Professional Documents
Culture Documents
Method Statement Regulating Valve
Method Statement Regulating Valve
Method Statement Regulating Valve
Obje ctive
The objective of this method statement is to provide general guidelines for calibrating
double regulating valve at customer’s premises.
Scope
Reference Procedure
Master Equipment
Test
Check the regulating valve and flow line physical condition and make
sure it is free from defects.
Note the valve details like make, model, serial no., location, ID No., etc.
on the relevant worksheet.
Page. 1 of 2
Connect the pressure gauge to first flow line.
Exercise the regulator with open position of 25%, 50%, 75% and 100%
range of its maximum rotation limit.
Observe the pressure gauge reading on the flow line.
Note down the pressure readings at each step of valve position on its
relevant work sheet.
Connect the pressure gauge to second flow line and repeat the steps as
mentioned above.
Complete the test and paste the identification sticker on the appropriate
part of the valve.
Page. 2 of 2