The document discusses various additives used for gypsum board manufacturing and their benefits:
1. Synthetic latex added to starch mix strengthens gypsum boards by reducing starch consumption and improving breaking strength, edges, strength, finish, moisture resistance, and is economical.
2. Synthetic adhesive is used for pasting side paper on gypsum board edges.
3. Foaming agent reduces water needed in gypsum slurry, lowering energy and production costs.
The document discusses various additives used for gypsum board manufacturing and their benefits:
1. Synthetic latex added to starch mix strengthens gypsum boards by reducing starch consumption and improving breaking strength, edges, strength, finish, moisture resistance, and is economical.
2. Synthetic adhesive is used for pasting side paper on gypsum board edges.
3. Foaming agent reduces water needed in gypsum slurry, lowering energy and production costs.
The document discusses various additives used for gypsum board manufacturing and their benefits:
1. Synthetic latex added to starch mix strengthens gypsum boards by reducing starch consumption and improving breaking strength, edges, strength, finish, moisture resistance, and is economical.
2. Synthetic adhesive is used for pasting side paper on gypsum board edges.
3. Foaming agent reduces water needed in gypsum slurry, lowering energy and production costs.
GYPSUM BOARD 2. SYNTHETIC ADHESIVE FOR PASTING PAPER ON EDGE OF GYPSUM BOARD 3. FOAMING AGENT 4. ADHESIVE FOR LAMINATING PVC FILM SYNTHETIC LATEX : We are pleased to inform you about new development of Synthetic Latex which is to be added in small percentage to the Starch mix of Gypsum board.
The addition of small percentage of Synthetic Latex to
the Starch mix gives,
* Less consumption of Starch.
* Superior Breaking strength of Gypsum board. * Well defined edges of Gypsum board. * Better strength to the Gypsum board. Contd... * Superior finish to the Gypsum board. * Avoid storage, transport and installation damages. * Good moisture / water resistance properties. * Very small dosage of Synthetic Latex to be used with starch mix. * Highly economical to use.
At present we are giving this latex to many
reputed Gypsum board manufacturers. Our Synthetic Latex/Adhesive is also used for pasting side paper on Edge of Gypsum boards. FOAMING AGENT : • Excess water is needed to make Gypsum slurry fluid enough to form the board. • Excess water is then removed during the drying stage leaving small voids in the core making the board lighter. • Foaming agent helps in reducing amount of water required to obtain a free flowing aqueous core slurry which in turn reduce the energy cost to cure and dry the Gypsum board thereby decreasing production time. PROPERTIES Foaming agent-Regular SUPERFOAM Appearance Clear Low viscous Liquid Viscous Flowable Liquid Color Colorless to Pale Yellow Colorless to Pale Yellow Odor Characteristic Characteristic Chemical Nature Anionic EO based Surfactant Anionic EO based Surfactant pH of 10% sol 6 to 7.5 6 to 8.5 Active matter 27 to 29 68 minimum Ionic Nature Anionic Anionic Adhesive for Laminating PVC film or Aluminium foil etc on plain and uneven surfaces of fibre cement, Gypsum boards, (FCB), Cement bonded wood particle board (CWPB) etc. We are.. • We are Chennai, India based company. • We are in the field since last 45 years. • Our manufacturing process is fully computerised.