Professional Documents
Culture Documents
Air Conditioning Owners Manual Levante
Air Conditioning Owners Manual Levante
Buttons
Press this button to activate Press this button to activate Press this button to activate air
the fans and air renovation in all ventilation; recirculation. Air recirculation is
compartments; deactivated automatically;
Green LED: ventilation activated;
Green LED: Automatic mode on; Green LED: Recirculation activated;
Press this button again to move
The LED turns itself off when forward to the next compartment. Press AUTO button to end this
you change the settings for a mode; the LED turns turns off;
compartment;
Air renovation can be manually
Recirculation and reheating are adjusted for each compartment.
deactivated in this mode;
Buttons
"REHEATING" "MENU"
Knob
Menu layout
1
The menu layout for the control panel
is divided in four levels. The icons INITIAL MENU
displayed depend on the bus setup
and the number of options.
2
MAIN MENU
3
SETTINGS MENU COMPARTMENT MENU
4
INFO COOLING FINS
Initial menu
Menu functions:
Main menu
The main menu allow to open the
compartments menu and the settings
menu.
The icons available depend on the
configuration of your bus.
1 2 3
Pos. Description
1 Previous option
2 Selected option
3 Next option
Compartment menu
Pos. Icon Description
This menu is composed by two
A --- Viewing area sections: viewing section and action
section. In the action menu it's
B --- Action area possible to open more submenus.
Current operational
Operational
1 state
state for the selected
compartment
Off
Ventilate
Refrigerate
2 A B
Heat
1 2 3
Reheat/Defrost
Error
Pos. Description
1 Current compartment
1 2 4 2 Current interior temperature
4 Temperature set
1 3 4
66 No 254-066-0084 VEHICLE OWNER’S MANUAL
CB254-A
LEVAN TE III INTERIOR CONTROLS: AIR CONDITIONING
Refrigeration mode
In this mode, the fans can not be
turned off, but work with low speed.
This guarantees that the evaporator
won't freeze while the compressor is
working.
NOTE: 1 2 3
1-6 where
1 Current compartment
1=minimum and 6=maximum 2 Operational state of the AC
system
AUTO = Automatic mode
3 Fan speed set
3 Cooling fins
Automatic = the
cooling fins are
automatically set in
the ideal position
for the current
operational state
1 2 3 Fresh air = the
cooling fins are open,
so that the cool air
enters the bus
Recirculation =
the cooling fins are
closed. The air flows
inside the bus, there
is no suply of air from
the outside
1 2 3 4
Pos. Description
1 Current compartment
Pos. Description
1 Current compartment
Inferior
The fan is directed to
the feet areas
Troubleshooting
If the red LED in the AUTO button is
on, this indicates the ocurrance of a
serious error in the system. Usually,
this means that the AC compressor
was turned off in between a 10
minutes period after more than three
pressure errors (overpressure or
underpressure).