Professional Documents
Culture Documents
SONY+MHC-V42D+Ver +1 0
SONY+MHC-V42D+Ver +1 0
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
SPECIFICATIONS
Speaker section Video color system format: Supported codecs: MPEG4:
Speaker system: Latin American models: SBC (Subband Codec) File format: MP4 File Format
3-way, Double Bass Reflex NTSC AAC (Advanced Audio Coding) Video codec: MPEG4 Simple
Speaker unit: Other models: LDAC Profile (AVC is not compatible.)
Tweeter L/R: 40 mm, cone type NTSC and PAL Bit rate: 4 Mbps
1)
The actual range will vary depending on
Midrange L/R: 80 mm, cone type USB section factors such as obstacles between devices, Resolution/Frame rate:
Woofer: 250 mm, cone type Supported USB device: magnetic fields around a microwave oven, 720 × 480, 30 fps
Mass Storage Class static electricity, reception sensitivity, 720 × 576, 25 fps (except for Latin
Inputs
Maximum current: antenna’s performance, operating system, American models)
AUDIO/PARTY CHAIN IN (TV) L/R:
1A software application, etc. Audio codec: AAC-LC (HE-AAC is
Voltage 2 V, impedance 47 kilohms
(USB) port: BLUETOOTH standard profiles indicate not compatible.)
TV (ARC): 2)
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
Supplied accessories
Remote control (DC 3 V) (1)
NOTES ON CHIP COMPONENT REPLACEMENT
R03 (DC 1.5 V) (size AAA) batteries (2) • Never reuse a disconnected chip component.
FM lead antenna (aerial) (1)
AC power cord (mains lead) (1) • Notice that the minus side of a tantalum capacitor may be
AC plug adaptor* (1) (supplied only for certain areas)
* T his plug adaptor is not for the use in Chile, Paraguay
damaged by heat.
and Uruguay. Use this plug adaptor in the countries/
regions where it is necessary.
FLEXIBLE CIRCUIT BOARD REPAIRING
License and Trademark Notice • Keep the temperature of the soldering iron around 270 °C
• is a trademark of DVD Format/Logo Licensing Corporation. during repairing.
• “ DVD+RW”, “DVD-RW”, “DVD+R”, “DVD-R”, “DVD VIDEO”, • Do not touch the soldering iron on the same conductor of the
and the “CD” logos are trademarks. circuit board (within 3 times).
ALKMAN ® and WALKMAN ® logo are registered trademarks
• W
of Sony Corporation.
• Be careful not to apply force on the conductor when soldering
• M
PEG Layer-3 audio coding technology and patents licensed from or unsoldering.
Fraunhofer IIS and Thomson.
SAFETY CHECK-OUT
• W
indows Media is either a registered trademark or trademark
of Microsoft Corporation in the United States and/or other After correcting the original service problem, perform the following
countries. safety check before releasing the set to the customer:
• T
his product is protected by certain intellectual property rights Check the antenna terminals, metal trim, “metallized” knobs,
of Microsoft Corporation. Use or distribution of such technology
outside of this product is prohibited without a license from screws, and all other exposed metal parts for AC leakage. Check
Microsoft or an authorized Microsoft subsidiary. leakage as described below.
• This system incorporates Dolby* Digital.
* Manufactured under license from Dolby Laboratories. Dolby, LEAKAGE TEST
Dolby Audio, and the double-D symbol are trademarks of Dolby The AC leakage from any exposed metal part to earth ground and
Laboratories.
• T
his system incorporates High-Definition Multimedia Interface
from all exposed metal parts to any exposed metal part having a
(HDMI™) technology. The terms HDMI and HDMI High- return to chassis, must not exceed 0.5 mA (500 microamperes).
Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing
Leakage current can be measured by any one of three methods.
Administrator, Inc. in the United States and other countries. 1. A commercial leakage tester, such as the Simpson 229 or RCA
• “BRAVIA” is a trademark of Sony Corporation. WT-540A. Follow the manufacturers’ instructions to use these
• LDAC™ and LDAC logo are trademarks of Sony Corporation. instruments.
• The BLUETOOTH ® word mark and logos are registered trade- 2. A battery-operated AC milliammeter. The Data Precision 245
marks owned by the Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license. Other trademarks digital multimeter is suitable for this job.
and trade names are those of their respective owners.
3. Measuring the voltage drop across a resistor by means of a
• The N-Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
VOM or battery-operated AC voltmeter. The “limit” indication
• Android, Google Play, and the Google Play logo are trademarks is 0.75 V, so analog meters must have an accurate low-voltage
of Google LLC. scale. The Simpson 250 and Sanwa SH-63Trd are examples
• Apple, the Apple logo, iPhone, iPod, and iPod touch are trade- of a passive VOM that is suitable. Nearly all battery operated
marks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. digital multimeters that have a 2V AC range are suitable. (See
and other countries. Fig. A)
• U
se of the Made for Apple badge means that an accessory has
been designed to connect specifically to the Apple product(s)
identified in the badge, and has been certified by the developer To Exposed Metal
to meet Apple performance standards. Apple is not responsible
for the operation of this device or its compliance with safety and
Parts on Set
regulatory standards.
• T
HIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL
PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
NON-COMMERCIAL USE OF A CONSUMER FOR
(i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4
VISUAL STANDARD (“MPEG-4 VIDEO”)
AND/OR AC
(ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY 0.15 µF 1.5 kΩ voltmeter
A CONSUMER ENGAGED IN A PERSONAL AND NON- (0.75 V)
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM
A VIDEO PROVIDER LICENSED TO PROVIDE MPEG-4
VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT
RELATING TO PROMOTIONAL, INTERNAL AND COMMER-
CIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG Earth Ground
LA, L.L.C.
HTTP://WWW.MPEGLA.COM Fig. A. Using an AC voltmeter to check AC leakage.
• A ll other trademarks are trademarks of their respective owners.
• I n this manual, ™ and ® marks are not specified.
SAFETY-RELATED COMPONENT WARNING!
2
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
TABLE OF CONTENTS
Accessories are listed in the last part of the electrical parts list.
3
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 1
SERVICING NOTES
UNLEADED SOLDER MODEL IDENTIFICATION
Boards requiring use of unleaded solder are printed with the – Rear View –
leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
4
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
5
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
hole
- Left view -
DVD mechanism
deck
Insert the clip etc. processed to the
length of 5 cm or more in the hole 2 Insert the clip etc.
on the side of the CDM and push.
5 cm or more
tray
- Top view -
7
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
800 Ω/5 W
C6559
800 Ω/5 W
C2076
R
8
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SERVICE POSITION
stand
MIC board
(AR, TH, E12, LA9), GESTURE board
MIC (EMC) board
(AEP, UK, RU, MY, AUS, E4, E93)
CDM90-DVBU204//C
PANEL board
(EXCEPT MY, E12),
PANEL (PANA) board
(MY, E12)
NFC board
SMPS board
(AR, TH, E12, LA9),
SMPS (EMC) board
(AEP, UK, RU, MY, AUS, E4, E93)
9
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 2
DISASSEMBLY
Note: Disassemble the unit in the order as shown below.
SET
• JIG
2-11. LOUDSPEAKER 25CM (WOOFER) When disassembling the unit, use the following jig for speaker
(SP5) removal.
(Page 20) Part No. Description
J-2501-238-A JIG FOR SPEAKER REMOVAL
10
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
1 five screws
(+BVTP 3 × 8) (BLACK)
11
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
8 one screw
(+BVTP 3 × 8) (SILVER)
0 two claws
1 one screw
(+BVTP 3 × 8) (SILVER)
6 CN451 (5P)
8 one screw
(+BVTP 3 × 8) (SILVER)
7 three screws
(+BVTP 3 × 8) (BLACK)
12
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
3 three claws
tray
hole
- Left view -
DVD mechanism
deck
Insert the clip etc. processed to the
1 Insert the clip etc.
length of 5 cm or more in the hole 2 Draw out the tray.
on the side of the CDM and push.
5 cm or more
tray
- Top view -
13
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
9 four screws
(+BVTP 3 × 8) (SILVER)
0 CDM90-DVBU204//C
• Wire setting front side
clip, coating
6 two screws
(+BVTP 3 × 8) (SILVER)
3 CN402 (4P)
5 two screws
(+BVTP 3 × 8) (BLACK)
14
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
1 six claws
2 chuck holder assy (MB)
qa insulator
9 connector
• Installation of flexible flat cable (24 core) and flexible flat cable (5 core)
Note: This illustration sees the loading assy (MB) from bottom side.
5 three claws
5 two claws
1 flexible flat cable
(24 core)
loading assy (MB)
6 holder, FFC
3 Through the hole
4
7 flexible flat cable
(24 core)
9 filament tape
terminal face
8 filament tape
2 Through the hole
15
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
5 seven screws
(+BVTP 3 × 8) (BLACK)
3 one screw
7 panel, rear section (+BVTP 3 × 8) (BLACK)
2 four screws
(3.5 × 14), TAPPING
1 CN2001 (2P)
16
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
4 six screws
(+PWH 3 × 8 (SUMITITE))
• Wire setting
clip, coating front side 5 clip, coating
6 SMPS board
(AR, TH, E12, LA9)
SMPS (EMC) board
(AEP, UK, RU, MY, AUS, E4, E93)
2 CN001 (11P)
1 CN6500 (8P)
- Rear view -
17
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
qd four screws
(3.5 × 14), TAPPING 0 MOTHERBOARD board
• Wire setting
claw
qa two screws
(+BVTP 3 × 8)
(SILVER)
chassis
3 Remove the wires through
the chassis hole.
