The document provides a 6-step procedure for installing a stamp solenoid that should only be performed by a qualified technician. The technician must open covers, remove a screw and stamp cover to access the solenoid harness, connect the solenoid connector, install the solenoid ensuring alignment of lugs, reattach covers, and insert the stamp into the solenoid.
The document provides a 6-step procedure for installing a stamp solenoid that should only be performed by a qualified technician. The technician must open covers, remove a screw and stamp cover to access the solenoid harness, connect the solenoid connector, install the solenoid ensuring alignment of lugs, reattach covers, and insert the stamp into the solenoid.
The document provides a 6-step procedure for installing a stamp solenoid that should only be performed by a qualified technician. The technician must open covers, remove a screw and stamp cover to access the solenoid harness, connect the solenoid connector, install the solenoid ensuring alignment of lugs, reattach covers, and insert the stamp into the solenoid.
The setup procedure should be done by a qualified service technician.
1 Open the ADF cover and the
inner cover. 2 Remove one screw and the stamp cover. The harness of the stamp sole- noid is hooked to the backside of the stamp cover.
3 Connect the stamp solenoid’s
connector to the connector. 4 Install the stamp solenoid. The lug in the machine should be aligned to the hole of the solenoid bracket. 5 Reattach the covers.