPHANE® Outdoor Lighting INFRASTRUCTURE | High Mast Systems 9
HIGH MAST LIGHTING High Mast Systems
HMSC®
HMSD
10
HMSP
INFRASTRUCTURE
Product Catalog
HMST®
|
HOLOPHANE® Outdoor Lighting INFRASTRUCTURE | High Mast Systems 11
HIGH MAST LIGHTING High Mast Systems
Product Features
3
1 Ballast assembly is provided with
quick disconnects for fast installation or 2/4 1/7
removal. UL listing for 40°C ambients
provides extended ballast and capacitor
life. 8 9
2 Terminal block provides for positive
lead connection and is pre-wired to the 5
quick disconnect. 6
Weathertight design UL wet
3location listed. 9 Cutaway showing
sealed optical assembly
Adjustable slipfitter bracket entry
4is designed for 51mm (2") nominal pipe
and permits a vertical positioning 10 9spunSealed optical system consists of
on aluminum cover with high
adjustment of ±3°.
temperature silicone sealant at top and
5porLamp support is provided by a
celain-enclosed socket with nickel-
bottom. Hermetically seals reflecting
Die cast aluminum housing
7provides prisms from all contaminants.
plated lamp grip screw shell. 1000W a corrosion resistant enclosure
10 Refractor assembly consists of a
standard lamp versions are provided for ballast components. prismatic borosilicate glass refractor and
with a stainless steel lamp clamp.
Variety of lamp positions raises or
8 Weather shield permits air passage stainless steel clamping ring. Various
6lowers main optical beam to provide
for reflector self-cleaning. It also prevents refractor/reflector combinations provide
snow, ice or wind driven rain from the 35 different cutoff, semi-cutoff and
different fixture spacing ratios. entering the lamp/optical chamber. non-cutoff light distributions.
Specifications
The luminaire shall be Holophane Catalog No. The HMST optical assembly shall consist of an The HMSP optical assembly shall consist of an
_______________________. The fixture shall be open ventilated borosilicate glass reflector and open ventilated borosilicate glass reflector
UL/CUL Listed for wet locations in 40° C ambient refractor. The reflector glass shall be protected and producing a symmetric, asymmetric or long and
temperatures. sealed by a spun on aluminum cover. The exposed narrow distribution as specified. The reflecting
inner glass surface shall be smooth and continuously prisms shall be rear-surfaced metallized. The
The ballast and lamp housings shall be die cast of cleaned by the chimney effect of airflow through reflector glass shall be protected and sealed by a
low copper content aluminum alloy. The castings the reflector and not subject to permanent spun on aluminum cover. The exposed inner glass
shall be subjected to a 7-stage pretreatment cleaning deterioration. The lamp shall operate in the vertical surface shall be smooth and continuously cleaned
prior to being finished with an electrostatically position for maximum life and lumen maintenance. by the chimney effect of airflow through the
applied and baked on polyester powder coat paint. The refractor shall be held by a stainless steel band reflector and not subject to permanent deterioration.
The bracket arm clamp shall attach to a 51mm and shall produce symmetric, asymmetric or long The lamp shall operate in the vertical position for
(2”) nominal pipe and allow for +/-3° adjustment and narrow distributions as specified. The refractor maximum life and lumen maintenance.
for leveling the luminaire. A porcelain-enclosed shall be able to rotate for field aiming of the main Asymmetric and long and narrow reflectors shall
socket with a nickel-plated grip screw shell pro- beam distribution. be able to rotate for field aiming of the main
vides lamp support. A stainless steel lamp clamp beam distribution.
lined with woven glass cloth shall be provided for The HMSD optical assembly shall consist of an
standard 1000 watt HID lamps. The fixture shall open ventilated borosilicate glass reflector producing The HMSC optical assembly shall consist of
pass a vibration fatigue test simulating a minimum a symmetric distribution. The reflector glass shall formed aluminum reflectors with anodized finish.
1-g peak acceleration. be protected and sealed by a spun on aluminum The IES cutoff symmetric distribution reflectors are
cover. The exposed inner glass surface shall be spun and fluted. The IES cutoff asymmetric distri-
The ballast shall be copper wound with a power smooth and continuously cleaned by the chimney bution reflectors are hydro formed and housed in
factor over 90%. It shall have a published ballast effect of airflow through the reflector and not a spun aluminum cover. All optical systems are
factor of 1 to ensure full lamp output. All ballast subject to permanent deterioration. The lamp shall enclosed with a clear drop borosilicate glass lens in
components shall be completely removable as a operate in the vertical position for maximum life a gasketed doorframe. The doorframe includes
unitized assembly. All ballasts shall provide starting and lumen maintenance. Low brightness optics to four stainless steel latches and a hinge for
temperatures to -40°F. Quick disconnects and a reduce direct glare can be specified with an ELB re-lamping.
terminal block shall be provided to simplify wiring finish on the reflector cover.
and provide positive electrical connections. A Warranty
protected starter, if specified, shall sense an The electrical assembly shall be fully warranted for
inoperative or missing HPS lamp and automatically a period of 6 years and the housing for a period of
shut down to prevent damage to the ballast 2 years from the date of manufacture.
windings.
