Professional Documents
Culture Documents
1 A Single Phase MCB Board
1 A Single Phase MCB Board
AIM:
To draw and take a print out of single line diagram of single phase MCB distribution board
by using AutoCAD..
SOFTWARE USED:
AutoCAD 2007
SETTING LIMITS:
Command : LIMITS
(Assuming A4 size is set for Drawing)
Command : LIMITS
Reset model space limits :
Specify lower left corner or [on/off] <0.0000, 0.0000> : 0,0
Specify upper right corner <210.0000, 297.0000> : 210,297
Command : GRID
Specify grid spacing (x) or [ON/OFF/snap/aspect]<10.0000> : 10
Command : ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
: ALL
[All/center/dynamic/extents/previous/scale/window]<Real time>
Regenerating model.
PROCEDURE:
I have learned that single phase distribution board can be drawn by using the basic
commands such as line,rectangle,circle&Edited by the Commands like cut
,copy,paste,move,array,trim,mirrors,hatch,test,etc
RESULT:
Thus the single line diagram of single phase MCB distribution board by using AutoCAD was
drawn and it has been printed out.