Professional Documents
Culture Documents
KM Sl502r S Installation Manual - PDF 10294
KM Sl502r S Installation Manual - PDF 10294
KM-SL502R-S
Lock Structure
Installation Notes
Installation Notes
Installation Steps
1. Open holes on the door according to the bore hole diagram,
opening direction:
4. Install the connecting screw stud on the front lock, then put the
square rod on the front lock directly into the square rod hole on
the mortise, making the front lock panel close to the door:
6. Connect the front lock wire and the back lock wire well, and tuck
the extra wires into the door hole, then cover the back lock panel,
with the screw studs of the front lock, do not tighten them yet:
8. Adjust the upper, lower, left and right position of the front lock
and back lock panel, and test the flexibility of the handle and
installed successfully:
10. Press the front lock and back lock handle, twist the privacy knob
and the mechanical key, and then check whether all parts are