Professional Documents
Culture Documents
JSA 004 Sand Blasting of Exposed Rebar
JSA 004 Sand Blasting of Exposed Rebar
Job
Description of Job Steps Potential Hazards Control Measures
Step
a) Always check equipment (compressor, blasting pot, air vessel) and tools (noozle, whipchecks, hose) in good con-
1. Defective hose & connection dition prior use. Replace any damaged equipment/tools.
Equipment and material prepara- 2. Defect on equipment / tools b) Check breathing meter filter gauge to see filter in good condition
1.
tion for sand blasting activity 3. Defect on blasting suit
4. Area not well illuminated c) Ensure blasting suit still in tack and good condition
d) Install canvas around the blasting area to protect from other workers in vicinity
a) Always check connection and blasting suit prior start operating of equipment
1. Whipping of lose hose.
b) Only trained person to do blasting works
2. Dust
c) Standby person to monitor connection
3. Noise.
2. Sand Blasting work d) Blaster shall wear N95 dust mask and earplug in blasting suit
4. Operator fatigue.
e) Minimum of 40 minutes, maximum 60 minutes for continuous blasting works. On working shift system, maximum
5. Breathing hose / blasting suit contain
of 3 times per person to enter and conduct sandblasting. Rest minimum 30 minutes per round.
water
f) Always check breathing apparatus and filter for any wet leakage from compressor
1. Fall overboard a) All personnel to wear flotation device. (work vest/life jacket)
Housekeeping 2. Pinch point. b) Beware of hand placement and movement.
4.
3. Slip, trip and fall c) No horseplay
d) Apply buddy system
POSITION
SIGNATURE &
DATE
Page 1 of 1