Professional Documents
Culture Documents
Main Products en
Main Products en
Marine Paints
1. SHOP PRIMERS 13
2. ANTICORROSIVE COATINGS 13
3. ANTIFOULINGS 14
3-1 For worldwide service ship 14
3-2. For coastal ship 15
4. FINISH COATINGS 16 【Product data on this list】
5. TANK & HEAVY DUTY COATINGS 17 ■ Described application quantities are theoretical figures.
5-1 For tank 17 To find actual application quantities, multiply the described figures by 1.2~1.4 for brush coatings,
5-2 For cargo hold 18 and multiply by 1.6~1.8 (by 1.4 for Shop primer) for spray coatings.
5-3 Glass flake mastic paint 19 Application quantities may deffer depeing on object or coating conditions.
6. FISH BOATS & SMALL BOATS 19 ■ Painting Interval described as "(-)" is subject to top coatings. Please consult CMP for details.
7. PLEASURE BOATS 20 ■ The product data for antifouling paint is based on red or brown color.
8. VARIOUS FUNCTIONAL COATINGS 20 ■ Described painting Interval is the minimum drying period to launch.
8-1 Heat resistance paint 20 ■ Our marine paints are complied with AFS/CONF/26, IMO International Convention on the Control
8-2 Paint for galvanized surface, aluminium, stainless steel, etc 21 of Harmful Antifouling System on Ships.
8-3 Bituminous paint 21 ■ The information on this sheet is subject to revise without notice.
8-8 Others 22 ■ Use the products properly according to SDS and the directions on the product package.
9. HIGH PERFORMANCE COATINGS 23 ■ Mix properly according to the specified Mixing Ratio for multiple component products,
9-1 Foul release antifouling paint 23 otherwise, expected product performance will not be delivered.
9-2 Ultra weather resistance paint 23 ■ Before using, stir the paint well even single component product.
9-3 Fluorescent paint 23 ■ It is not recommendable to use under rainy or high humidity conditions.
9-4 Heat reflecting paint 23 ■ When applying the paints, wear protective goggles and mask.
10. SPECIALTY PRODUCTS 23 ■ Keep the products in a well ventilated area and avoid direct sunlight.
INDEX - for Alphabetical -
Products Name Page Products Name Page Products Name Page Products Name Page
A ACRI 200 19 D DEW FREE 2000 22 P PERMAX No.1000 HB W 19 S SEAJET 441 20
ACRI 800 FINISH 16 E EPICON A-100 PRIMER 21 PERMAX No.1000 PRIMER S 19 SEATENDER 20 16
ACRI 800 PRIMER 13 EPICON B-100 PRIMER 21 PERMAX No.1000 PRIMER W 19 SEATENDER 7 16
ALP 500 13,21 EPICON BR 18 PERMAX No.3000 S 19 SILICON HR 20
APPARE 19 EPICON FINISH HB 16 PERMAX No.3000 S W 19 SILICON HR BLACK 20
B BANNOH 1500 13,18 EPICON FINISH HB EX 16 PERMAX No.3300 19 SILICON HR PRIMER 20
BANNOH 1500 QD 14,18 EPICON HR 20 R ROSWAN QD HB 13 SILICON HR SILVER 20
BANNOH 1500 R Z 14 EPICON S-100 PRIMER 21 RUST INHIBITIVE OIL "CK" 22 SILICON HR SILVER HG 20
BANNOH 200 13 EPICON T-500 17 S SCREW AF SET FOR COASTAL 21 SILVA SPAR 20
