Professional Documents
Culture Documents
San Cabo Specs - Full
San Cabo Specs - Full
Kitchen Faucet
TECHNICAL DETAILS
Deck Thickness Maximum: 3 11/16"
Deck Thickness Minimum: 1/4"
Fittings Hole Diameter: 1 3/8"
Flow Restriction Options: 1.75
Handle Turn Angle: Quarter Turn
Inlet Connection Size: 3/8"
Inlet Connection Type: Compression Connector Hoses
Restricted Maximum Flow Rate: 1.75 gpm
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
INSPIRATION
Influenced by the connection of industry and art Henry easily transitions between modern, traditional, utilitarian
and classic settings.
PRODUCT FEATURES
Metal Lever handle with pull down spray. Swivel spout.
Spray is operated by a sliding button that switched between aerated stream and jet spray. The button returns to
stream when water is turned off and stays locked in spray mode without having to hold it down. Sprayer face has
rubber nozzles for easy cleaning.
Spray head is held in place with a magnet and counter weight.
Spray head pivots to increase maneuverability when pulled out of the spout.
Island Faucet
TECHNICAL DETAILS
Deck Thickness Maximum: 3 11/16"
Deck Thickness Minimum: 1/4"
Fittings Hole Diameter: 1 3/8"
Flow Restriction Options: 1.75
Handle Turn Angle: Quarter Turn
Inlet Connection Size: 3/8"
Inlet Connection Type: Compression Connector Hoses
Restricted Maximum Flow Rate: 1.75 gpm
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
INSPIRATION
Influenced by the connection of industry and art Henry easily transitions between modern, traditional, utilitarian
and classic settings.
PRODUCT FEATURES
Metal Lever handle with pull down spray. Swivel spout.
Spray is operated by a sliding button that switched between aerated stream and jet spray. The button returns to
stream when water is turned off and stays locked in spray mode without having to hold it down. Sprayer face has
rubber nozzles for easy cleaning.
Spray head is held in place with a magnet and counter weight.
Spray head pivots to increase maneuverability when pulled out of the spout.
Prep Faucet
TECHNICAL DETAILS
Adjustable versus Fixed Spray: Adjustable Spray
Deck Thickness Maximum: 3 1/4"
Deck Thickness Minimum: 1/4"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Flow Restriction Options: 2.0, 1.75, 1.5
Handle Turn Angle: Quarter Turn
Handshower / Spray Hose Length: 49"
Depth / Width: 11 3/4"
Height: 17"
Inlet Connection Size: 3/8"
Inlet Connection Type: Compression Connector Hoses
Length: 11 3/4"
Primary Material: Brass
Restricted Maximum Flow Rate: 2.2 gpm
Spout Swivel: Y
Spray Included in Unit: Y
Suggested Application: Bar, Kitchen, Laundry
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 30.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN HENRY ONE HOLE GOOSENECK KITCHEN FAUCET WITH PULL-DOWN SPRAY AND METAL LEVER HANDLE|
PRODUCT FEATURES
The stately single hole fitting stands on a tall well formed pillar with a tapered lever handle. Practical as well a
beautiful, this fitting has a hand spray for washing vegetables, rinsing the sink or cleaning pots.
Spray features a trigger to switch between aerated stream and jet spray.
Spray is held in place with a counter weighted magnet.
Handle rotates toward the front to prevent contact with backsplash.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires a maximum of 1.8gpm(6.8 L/min). Also
Kitchen Bathroom
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
Laundry Room
TECHNICAL DETAILS
Deck Thickness Maximum: 3 11/16"
Deck Thickness Minimum: 1/4"
Fittings Hole Diameter: 1 3/8"
Flow Restriction Options: 1.75
Handle Turn Angle: Quarter Turn
Inlet Connection Size: 3/8"
Inlet Connection Type: Compression Connector Hoses
Restricted Maximum Flow Rate: 1.75 gpm
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
INSPIRATION
Influenced by the connection of industry and art Henry easily transitions between modern, traditional, utilitarian
and classic settings.
PRODUCT FEATURES
Metal Lever handle with pull down spray. Swivel spout.
Spray is operated by a sliding button that switched between aerated stream and jet spray. The button returns to
stream when water is turned off and stays locked in spray mode without having to hold it down. Sprayer face has
rubber nozzles for easy cleaning.
Spray head is held in place with a magnet and counter weight.
Spray head pivots to increase maneuverability when pulled out of the spout.
