Professional Documents
Culture Documents
Piping Symbols Library Version 1
Piping Symbols Library Version 1
2
compatible with AutoCAD and AutoCAD LT versions 2000 through 2008
With a couple clicks of the mouse, you'll be able to quickly insert the symbols you need to
generate piping layouts with ease. Utilizing a pull down menu and dialog boxes, this
comprehensive block library contains 9,400 piping symbols and organizes them for easy and
instant access.
It's easy to use:
This library can be easily loaded into AutoCAD or AutoCAD LT's menu bar for quick access.
Full instructions are included. There's no need to browse through folders every time you
need to insert a symbol. Its user-friendly interface allows you to simply point and click to
choose from a wide range of piping symbols in either Imperial (inch) or Metric (millimeter)
units.
Once loaded in AutoCAD or AutoCAD LT, "Piping Library" will appear in the menu bar.
Step 1:
Choose a symbol category and pipe size (Imperial units version shown)...
Step 2:
A dialog box appears showing all of the available symbols and their different views with
a description to the left. The red plus symbols indicate the base, or insertion points.
Choose the symbol you would like to insert and click on "OK"...
Step 3:
The dialog box closes and your symbol appears. Insert the symbol and rotate to the
desired position...
.
Details about the blocks:
You'll be able to select from a wide range of symbols, each drawn to 1:1 scale on layer zero
and with "Byblock" attributes. Once inserted, simply rotate the symbol to the desired
position and it will take on the characteristics of your current layer settings. The Byblock
attribute allows you to change the color or linetype of the symbol without exploding it.
Centerlines are not included with the blocks because they are usually on a separate layer
and color. However, the insertion point of each fitting is at the pipe centerline.
All symbols can be inserted using either Imperial units (inch) or Metric units (millimeter).
Here's what you get:
The "Piping Symbols Library version 1.2" comes with a total of 9,400 symbols in the
following categories:
Pipe fittings - double line:
(For each pipe material category, double line pipe can be automatically drawn at the
correct outer diameter for each pipe size by using the "Pipe" feature located in the
dialog box shown above.)
Ductile Iron Flanged fittings - sizes 4" through 48" (100mm through 1200mm)
Follows ANSI/AWWA C110/A21.10
This set contains 90 degree short & long radius elbows, 45 degree short & long radius
elbows, 22 1/2 degree elbows, tees, reducing tees, crosses, laterals, reducing laterals,
blind flanges, eccentric & concentric reducers, and companion flanges.
Click here to view a Ductile Iron Flanged fitting dialog box. The DI flanged symbols
you'll see are typical for each pipe size.
Ductile Iron Mechanical Joint fittings - sizes 4" through 48" (100mm through
1200mm)
Follows ANSI/AWWA C110/A21.10
This set contains 90 degree elbows, 45 degree elbows, 22 1/2 degree elbows, tees,
reducing tees, crosses, laterals, reducing laterals, glands, eccentric & concentric
reducers and companion flanges.
Click here to view a Ductile Iron MJ fitting dialog box. The DI MJ symbols you'll see are
typical for each pipe size.
Carbon Steel Buttweld fittings - sizes 1/2" through 48" (15mm through 1200mm)
This set contains 90 degree short & long radius elbows, 45 degree elbows, 90 degree
reducing elbows, tees, reducing tees, 150 lb. & 300 lb. slip-on & weld-neck flanges,
pipe caps, eccentric reducers, concentric reducers & laterals.
Click here to view a Carbon Steel fitting dialog box. The CS symbols you'll see are
typical for each pipe size.
Stainless Steel Buttweld fittings - sizes 1/2" through 36" (15mm through 900mm)
This set contains 90 degree short & long radius elbows, 45 degree elbows, 90 degree
reducing elbows, tees, reducing tees, 150 lb. & 300 lb. slip-on & weld-neck flanges,
pipe caps, eccentric reducers, concentric reducers & laterals.
Click here to view a Stainless Steel fitting dialog box. The SS symbols you'll see are
typical for each pipe size.
Forged Steel Threaded fittings - sizes 1/8" through 4" (6mm through 100mm) -
3000# & 6000#
This set contains 90 degree elbows, 45 degree elbows, tees, laterals, unions,
couplings, crosses, caps & flanges.
Click here to view a Forged Steel Threaded fitting dialog box. The threaded symbols
you'll see are typical for each pipe size.
Forged Steel Socketweld fittings - sizes 1/8" through 4" (6mm through 100mm) -
3000# & 6000#
This set contains 90 degree elbows, 45 degree elbows, tees, laterals, unions,
couplings, crosses, caps & flanges.
Click here to view a Forged Steel Socketweld fitting dialog box. The threaded symbols
you'll see are typical for each pipe size.
PVC fittings - sizes 3/8" through 24" (10mm through 600mm) - Schedule 40 & 80
This set contains 90, 45, 30, 22.5 & 11.25 degree elbows, tees, reducing tees, crosses,
reducing crosses, saddles, laterals, reducing laterals, wyes, reducing wyes, couplings,
unions, caps, reducers & flanges.
Click here to view a PVC fitting dialog box. The PVC symbols you'll see are typical for
each pipe size.
Polypropylene fittings - sizes 2" through 12" (50mm through 300mm)
PN10/SR150
This set contains 90 degree elbows, 45 degree elbows, tees, flanges, reducers & pipe
caps.
Click here to view a PP fitting dialog box. The PP symbols you'll see are typical for each
pipe size.
Weldolets, Thredolets, Sockolets
Views: side & end
Weights: standard, extra strong, double extra strong, 3000# & 6000#
Expansion joints:
Manufacturer: Flexicraft
Styles: Rubber arch, Type N metal, Type NLC metal
Rubber: 1,2 & 3 arch; concentric & eccentric reducing; 150# flanges - sizes 1" (25mm)
through 48" (1200mm)
Metal: 50#, 150# & 300# flanged and buttweld ends - sizes 2" (50mm) through 36"
(900mm)
Click here to view a rubber expansion joint dialog box. The symbols you'll see here are
typical for all sizes.
.
Click here to view a metal expansion joint dialog box. The symbols you'll see here are
typical for all sizes
Piping equipment website links:
Simply click on the desired category within the pulldown menu and your web browser
will automatically launch and connect you to the website you choose.
System requirements:
Compatible with AutoCAD 2000 through 2008 and AutoCAD LT 2000 through 2008