12
INFRASTRUCTURE
Product Catalog
HMSC HMSD
Asymmetric Symmetric Standard ELB option
HMSP HMST
Asymmetric Symmetric Asymmetric Symmetric
|
HOLOPHANE® Outdoor Lighting INFRASTRUCTURE | High Mast Systems 13
HIGH MAST LIGHTING High Mast Systems
14
Ordering Information
INFRASTRUCTURE
Product Catalog
How to Construct a Catalog Number
HMSC High Mast Cutoff Enclosed 400HP 400W HPS HMSC/HMSD/HMSP HMSC
HMSD High Mast Cutoff Open 40RHP1 400W HPS, mag reg 7 Low J1 Cylindrical Cover, Black
HMSP Prismetal 750HP1 750W HPS 81 Medium L1 Cylindrical Cover, Bronze
HMST High Mast C10HP 1000W HPS 9 High M 1 Square Cover, Black
CP1HP2 Compact 1000W HPS N 1 Square Cover, Bronze
400MH2 400W MH HMST
C10MH 1000W MH 72 Medium HMSD
622mm
(24.5") 83 Broad SD-292-90 90° Shield
1 Not available with “MT”
2 Not available with HMSC 93 Wide SD-292-120 120° Shield
0 Wide – Compact Lamps only SD-292-180 180° Shield
STEP 3: VOLTAGE 1 Broad – C10HP Lamp Only HMST
616mm
(24.25") 081 208V 1 Available with “C” optics only Cylindrical Cover, Black or Bronze
HMSC HMSTCYLBK With Acrylic Skirt
Maximum Weight: Maximum EPA: 1.56 12 120V 2 Not available with C10HP and C10MH
27 kg. (60 lbs.) Sq. Cover 4.35 20 208V 3 Not available with C10HP HMSTCYLLSBK Without Acrylic Skirt
Cyl. Cover 2.62 24 240V HMSTCYLBZ With Acrylic Skirt
27 277V HMSTCYLLSBZ Without Acrylic Skirt
575mm 34 347V STEP 6: OPTIONS Square Cover, Black or Bronze
(22.625") 401 240V HMSTSQRBK With Acrylic Skirt
48 480V R 1Photocontrol Receptacle (NEMA type)
MT2 Multi-voltage HMSTSQRLSBK Without Acrylic Skirt
PS2 Protected Starter for HPS HMSTSQRBZ With Acrylic Skirt
651mm 1 Isolated Secondary C/UL FD1 Single Fuse Disconnect Assembly for
3
(25.625") 2 For120/208/240/277V HMSTSQRLSBZ Without Acrylic Skirt
HMSD 120,240,277 and 347V Shields
Maximum Weight: Maximum EPA: 1.66 FD24 Double Fuse Disconnect Assembly for
36 kg. (79 lbs.) STEP 4: OPTICAL SD-79-90 2 90° Shield
208, 240 and 480V SD-79-120 2 120° Shield
HMSC
A1 Narrow Asymmetric 1 NA with “MT” SD-79-180 2 180° Shield
432mm B1 Wide Asymmetric 2 NA with 750W HPS SD-120-90 3 90° Shield
(17") 3 NA with 750HPS, 347V
C Symmetric SD-120-120 3 120° Shield
HMSD 4 C10HP and CP1HP handled through TSG only
SD-120-180 3 180° Shield
S Symmetric
B Symmetric, Extra Low Brightness STEP 7: ACCESSORIES HMSP
HMSP 457mm (18") S Optic Shields
584mm (23”) HMSP
Max. Weight: Max. EPA: A Wide Asymmetric (Ships separately) SD-313-90 90° Shield
“S” Optic 27 kg. (60 lbs.) 1.13 B Narrow Asymmetric F1 Single Fuse Assembly for 120, SD-313-120 120° Shield
“A”/”L” Optic 32 kg. (71 lbs.) 1.30
L Type I, Long and Narrow 240, 277 or 347V SD-313-180 180° Shield
S Type V, Square Symmetric F2 Double Fuse Assembly for 208, A and L Optic Shields
546mm
HMST 240 or 480V SD-337-120 120° Shield
(21.5") or A Asymmetric SD-314-180 180° Shield
622mm D2 Long and Narrow PS-100 Replacement Protected Starter
(24.5") E2 Asymmetric for 400RHP and 400HP 1 NA with “R” option
PS-1000 Replacement Protected Starter 2 HMST for 400, 750W HPS, 1000W Compact
F2 Symmetric HPS, 1000W MH with Symmetric and
L Long and Narrow for C10HP Asymmetric Optics
HMST 476mm
(18.75") S Symmetric Lamp Appropriate Lamp Installed 3 HMST for 1000W HPS and All Long and
Maximum Weight: Maximum EPA: 1.40 1 Available with 7 & 9 beam angle SD-115 Vertical Cutoff Shield X 360° Narrow and Asymmetric Units (NA with
30 kg. (67 lbs.) Sq. Cover 4.35 C10HP)
Cyl. Cover 2.62 2 For CP1HP compact lamp only Horizontal
|
HOLOPHANE® Outdoor Lighting INFRASTRUCTURE | High Mast Systems 15