BANNOH 200 QD 13 EPICON T-500 HS 17 SEA GRANDPRIX 1000 L 15 SILVAX SQ-K 13
BANNOH 5000 18 EPICON T-500 PRIMER H 17 SEA GRANDPRIX 200 R 16 SWAN HB L 13,16
BIOCRYSTY 500 22 EPICON T-500 PRIMER H QD 17 SEA GRANDPRIX 2200 16 T THERMO SHADAN PU 23
BIOCRYSTY 700TRB II 22 EPICON T-500 QD 17 SEA GRANDPRIX 500 HS 15 THERMO SHADAN UNDERCOAT EP 23
BIOCRYSTY W 22 EPICON T-800 17 SEA GRANDPRIX 500 M HS 15 U UMEGUARD EG 18
BIOGUARD C100A 22 EPICON T-800 HS 17 SEA GRANDPRIX 800 EX 16 UMEGUARD SUPER-H 18
BIOGUARD C-2 CLEAR N 22 EPICON T-800 QD 17 SEA GRANDPRIX 880 HS 15 UMEGUARD SUPER-H QD 18
BIOGUARD C-3 22 EPICON ZINC HB-2 13 SEA GRANDPRIX 880 HS PLUS 15 UMEGUARD SX 14,18,22
BIOGUARD EX-100A 22 EPICON ZINC RICH PRIMER B-2 13 SEA GRANDPRIX FBX PLUS 15 UMEGUARD SX QD 14,18,22
BIOGUARD W 22 EVAMARINE 16 SEA PREMIER 1000 15 UNIZINC 80 13
BISCON HB-NT L 14,18 EVAMAX 2000 18 SEA PREMIER 1000 PLUS 15 UNY MARINE 16
BISCON HB-NT L QD 14,18 EVAMAX 2000 F 18 SEA PREMIER 1000 PLUS H 15
BITUMEN SOLUTION B 21 EVAMAX 2000 QD 18 SEA PREMIER 200 PLUS 15
BONDET PUTTY 22 EVASIGN No.100 23 SEA PREMIER 2000 PLUS 15
C CERABEST Grey 20 EVASIGN No.100 CLEAR 23 SEA PREMIER 3000 15
CERABEST WHITE 20 F FLUOREX FINISH 23 SEA PREMIER 3000 PLUS 1 15
CERABOND 2000 13 FLUOREX UNDERCOAT EP 23 SEA PREMIER 3000 PLUS 2 15
CLEANKEEP 18 G GALBON S-HB 20 SEA PREMIER CF Z 15
CLEANKEEP 5000 18 GALBON SP 20 SEAFLO NEO 500 Z 14
CLEANKEEP 5000 QD 18 GALVANITE No.200 PRIMER 21 SEAFLO NEO CF PREMIUM 14
CLEANKEEP 5500 18 GALVANITE No.400 PRIMER 21 SEAFLO NEO CF PREMIUM EX 14
CMP AC 13 K KAMOME FRP PRIMER 19 SEAFLO NEO CF Z 14
CMP AC-10 13 M MARINE STAR 30G 19 SEAFLO NEO CF Z SUPER 14
CMP AC-EP 13 MARINE STAR A 19 SEAFLO NEO FLAT Z 14
CMP BIOCLEAN HB 14,23 MAXSTOP GR 21 SEAFLO NEO M1 PLUS 14
CMP BIOCLEAN PLUS 14,23 MAXSTOP GS 21 SEAFLO NEO SL M 14
CMP BIOCLEAN R 21,23 N NEW KAIO 19 SEAFLO NEO SL Z 14
CMP BIOCLEAN R PLUS 14 NEW KAIO 300 19 SEAFLO NEO Z 14
CMP BIOCLEAN SG-R 21,23 NEW KAMOME 19 SEAFLO NEO Z PLUS 14
CMP CERAZEUS 13 NEW MARINE GOLD DX PLUS 19 SEAJET 013 20
CMP LINER BLUE 23 NEW PELLER CLEAN PLUS Big 20,21 SEAJET 015 20
CMP LINER GREY 23 NEW PELLER CLEAN PLUS Jr 20,21 SEAJET 020 20
CMP NOVA 2000 17 NEW PELLER CLEAN PLUS mini 20,21 SEAJET 033 20
CMP NOVA 2000 QD 17 NON-SKID DECK SAND 21 SEAJET 033 PREMIUM 20
CMP NOVA 5000 17 NON-SLIP Agent for DECK PAINT 21 SEAJET 037 20
CMP NOVA 5000 BARRIER 17,22 NZ PRIMER S 13 SEAJET 039 20
CMP NOVA SUPERECO 17,22 P PERMAX No.1000 HB S 19 SEAJET 137 20
1. SHOP PRIMERS
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (μm) (20℃) (20℃) Thinner
(by Volume) (kg) (L/㎡)
Surfac
Min Max Wet (*) Dry Hard Min maximum Type Remarks
e
BASE 74 20 A primer providing corrosion protection for steel
NZ PRIMER S Red brown 30 ±1% 659 g/L 0.067 (67) 20 4 mins. 2H 16H 120 days Non zinc type epoxy primer
HARDENER 26 5 materials of vessels, onshore steel structures etc.