• Wire setting
filament tape front side
claw
1 CN2007 (8P)
chassis
qf filament tape
4 CN2206 (8P)
5 CN107 (2P)
2 CN2021 (6P) 6 CN127 (3P)
- Rear view -
Note 1: When the MOTHERBOARD mounted pc board
is replaced, be sure to refer to “DESTINATION
SETTING METHOD” on page 5.
18
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
4 terminal
(narrow side) 2 Insert the jig into a space and slowly remove
[yellow/black] the panel, front section.
Note 1: When using a jig, please work so as
not to injure panel, front section and
speaker cabinet.
5 terminal
(narrow side)
• Wire setting top side
[yellow/black]
Push the protrusion, and remove
the terminal (narrow side) [yellow/black].
5 terminal
(wide side)
[yellow]
19
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
terminal position
protrusion
3 terminal
(narrow side)
[grey/black]
1 eight screws
(4 × 20), +BV TAPPING
20
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
• Wire setting
top side
Push the protrusion, and remove
the terminal (narrow side) [black].
terminal position
protrusion
7 Remove the
loudspeaker 8cm
(mid: L-CH) (SP1)
in the direction of the
arrow.
5 four screws
(3.5 × 14), TAPPING
1 four screws
(3.5 × 14), TAPPING
protrusion
21
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 3
TEST MODE
PANEL TEST MODE COLD RESET
This mode is used to check the screen display panel, LED's and This mode is used to reset all the user settings to factory setting.
buttons. Execute this mode when returning the set to the customer.
Procedure: Procedure:
1. Press [1] button to turn on the system. 1. Press [1] button to turn on the system.
2. Press [] and [VOICE CHANGER] buttons simultaneously 2. Press [] and [VOCAL FADER] buttons simultaneously for 3
for 3 seconds. seconds.
3. All LEDs and segments in screen display panel are lighted up. 3. “COLD RST” appears on the screen display panel. After that,
This is the display check mode. “SONY” appears on the screen display panel. The system
Press [B] button repeatedly to toggle different display mode as automatically turn on and off once. Please be sure that the
below: system stay at demo mode finally before switch off the power
Segments on screen display panel: supply.
All On → 1st Group On → 2nd Group On → All On → All Off
4. Press [0 -] button, the buttons and knob check mode is DISC TRAY LOCK
activated. When the disc tray does not open and “LOCKED” appears on the
5. In the buttons and knob check mode, the screen display panel screen display panel, disc tray lock mode has been activated by the
displays “K 0”. shop front.
Each time a button is pressed, “K” value increases. However, To release from Disc Tray Lock Mode:
once a button has been pressed, it is no longer taken into 1. Press [1] button to turn on the system.
account. After all the buttons have been pressed, “K” value 2. Press [FUNCTION] button repeatedly to select the DVD/CD
will toggle between “OK” and “K29”. function.
6. To release from this mode, press the buttons in the same 3. Press [MEGA BASS] and [VOCAL FADER] buttons
manner as step 2, or disconnect the power cord. simultaneously and hold down until “UNLOCKED” displayed
on the screen display panel.
MODEL, DESTINATION AND VERSION DISPLAY MODE
This mode is used to check the model, destination and software SHOP FRONT DEMO
version of the set. The playback started automatically and the “ * DEMO * ” appears
Procedure: on the screen display panel.
1. Press [1] button to turn on the system. This is the Shop Front Demo mode which is activated by the shop
2. Press [] and [VOICE CHANGER] buttons simultaneously front.
for 3 seconds.
All segments in screen display panel are lighted up. To release from Shop Front Demo
3. Press [0 +] button. Model information appears on the screen 1. Press [] and buttons [MIC ECHO] simultaneously for 5
display panel. seconds.
4. Press [0 +] button again. Destination information appears on
the screen display panel.
5. Press [0 +] button. Serial number appears on the screen dis-
play panel.
6. During the serial number display, press [0 +] button. Each
time [0 +] button is pressed, the screen display panel shows
the version of each category software in the following se-
quence: SC, MTK, BT, BTE, PF, SUB and return back to mod-
el information display.
7. Press [] and [VOICE CHANGER] buttons simultaneously
for 3 seconds to exit.
USER RESET
The user reset clears all data including preset data stored in the data
flash to initial conditions.
Procedure:
1. Press [1] button to turn on the system.
2. Press [MEGA BASS] and [GUITAR] buttons simultaneously
for 3 seconds.
3. “RESET” appears on the screen display panel. After that, the
screen display panel becomes blank for a while, and the system
goes to demo mode.
22
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 4
ELECTRICAL CHECK
TUNER SECTION 0 dB = 1 μV Checking Location:
– MOTHERBOARD Board (Component Side) –
FM AUTO STOP CHECK
signal
generator
set
+
75
–
MOTHERBOARD board
CN302 pin 17 (RF) +
CN302 pin 1 (GND) –
Procedure:
1. Connect the oscilloscope to CN302 pin 17 (RF) and CN302
pin 1 (GND) on the MOTHERBOARD board.
2. Press the [1] button to turn the power on, and press the
[FUNCTION] button to select CD/DVD function.
3. Set the test disc (CD: YEDS-18) on the tray and press [B]
button to playback.
4. Confirm that oscilloscope waveform is as shown in the figure
below (eye pattern).
A good eye pattern means that the diamond shape (◊) in the
center of the waveform can be clearly distinguished.
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
level:
1.1 ± 0.25 Vp-p (DVDSL)
1.0 ± 0.25 Vp-p (CD)
23
SYS SET
24
SMPS Board Diagnosis Flow
AC IN
MHC-V42D
(1) Yes
SYS SET
Optical Block Diagnosis Flow (1/2)
TRAY IN
Does Spindle motor rotate? No Checks CN402 SP+/SP- signal. No Checks circumference circuit for SP+/SP of IC401.
(Visual check) Does it output the signal? Checks circumference circuit of IC301 DMO Signal.
Yes Yes
The Spindle motor has a problem.
Replaces BU.
Does Optical pickup do focus search? No Checks CN302 FCS+/FCS- signal. No Checks circumference circuit for FCS+/FCS- of IC401.
(Visual check) Does it output the signal? Checks circumference circuit of IC301 FOO Signal.
Yes Yes
The Optical pickup has a problem.
Replaces BU.
25
MHC-V42D
SYS SET
26
Optical Block Diagnosis Flow (2/2)
A
MHC-V42D
2019/03/05 00:47:46 (GMT+09:00)
Does laser diode become luminous? No Checks JL306 (LD780) signal. No Checks circumference circuit of Q402.
(Visual check) Does it output 2V when laser become luminous? Checks circumference circuit of IC301 LDO1.
Yes Yes
The Optical pickup has a problem.
Replaces BU.
DISC IN
Yes
Yes
Is there no problem with Long term Aging Test (60min)?
Confirms that there is no sound skip. No
Yes
END
SYS SET
MOTHERBOARD Board Mount Amplifier Diagnosis Flow (1/3)
1. “PROTECT3” is displayed after turning the power on
“PROTECT3” is displayed on the screen display panel after turning the power on.
2019/03/05 00:47:46 (GMT+09:00)
Yes
“PROTECT3” is not displayed, when removing the speaker connector (CN2021) and Yes
Check and replace the speaker.
turning the power on.
No
Yes
Check that IC2002 pin 27, 32, 35 and 39 is short to GND. Exchange IC2002.
No
27
MHC-V42D
SYS SET
28
MOTHERBOARD Board Mount Amplifier Diagnosis Flow (2/3)
2. The sound is not outputted
MHC-V42D
Yes
No
Check that the signal is input to IC2001 pin 24 and 25. MOTHERBOARD board damaged. Exchange the MOTHERBOARD mounted pc board.
2019/03/05 00:47:46 (GMT+09:00)
Yes
No
Check that the PWM signal is outputted from IC2001 pin 39, 41, 48 and 49. Exchange IC2001.
Yes
SYS SET
MOTHERBOARD Board Mount Amplifier Diagnosis Flow (3/3)
3. IC and MOTHERBOARD board after replace checking guide
Volume set to Max, sound field set to default, Mega Bass set to “ON”. Exchange original damaged IC.
Yes
Repair is successful. MOTHERBOARD board damaged. Exchange the MOTHERBOARD mounted pc board.
