Professional Documents
Culture Documents
Regent Dinflow Brochure
Regent Dinflow Brochure
Bare
centrifugal
P u mshaft
p s
Bare
P u mshaft
ps
Dinflow
The Regent Dinflow is a single stage end
suction centrifugal pump. It provides high
performance at an economical cost and is
particularly suited to mechanical and fire
services as well as being suitable for use
in a variety of other applications.
Design Features:
150-260
32-200 50-160 65-200 40
40-200 80-200 100 200
10 -200 150-200
125-200 -260 30
8 50-160
32-160 65-160 80-160
6
40-160
20 Operating Temperatures
TOTAL HEAD
65 100
5 50-130 -130 -160
32-130
40-130 15 With standard packed gland - minus 10˚C
4
to 105˚C. Maximum with cooled stuffing
3 10
box - 160˚C. With mechanical seal -
2 3 4 5 6 8 10 20 30 40 50 60 80 100 150 200 300 450
maximum depends upon seal fitted.
FLOW RATE LITRES/SECOND
Operating Pressures
Maximum operating pressure 1600kPa.
Maximum test pressure up to 2100kPa.
(Maximum pressure will vary depending
on particular pump model - higher ratings
I.G.P.M.
available on application).
15 30 40 60 80 100 150 200 300 400 600 800 1200 1600 2200 3000 4000
160
100
40-320H 50-320H 65
-320H 80-320H
400 Maximum Speed
32-260
300 Maximum direct coupled speeds for
80 50-260
40-260 65-260 80-260 100-260 Dinflow pumps vary between 3600 RPM
60 200
50 32-200 and 1800 RPM, depending upon pump size.
40-200 50-200 65-200 150
40 80-200
100-200
50-160 125-200
30 32-160 40-160 100
METRES
65-160 80-160
Back Pull-Out Design
FEET
80
20 50 100-160 60
40-130
-130
65-130 50
The Dinflow pump is of “Back Pull-Out”
32-130
40 design, and when a suitable spacer
10
30 coupling is fitted to a direct coupled unit,
8
the casing and motor can remain in
6 20
TOTAL HEAD
5
position while all other pump parts can be
15
4
Refer to individual curves
for final selection
removed for simple and quick maintenance.
3 10
Casing ✔ ✔ ✔ ✔
Impeller ✔ ✔ ✔ ✔
Shaft 앶 앶 앶 ✔
Shaft Sleeve 앶 ✔ 앶 ✔
Wear Ring ✔ ✔ ✔ ✔
Applications:
* Airconditioning I.G.P.M.
* Heating and Ventilation 15 30 40 60 80 100 150 200 300 400 600 800 1200 1600 2200 3000 4000
160
* Refrigeration 400
* Fire Protection 100
300
* Plumbing 80
80-400
* Circulating 60
50
200
* Transfer 40 40-320
50-320
65
-320 80-320 100 150-320
150
-320 125-320
* Irrigation 30
50-260
100
METRES
32-260 40 65
* Drainage
FEET
-260 80-260 80
-260 100-260 125
20 -260
* Water Pressure Boosting 32-200 40 50
-200 65-200 60
-200 80-200 100-200 50
* Process Industry 50 40
40-160 -160 80
* Petroleum Products 10 32-160 65-160
-160
30
8 65
* General Industry 50 -130
-130
6 40-130 20
TOTAL HEAD
32-130
* Food and Drink Manufacture 5
15
* Water Treatment and Supply 4
Refer to individual curves
for final selection
* Cooling Towers 3 10
I.G.P.M.
15 30 40 60 80 100 150 200 300 400 600 800 1200 1600 2200 3000 4000
160
50-200
400
100
300
80 32-260 50
40-260 65-260 80-260 100-260
-260
60 200
50 32-200
40-200 65-200
80-200 100 150
40 50-160 -200
32-160
40-160 80-160
65-160
30 150 100
METRES
50-13 -400
50-130 0
FEET
125-260 40
10 1150 RPM
30
8
6 20
TOTAL HEAD
5 100-320
1150 RPM Refer to individual curves 15
4 for final selection
3 10