Professional Documents
Culture Documents
Nvent CADDY 300 Universal Beam Clamp
Nvent CADDY 300 Universal Beam Clamp
Nvent CADDY 300 Universal Beam Clamp
CERTIFICATIONS
SPECIFICATIONS
Table 1/2
Flange
Catalog Rod Size Static Load
Finish Thickness A Torque (TQ)
Number (RS) 1 (F1)
(FT)
Electrogalvanize
3000037EG 3/8" 3/4" Max 1 1/8" 5 500 lb
d
Electrogalvanize
3000050EG 1/2" 3/4" Max 1 1/8" 8 950 lb
d
Electrogalvanize
3000062EG 5/8" 3/4" Max 1 1/8" 5 950 lb
d
Electrogalvanize
3000075EG 3/4" 3/4" Max 1 1/8" 5 950 lb
d
Flange
Catalog Static Load1
Finish Rod Size(RS) Thickness A Torque (TQ)
Number (F1)
(FT)
Electrogalvanize
3000087EG 7/8" 3/4" Max 1 1/8" 5 950 lb
d
Table 2/2
Catalog Number Static Load 2 (F2) Packing Quantity
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death and/or void your warranty.
2
North America Europe Europe APAC
+1.800.753.9221 Netherlands: Germany: Shanghai:
Option 1 – Customer Care +31 800-0200135 800 1890272 + 86 21 2412 1618/19
Option 2 – Technical Support France: Other Countries: Sydney:
+33 800 901 793 +31 13 5835404 +61 2 9751 8500