Staff Room
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
TECHNICAL DETAILS
ADA Compliance: Yes
Diameter of Head: 6"
Flow Restriction Options: 2.0, 1.75, 1.5
Depth / Width: 5 15/16"
Height: 3 3/16"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Integrated Diverter: N
Length: 5 15/16"
Primary Material: Brass
Suggested Application: Bath
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
Our Universal collection features timeless designs complementing any of our Waterworks. With a
wide range of product, from fittings to accessories, Universal adds exquisite proportion and balance
to any environment.
02.07.23
UNIVERSAL USF300
Component Only Universal Transitional Shower Flange
02.07.23
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 2 7/8"
Control Valve Rough-in Depth Minimum: 2 3/8"
Diverter Valve Rough-in Depth Maximum: 3 5/8"
Diverter Valve Rough-in Depth Minimum: 3 1/8"
Fittings Hole Diameter: 3 1/2"
Depth / Width: 3 1/16"
Height: 6 1/8"
Integrated Diverter: N
Integrated Spray: N
Length: 5 1/2"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY PRESSURE BALANCE WITH DIVERTER TRIM WITH METAL LEVER HANDLE| HNPB30
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Brass material is used for components
SHOWN IN VIAWORKS 1/2" PRESSURE BALANCE VALVE WITH INTEGRATED DIVERTER FOR TUB/SHOWER COMBINATION |
GUPB87
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUPB87: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, cUPC, and ADA. Certified with IAPMO,
performance, features and functionality. ViaWorks valves are engineered with more than three State of MA.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Do not use the bottom (tub) outlet of this product for any fittings with restricted flow, such as a
handshower or body spray. The back pressure created would cause water to flow out through the The risk of scalding exists until the installer has properly
top (shower) outlet. The integrated diverter on the GUPB87 would also malfunction. set the temperature high limit stop screw.
Single handle ON/OFF with tempature control
06.28.22
VIAWORKS GUPB87
ViaWorks 1/2" Pressure Balance Valve with Integrated
Diverter for Tub/Shower Combination
06.28.22
TECHNICAL DETAILS
Adjustable versus Fixed Spray: Fixed Spray
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 1/4"
Depth / Width: 7 1/16"
Height: 2 7/8"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Integrated Diverter: N
Integrated Spray: N
Length: 2 7/8"
Number of Holes: One Hole
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Brass material is used for components
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
Bunk Room
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY EXPOSED THERMOSTATIC SHOWER SYSTEM WITH 8" SHOWER HEAD, HANDSHOWER, METAL LEVER DIVERTER
HANDLE, METAL LEVER AND CROSS HANDLE | HNXS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNXS70X: Certified with CEC.
traditional, utilitarian and classic settings.
The Shower Riser is designed to be field cut to accommodate varying shower heights. The exposed
diverter body can be installed with the handshower elbow on the right or the left.
Stocked in Nickel, Chrome, Unlacquered Brass, and Matte Nickel finishes
Standard flow rate is 2.5gpm (9.5 L/min). Also available in high efficient flow options. Contact your
sales associate or call 1 (800) 899-6757 for details.
01.17.23
HENRY HNXS70
Henry Exposed Thermostatic Shower System with 8" Shower
Head, Handshower, Metal Lever Diverter Handle, Metal
Lever and Cross Handle
01.17.23
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY EXPOSED THERMOSTATIC SHOWER SYSTEM WITH 8" SHOWER HEAD, HANDSHOWER, METAL LEVER DIVERTER
HANDLE, METAL LEVER AND CROSS HANDLE | HNXS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNXS70X: Certified with CEC.
traditional, utilitarian and classic settings.
The Shower Riser is designed to be field cut to accommodate varying shower heights. The exposed
diverter body can be installed with the handshower elbow on the right or the left.
Stocked in Nickel, Chrome, Unlacquered Brass, and Matte Nickel finishes
Standard flow rate is 2.5gpm (9.5 L/min). Also available in high efficient flow options. Contact your
sales associate or call 1 (800) 899-6757 for details.
01.17.23
HENRY HNXS70
Henry Exposed Thermostatic Shower System with 8" Shower
Head, Handshower, Metal Lever Diverter Handle, Metal
Lever and Cross Handle
01.17.23
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
Pool Bath
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
TECHNICAL DETAILS
ADA Compliance: No
Adjustable versus Fixed Spray: Fixed Spray
Diameter of Head: 8"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 1/4"
Flow Restriction Options: 2.5, 2.0, 1.75, 1.5
Depth / Width: 7 7/8"
Height: 11 5/16"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Ceiling Mounted
Integrated Diverter: N
Integrated Spray: N
Length: 7 7/8"
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN HENRY CEILING MOUNTED 8" SHOWER ROSE, ARM AND FLANGE| HNSH30
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6 L/min) to comply
with their water conservation requirements. Other flow options are available to order, contact your sales associate
or call 1 (800) 899-6757 for details.