29
MHC-V42D
SYS SET
30
IC2002 Confirmation for MOTHERBOARD Mount
EXCEPT AEP, UK
JL005
IC004 IC006 JL011
1 2 1 2
C080
C051
MHC-V42D
R070 JL3005
R035 R029 JL3007
JL073 JL047 JL048 JL3006 JL3001
R060 JL3008
Q014
Q004
R792 JL614 JL3004
JL049 JL616 R3047 R3046 JL3002
R033 JL113
JL046 JL908
JL909 CL3059
C031 JL615 R3048
JL072
JL114 JL217 JL613 JL910
JL045 CL3058
R069
3 1 D3005
IC007 4 6
JL617
JL068 JL216 4 C3000
3
C671
Q012 JL206 C986
C3018
JL071
R015 JL196 JL198 JL200 JL201 JL215 JL203 JL204 IC3001
C678 C674 1 2
R720
C069
R018 C672
R066
R065
C062 C3019
R191
JL012 7 1
JL171 JL197 JL202
JL001 JL003 R064
C673
R723
JL199 JL235 JL125
JL008 JL173 JL205
JL108
Q011 JL172 IC609 R708
JL059 JL174 JL169 8 14
R068
JL195 C666
JL044 R722 R3015
CL2039 R719 R917
JL175 C667
R3014
R711 CL3010
JL176
2019/03/05 00:47:46 (GMT+09:00)
R3009
CL2038 JL105
3
4 6 JL069 JL131
JL132
IC010 FB110
R198 JL134
JL2033 JL153 JL297
R544
R050 C074
R543
R220
R545
R203
R110
JL135
R122 JL152
C299 R546 JL120 JL106
JL109 R195 JL117
R518 JL154
R552
JL118
JL116
JL122
JL155 JL151
JL289 C134 C138 JL115 JL119
C136 C144 C147 JL530
JL121
JL107
R551
C131 JL124 JL123
R145
R144
CL2004 C123 R152 R532
C122
R298
R256 R135
RB101
R134
R184
C120 R276
R249 JL529
R283
CL2010 C282 C283 JL521
C2128
R104
JL148 TH571
R177 C281
JL522
R176 C160
R149 C280 JL523
C159
JL2031
C117 JL520
C118
R123
CL2011
C2127 C158 JL140
R175
R131 JL139
R154
C2116
C115
C157 Q110
7 1
C155 JL141
R102 JL526
R137
JL194 JL230
R2147
JL150 IC102 RB105 Q111
R2146 C504 C156 JL231 JL232 C012
IC2003 R140 R153 JL002
C114
JL287 R240 C087
5
8 14 C070
C154
R103 RB104
R139
R507
R107
1
8
C008
R187
CL2026 JL269 R533 C112 IC106
R097
R293
C102 JL147 JL145
R143
R222
R129 JL528
8
R120 JL527 C065 6 4
C168
R170
JL143 IC002 3
RB106
R284
C502
4
R255
5
IC003 1
R515
C153
C164
C111
R300
R274 R165 C095
JL142
C178 R259 JL525 JL524 JL144
JL138
R524
C503
R119
C133 C140 R237 JL149
C135 C137 R155
R513 R512 C146 C148
R163 JL137
R162
R254
R215
JL212 JL146 JL070
R514
R273 JL209 R1005 Q1001 JL024
JL325 JL294 R1004
C1001
D1001 Q1005
R528
JL136
R1002
C501 R534
R1007 R037 JL021 Q013
JL327 JL130
R174
R230 Q1002 R1001 R1003
R148 Q1000 R034
R1006 Q005 C064
C1000
JL022
R028
R529
JL2039 CL2022 JL402 JL405 JL406
JL2034
JL023 JL401
CL2023
C066
JL326
JL312
JL328
CL2036 JL329
JL318
R429
JL324
C406
JL301
R316
C405
R2021 CL2035
C311
C424
JL2037
CL2020 C367
CL2021
JL320
JL310
CL2025
JL2040
R2022 JL460
Q402
JL306
JL308
JL461 JL323
JL302
CL415 JL304 JL317 JL322
JL316
14
JL463
15
JL314
JL2038 R310 JL303 JL319 JL050
JL309
R478 CL411
R318 C462
Tester Tester C2019
JL462 R305
JL321 Q305
Tester JL315 C463
C408
1 FB455 Q304
JL307 CL412
IC452 3 R313
8
R304
21
R389 C404
C423 4 6 CL410
JL2008
C466
R432 C409
JL311 JL360
R314
C465 R451
IC401
30
R498
29
Tester CL414
R412 R431 C991
CL2024
R418
JL305 CL405 R407
R411
22
R435 CL413
CL409
C655 R406
JL313 C413 CL403
R950
JL2003 R952 R951
R688
JL2036 C653 C649 CL401 CL404
C407
C711
R691
28
CL402
CL408
7 1
R783
C949 IC606
C646
C992
R687
8 14
24
13
R957
12
25
JL2018 JL2009 R986
Q612
R778
R661
C640
R985 C617 JL2207
R690
R677
R984
R959
IC904 C622
JL2011 R982
R674
R785
R637 C695
R981 C648
1
JL2006
36
JL2016
R983
37
JL2005
C960 C985
C726
48
C981
R953 R955
R665
R664
C950 JL603
C954
CL2012 JL2015 X602 R794
C963
R658
R639
R660
JL356 R657
C951 C952
JL361 JL357
C316
JL358
C363
Tester JL359 C336
R326
C331 C357
C319 C325 R348 R352 JL362
C330 L301 JL2203
C365
C328
C326
C350
C334 C369
R330 C358 JL2206
Tester Tester CL315 R339 C373
C338
6
JL355
R358 R328 C342 4
C641
C372
R360 C339 RB310
IC303 R669 JL2224
C360
3
CL310 CL313 C340 R381
1
Tester
C321
R913
R911
C643
JL2200
CL316
R914
C344
CL311
CL309 R321 R302 R303
C315
R663 R662
R912
JL2223
R671
C343
CL307
CL395
R382
C359
CL2042
R319
C657
C652
C351 CL308
CL2043
JL2035
C375
C347
C647
JL2020 JL330
R370 C352
C650
C346 JL2202
R309 C348 C364
JL2222
JL2026
C306
R857
CL380
R945
R2208
R947
C2217
Q302
JL604 JL605
R946
JL618 R943 C2219
R1027
CL2045 R1025
R651
C1011
C687
C2227
Tester R686
1
8
R689 R685 IC902 C936
IC1001 15 11
JL2221
CL2047 R1023 16 10 C2203
4
5
X900
R944
C934
R1017
Q605
20 6
5
R1022
C665 C660
C1009
C1004 R1024 L902 R939
CL2046 JL635 1
C1003
L605
C933
C932
C931
1
5
C1010
R940 C2221
2
CL2041
Tester JL1003 L901 C2200
IC1000
3
4
C930
C2223
R1026 JL619 R2206
L900
C2225
C639
C1005 C1013 R937
JL2030 CL2049 CL2048 CL2050
D900
CL2052 CL2051 JL620 JL101
JL2201
JL901
JL905 JL631
JL102 JL900
C2151 JL111
1 2
CN900
JL110
JL2029
FM
ANTENNA
<Note>
Please check each channel’s resistance value for the Coil’s terminal and Capacitor’s + and – terminal.
These terminal's resistance value should not be near to 0Ω (short).
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 6
DIAGRAMS
6-1. BLOCK DIAGRAM - MAIN Section (1/2) -
L 5 Y1 Y 3 3 1
AUDIO/PARTY
CHAIN IN (TV)
R R-CH
LINK SET
Q603
MUTING
MIC AMP CIRCUIT
IC7701 Q602,Q606
J7701
MIC1 5 7
3 1
MODE LPF
J7702
SELECT DAC IC603
MIC2 Q7708 IC604
GUITAR
1 BCK VOUTL 7 3 1 1 Y0
3 LRCK A B
16 SCK 10 9
2 DATA VOUTR 8 Rch
ADC
ANALOG
IC609
SELECTOR
Q612
14 VINR
13 VINL
8 BCK 4 MPIO_A1
7 LRCK
6 SCKI DOUT 9
ADC
IC606
Rch 14 VINR
LRCK 7 9 MPIO_C2/ALRCK_I1
13 VINL BCK 8 8 MPIO_C1/ABCK_I1
6 SCKI DOUT 9 10 MPIO_C3/ADIN_1
SERIAL FLASH
IC106
Rch BIAS DETECTION
HOLD/RESET(IO3)
Q605, Q607
ERROR/INT0
NPCM/INT1
DI(SIO0)
WP(IO2)
DO(IO1)
>002B
DOUT
CLK
LRCK
CS
BCK
ARAGON-BCK0
AMP SECTION 1 6 7 3 5 2
ARAGON-LRCK0 1 2 17 18 19
(Page 33) ARAGON-MCK
• Signal path 120 52 175 96 114 29 30 43 32 70 71 91 92 139 140 47 169 168 167 166 170 172 33 48 42 41 28 26 24
: DVD PLAY Q-Flash-CS
Q-Flash-CLK
Q-Flash-SIO3
Q-Flash-SIO2
Q-Flash-SIO0
Q-Flash-SIO1
LOW_AC-DET
MIC-DET2
MIC-DET1
LINK-SET
MODE-SEL
SSIO_BCK0
SSIO_LRCK0
AUDIO-CLK-OUT
SSIO_DO
EXTAL
XTAL
AUDIO-X1
AUDIO-X2
USB-X1
USB-X2
LINK-DET
SSIO_DI
/LINE MUTE
DIR-INT0
DIR-INT1
SSI3-DI
SSI3-LRCK0
SSI3-BCK0
: AUDIO (DIGITAL)
: AUDIO (ANALOG) SYSTEM CONTROL
IC109 (1/6)
: MIC
• R-ch is omitted due to
same as L-ch.
