Professional Documents
Culture Documents
LCD Datasheet LQ150X1LG92
LCD Datasheet LQ150X1LG92
液晶屏规格书
LCD Datasheet
编 辑 审 核 批 准
本技术规格如有更改,恕不另行通知
This technical specification is subjected to change without notice
目录 Table of Contents
特征 Feature 规格 Spec
尺寸 Size 15.0inch
机械参数
AA 区 Active Area (L x W) (mm) 304.1×228.1
Mechanical Characteristic
重量 Weight 1000g
电气特性
色深 Color Depth -
Electrical Characteristics
驱动 IC Driver IC -
备注:
符合最新 RoHS 指令要求/ Requirements on Environmental Protection : RoHS
电源电压
VCC 3.0 3.3 3.6 V
Supply voltage
电流消耗
ICC VCC=3.3V - 425 700 mA
Current dissipation
允许输入纹波电压
VRF - - 100 mVP-P Vcc=3.3V
Permissive input ripple voltage
VI=+2.4V
IOH - - ±10 μA
输入电流 VCC=3.6V
Input current
VI=0V
IOL - - ±10 μA
VCC=3.6V
终端电阻 Differential
RT - 100 - Ω
Terminal resistor input
工作电压
VLB - 26.1 31.5 V
Light Bar Operation Voltage
工作电流
IRLED - 240 - mA
LED Operation Current
背光消耗
PBLU - 7.6 -
BLU Power consumption
寿命
L 20000 30000 - h 【Reference】
Life time
对比度
CR θ=0° 250 350 -
Contrast ratio
响应时间 Rise Tr -- 5 20 ms
Response
Time Fall Td - 20 40 ms
亮度
YL1 700 875 cd/㎡
Luminance of white -
备注 1 :光学测量系统的定义
光学测试必须在暗室中进行,液晶屏点亮五分钟后开始测试,测试液晶屏的显示中心,
备注 2:视角范围和测量定义。
通过 BM-5A 在 LCD 中心点测量视角。
Note 2: Definition of viewing angle range and measurement system.
The viewing angle is measured at the center point of the LCD by BM-5A。
备注 3:色温定义。
光源的辐射在可见区和绝对黑体的辐射完全相同时,此时黑体的温度就称此光源的色温。色温是衡量
光源颜色(冷色,暖色)程度的一种指标。
暖色<3300K;中间色 3300~5000K;冷色>5000K。
Note 3: When the radiation of the light source is exactly the same in the visible region and the
absolute blackbody, the temperature of the blackbody is called the color temperature of the light
source.Color temperature is an index to measure the degree of light source color (cold color, warm
color).
Warm color < 3300K, intermediate color 3300 ~ 5000K, cold color > 5000K.
备注 4:响应时间定义。
响应时间被定义为“ 白”状态和“ 黑”状态之间的 LCD 光学切换时间间隔。 上升时间(TON)是
光电探测器输出强度从 90%变为 10%之间的时间。下降时间(TOFF)是光电检测器输出强度从 10%
DWIN Technologies 11 www.dwin.com.cn
Professional, Creditable, Successful LQ150X1LG92
变为 90%之间的时间。
Note 4: The response time is defined as the LCD optical switching time interval between “White”
state and “ Black ” state. Rise time (TON) is the time between photo detector output intensity
changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity
changed from 10% to 90%.
备注 5:色度定义。
LCD 中心测得的色坐标。
Note 5: Definition of color chromaticity (CIE1931) .
Color coordinates measured at center point of LCD.
备注 6:亮度定义。
在中心点测量白色状态的亮度。
Note 6: Definition of Luminance .
Measure the luminance of white state at center point.
高温工作 IEC60068-2-1:2007
1 Ta=70℃,240hours
High Temperature Operation GB2423.2-2008
低温工作 IEC60068-2-1:2007
2 Ta=20℃,240hours
Low Temperature Operation GB2423.1-2008
高温存储 IEC60068-2-1:2007
3 Ta=80℃,240hours
High Temperature Storage GB2423.2-2008
低温存储 IEC60068-2-1:2007
4 Ta=-30℃,240hours
Low Temperature Storage GB2423.1-2008
高温高湿
IEC60068-2-78 :2001
5 Storage at High Temperature Ta=40℃,95% RH max,240hours
GB/T2423.3-2006
and Humidity
Start with cold
temperature,
冷热冲击验证(非操作状态) End with high
6 -30℃ 30 min~+70℃ ,5Cycle
Thermal Shock (non-operation) temperature,
IEC60068-2-14:1984,
GB 2423.22-2002
<Sin wave>
Frequency :10~57Hz/Vibration width (one
振动试验 side) :0.076mm IEC60068-2-6:1982
7
Vibration Test :58~500Hz/Gravity:9.8m/s2 GB/T 2423.10-1995
Sweep time:11minutes
Test period:3H(X,Y,Z direction 1H)
Max. gravity:490m/s²
冲击试验(非操作状态) Pulse width:11ms,sine wave IEC60068-2-27:1987
8
Mechanical Shock (Non OP) Direction:±X,±Y,±Z Test period :1time/ GB/T 2423.5-1995
1direction
包装说明(Packing instruction):
液晶屏套上 PE 静电袋,紧凑装配,放入挡格中,挡格上下层使用缓冲空格保护。
The LCD is placed in the grid ,covered with a PE static bag and compactly assembled,the
upper and the lower layers of the grid are protected by buffer spaces.