[Total No. of Questions - 9] [Total No. of Printed Pages - 2]
(2126)
16102(D)
B. Tech 3rd Semester Examination
Power Electronics-I (CBS)
EE-302
Time : 3 Hours www.epaper.tk Max. Marks : 60
The candidates shail limit their answers precisely within the answer-
book (40 pages) issued to them and no supplementary/continuation
sheet will be issued.
Note : Attempt five questions in all seiecting at least one from each
Units i-e. 1, Il. Ill & IV. The Unit V is compulsory for all. Assume
any missing Data suitably.
UNIT - I
1, (a) State role of Power Electronics Devices in engineering
applications. (3)
(b) Explain construction, working principle of a power BUT.
(2+2=4)
(c) Write various techniques of turn on of SCR. Which
techniques is widely used? (5)
2. What do you mean by forced commutation of SCR? Explain
various classes of forced Commutation with appropriate circuit
and waveforms. (12)
UNIT - II
3. Classify several phase controlled converters? Explain working
& draw circuit configuration in respect of single phase two pulse
controlled mid point converter. Derive expression of average out
put voltage & current for R and R-L series load. (12)
4. For a single phase full controlled converter using RLE series
type of load, the power is delivered by AC source of 230 volts,
50 Hz. The values of load circuit elements are R=6ohm,
L=6milihenry and E= 60 Volts. Find the average value of load
current for a firing angle delay of 50 degree. Draw suitable
waveform and circuit application for such converter. State
assumptions made. (12)UNIT - Il!
What do you mean by a Step and Step down cyclo-converter?
Explain working of a single phase to single phase mid point and
bridge type cyclo-converter. (2+10=12)
(a)
(b)
(b)
Discuss working of a three phase to single phase
controlled cyclo-converter using R and RL series type of
loads. Draw appropriate circuit and output voltage
waveforms. (10)
What are major drawbacks of AC to AC converters? (2)
UNIT - IV
What is a Chopper? How does it operate?. Discuss circuit
configuration for Type A and Type B choppers. State their
relative advantages and disadvantages. (9)
A step down chopper has input DC voltage source of 200
Volts and the chopper conducts for time 20 micro
seconds, compute the output load voltage if duty ratio is
05 (3)
Explain steady state analysis of a Type A chopper. How
duty ratio influences the ripple contents in its output
waveform in an engineering application systems. (8)
Write brief note on a step up chopper. (4)
UNIT - V
Attempt all parts Each carry equal marks.
(i)
(i)
(ii)
(iv)
(v)
(vi)
What do you mean by turn on delay time of an SCR?
Draw circuit symbol of GTO.
What is secondary: breakdown phenomenon in power
BJTs?
Which TYPE of Chopper Configuration is used for electric
braking of DC motors?
Draw Snubber circuit protection in a SCR based power
control application.
Why power electronic circuits are called power polluters?
(2x6=12)