MHC-V42D
31 31
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
EXCEPT AEP, UK
FM DRIVER SYSTEM CONTROL
(FM RECEIVER) IC109 (2/6)
CN900 IC902
ANTENNA 2
FM 1 FRF1 IIC/RDSI 6 45 ST-RDS
CK 8 125 DIR-CP-TUNER-SCL
DA 11 126 DIR-CP-TUNER-SDA
AUTHENTICATION BLUETOOTH (STEREO AUDIO MODULE)
COPROCESSOR CP3000
IISD 14
IC3000
LRCK/LOUT 13
BCLK/ROUT 12 STEREO A/D CONVERTER
SDA B1 16 P1_3(CP_SDA) IC904(2/2)
SCL A1 15 P1_2(CP_SCL)
RFS0 (BM64_LRCK)
SCLK0 (BM64_BCK)
IC905
DT0 (BM64_DATA)
11 3A 3Y 9 14 MPIO_B3/ADIN_2
1Y 4
HCI_RXD
2 1A 13 MPIO_B2/ALRCK_I2
HCI_TXD
RST_N
5 2A 2Y 7 12 MPIO_B1/ABCK_I2
P2_0
MFB
EAN
RESET
IC3001 2 3 4 26 13 20 19 32 41 34 RST
BT3.3V 2 VDD VOUT 4
3 1B
6 2B 38 DIR-RESET
10 3B
SELECT 1 108 BT-TUNER-SEL
TEST_MON108
164 MFB
113 BT-RESET
BUS BUFFER
IC102 (1/2)
5 2A 2Y 6 65 BT-RXD(MD-CLK)
133 BT-TXD
165 EAN
BLUETOOTH
BT3.3V POWER CONTROL 16 BT-ON
Q103, Q104
124 P20
NFC MODULE
IC001
110 NFC-INT/TEST-MON110
111 3D-DETECT
103 3D-RESET/TEST-MON103
• Signal path
: TUNER (FM)
: BLUETOOTH
MHC-V42D
32 32
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
>002B
ARAGON-MCK
MAIN SECTION (1/2) 11 MCLK PWM_P_2 41 14 INPUT_C OUT_C 32
ARAGON-LRCK0 TWEETER
(Page 31) 22 LRCLK PWM_P_1 39 15 INPUT_D
(L-CH)
ARAGON-BCK0
23 SCLK
SYSTEM CONTROL
IC109 (3/6)
OUT_D_27 27
WOOFER
OUT_A_39 39
OUT_A_40 40
+5.2V REG.
+13V IC2003 FAN MOTOR
FAN RESET DRIVER
SWITCH Q2000
CN2001
Q2005
TO FAN
FAN
AMP-PROTECT 78 PROTECTION
(LOCK)
Q2002
• Signal path
: AUDIO (ANALOG)
: AUDIO (DIGITAL)
MHC-V42D
33 33
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
RF 119 RFIP
MTK-LRCK
ALS/ALRCK GPIO 114
ASDATA0
CENTER/ASDATA0 GPIO 115
MTK-MCK >001B
VOA/A 125 RFC LFE/ACLK GPIO 109
MTK-BCK
VOB/B 124 RFB ARS/ABCK GPIO 110 MAIN SECTION (1/2)
VOC/C 123 RFA SERIAL FLASH
VOD/D 126 RFD IC302 (Page 31)
ARC_SPDIF
VC 5 V20 SF_DO 25 2 DO(IO1)
SF_DI 26 5 DI(IO0)
PD 8 MDI1
SF_CK 27 6 CLK ARC BUFFER
AUTOMATIC POWER SF_CS_ 24 1 CS IC1001
FE_LD_CD (780) CONTROL (FOR CD) 128 FE_CD_IOP- SD-RAM
Q402 IC306
3 2A 2Y 5
9 LDO1 RD0 - RD15 DQ0 - DQ15
AUTOMATIC POWER
FE_LD_DVD (650) CONTROL (FOR DVD) 127 FE_DVD_IOP- RA0 - RA11 A0 - A11
Q401
BA0 72 20 BA0
10 LDO2 BA1 73 21 BA1
RCLK 60 38 CLK
(LO:DVD.HI:CD)MSW 18 MSW RWE 68 16 WE
CAS 69 17 CAS
CD_VR (780) 14 CD_VR RAS 70 18 RAS
DVD_VR (650) 15 DVD_VR DQM0 49 15 LDQM
DQM1 59 39 UDQM CN1000
ARC 14
5CH SYSTEM MOTOR DRIVER DATA2+
TX2P 94 1
IC401 DATA2-
TX2N 93 3
DATA1+ 4
TX1P 91
SP+ 11 VOSL+ DATA1- 6
VINSL+ 4 12 DMO TX1N 90
SP- 12 VOSL- DATA0+ 7
TX0P 88
DATA0- 9
TX0N 87
SL+ 17 VOLD+ CLOCK+ 10
VINLD 23 13 FMO TXCP 85
SL- 18 VOLD- CLOCK- 12
TXCN 84
SCL (5V) HDMI OUT
HDMI_SCL 28 15 (TV) ARC
FE_TRK+ 16 VOTK- SDA (5V) 16
VINTK 26 16 TRO HDMI_SDA 29
FE_TRK- 15 VOTK+ HOT PLUG DET 19
HPLG 81
+5V REG
FE_FCS+ 14 VOFC+ IC1000
VINFC 1 17 FOO
FE_FCS- 13 VOFC- POWER +5V POWER
AVDD33_12 83 SUPPLY DVDD3.3V AVDD+9V 5 VIN VOUT 4 18
Q302, Q303 CONT
MUTE 28 108 MUTE
XTALO 4 1 HDMI CEC
BIAS 27 6 V14 X301 CONTROL CEC
13
27MHz Q1000, Q1001,
XTALI 3 USB SWITCH CONTROL Q1002, Q1005
IC453
CN451
USB_DP 19 7 HSD2+ 3
5 HSD1+ D+ 1 D+
USB_DM 20 6 HSD2-
2
4 HSD1- D- 2 D-
USB POWER CONTROL REC/PLAY 5V 1A
10 S
IC452
8 OE
4 /FLAG 1
OUT 6 USB+5V
GPI013
3 EN
PRST_
IFSDO
IFSCK
IFCS_
IFSDI
35 38 37 34 36 32
MTK-POWER-CTRL
CEC_OUT (DVD)
CEC_IN (DVD)
USB-OC
VBUS-OE
MTK-BUSY
MTK-RESET
MTK-SDO
MTK-SDI
MTK-CLK
MTK-XIFCS
DP0
DM0
MHC-V42D
34 34
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SYSTEM CONTROL
IC109 (5/6)
M+5.2V
D7002
MB-LED RED MEGA BASS
MB-LED 94
LED LIGHT
Q7003
D7001
GUITAR-LED AMBER GUITAR
GUITAR-LED 51 LED LIGHT
M+5.2V
D7010
SKYBLUE
GESTURE_LED 1 GESTURE_LED GESTURE ON/OFF
LED LIGHT
Q7005
D7003
BT-LED BLUE BLUETOOTH
BT-LED 56 LED LIGHT
M+5.2V
D8151 D8152 SW LED
SW-LED-SKYBLUE
SPK-LED Q101 LIGHT
RGB-TRANS-PNL-LED/SPK-LED 115
D8055
RED HILED
OUT9 14
RGB_SOUT OUT10 15
RGB-SOUT 117 2 SIN
D8053
GREEN HILED FR PARTY
OUT11 16 LIGHT R
RGB_SCLK OUT12 17
RGB-SCLK 134 3 SCK
D8051
BLUE HILED
OUT13 18
RGB-TRANS-LED OUT14 19
RGB-TRANS-LED 173 4 TRANS
D8004
RED HILED
OUT5 10
RGB_PWM-CLK OUT6 11
RGB-PWM-CLK 136 21 PWMCLK
D8001
GREEN HILED FL PARTY
OUT3 8 LIGHT L
OUT4 9
D8003
BLUE HILED
OUT1 6
OUT2 7
3D_SDA
128 3D(GESTURE)_SDA
GESTURE CONTROL
IC7500 3D_SCL
127 3D(GESTURE)_SCL
MHC-V42D
35 35
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
>004B
MAIN ON PANEL, POWER
SYSTEM CONTROL +13V SUPPLY SECTION (2/2)
REMOTE CONTROL IC109 (6/6) (Page 37)
RECEIVER
IC7450 POWER DISTRIBUTION
PROTECTION CONTROL
PCONT-DAMP 118 SWITCH
Q576
IC003
VO 1 135 SIRCS
PROTECTION CONTROL M+5.2V_PNL 6 OUT IN 1
Q575 4 FLAG EN 3
EXCEPT MY, E12
+5V/ +5.2V REG.
PROTECTION CONTROL POWER DISTRIBUTION IC001
S7000 6 POWER-KEY SPM-C-MON 79 SWITCH
Q574
IC010
USB +5V 3 SW1 VIN1 1
MY, E12 PROTECTION CONTROL M+5.2V 6 OUT IN 1 M +5.2V 14 SW2 VIN2 16
Q572 4 FLAG EN 3
S7044
PROTECTION CONTROL
C-CONT 55 Q571
FE_5.2V_MOTOR POWER CONTROL
FE_5.2V_TRAY PROTECTION
EXCEPT MY, E12 Q013
THERMOSTAT
SPM-AMBIENT-TEMP 80 TH571
S7001~S7003, S7005, S7007, 11 PG2
S7009, S7011, S7013, S7015, 84 AD-KEY0 PROTECTOR 82 POWER CONTROL 6 PG1
S7017, S7019, S7022, S7024, PROTECTION 5 EN1
S7026 Q010 (1/2) 12 EN2
MY, E12
USB-OE 35
LOW_AC/PCONT-BTSTBY
VBUS-OE 112
S7030~S7043 +3.3V/ +1.2V REG.
