Professional Documents
Culture Documents
Dual DC Regulated Power Supply
Dual DC Regulated Power Supply
Dual DC Regulated Power Supply
Digital Power Supplies has been designed and manufactured as per exact engineering standards using best quality
components, offering overload/short circuit protection.
Different controls for voltage and current controls
Fine and coarse controls for variation
Line Regulation is 0 .01%. +10% Line variation
& load regulation is 0.05% from no load to full
load
Our 3½ digit Digital Panel Meters are
Compact panel meters for digital display of
electrical quantities.
The output is short circuit protected with
crossbar electronics fold back current limiting
circuit.
Applications:
These power supplies are very useful for R&D
laboratories, control panel manufacturers, defense
Establishment’s school & college laboratories.
Technical specifications:
Output Voltage Output Current Meters
0-30V, 3A, 0-(-30V), 3A 4 DPM (3½ digit)
Output voltage:
0-30V AND 0-(-30V)+1% continuously adjustable
Output current:
0-3A AND 0-3A+1% continuously adjustable
Features
1. Trainer operated on 230V, 50 Hz + 10%
2. Supplied with instruction manual
3. Highly Short Circuit Proof.
4. With Digital Readout.
DIMMER STAT 3A
Features
1. Trainer operated on 230V, 50 Hz + 10%
2. ON/OFF Controlled
3. Highly Short Circuit Protection with fuse.
4. Load Current 3A.
5. Output brought out to 6A Terminal and Home Appliances
Sockets.
Digital Power Supplies has been designed and manufactured as per exact engineering standards using best quality
components, offering overload/short circuit protection.
Different controls for voltage and current controls
Fine and coarse controls for variation
Line Regulation is 0 .01%. +10% Line variation
& load regulation is 0.05% from no load to full load
Our 3½ digit Digital Panel Meters are
Compact panel meters for digital display of electrical
quantities.
The output is short circuit protected with crossbar
electronics fold back current limiting circuit.
Applications:
These power supplies are very useful for R&D laboratories, control
panel manufacturers, defenseEstablishment’s school & college
laboratories.
Technical specifications:
Output Voltage Output Current Meters
0-24V, 1A 2 Meters
Output voltage:
0-24V +1% continuously adjustable
Output current:
0-1A +1% continuously adjustable
Features
Trainer operated on 230V, 50 Hz + 10%
Supplied with instruction manual
Highly Short Circuit Proof.
BATTERY CHARGER
Specification:
Trainer comprises of
Power supplies inside the trainer
Power supplies on boards 0-12V, 250 mA and 0-5V,250mA Variable
+12V/150mA and +5V/150mA Fixed Supplies provided on board.
On board bread board provided
Ac power supply 15-0-15V for rectifier applications
Specifications:
850 points bread board 1nos.
Power supply +5V, 500mA is available in the trainer to use
various TTL & CMOS ICs.
On board pulsar circuit to provide the mono-pulse to the digital circuits.
On board clock circuit to provide the low frequency clock to the digital circuits.
8 digital input logic high low switch.
8 digital output indicators.
20 pin zip sockets to place the various ICs and easily perform of the experiments with single chip integrated
circuits.
One 4 bit BCD To 7 Segment indicator to show decimal digit directly in case of counters.
2 mm sockets to make connections via 2mm patch cords.
Features
Trainer operated on 230V, 50 Hz + 10%
Supplied with instruction manual
Supplied with sufficient nos. of patch cords
Supplied with Computer Lead
Dimensions of the Trainer will be 12’’x10’’ with Plastic Box Highly shock proof .
TECHNICAL SPECIFICATIONS
DC Power Supply on Board:
: 0-15V at 150Ma
: 0-30V at 150mA
AC Power Supply on Board : 9V - 0V - 9V at 150mA
UJT Triggering Circuit using SCR (1 Channel) on
Board
R,RC Triggering Circuit On board.
SCR Control Circuit provided on board for UJT Firing circuit.
