Professional Documents
Culture Documents
MES 752 Sessional Problem
MES 752 Sessional Problem
MES 752 Sessional Problem
[A] A company received an order to deliver 20 units of Single Stage Straight Tooth
Speed-reducer Spur Gear Box complying with the following specifications:
Power to transmit =5.6kW
Input speed = 1470 (Approx.)
Transmission ratio = 3
Bearing life should be at least 2 years
Type of duty: 8 to 10 hours per day under medium shock
Provide a complete design for the gear box including the selection of appropriate bearings
indicating required fits and tolerances wherever necessary.
[B] Submit full calculation (in A4 size paper only) with Name and Roll No. on top right corner of
all the t pages. A photocopy of the same should be retained for subsequent drawing.
[C] Make detailed production drawing for the Gear Box with showing:
1. Assembly drawing:
(a) Half-sectional elevation
(b) Plan with top cover removed
(c) Sectional side elevation with section plane passing through gear axis.
2. Detailed Drawing for the following parts:
Wheels, Shafts, Bearing covers
(Part drawing for the gear box housing is not required.)
3. Make a detailed gear table (indicating all the details of the gear pair).
4. Make the Bill of materials.
[D] Important:
Provide a margin of 20mm on all sides of the A1 size drawing sheet having the name
plate in the bottom right corner.
Come prepared with the calculation ready in all respect and the margin and name
plate drawn on the drawing sheet.
Freely make use of Design Data Book (Indian Standard) for selecting important data.
Also the class note of MEC503 will be helpful.
A free hand pencil sketch (with important dimensions) will be helpful before starting
the actual drawing.
(S. Mukhopadhyay)
Jul-2023