PCONT-BTSTBY 122
POWER DISTRIBUTION IC009
VOLTAGE DETECTOR SWITCH
IC103 IC007 VIN1 1
E +3.3V E +1.2V 3 SW1
EXCEPT MY, E12 VIN2 16
RES 76 4 VOUT VDD 2 6 OUT IN 1 EN1 5
S7004, S7006, S7008, S7010, 4 FLAG EN 3 14 SW2 EN2 12
S7012, S7014, S7016, S7018, 85 AD-KEY1
S7020, S7021, S7023, S7025, POWER CONTROL
S7027, S7029 PROTECTION 6 PG1
Q009 11 PG2
MY, E12
POWER CONTROL POWER CONTROL
D +3.3V PROTECTION DVDD +3.3V PROTECTION
+1.2V REG. Q005
S7045~S7058 Q008 +1.2V
IC303
POWER CONTROL POWER CONTROL
PROTECTION +3.3V PROTECTION
Q010 (2/2) Q110
POWER CONTROL
+3.3V PROTECTION
AVDD +5V Q304
+12V REG. POWER CONTROL
+12V PROTECTION
IC2000
Q111
POWER CONTROL AVDD +9V
EXCEPT AEP, UK PROTECTION
Q305
POWER CONTROL
+3.3V REG. +5V REG. +9V REG.
FL DISPLAY/ +3.3V PROTECTION
IC903 IC006 IC004
FL DRIVER Q004
ND7000
ST-CE 44
DIN 4 FL-SOUT POWER CONTROL
PROTECTION
POWER CONTROL +12V REG.
Q014
DVDD +5V PROTECTION IC002
Q007
CLK 2 FL-CLK
SW +12V 1 OUT VCC 8 POWER CONTROL
EN 5 SW +13V PROTECTION
POWER CONTROL Q011
STB 176 FL-LATCH MTK-POWER-CTRL 59 PROTECTION
Q006
POWER CONTROL
PCONT-PSAVE-PROTECT 60 PROTECTION
VIN BUS BUFFER Q012
IC102 (2/2)
LATCH ON
F- LATCH-ON 27
D7005 LOW AC DET
LOW_AC-DET 96
MHC-V42D
36 36
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
29 PVDD_CD
30 PVDD_CD
31 PVDD_CD
TRANSFORMER
36 PVDD_AB
D6000 T6300
2 18 D6504 37 PVDD_AB
17 38 PVDD_AB
3
SWITCHING MODE POWER 16
SUPPLY CONTROL
IC6300 4
D6526 15 D6501
DRIVER F6500
DRV 5 Q6300, Q6301, 5 14
Q6302, Q6303
D6312 13
>004B
JL6510 MAIN ON
D6340
7 SWITCH PANEL, POWER
12 Q6504
SUPPLY SECTION (1/2)
D6341 8 11 (Page 36)
CS 3 9 10
SWITCH JL6511 LOW_AC/PCONT-BTSTBY
Q6501
REGULATOR
VCC 6
Q6304, D6308
D6313 D6519
SMPS (EMC)
CN6001 D6311 D6520
LF6001 LF6000
AC INLET D6001
TH6000
SWITCH JL6503 +13V
8 HV LATCH 1
Q6306
F6000
FB 2
FEEDBACK
CIRCUIT
GND 4
Q6509, D6522,
D6523, D6524,
D6525, D6530
LOW AC LOW AC DET
DET
AC DETECTOR
PH6300
MHC-V42D
37 37
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
• Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location
MHC-V42D
38 38
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-8. PRINTED WIRING BOARD - MOTHERBOARD Board (Component Side) - • See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
FR PARTY BOARD FL PARTY BOARD PANEL BOARD (EXCEPT MY, E12) SW LED BOARD NFC BOARD MIC BOARD (AR, TH, E12, LA9)
PANEL BOARD (EXCEPT MY, E12) IR BOARD
MOTHERBOARD BOARD CN8001 CN8052 PANEL (PANA) BOARD (MY, E12) CN8151 PANEL (PANA) BOARD (MY, E12) CN001 NO7451
MIC (EMC) BOARD
(AEP, UK, RU, MY, AUS, E4, E93)
A (COMPONENT SIDE) (Page 46) (Page 46) NO7008
(Page 41)
(Page 45) CN7010 (Page 45) (Page 45) CN7701
EXCEPT AEP, UK
>001P >002P TO LOADER DRIVE (CDM) >004P (Page 41) >006P >007P (Page 44)
>003P >005P >008P
(CHASSIS) (CHASSIS)
CN107
C2202
C3503
R2221
R2207
R2203
B
JL056 Q101
24
R402
C2209
CN2206
R2227
R2214 R2216
IC2200
1 8 1 2
IC3000
R2205
R2209 C403 R027
R179
C402
R409
R410
R408
CN402
R2215
R541
R2225
R401 R404 CL3062
C419
R2220 R449
R2219
C076
R2213
C2214
1
C2206
13
12
R2218 R448
R2212
R2211 C625 C634 R3003
R142
R3022
R654
C635
R647 R447 R3004
C631
CL3034
CL3011
R751
R638 R656 R446 JL055 R3005
C767
C418
4
C621
CN108 FB610
C411
R3021
R634 R635
R646
R655
R640
R652
C633
R916 R649 R648
R600
R627
C612
C619 R415
IC603
C941
2 1
IC903
CL3033
CL3016
CL3015
CL3014
CL3013
CL3012
CL3039
CL3038
CL3037
CL3036
CL3035
CL3019
CL3032
CL3031
1
D402
C616
C615
CL3020
16 9 8 7 6 5
C
C624 R263
C606
3 4 8 7 6 5 D401
C605
CL3026
C614
Q010
IC602
C938
C618
IC601 1 R030
R628
R615
C613 8
C943
R616
IC604
R622
FOR 8 1 2 3 4 2 14
CL3027 R3020
SERVICE ONLY 1
R750
1 2 3 4
R632 CL3028
R607
R608
CN103
R609
C607
C604
R626
CL3023
C630
R610 R613 C610 16 1 15 C3004
R915 C603
9
R631
CP3000
R620
R642 C632 R630
R602
R604
R614
CL3022
C601
R605 R617 C608
C620
C602
C067
CL3024
CL3029
R644 C766 R820
6
R618
R619
C609 R506
C664
CL3046
CL3047
CL3048
CL3049
CL3040
CL3050
CL3054
CL3055
CL3043
R508
CL3030
R101
CL3057
R650
C362
R641
CL3041
CL3045
CL3056
C654
CL3042
R784
R923 1 5
16
27 1
1
D
FB320
R779
IC905
FL601
AUDIO/PARTY Q603 R781
1T
2 6
CHAIN IN(TV) CN105
C628 R753
Q602
IC306 R782
L R
FL301
R653
9
8
JL296
FB321
C627
R540
R625
Q606
JL295
R624
X104
7 1
CN120
C151
R290
R752 C298
C917
R264
R288
28 54 R510 C297 6 2
R271 R275
JL601
C626
3 1
R285
9
R270
R291
R278
R280
R208
2T
Q607
CN127
S
C152
FB603
8
C658
R272
CN451 R289 R292
R267
R700
R531
RB306
R189
1 5
R261
R192
J602
C659 R756 R132 FB602
R133
R692
R257
R379
RB309
C629
133
176
C656
E
(CHASSIS) RB304 R130
132
FB601
R369
1
R242
R121
CHAIN OUT R345
R380
R716
R535
R550 R549
2
RB308
R251
RB301 R344 R355
L R
CN902
1
RB307 CN303 R171 R548 R547
C324
R356 2 4
R241
Q007
RB302 R354 R232
5 R238
4
R236
64
33
C143
32
65
R229
R342
R340 R329 1 5
R335
IC453
C142 R233
5
3
R327 R166
RB305
R039
R226
7 6
1 2
R224 R227
FB013
R228
C141
IC109
2T
1
8
R225
10
S
C139
R331 R221
C468
R040
C308
RB303
R077
R470
R218 R509
24
C307
23
R1012 Q006 R213
F R211 Q103
C073 (CHASSIS)
C167
R1020
JL053
R520 R295
C1006
CN302
R1019 R603
RB107
D103
R1000
R517
R1011
JL363
C958
C303
R987
C302
R205
R332
19
R109
CL329
R421
C068
R1015
Q104
96
R108
1
R988
R200
128
C323
C421
97
R1014 C420
Q008
C072
R989
R301
Q401
R422 R193
R365
R1010 JL332
Q009
R334
44
89
C083
HDMI OUT
C132
R299
R196
R351
R367
C322
X301
R150
45
88
R424
R061
(TV) ARC
L1002
R378 R450
R190
C085
C337
2
1
R434
C341
R173
R181 R519
C130
JL331 R349 C129
X103
RB108 RB109
Q303
R151 C161
L1001
C366
R323
R247 R188
R164 R186
R169
C084
C128
C029
R160
R197
1
C057
R168
L007
C126
R172
R511
C047
R234
G
R158
C116
C149
X105
R032
C038
C041
FB101
R114 R026
C127
R159
C162
C2059
C028
8 1
C014 C049
C2150
C106
R127
IC009
R088
C110
C2135
C150
IC103
C109
R577
C2069
R116
C040
R113
C2095
C2090
C019
C2134 C2133 R115 9 16
L2003 L001
R2044
C107
1
C050
4
C2015
R117 D571 L004
C2071
C003
C005
C006
C004
R128
R2034
Q107
C103
R572 R571
R014
2
3
R2010
Q572
R2138
R487
R051
R2002
R013
R2099
C105
C2039 C2036 C096
C016
D102 C054
R012
C2060
JL2044
D572
R485
R2031
C2043
C104
R099
28
R2011
29
C015
22
R087
Q571