Power Devices : MOSFET-IRF540, UJT-2N2646, DIAC-DB3, TRIAC-BT136, SCR-TYN604.
Circuit Components On Board: 2 Nos. Capacitor
Load Resistance 100E, 220E, 500E, 1K, 2K2, each 5W
Resistance on Board 3 Nos.
Resistance on Board: 1Variable Resistor 1K,1W
Power Requirements: 220V ±10%, 50Hz
Following Experiment can be easily performed on the trainer. Use external multimeter to read current and voltages.
Specification:
Trainer comprises of Power supplies inside the trainer
Power supplies on boards 0-12V, 250 mA and 0-5V,250mA Variable
+12V/150mA and +5V/150mA Fixed Supplies provided on board.
3 Nos of Variable resistor provided on the board.
Ac power supply 15-0-15V for rectifier applications
Technical Specification:
The Instrument comprises of the Following
built in Parts:-
Two Nos of 741 Op-Amp given on board.
One 555 IC Given on board.
Two continuously variable DC regulated
power supplies of , 0-5V and 0-12V Dc,
Two Controls Switches mounted on the
panel or a Digital panel voltmeter in place of
switches.
One fixed voltage DC Regulated power
supplies +15V is on Board for internal op-
amp biasing.
One Variable Resistor (Potentiometer)
having 10K value is mounted on the board.
N number of Resistances and Capacitors are on board for the required operations to be performed.
4 Diode 1N4007, 2 numbers of 1N4148, 2 LED and 2 numbers of Zener Diode having value of 3.3V and 5.1V are
mounted on the board.
Operated on 230V, 50Hz power supply +10%
Packing list
Instruction manual
Patch cords
DIGITAL IC TRAINER
The Digital IC Trainer is intended for elementary as well as advance training of digital electronics. The trainer
covers regular digital circuits by solder less inter connections through use of 2 mm brass terminations and patch
cords. Various clock generators, logic level input / output indicators and DC regulated power supply are in built.
The unit housed in sun mica finished wooden box enclosure with provision for safe keeping of mains cord, patch
cords and top lid for protection during storage.
Feature:
DC Power Supply: 5 V ± 0.25V / 500 mA (IC based regulated
output).
Clock Generators: i) Fixed: a. 0.1Hz b. 1Hz. (Simultaneous
independent outputs).
(TTL, 5V) : ii) Variable: One low frequency variable clock
generator.
Manual Pulser : One independent bounce less manual Pulser ( useful for freezing the action of each stage of the
counter after every clock pulse ).
Logic Level Inputs : Eight independent logic level inputs to select High / Low TTL levels, each with a LED to
indicate high / low status and termination.
Logic Level : Eight independent buffered logic level indicators for High / Low status
Indicators : indication of digital outputs.
Seven segment decoder : One BCD to Seven Segment Decoder/ Driver IC with terminations.
Logic Probe given on board.
All logic gate operation given onboard with multi operations.
ZIF socket : IC’s up to 20 pin Universal ZIF Socket ( without soldering)
Power On : Power ON switch with indicator for mains on indication and fuse for protection.
Patch Cords : Adequate no of assorted colored multi-stand wires with 2mm stackable plug termination at both
ends.( Stackable )
Power Requirement : 230V + 10% single phase AC.
Instruction manual : One detailed instruction manual with well thought out experiments covering the above
topics
Technical Specification:
The Instrument comprises of the Following
built in Parts:-
Two Nos of 741 Op-Amp given on board.
One 555 IC Given on board.
Two continuously variable DC regulated
power supplies of , 0-5V and 0-12V Dc,
Two Controls Switches mounted on the
panel or a Digital panel voltmeter in place of
switches.
One fixed voltage DC Regulated power
supplies +15V is on Board for internal op-
amp biasing.
One Variable Resistor (Potentiometer)
having 10K value is mounted on the board.
N number of Resistances and Capacitors are on board for the required operations to be performed.