EPOXY THINNER A
Epoxy zinc primer A primer for touch up applications after secondary
EPICON ZINC RICH PRIMER BASE 70 20 PSPC (WBT,COT) surface preparation of steel plates, or as primer
Grey 43 ±2% 500 g/L 0.035 ~ 0.058 (35 ~ 58) 15 ~ 25 4 mins. 2H 16H 180 days Two-pack type
B-2 HARDENER 30 5 certified for temporary corrosion protection of steels for
FDA certified(*) shipbuilding and other steel products.
20 EPOXY THINNER
UNIZINC 80 - Grey 44 ±2% 527 g/L 0.041 41 18 3 mins. 2H 1H 180 days Epoxy zinc primer One-pack type A rust-preventing primer for weld seams
5 A, B or QD
Green, Grey,
BASE 61 (Organic) INORGANIC SHOP Inorganic zinc silicate shop primer A shop primer for steel substrate of vessels,
CERABOND 2000 20 Light Grey - - 628 g/L 0.030 ~ 0.090 30 - 90 10 ~ 30 2 mins. 4 mins. 180 days
PASTE 39 7 days THINNER A, S or QD PSPC (WBT, COT) certified bridges, oil tanks, and other marine structures
Brown, Grey S
*The Wet film thickness of the shop primer is a theoretical value for reference. (*)Limited colors are certified. Please check the section 5.TANK & HEAVY DUTY COATING
2. ANTICORROSIVE COATINGS
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
16 Silver (S)
SILVAX SQ-K - 30 ±2% 615 g/L 0.133 ~ 0.267 133 ~ 267 40 ~ 80 20mins. 4H 5H - VINYL THINNER Modified vinyl anticorrosive coating
4 Pink silver (SR)
Silver (S)
CMP AC - 20 47 ±2% 486 g/L 0.085 ~ 0.160 85 ~ 160 40 ~ 75 30min 3H 6H -
Silver red (SR)
CR/ACRI THINNER A Special synthetic resin anticorrosive coating A binder-coat for antifouling.
20 S(Silver) (AC) 4H
CMP AC-10 - 41 ±2% 542 g/L 0.122 ~ 0.244 122 ~ 244 50 ~ 100 30min 4H -
4 SR(Silver red) (AF) 6H
White Water based anticorrosive coating An anti-rust primer and finish coating of marine
SWAN HB L - 20 51 ±2% 86 g/L 0.118 ~ 0.157 118 ~ 157 60 ~ 80 1H 4H 4H - Fresh water
Tint as Specified and steel structures.
