Winningthe highest; a praise throughout;the, world:, 15ppm Bilge Alarm filGiis-iaug This product conforms to MEPC. 107(49) *For protection of the beauntul’ s * this product plays an umportanty Advansad daviss recognized Sig reo Nets open Woy toh (UCAS; a0 JG (JAPAN) EC (Europe.DNV) CCS (CHINA) USCG (USA - USCG46CFR162,00) This product adopts an automatic operation method using sample water pressure which is matched to the operation of an oil separator or pump. _ The automatic washing function of the detection unit can reduce troublesome manual washing work, (Option) ~ An error code indication provided at occurrence of a device fault and a : stain indication of the detection unit facilitate maintenance and iret inspection. The product has a high-maintainability structure. “The device can be calibrated on a ship or on the side by using a calibration unit (However, the qualification for calibration specified by the manufacturer is required.) ‘© Operation records such as trouble alarms can be saved in a memory card and confirmed as required eThe product can measure only the oil concentration and is not affected il by SS contentifioating turbidity substance other than oil content) and surface active agent. EEE ‘For alarms, a double safety method is used. When the oil concentration is 15 ppm or more, an oil alarm is output. When sample water is defective or the instrument is defective, a trouble alarm is output.(ooril environment, mens ey foe aye ole SiMe) Mole Wee UN s moe Unigua tacnnology is draaminanrt oove Oiieyes ee ae © Coreenratonyle/eroireator (@ Dstection unit cortaination el ndcstr @ Memory capsty rat © Ot certantroule slam ctor @ Eecticwte por @arner* © Freshwater nlet @ Somie waterinet @ Detector eit 9 Semple water ott 4 Auto wosring unit ‘+ymen an auto wat Beier rose =Product Specification Measuring method Full optical continuous measuring method Operating Method Sample water pressure auto operation Measuring interval Measuring sampling time: 1 sec or less Measuring range Oto 30 ppm Measuring accuracy £5 ppm or less (at 15 ppm) Measuring pressure 0.03 to 0.8 MPa Measuring water temperature +2 to 450 Measuring flow rate 02 to 3 L/min Washing air 0.3 to 0.9 MPa (Use for option: The Automatic washing function) Bearable vibration 2 Hz to 13.2 Hz, amplitude +10 mm 13.2 to 80 Hz, acceleration 0.76 Bearable angle of inclination 22.5 deg in all planes of operation Oil concentration alarm OILAL1 — 1c contact(250 VAC, 2 A max)no-voltage contact OILAL2 1b contact(250 VAC, 2 A max)no-voltage contact - Defect alarm Jc contact(250 VAC, 2 A max,jno-voltage contact Power failure alarm 1c contact(250 VAC, 2 A max,)no-voltage contact Combined alarm ALLALI Je contact(250 VAC. 2 A max,)no-voltage contact ALLAL2 1b contact(@50 VAC, 2 A max))no-voltage contact Electromagnetic valve relay output PS. 1 contact Owner voltage contact supplied power source voltage outouts(1.5 or less VA of loads) Recorder output DC 4 to20 mA a a ‘Supply power and power consumption _5 to 264 V AC(The maximum peak voltage).50 to 60 Hz. 20 VA max Operating(working)temperature OU to SOT. 5 to 90%RH(no-condensing) Leaving(storage)temperature ~20T to 70. 5 to 90%RH(no-condensing) Material and coating color Sensor unit Material: Al 5056, C2604 Surface treatment: Alumite Nickel plating Main unit Material: ADC-12 Coating color: Munsell 7.6867/2 Shape and weight Sensor separation type Total weight =Approx. 5.9 kg. (except accessories) External dimensions W= 270mm x H = 335mm xD = 120 mm (excluding projections. When an auto washing unitoptionlis equipped) "8A partor tha spocifications, design. and content of manus ofthis produet is eubject to change without prevaus notice for provement of product perfommane and hrctons (7 FELLOW KOGYO CO.,LTD. MHead office 6-1-6 NishéNippori Arakawa-ku Tokyo JAPAN, 116-0013 TEL : 81-3-3800-9777 (main numben FAX : 81-3:3800-9770 Tokyo works: 6-1-9, Nishi-NipporArakawaku.Tokyo.JAPAN, 116-0013, Fellow keisoku company —1-16-3.Hirchata-ku, Azuma-cho Himeji-shi Hyogo-Pre.JAPAN.67 1-1 154