4 Diode 1N4007, 2 numbers of 1N4148, 2 LED and 2 numbers of Zener Diode having value of 3.3V and 5.1V are
mounted on the board.
Operated on 230V, 50Hz power supply +10%
Packing list
Instruction manual
Patch cords
FREQUENCY MODULATION AND DEMODULATION TRAINER
Specifications:
AF Signal generator 5 KHz
Carrier generator 200 KHz
Frequency modulator
Frequency demodulator
Power Supply ±12 V/250 mA
Features
Trainer operated on 230V, 50 Hz + 10%
Supplied with instruction manual
Supplied with sufficient nos. of patch cords
Supplied with Computer Lead
Dimensions of the Trainer will be 12’’x8’’ with Plastic Box Highly
shock proof .
Features
Trainer operated on 230V, 50 Hz + 10%
Supplied with instruction manual
Supplied with sufficient nos. of patch cords
Supplied with Computer Lead
Dimensions of the Trainer will be 12’’x8’’ with Plastic Box Highly
shock proof .
Features
Trainer operated on 230V, 50 Hz + 10%
Supplied with instruction manual
Supplied with sufficient nos. of patch cords
Supplied with Computer Lead
Dimensions of the Trainer will be 12’’x8’’ with Plastic Box
Highly shock proof .
PULSE WIDTH MODULATION TRAINER
Specifications
Features
Trainer operated on 230V, 50 Hz + 10%
Supplied with instruction manual
Supplied with sufficient nos. of patch cords
Supplied with Computer Lead
Dimensions of the Trainer will be 12’’x8’’ with
Plastic Box Highly shock proof .
PAM-PPM-PWM TRAINER
FEATURES:
PWM modulator
PAM Modulator
PPM Modulator
PWM Demodulator
PAM Demodulator
PPM Demodulator
Power Supply ±12V and +5V/ 500 mA
Instrument Fitted in Highly Shockproof Plastics Box.
Instrument Dimensions: 16’’X10’’
ACCESSORIES:
Sufficient no of 4mm Patch Cords for Interconnection
Instruction Manual for Student Workbook.
Power Cords 230v, 50Hz
1. 8051 microcontroller
With 4 Input ports
2. Inbuilt 3 power
supplies +5V/1A,
+12V-500mA, -12V-
500mA
3. Serial programming
through ISP Interface
(max232)
4. Display (LCD) section
16X2
5. Display LED 8 bit with
latching output.
6. Multiplexed 4 seven segment display
7. Input switches push button 4 Bit section
8. One Reset push button
9. 2 channel (isolated with op-to coupler) Relay interface section
10.Buzzer section
PERIPHERALS
PART NO. SPECIFICATIONS
BUZZER 5V
RELAY 12V,6A
POWER SUPPLIES PROVIDED INTERNALLY
Voltage Rating Current Rating
+5V 1A
Objective:
1. Voice transmission through optical fiber cable.
2. To study transmitter circuit & calculate its output power
3. To study receiver circuit & calculate its input power
4. To study the attenuation of signal between
transmitter & receiver end.
5. Measurement of numerical aperture
Specifications:
In built IC based Fixed DC Regulated Power
Supply + 6VDC/100mA.
Pre amplifier stage consists of MIC
(Microphone).
Photo detectors, transistors,& biasing network of resistance & capacitors.
Power Amplifier stages consist of impedance matching transformers, transistors & biasing network of resistance
& capacitors.
Output section having LED & speaker, fiber optic cable for transmission of signal.
Circuit diagram is printed on glass epoxy PCB & different combination of resistance.
Test point are brought out on front panel .