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
SHOWN IN HENRY EXPOSED FLOOR MOUNTED TUB FILLER WITH HANDSHOWER AND METAL LEVER HANDLES | HNXT70
Influenced by the connection of industry and art Henry easily transitions between modern, Complies with ASME A112.18.1/CSA B125.1 and ADA.
traditional, utilitarian and classic settings. Certified with CEC, State of MA, and WRAS.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min) for Handshower. State of California requires
1.75gpm (6.6 L/min) to comply with their water conservation requirements. Other flow options are
available to order, contact your sales associate or call 1 (800) 899-6757 for details
06.13.22
HENRY HNXT70
Henry Exposed Floor Mounted Tub Filler with Handshower
and Metal Lever Handles
06.13.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 2 7/8"
Control Valve Rough-in Depth Minimum: 2 3/8"
Diverter Valve Rough-in Depth Maximum: 3 5/8"
Diverter Valve Rough-in Depth Minimum: 3 1/8"
Fittings Hole Diameter: 3 1/2"
Depth / Width: 3 1/16"
Height: 6 1/8"
Integrated Diverter: N
Integrated Spray: N
Length: 5 1/2"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY PRESSURE BALANCE CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNPB10
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Brass material is used for components.
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUPB81: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, cUPC, and ADA. Certified with IAPMO,
performance, features and functionality. ViaWorks valves are engineered with more than three State of MA.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Do not use the bottom (tub) outlet of this product for any fittings with restricted flow, such as a
handshower or body spray. The back pressure created would cause water to flow out through the The risk of scalding exists until the installer has properly
top (shower) outlet. set the temperature high limit stop screw.
Single handle ON/OFF with tempature control
06.28.22
VIAWORKS GUPB81
ViaWorks 1/2" Pressure Balance Valve
06.28.22
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
TECHNICAL DETAILS
ADA Compliance: No
Adjustable versus Fixed Spray: Fixed Spray
Diameter of Head: 8"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 1/4"
Flow Restriction Options: 2.5, 2.0, 1.75, 1.5
Depth / Width: 7 7/8"
Height: 11 5/16"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Ceiling Mounted
Integrated Diverter: N
Integrated Spray: N
Length: 7 7/8"
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN HENRY CEILING MOUNTED 8" SHOWER ROSE, ARM AND FLANGE| HNSH30
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6 L/min) to comply
with their water conservation requirements. Other flow options are available to order, contact your sales associate
or call 1 (800) 899-6757 for details.
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
SHOWN IN HENRY EXPOSED FLOOR MOUNTED TUB FILLER WITH HANDSHOWER AND METAL LEVER HANDLES | HNXT70
Influenced by the connection of industry and art Henry easily transitions between modern, Complies with ASME A112.18.1/CSA B125.1 and ADA.
traditional, utilitarian and classic settings. Certified with CEC, State of MA, and WRAS.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min) for Handshower. State of California requires
1.75gpm (6.6 L/min) to comply with their water conservation requirements. Other flow options are
available to order, contact your sales associate or call 1 (800) 899-6757 for details
06.13.22
HENRY HNXT70
Henry Exposed Floor Mounted Tub Filler with Handshower
and Metal Lever Handles
06.13.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 2 7/8"
Control Valve Rough-in Depth Minimum: 2 3/8"
Diverter Valve Rough-in Depth Maximum: 3 5/8"
Diverter Valve Rough-in Depth Minimum: 3 1/8"
Fittings Hole Diameter: 3 1/2"
Depth / Width: 3 1/16"
Height: 6 1/8"
Integrated Diverter: N
Integrated Spray: N
Length: 5 1/2"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY PRESSURE BALANCE CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNPB10
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Brass material is used for components.
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUPB81: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, cUPC, and ADA. Certified with IAPMO,
performance, features and functionality. ViaWorks valves are engineered with more than three State of MA.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Do not use the bottom (tub) outlet of this product for any fittings with restricted flow, such as a
handshower or body spray. The back pressure created would cause water to flow out through the The risk of scalding exists until the installer has properly
top (shower) outlet. set the temperature high limit stop screw.
Single handle ON/OFF with tempature control
06.28.22
VIAWORKS GUPB81
ViaWorks 1/2" Pressure Balance Valve
06.28.22
SHOWN IN HENRY WALL MOUNTED LAVATORY FAUCET WITH LEVER HANDLES | HNLS70
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNLS70X: Complies with NSF 61/NSF 372 and
traditional, utilitarian and classic settings. ADA. Certified with NSF, CEC, DOE, State of MA, and
WRAS.
