Professional Documents
Culture Documents
备电48200使用说明书 1 14 translate
备电48200使用说明书 1 14 translate
1
1 Adaptation range................................................................................. 3
2 Product function................................................................................. 3
3 Product parameters............................................................................. 3
4 Operating instructions..................................................................... 4
8. Transportation considerations................................................... 12
9 Storage................................................................................................. 13
2
For you to use, store and maintain our battery pack
.4The 2- - - - - -L E D is shown
3
Standard discharge 100
current (A)
Maximum discharge 100
current (A)
Storage temperature -20~55
range: (℃)
Storage ambient 5%~95%
humidity (RH)
Working environment ≤95%
humidity (RH)
.33. L E D instructions
Capacity indication
Capacity L 1● L 2● L 3● L 4● L 1● L L L
indicator 2● 3● 4●
lamp
0~25% go go go Slinc go go go Ofte
out out out h 2 out out out n
brig
ht
25~50% go go Slinc Often go go Ofte Ofte
out out h 2 brigh out out n n
t brig brig
ht ht
50~75% go Slinc Often Often go Ofte Ofte Ofte
out h 2 brigh brigh out n n n
t t brig brig brig
ht ht ht
75~100% Slinc Often Often Often Ofte Ofte Ofte Ofte
h 2 brigh brigh brigh n n n n
t t t brig brig brig brig
ht ht ht ht
Run the Often bright Slim 3
indicator
lamp, the ●
State instructions
5
Recover 80℃~110℃ 100℃
y value
R UN A LM S OC
system running explain
● ● ● ● ● ●
mode state
shut dorman go go go go go go All out
down cy out out out out out out
normal Flas go go go go go stand by
await h 1 out out out out out
the ALM and RUN,
report Flas Flas go go go go
opportu lamp
an h 1 h 3 out out out out
ne synchrono
emerge
moment us flash
ncy
3
normal Often go According to the Maximum LED
brigh out electricity Flash 2
charge t instruction
RUN lamp: on the
protec Often go Ofte Ofte Often Ofte city wire
t brigh out n n brigh n Often bright,
t brig brig t brig the city
ht ht ht electric offline
Normal standby
state when
normal Flas go According to the
dischar h 3 out According to the electricity
ge electricity quantity, often
instruction bright
instructions
ALM and RUN,
report Flas Flas
lamp
an h 3 h 3
synchrono
emerge
ncy us flash
3
5
Overflow Stop discharge,
Often bright
, short go go go go go mainstripping
Road, out out out out out No action after
opposite 24h
And so forced
on dormancy
protect
ion
undervol go go go go go go Stop
tage out out out out out out discharge
protecti
on
normal According to the status, - - -
6
Slinch 2 0 S.5 0 S.5
6
4 A power 49V 49V
pack, and the battery pack will operate from off or dormant.
yes
8
When the battery pack is in the closed / dormant state, use
device or the switch power supply, and again confirm that the
8
Then connect it from the junction row to the switch power supply.
nose should consider the line diameter and the diameter of the
terminal.
9
Note: Set the code before reset, starting from the address
code "1".
9
(1) After the installation of the battery pack, the battery
the battery pack, the fire sources and flammable items should not
10
approach and disconnect the load (turn off the electrical
phenomenon.
dioxide should not be used to put out the fire, but fire
10
At 80% of the rated capacity, replace the battery in time.
AL M la m p is
fa i l e d
Eliminate, then
return to the
factory for
maintenance;
1. Internal
2. Poor
consistency of
the cell;
3.BMS fault;
The Battery Low voltage or
Low voltage or Return to the
pack is turned overcharge overcharge alarm; factory for
maintenance;
on in red alarm
11
In order to prevent battery pack leakage, abnormal heat,
fire, performance, explosion and other things
(3) Do not put the battery pack into the water or wet it;
(4) Never charge the battery pack under the fire source or
extremely hot conditions! Do not at heat source (such as fire
or heater)
after the battery pack leaks, do not wipe it, you should
12
electricity;
13
(4) The transport vehicles should be equipped with fire
supervision;
should not have more than 1cm bump, and the product and the
carriage floor should not have more than 1cm gap. If the gap
13
(1) Lithium batteries should not be stored in the open air,
the rain;
(4) Warehouse roof and walls: the warehouse roof and walls
are required to be waterproof, and keep the walls and floor dry,
clean, not dust dust, especially not metal dust and other
14
(6) When handling materials, the load, lamination,
14