L002
23
C573
CN2021
C2010
R2096
H
R2009 JL2041
C574
JL2043
C017
C2153
IC2001
8 1
L003
R2093
C052 C013
Q574
IC001
C2027
R2118 Q576
C577
C2028
R2004
C030
R491
C026
9 16
R2008
C2021
C2108
R483
JL2042
IC2002
L008
C2026
Q575
R001
C2008
R023 C053
C2032
R2076
C2152
C2058
L009
C039
R2046
R2152
C2020
R2024
C2003
C2042
C2067
56
C2076
44
C2007 L006
C2016
C2009 C037
D2001
C2038 C2006 C091 C011
R086
R2042 C2023
R2026
L2002
R2025
C092 C010
I
Q2002
R2084
C2024
R2020
C2014
C2013
R2019
C2025
C048
Q2005
R2087
C2022
R2035
JL057
C2012
C2068
C2136 R2014 11 1
CN001
D2000
R2085
C2004
FB2002
R2013 R2015
CN2001
C2063
C2084
C2079
IC2000
1
Q2006
13 12
FB2001
CN2007
Q2000
C2017
C2018
1 9 R2036 R2037 D2011
C2115
R2039 R2040
R2196 R2197
SMPS BOARD (AR, TH, E12, LA9) SMPS BOARD (AR, TH, E12, LA9)
CN303 CN120
1 5 6 2
SMPS (EMC) BOARD (AEP, UK, RU, MY, AUS, E4, E93) SMPS (EMC) BOARD (AEP, UK, RU, MY, AUS, E4, E93)
CN302
MHC-V42D
39 39
SYS SET
I
J
F
E
H
D
C
B
A
G
1
MHC-V42D
MHC-V42D
EXCEPT AEP, UK
2
JL005
IC004 IC006 JL011
1 2 1 2
C080
C051
R070 JL3005
R035 R029 JL3007
JL073 JL047 JL048 JL3006 JL3001
R060 JL3008
Q014
Q004
2019/03/05 00:47:46 (GMT+09:00)
R069
3 1 D3005
IC007 4 6
JL617
JL068 JL216 4 C3000
MOTHERBOARD BOARD
C671
Q012 JL206 C986
C3018
JL071
R015 JL196 JL198 JL200 JL201 JL215 JL203 JL204 IC3001
C678 C674 1 2
R720
C069
R018 C672
R066
R065
C062 C3019
R191
JL012 7 1
JL171 JL197 JL202
JL001 JL003 R064
C673
R723
JL199 JL235 JL125
JL008 JL173 JL205
JL108
Q011 JL172 IC609 R708
JL059 JL174 JL169 8 14
R068
JL195 C666
JL044 R722 R3015
CL2039 R719 R917
JL175 C667
4
R3014
R711 CL3010
JL176
C060 C675 R709
R3009
1
CL2038 JL105
3
4 6 JL069 JL131
JL132
IC010 FB110
R198 JL134
JL2033 JL153 JL297
R544
R050 C074
R543
R220
R545
R203
R110
JL135
R122 JL152
C299 R546 JL120 JL106
JL109 R195 JL117
R518 JL154
R552
JL118
JL116
JL122
JL155 JL151
JL289 C134 C138 JL115 JL119
C136 C144 C147 JL530
5
JL121
JL107
R551
C131 JL124 JL123
R145
R144
CL2004 C123 R152 R532
C122
R298
R256 R135
RB101
R134
R184
C120 R276
R249 JL529
R283
CL2010 C282 C283 JL521
C2128
R104
JL148 TH571
R177 C281
C160 JL522
R176 R149 C280 JL523
C159
JL2031
C117 JL520
C118
R123
CL2011
C2127 C158 JL140
R175
R131 JL139
R154
C2116
C115
C157 Q110
7 1
C155 JL141
R102 JL526
R137
JL194 JL230
R2147
JL150 IC102 RB105 Q111
R2146 C504 C156 JL231 JL232 C012
IC2003 R153 JL002
6
R140
C114
JL287 R240 C087
4
8 14 C070
C154
R103 RB104
R139
R507
R107
1
8
C008
R187
R293
R143
R222
R129 JL528
1
R170
JL143 IC002 3
RB106
R284
C502
4
R255
5
IC003 1
R515
6-9. PRINTED WIRING BOARD - MOTHERBOARD Board (Conductor Side) -
C153
C164
C111
R300
R274 JL525 R165 C095
JL142
R524
C503
R119
R254
R215
JL212 JL146 JL070
R514
R528
JL136
R1002
C501 R534
JL022
R028
R529
JL2039 CL2022 JL402 JL405 JL406
JL2034
JL023 JL401
CL2023
C066
JL326
JL312
JL328
CL2036 JL329
JL318
R429
JL324
C406
JL301
R316
C405
R2021 CL2035
C311
C424
JL2037
CL2020 C367
CL2021
JL320
JL310
CL2025
JL2040
R2022 JL460
Q402
JL306
JL308
JL463
15
JL314
R478 CL411
8
R304
21
R389 C404
C423 4 6 CL410
JL2008
C466
R432 C409
JL311 JL360
R314
C465 R451
IC401
30
R498
29
CL414
R412 R431 C991
CL2024
R418
40
R411
7
22
R435 CL413
CL409
C655 R406
JL313 C413 CL403
R950
R691
1
9
28
CL402
CL408
7 1
R783
C949 IC606
C646
C992
R687
8 14
24
13
R957
12
25
R778
R661
C640
R985 C617 JL2207
R690
R677
40
R984
R959
IC904 C622
JL2011 R982
R674
R785
R637
• See page 38 for Circuit Boards Location.
C695
R981 C648
1
JL2006
36
JL2016
R983
37
JL2005
C960 C985
C726
48
C981
•
R953 R955
R665
R664
C950 JL603
10
C954
R639
R660
JL356 R657
C951 C952
JL361 JL357
C316
JL358
C363
JL359 C336
R326
C331 C357
C319 C325 R348 R352 JL362
C330 L301 JL2203
C365
C328
C326
C350
C334 C369
R330 C358 JL2206
CL315 R339 C373
C338
6
JL355
C372
3
CL310 CL313 C340 R381
1
11
C321
R913
R911
C643
JL2200
CL316
R914
C344
CL311
JL2223
R671
C343
CL307
CL395
R382
C359
CL2042
R319
C657
C652
C351 CL308
CL2043
JL2035
C375
C347
C647
JL2020 JL330
R370 C352
C650
C346 JL2202
R309 C348 C364
JL2222
JL2026
C306
R857
CL380
R945
R2208
R947
C2217
Q302
JL604 JL605
JL2021 CL2044 CL2040
R1027
CL2045 R1025
R651
C1011
C687
C2227
R686
1
8
R689 R685
12
X900
R944
C934
R1017
Q605
20 6
5
R1022
C665 C660
C1009
L605
C933
C932
C931
1
5
C1010
R940 C2221
2
C930
C2223
R1026 JL619 R2206
L900
C2225
C639
C1005 C1013 R937
JL2030 CL2049 CL2048 CL2050
D900
C2151 JL111
1 2
CN900
JL110
JL2029
1-983-885-
11
FM
(11)
ANTENNA
14
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-10. PRINTED WIRING BOARD - PANEL Board (Except MY, E12), PANEL (PANA) Board (MY, E12) - • See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11
REC/PLAY 5V 1A
JS7000
(Page 39) MOTHERBOARD BOARD
6
CL7183
CN103
CL7171
>003P NO7009
CL7175
ND7000
VACUUM FLUORESCENT DISPLAY (Page 39)
4 1
>005P
CL7172 CL7173
CL7122
CL7121
CL7132
CL7126
NO7008 1
CL7170
CL7177
CL7135
C7066
C7027
C CL7120 Q7002 CL7113
C7060
JW7801
JW7820
C7031
C7061 CL7137
R7097
CL7131 CL7169
CL7119
R7061
CL7134 C7036 Q7001 CL7187 CL7186 CL7185 CL7184
R7099
CL7125 CL7124
R7059 CL7145
R7068 R7060
JW7828
C7039
GROUNDING
C7040
C7038
CL7143
JW7806
JW7836
R7069 TO MIC BOARD
C7032
C7033
R7058
CL7133
S7009 S7011 R7093 CL7147 CL7153
JW7804
C7034
JW7816
1 15
S7035 S7036 14
R7023 LP7002
JW7822
D7005
JW7837
2
CL7144 R7028
PARTY LIGHT R7013 SOUND FIELD C7041 CN7010 CL7157 CL7047
CL7148
D
JW7815
CL7146
JW7811
R7017
JW7809
CL7027
CL7030 CL7154
JW7800
S7014
S7050
JW7838
CL7038 S7016
R7100 JW7810 JW7817 VOICE CHANGER S7051
R7016
JW7805
CL7023
R7019
R7007
R7009
R7006 CL7072
S7019 D7010 S7023
R7117
CL7150
R7034
S7040 S7055
GESTURE ON/OFF VOLUME +
S7006
R7118
S7004 VOLUME -
S7045
H R7038 KARAOKE
S7000 CL7073 CL7152
S7044
S7022
CL7149 S7041
PLAYBACK S7025
S7024 S7026 S7056
S7042 S7043
DJ SAMPLER
CL7075
I
JW7833
R7040
S7029 S7027
S7002 S7001 S7058 S7057
S7031 S7030
TUNING – TUNING +
R7005
CL7074
R7043
R7041
J CL7020 R7004
CL7019
CL7078
CL7076
11
K 1-983-914- (11)
MHC-V42D
41 41
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-11. PRINTED WIRING BOARD - GESTURE Board (Component Side) - 6-12. PRINTED WIRING BOARD - GESTURE Board (Conductor Side) -