Standard flow rate is 2.2gpm (8.3 L/min) and State of California requires 1.2gpm(4.5 L/min). Also
available in other flow options. Contact a sales associate for details.
04.29.22
HENRY HNLS70
Henry Wall Mounted Lavatory Faucet with Lever Handles
04.29.22
ADA Compliance: No
Depth/Width: 6"
Fittings Hole Diameter: 1 3/8"
Handle Spread Maximum: 8"
Handle Spread Minimum: 8"
Handle Turn Angle: Quarter Turn
Height: 2 3/4"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Wall Mounted
Length: 10"
Outlet Connection Size: 1/2"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 1/2" LAVATORY WALL MOUNTED VALVE (USED WITH LEVER HANDLE LAVATORY FAUCETS) | GULV25
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV25: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, NSF 61, NSF 372, CEC and 0.25% Weighted
performance, features and functionality. ViaWorks valves are engineered with more than three Average Lead Content. Certified with IAPMO, cUPC, NSF,
generations of bath and kitchen expertise, each with installers and lifelong service in mind. CEC, UL, State of MA and WRAS.
This counter-clockwise open and clockwise open cartridge rough is for use with Waterworks lever
handled wall mounted faucets
1/2" NPT male inlet and 1/2" NPT female outlet, with quarter turn functionality
06.28.22
VIAWORKS GULV25
ViaWorks 1/2" Lavatory Wall Mounted Valve (Used with
Lever Handle Lavatory Faucets)
06.28.22
TECHNICAL DETAILS
ADA Compliance: When installed per ADA guidelines
Escutcheon Primary Material: Brass
Depth / Width: 16 13/16"
Height: 6 1/8"
Inlet Connection Size: 1 1/2"
Inlet Connection Type: Compression
Length: 3 3/8"
Outlet Connection Size: 1 1/2"
Outlet Connection Type: Compression
Primary Material: Brass
Suggested Application: Bath
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
TECHNICAL DETAILS
ADA Compliance: No
Adjustable versus Fixed Spray: Fixed Spray
Diameter of Head: 8"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 1/4"
Flow Restriction Options: 2.5, 2.0, 1.75, 1.5
Depth / Width: 7 7/8"
Height: 11 5/16"
Inlet Connection Size: 1/2"
Inlet Connection Type: Female NPT
Installation Type: Ceiling Mounted
Integrated Diverter: N
Integrated Spray: N
Length: 7 7/8"
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN HENRY CEILING MOUNTED 8" SHOWER ROSE, ARM AND FLANGE| HNSH30
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6 L/min) to comply
with their water conservation requirements. Other flow options are available to order, contact your sales associate
or call 1 (800) 899-6757 for details.
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNHS010: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, CEC, State
of MA, and WRAS.
Stocked in 2.5gpm (9.5 L/min) and 1.75gpm (6.6 L/min). State of California requires 1.75gpm (6.6
L/min) to comply with their water conservation requirements. Other flow options are available to
order, contact your sales associate or call 1 (800) 899-6757 for details
02.08.23
HENRY HNHS10
Henry Handshower On Bar
02.08.23
SHOWN IN HENRY THERMOSTATIC CONTROL VALVE TRIM WITH METAL LEVER HANDLE | HNTH10
Influenced by the connection of industry and art Henry easily transitions between modern, Code # HNSV10X: Complies with ASME A112.18.1/CSA
traditional, utilitarian and classic settings. B125.1, cUPC, and ADA. Certified with IAPMO, State of MA.
