Professional Documents
Culture Documents
Ligar Aquecedores PRO 8100
Ligar Aquecedores PRO 8100
Installation
These heaters are options and require installation.
There are no switches for these tray heaters.
Their operation depends on how they are connected to the AC drive board.
Please explain to the operator that while the heaters can effectively reduce collection of
moisture in the paper trays, they will consume slightly more power.
Screws [1] and [2] are the 3rd and 5th screws from the top.
1. Open the controller box. page 4-27
SM 2-47 D179/D180/D181
Main Machine
Lower Heater
D179/D180/D181 2-48 SM
Main Machine
Installation
4. At the rear, connect the harness [A] ( x1, x1).
5. Re-attach the lift motor ( x2, x1).
Upper Heater
1. Remove the tandem tray (Tray 1). page 4-225
SM 2-49 D179/D180/D181
Main Machine
D179/D180/D181 2-50 SM
Main Machine
Heater Connections
Installation
1. Locate the bank of white connectors on the back of the AC drive board.
2. Locate the harness for the bank heaters and LCIT heater.
3. Plug the connector into plug [B].
The plug can be plugged into either [A] or [B]. The plug you choose determines how the
two paper bank tray heaters and LCIT tray heater work together.
SM 2-51 D179/D180/D181
Main Machine
Plug the connector into [A] only if the work site is extremely humid.
More about AC Drive Board Connectors
Here is a summary of the function of all these connectors on the end of the AC drive board.
D179/D180/D181 2-52 SM
Main Machine
1 Main SW_IN
2 Main SW_OUT
Installation
5 Fusing Lamp 4 (N): White
Anti-condensation heater (RLY switching): Paper bank upper, Paper bank lower,
9
LCT heater
Anti-condensation heater (always ON): Paper bank upper, Paper bank lower, LCT
10
heater
SM 2-53 D179/D180/D181