Accessories:
1. Adequate no of 4mm Patch Cords required for the Experiments.
2. Microphone for Voice Transmission.
3. Speaker for Voice Receiver End.
4. Optical Fiber Cable 1 Meter Length.
SENSOR TRAINER
Objective:
1.Strain Gauge Measurement
2 Load cell Measurement.
3. LVDT Measurement
4. Smoke Sensor
5. RTD Sensor
6. Thermocouple Sensor.
7. Speed Measurement of Motor By Proximity Sensor.
SPPED SENSOR SPECIFICATIONS
3. THERMOCOUPLE SPECIFICATION :
Study of THERMOCOUPLE as temperature measuring transducer
THERMOCOUPLE probe with protection cover
3.5 digit DPM as temperature indicator
Bridge circuit for transducer
Differential amplifier with feedback
Lead compensation system
O/P provided on test points for monitoring & controlling.
4. RTD SPECIFICATION :
Study of RTD as temperature measuring transducer
RTD ( PT - 100 ) probe with protection cover
3.5 digit DPM as temperature indicator
Bridge circuit for transducer
Differential amplifier with feedback
Lead compensation system
O/P provided on test points for monitoring & controlling.
WHEATSTONE BRIDGE:
Experimental Training Board has been designed specifically for the study of Wheatstone Bridge.
Using this bridge the value of unknown resistor can be found. The board is absolutely self
contained and requires no other apparatus.
Practical experience on this board carries great educative value for science and engineering
students.
Object:
01. To study Wheatstone Bridge
02. To measure value of unknown
resistance.
Features:
The board consists of the following
built in parts:
01. +5V D.C. At 100mA IC regulated
power supply internally connected.
02. Galvanometer, ANALOG to read
30-0-30.
03. Six decade resistance of
different range.
04. Adequate. no. of other
electronic components.
05. Mains ON/OFF switch, Fuse and
Jewel Light.
* The unit is operative on 230V ±10% at 50Hz A.C. Mains.
* Adequate no. of patch cords stackable from rear both ends 4mm spring loaded plug length ½
metre.
* Good Quality, reliable terminal/sockets are provided at appropriate places on panel for
connections/ observation of waveforms.
WHEATSTONE BRIDGE TRAINER
Specifications:
1. On board dacade resistance box given.
2. On board fractional resistance box given.
3. Connection for external battery given.
4. On board galvanometer given.
5. Unknown resistance given.
6. All connectional given internally.
7. 2 Press key given.
8. Intrument comprises 12x8 size box.
9. Supplied with instruction manual.
10.
Electronics workbench
Electrical electronics Work Bench is specially designed keeping in mind the actual need for Training & use with proper
Instrument panel and sufficient working area. The Work Bench is made of M.S. Powder coated mild steel with Laminated
Wood based top on the working area.
Dimensions:
Electrical Fittings:
Wiring panel at the back above the table top height with 6 separate Modular sets of 5 Amp Switch & 5 pin Child proof
protective Socket are provided on the panel
1 set of 4 Pole MCB (32A) for 3 Φ ON / OFF for the whole table and Hi Bright
R,Y,B phase indicators & 15A fuse for each phase are provided on the panel
[ Note : Photo for Illustration Purpose Only Actual Bench may be different but as per the Specifications ]
Supplied instruments
Features
1Ph. induction motor 220V, 1500 RPM and
1/4 Hp Crompton Greaves make.
Motor generator set is copper wound with
class b insulation.
It is supplied with one MS powder coated
Electrical panel fitted with high insulation
Bakelite sheet.
Bakelite sheet thickness is 6mm
Digital ammeter and Digital voltmeter are
provided on the front panel sheet.
DOL starter of 1hp rating mounted on the
panel with the connections of 1 phase motor.
On Board AC Power Supply 0-230V, 2A.
On Board Single Phase over Current Relay.
On Board Single Phase Over Voltage Relay and Under Voltage Relay (Combined).
On Board 1 Phase Contactor.
Short Circuit protection with the MCB.
4mm terminals to make connections
Sufficient nos. of patch cords for easy connections.
All parts on front panels are properly labeled.
Supplied with complete operating instruction manual
All connections and circuits are properly labels for easily understanding.
Experiment consist of
Electrical panel size24”X24” SIZE
4 mm Connection leads required nos.
Operating voltage 230V, 50HZ line.
Laboratory experimental manual