• See page 38 for Circuit Boards Location. • : Uses unleaded solder. • See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
B B 2
CN7500
6
1 7
CL7515
C C
D D
JL7501
R7505
R7504
JL7500
CL7507
CL7508
CL7518
JL7502 JL7504
2 6
CN7500 JL7503
E E
C7504
1 7
R7506
CL7519
CL7520
CL7521
R7514
CL7511
CL7510
JL7505
R7508
C7505
R7509
C7509
21 15
22 14
R7507 IC7500 CL7512
C7518
FB7510 28
R7519
R7516
8
C7515
CL7503 1 7
CL7509 C7516
C7506
C7503
CL7505
F F
R7517
CL7514
R7515
R7511
R7512
CL7504CL7506
R7520 CL7502 C7508
CL7501CL7500
CL7517 CL7513
G G
CL7516
H H
11 11
1-983-916- (11) 1-983-916- (11)
I I
MHC-V42D
42 42
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-13. PRINTED WIRING BOARD - SMPS Board (AR, TH, E12, LA9), SMPS (EMC) Board (AEP, UK, RU, MY, AUS, E4, E93) -
• See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 5 6 7 8 9 10 11 12
JW6001
C6309
D6303
C6305
C6502
C6557
R6503
F6000
Q6500
R6338
R6593
JL6300
C6522
R6544
R6541
C6521
R6512
Q6507
JL6557 JL6500 JL6306
R6540
B R6313
Q6307
PH6300
C6315
R6327
Q6506
JW6027
R6501 R6500
R6320 D6341
ET6501
JW6015
JL6527 R6542 R6323 R6341
C6312
JL6311
JL6546 R6546 JL6553 C6340
R6543
JL6529
JL6000
D6300
JW6004
JL6307
C6547
Q6510 IC6300
JW6016
R6551
R6336
C6318
D6515 JL6547 D6516 D6511 C6007
R6328
JL6312
(CHASSIS)
PH6302
Q6305
R6515 JW6034
R6545 JW6025
JL6551
1 4
JW6024
R6537 D6510
C6300
C6313
D6509
D6306
JL6530
JL6521 D6503
D6305
IC6500 JL6552
JL6308 D6521
Q6304
8 5
JL6001
R6321
R6572 R6571
R6334 C6307
JW6003
R6505 D6500
D6519
3
R6516 JL6525 R6339
PH6301
2 1
JL6561
VR6000
C6504
JL6550 C6317 CN6001
JW6031
R6570
R6325 JL6305
R6518
R6502 JL6560 D6340
C R6520 R6517
Q6306
R6307
C6537
JL6528 R6344
D6505
R6514 JL6522
TH6300
D6308 D6313 D6311 R6340
R6333
AC IN
D6502
R6525 C6511 R6324 D6520
JL6526
JL6535
LF6001
R6568 C6509 R6504 R6330
R6509
R6507
JW6012
R6508
JL6303
C6319
FB6301
JL6538
JW6017
T6300
JL6313
R6315
JW6013
JL6309
JW6019 JL6536 R6312
JL6002
JL6508
R6316
C6510
JL6304
JR6005
JR
JL6534
D6312
Q6301
JW6029 Q6302 C6311
JW6022 C6546
R6554
C6310
JW6036
R6335
R6306
C6524
D JW6007
Q6303
R6594
C6303
JW6008
A6932
JL6301
C6534
D6501
JL6544
JL6503
R6302
Q6300
R6319 JL6302
FB6300
JL6507
6
NO6501
D652
A6933 C6003
JS6011
JL6504
R6301
FB6505
C6320
12
12
JW6026
JL6512
C6545 C6549
JL6569
C6556
R6305
C6529
C6507
LF6000
JS6003
JS6006
JS6008
D6504
JL6520
JL6545 JW6030
E C6002
JL6542 R6583
R6300
R6303
FB6504
JS6001
JL6506
R6318
R6343
D6001 C6001
JL6543
C6523
R6326
R6329
R6579
C6558 JW6002
JL6541
NO6501
Q6509
C6515
3
FB6000
TH6000
R6577
C6314
JL6568
R6557
1
C6543 JW6009
C6561
F R6550 C6539
C6540
JS6509
JW6021 JL6519
C6514
JL6565
D6525
D6524
R6575
R6560
R6538
R6598
A6931
MOTHERBOARD BOARD
D6530
JW6011 R6549
JL6314
JL6564
CN001
JS6507
R6539
JL6511
FB6503
JL6310
JL6510 R6547
JW6035
R6595 C6513
JL6517 ET6000
ET6500 JL6514 R6548 JW6018
G JW6033
JL6516
R6535 R6523
C6321
(CHASSIS)
CN6500 1 9 JL6513 JW6014 (CHASSIS)
H
>009P
MOTHERBOARD BOARD
CN2007
(Page 39) 11
1-983-889- (11)
I
MHC-V42D
43 43
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-14. PRINTED WIRING BOARD - MIC Board (AR, TH, E12, LA9), MIC (EMC) Board (AEP, UK, RU, MY, AUS, E4, E93) -
• See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 5 6 7 8 9
B CL7721 >008P
J7701
MOTHERBOARD BOARD
CL7707
CN902
C7718
(Page 39)
MIC1 CL7723
CL7706
R7735
C CL7717
C7727
R7718 C7710 C7702
R7728 C7709 FB7701
CL7711
CL7712
CL7701
C7729 R7702 1 9
2 8
JW7709
C7722 C7713 R7713 CN7701
CL7704
C7733
C7715
C7716
CL7716
CL7702
J7702 D7706
Q7708
CL7720
R7705
C7707
5 8
CL7719
JW7705
D
CL7722 C7734 4 1 IC7701
MIC2
R7722
JW7701 R7724
GUITAR
C7714 R7714
R7734
CL7710
CL7703
R7723
C7726
CL7713
C7731
CL7718
CL7705
C7737
R7737
CL7715
FB7702 R7731
R7706
C7705
R7725
C7703
W7701
W7702
R7721
C7720
MHC-V42D
44 44
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-15. PRINTED WIRING BOARD - IR Board - 6-17. PRINTED WIRING BOARD - SW LED Board -
• See page 38 for Circuit Boards Location. • : Uses unleaded solder. • See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 1 2 3 4 5
CL7454
B B R8156
D8152
JL8151
CL7453
D8151 R8157 CN8151 MOTHERBOARD BOARD
CN107
IC7450 CL7455
JL8152
4
(Page 39)
2
C >004P
C
1
CL7451
NO7451
CL7450
3
R7450
11
CL7452
3 1
D 1-983-920- (11)
D
MOTHERBOARD BOARD
CN127
(Page 39)
>007P
E
11
1-983-943- (11)
NFC BOARD
A (COMPONENT SIDE)
MOTHERBOARD BOARD
CN105
IC001
C001
CN001
(Page 39)
C003
6
>006P
8
1
B C002
4
R002
R001
11
1-980-619- (11)
C
NFC BOARD
(CONDUCTOR SIDE)
11
E 1-980-619- (11)
MHC-V42D
45 45
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
6-18. PRINTED WIRING BOARD - FL PARTY Board - 6-19. PRINTED WIRING BOARD - FR PARTY Board -
• See page 38 for Circuit Boards Location. • : Uses unleaded solder. • See page 38 for Circuit Boards Location. • : Uses unleaded solder.
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
B B
R8005
D8051
D8053
D8055
D8003 D8001 D8004
C C
R8056
D 11 D 11
1-983-919- (11) 1-983-918- (11)
>002P
MOTHERBOARD BOARD
CN2206
F (Page 39) F
CL8005
CL8004
CL8051
CL8006 CL8007
4 1
6
G 5
G 5 6
CN8001
CN8052 1 4
CL8054
CL8053
CL8052
H H >001P
MOTHERBOARD BOARD
CN2206
(Page 39)
I 11 I 11
1-983-919- (11) 1-983-918- (11)
MHC-V42D
46 46
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 7
EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so • Color Indication of Appearance Parts Ex- The components identified by mark 0
they may have some difference from the ample: or dotted line with mark 0 are critical for
original one. KNOB, BALANCE (WHITE) . . . (RED) safety.
• Items marked “*” are not stocked since ↑ ↑ Replace only with part number specified.
they are seldom required for routine ser- Parts Color Cabinet’s Color
vice. Some delay should be anticipated
when ordering these items. The components identified by mark 9 con-
• The mechanical parts with no reference tain confidential information.
number in the exploded views are not sup- Strictly follow the instructions whenever the
plied. components are repaired and/or replaced.