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
02.20.23
HENRY HNTH10
Henry Thermostatic Control Valve Trim with Metal Lever
Handle
02.20.23
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSV37R: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, and ADA. Certified with CSA, State of
performance, features and functionality. ViaWorks valves are engineered with more than three MA, and WRAS.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Unique flush plate to clear consturction debris before thermostatic cartridge is installed
06.28.22
VIAWORKS GUTH37
ViaWorks 3/4" Thermostatic Valve
06.28.22
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 3 3/4"
Control Valve Rough-in Depth Minimum: 2 1/2"
Escutcheon Primary Material: Brass
Fittings Hole Diameter: 1 3/8"
Depth / Width: 2 15/16"
Height: 4 9/16"
Integrated Diverter: N
Integrated Spray: N
Length: 2 3/8"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY VOLUME CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNVC50
Depth/Width: 5 1/2"
Fittings Hole Diameter: 1 3/8"
Handle Turn Angle: Quarter Turn
Height: 3"
Inlet Connection Size: 3/4"
Inlet Connection Type: Female NPT
Length: 1 1/4"
Outlet Connection Size: 3/4"
Outlet Connection Type: Female NPT
Primary Material: Brass
Suggested Application: Bath
Valve Material: Ceramic
Water Pressure Maximum: 85.0 psi
Water Pressure Minimum: 20.0 psi
Water Pressure Recommended: 45.0 psi
SHOWN IN VIAWORKS 3/4" COUNTER-CLOCKWISE OPEN VOLUME CONTROL VALVE WITH EXACT HANDLE ALIGNMENT | GUVC16
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUSM16: ASME A112.18.1, CSA B125, State of Ma,
engineered as our legendary fittings and the finest the industry has to offer in terms of IAPMO
performance, features and functionality. ViaWorks valves are engineered with more than three
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Customize your bath experience with a counter-clockwise open cartridge rough, for use with
Waterworks wall valve trims.
3/4" NPT female inlet and outlet with quarter turn functionality
Custom tile guard ensures precise tiling, while providing accessibility in servicing the valve.
Combine multiple volume control valves within a single shower to operate multiple shower
components simultaneously
Made in Europe of Brass Construction
06.28.22
VIAWORKS GUVC16
ViaWorks 3/4" Counter-Clockwise Open Volume Control
Valve with Exact Handle Alignment
06.28.22
TECHNICAL DETAILS
Adjustable Levelers / Feet: N
Adjustable Shelves: N
Drain Style: Tile-In Channel
Garbage Disposal: N
Depth / Width: 8 1/4"
Height: 3 1/4"
Integrated Diverter: N
Integrated Sensor Disk: N
Integrated Spray: N
Interior Finish of Trapway: N
Length: 31 1/2"
Outlet Connection Size: 2"
Outlet Connection Type: No Hub
Pivot: N
Primary Material: Stainless Steel
Sink Visibility: N
Sound Proofing: N
Spout Swivel: N
Spray Included in Unit: N
Stain Resistance: N
Suggested Application: Bath
INSPIRATION
Our Universal collection features timeless designs complementing any of our Waterworks. With
a wide range of product, from fittings to accessories, Universal adds exquisite proportion and
balance to any environment.
SHOWN IN HENRY 3 1/2" SHOWERHEAD WITH ADJUSTABLE SPRAY WITH 8" WALL MOUNTED 45 DEGREE SHOWER ARM | HNS345
Influenced by the connection of industry and art Henry easily transitions between modern,
traditional, utilitarian and classic settings.
Made of Brass
01.31.23
HENRY HNS345
Henry 3 1/2" Showerhead with Adjustable Spray with 8" Wall
Mounted 45 Degree Shower Arm
01.31.23
TECHNICAL DETAILS
ADA Compliance: Yes
Control Valve Rough-in Depth Maximum: 2 7/8"
Control Valve Rough-in Depth Minimum: 2 3/8"
Diverter Valve Rough-in Depth Maximum: 3 5/8"
Diverter Valve Rough-in Depth Minimum: 3 1/8"
Fittings Hole Diameter: 3 1/2"
Depth / Width: 3 1/16"
Height: 6 1/8"
Integrated Diverter: N
Integrated Spray: N
Length: 5 1/2"
Number of Handles: One
Pivot: N
Primary Material: Brass
Spout Swivel: N
Spray Included in Unit: N
Suggested Application: Bath
SHOWN IN HENRY PRESSURE BALANCE CONTROL VALVE TRIM WITH METAL LEVER HANDLE| HNPB10
PRODUCT FEATURES
The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.
Brass material is used for components.
The ViaWorks collection encompasses all Waterworks valves, which are just as impeccably Code # GUPB81: Complies with ASME A112.18.1/CSA
engineered as our legendary fittings and the finest the industry has to offer in terms of B125.1, ASSE 1016, cUPC, and ADA. Certified with IAPMO,
performance, features and functionality. ViaWorks valves are engineered with more than three State of MA.
generations of bath and kitchen expertise, each with installers and lifelong service in mind.
Do not use the bottom (tub) outlet of this product for any fittings with restricted flow, such as a
handshower or body spray. The back pressure created would cause water to flow out through the The risk of scalding exists until the installer has properly
top (shower) outlet. set the temperature high limit stop screw.
Single handle ON/OFF with tempature control
06.28.22
VIAWORKS GUPB81
ViaWorks 1/2" Pressure Balance Valve
06.28.22