#2
#2
1 #2
#1
#1
#1
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
0 1 4-726-159-01 PANEL, SIDE (L) #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
0 2 4-726-160-01 PANEL, SIDE (R) #2 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
47
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
ns
51
51
ns
54
52
ns
ND7000
60
51
ns
62
57 61
51
63
65
58
59
64
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 4-951-620-51 SCREW (2.6), +BVTP 59 4-726-148-01 BUTTON,START
52 A-2225-344-A PANEL MOUNTED PC BOARD (EXCEPT MY, E12) 60 4-726-149-01 BUTTON,DJ
52 A-5001-942-A PANEL MOUNTED PC BOARD (PANA) (MY, E12) 61 A-2225-347-A GESTURE MOUNTED PC BOARD
53 1-912-918-11 FLEXIBLE FLAT CABLE (15 CORE) 62 1-972-246-11 FLEXIBLE FLAT CABLE (6 CORE)
54 A-2225-345-A MIC MOUNTED PC BOARD (AR, TH, E12, LA9) 63 A-2194-756-A NFC MOUNT
54 A-5005-461-A MIC MOUNTED PC BOARD (EMC) 64 4-723-058-11 WINDOW, DISPLAY
(AEP, UK, RU, MY, AUS, E4, E93) 0 65 4-725-453-21 PANEL,TOP (AEP, UK)
55 1-912-998-11 FLEXIBLE FLAT CABLE (9 CORE) 0 65 4-725-453-11 PANEL,TOP (EXCEPT AEP, UK)
56 1-912-921-11 FLEXIBLE FLAT CABLE (7 CORE) ND7000 1-483-549-31 VACUUM FLUORESCENT DISPLAY
57 X-5000-081-1 BUTTON, GUITAR ASSY ns not supplied
58 X-2597-747-1 BUTTON, FIESTA ASSY
48
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
#1
103
ns
ns
ns
102
ns
101 ns
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
101 4-726-162-01 PANEL, LOADING #2 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
102 4-536-754-01 SPRING (LP)
103 4-588-651-01 LOADING, BASE ns not supplied
#1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
49
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
#1
#1
153 152
#1
ns
151
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
151 4-874-614-12 SCREW (1) (3.5X14), TAPPING #1 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
152 4-745-479-01 PANEL, REAR (EXCEPT AEP, UK)
152 4-745-479-11 PANEL, REAR (AEP, UK) ns not supplied
0 153 1-855-006-41 FAN, DC
50
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
#2
201
204
202 205
201 #2
ns ns
ns
203
ns
ns
front panel section
#2
ns
ns
ns
206
Note 1: When the MOTHERBOARD board is replaced, spread Note 2: When the complete MOTHERBOARD board is replaced,
the compound referring to “NOTE OF REPLACING THE be sure to refer to “DESTINATION SETTING METHOD”
IC2002 ON THE MOTHERBOARD BOARD AND THE on page 5.
MOTHERBOARD MOUNTED PC BOARD” on servicing
notes (page 6).
51
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
254
253
252 251
SP4
261
255
255
SP2
ns
260
#2
#2
256
ns
ns
ns
258 259
257
252 #2
#2
252
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
251 X-2597-804-1 PANEL, FRONT ASSY 259 4-747-179-01 FOOT, RUBBER
252 4-951-620-51 SCREW (2.6), +BVTP 260 4-745-428-01 FRONT, LENS L
253 A-2225-550-A IR MOUNTED PC BOARD
254 4-726-139-01 WINDOW, IR 261 4-745-429-01 FRONT, LENS R
255 4-986-971-12 +BV TAPPING SCREW TYPE-2 3.5 SP2 1-859-317-11 LOUDSPEAKER (4CM) (Tweeter: L-CH)
SP4 1-859-317-11 LOUDSPEAKER (4CM) (Tweeter: R-CH)
256 A-2225-349-A FR PARTY MOUNTED PC BOARD #2 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
257 A-2225-351-A SW LED MOUNTED PC BOARD ns not supplied
258 A-2225-350-A FL PARTY MOUNTED PC BOARD
52
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SP1
302
SP3
302
SP5
303
303
303
301 303
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
301 4-238-407-12 SCREW (1) (4X20), +BV TAPPING SP3 1-859-316-11 LOUDSPEAKER 8CM (Mid: R-CH)
302 4-874-614-12 SCREW (1) (3.5X14), TAPPING
303 4-747-179-01 FOOT, RUBBER SP1 1-859-316-11 LOUDSPEAKER 8CM (Mid: L-CH)
SP5 1-859-315-11 LOUDSPEAKER 25CM (Woofer)
53
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
352
355
355
351
352
ns 355
ns
355
353
353
354
354
ns
#2
ns
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
351 2-345-115-01 SCREW (S), FLOAT 355 4-533-382-01 INSULATOR
352 4-533-702-01 STEP SCREW
353 4-533-939-01 SPRING, INSULATOR (F) #2 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
354 4-533-940-01 SPRING, INSULATOR (R) ns not supplied
54
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
ns
ns
405
403
402
403
403
404
ns
ns
ns
MS-476 board
(ns)
406
ns
ns
407
ns
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
401 A-1937-669-D CDM90 ASSY (including MS-476 board) 406 1-972-245-11 FLEXIBLE FLAT CABLE (24 CORE)
402 3-087-599-01 INSULATOR SCREW 407 1-912-919-11 FLEXIBLE FLAT CABLE (5 CORE)
403 2-634-618-21 INSULATOR ns not supplied
0 404 A-2046-956-A SERVICE, OPTICAL DEVICE (7G)
405 4-418-987-01 SHEET (S76)
55
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
SECTION 8
FL PARTY FR PARTY
ELECTRICAL PARTS LIST
GESTURE IR MIC
MIC (EMC) MOTHERBOARD • Items marked “*” are not stocked since The components identified by mark 0
they are seldom required for routine ser- or dotted line with mark 0 are critical for
MS-476 NFC PANEL vice. safety.
PANEL (PANA) SMPS Some delay should be anticipated when Replace only with part number specified.
ordering these items.
SMPS (EMC) SW LED • SEMICONDUCTORS The components identified by mark 9 con-
In each case, u: µ, for example: tain confidential information.
Note:
uA. . : µA. . , uPA. . , µPA. . , Strictly follow the instructions whenever the
• Due to standardization, replacements in
uPB. . : µPB. . , uPC. . , µPC. . , components are repaired and/or replaced.
the parts list may be different from the
uPD. . : µPD. .
parts specified in the diagrams or the com-
• CAPACITORS
ponents used on the set.
uF: µF
• -XX and -X mean standardized parts, so
• COILS
they may have some difference from the
uH: µH
original one.
• RESISTORS When indicating parts by reference num-
All resistors are in ohms. ber, please include the board name.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
A-2225-350-A FL PARTY MOUNTED PC BOARD A-2225-344-A PANEL MOUNTED PC BOARD
************************** (EXCEPT MY, E12)
************************************************************* A-5001-942-A PANEL MOUNTED PC BOARD (PANA)
(MY, E12)
A-2225-349-A FR PARTY MOUNTED PC BOARD *****************************
************************** *************************************************************
*************************************************************
0 A-2226-524-A SMPS MOUNTED PC BOARD
A-2225-347-A GESTURE MOUNTED PC BOARD (AR, TH, E12, LA9)
************************** 0 A-2228-975-A SMPS MOUNTED PC BOARD (EMC)
************************************************************* (AEP, UK, RU, MY, AUS, E4, E93)
****************************
A-2225-550-A IR MOUNTED PC BOARD *************************************************************
********************
************************************************************* A-2225-351-A SW LED MOUNTED PC BOARD
************************
A-2225-345-A MIC MOUNTED PC BOARD *************************************************************
(AR, TH, E12, LA9)
A-5005-461-A MIC MOUNTED PC BOARD (EMC) MISCELLANEOUS
(AEP, UK, RU, MY, AUS, E4, E93) **************
**************************
************************************************************* 53 1-912-918-11 FLEXIBLE FLAT CABLE (15 CORE)
55 1-912-998-11 FLEXIBLE FLAT CABLE (9 CORE)
9 A-2228-423-A MOTHERBOARD MOUNTED PC BOARD 56 1-912-921-11 FLEXIBLE FLAT CABLE (7 CORE)
(for SERVICE) (EXCEPT AEP, UK) 62 1-972-246-11 FLEXIBLE FLAT CABLE (6 CORE)
9 A-2228-427-A MOTHERBOARD MOUNTED PC BOARD 0 153 1-855-006-41 FAN, DC
(for SERVICE) (AEP, UK)
******************************* 401 A-1937-669-D CDM90 ASSY (including MS-476 board)
0 404 A-2046-956-A SERVICE, OPTICAL DEVICE (7G)
< IC > 406 1-972-245-11 FLEXIBLE FLAT CABLE (24 CORE)
407 1-912-919-11 FLEXIBLE FLAT CABLE (5 CORE)
IC2001 6-723-247-01 IC TAS5534DGGR-S SP1 1-859-316-11 LOUDSPEAKER 8CM (Mid: L-CH)
IC2002 6-723-793-01 IC TAS5634
************************************************************* SP2 1-859-317-11 LOUDSPEAKER (4CM) (Tweeter: L-CH)
SP3 1-859-316-11 LOUDSPEAKER 8CM (Mid: R-CH)
MS-476 BOARD SP4 1-859-317-11 LOUDSPEAKER (4CM) (Tweeter: R-CH)
************ SP5 1-859-315-11 LOUDSPEAKER 25CM (Woofer)
*************************************************************
When the MS-476 board is defective, exchange the entire CDM90 ASSY.
*************************************************************
A-2194-756-A NFC MOUNT
**********
*************************************************************
Note 1: When the MOTHERBOARD board is replaced, spread Note 3: If flexible flat cable is replaced, install it after bending it in
the compound referring to “NOTE OF REPLACING THE the same form as that before replacement.
IC2002 ON THE MOTHERBOARD BOARD AND THE
MOTHERBOARD MOUNTED PC BOARD” on servicing
notes (page 6).
56
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
57
SYS SET
2019/03/05 00:47:46 (GMT+09:00)
MHC-V42D
REVISION HISTORY
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF file search function to find one.
SYS SET