BASE 66 18
ALP 500 Light grey 58 ±2% 410 g/L 0.086 ~ 0.216 86 ~ 216 50 ~ 125 1.5H 16H 10H - Epoxy primer for aluminum substrate A primer on Aluminium
HARDENER 34 4
White, Grey
BASE 76 20
BANNOH 200 Light grey N8 57 ±2% 411 g/L 0.088 ~ 0.351 88 ~ 351 50 ~ 200 1.5H 12H 10H - Modified epoxy rust-preventive coating, high-build
HARDENER 24 5 EPOXY THINNER A A primer inside and outside of superstructures,
Red brown
exposed deck of steel ships and other steel
White, Grey Modified Epoxy rust-preventive coating, high- structures
BASE 76 20 3H 20H 16H
BANNOH 200 QD Light grey N8 57 ±2% 411 g/L 0.088 ~ 0.351 88 ~ 351 50 ~ 200 - build
HARDENER 24 5 (5℃) (5℃) (5℃)
Red brown (for low temperature)
High-build, High-solid
Grey, Red brown An nticorrosive coating for ship's hull, exposed
BASE 79 20 PSPC(WBT,
73 ±2% 286 g/L 0.103 ~
★
BANNOH 1500 Light grey, White 0.342 103 ~ 342 75 ~ 250 4H 9H 9H - Epoxy coating decks, superstructures and ballast water tanks,
HARDENER 21 5 COT)certified
Black etc.
FDA certified(*)
(Please refer to coating specification for maximum coating interval)
(*)Limited colors are certified. Please check the section 5.TANK & HEAVY DUTY COATING
- 13 -
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
High-build, High-solid
Grey, Red brown An anticorrosive coating for ship's hull, exposed
BASE 79 20 9H 20H 20H PSPC(WBT,
BANNOH 1500 QD Light grey, White 73 ±2% 286 g/L 0.103 ~ 0.342 103 ~ 342 75 ~ 250 - decks, superstructures and ballast water tanks,
HARDENER 21 5 (5℃) (5℃) (5℃) COT)certified
Black etc.
FDA certified(*)
BASE 81 20 Grey As a binder-coat for An anticorrosive coating for outside shell, tie coat,
BANNOH 1500 R Z 64 ±2% 319 g/L 0.156 ~ 0.391 156 ~ 391 100 ~ 250 3H 8H 8H -
HARDENER 19 5 Plum antifouling coating exposed decks, superstructures
Epoxy coating
3. ANTIFOULINGS
3-1 For worldwide service ship
Theoretical
Film Thickness Drying Time coating Interval
Coverage Caption
Mixing Ratio NET (μm) (20℃) (20℃)
Product name Color V/Sol VOC (L/㎡) Thinner
(by Volume) (kg)
Min
Min Max Wet Dry Surface Hard maximum Type Remarks
(to launch)
Red R, Light red
20 5H
SEAFLO NEO CF PREMIUM - R Red S, Light 50 ±2% 428 g/L 0.15 ~ 0.33 150 ~ 330 75 ~ 165 1H 5H -
4 (12H)
red S
Red N2 7H
SEAFLO NEO Z - 20 59 ±2% 357 g/L 0.127 ~ 0.271 127 ~ 271 75 ~ 160 1H 7H -
Light red N2 (14H)
Ultra Low Friction
Red 7H Low VOC Special polyester For worldwide service ship.
SEAFLO NEO Z PLUS - 20 59 ±2% 356 g/L 0.068 ~ 0.271 68 ~ 271 40 ~ 160 1H 7H -
Light red (14H) Cuprous oxide type polymer type For outfitting period at newbuilding.
CR/ACRI THINNER A
Hydrolysis antifouling.
Red 5H
SEAFLO NEO FLAT Z - 20 57 ±2% 380 g/L 0.132 ~ 0.263 132 ~ 263 75 ~ 150 1H 5H - For flat bottom of newbuilding.
Light red (14H)
Brown 5H
SEAFLO NEO M1 PLUS - 20 65 ±2% 321 g/L 0.115 ~ 0.246 115 ~ 246 75 ~ 160 1H 5H Special hydrolysis type For flat bottom
Light brown (12H)
20 Brown H 5H
SEAFLO NEO SL Z - 56 ±2% 402 g/L 0.134 ~ 0.295 134 ~ 295 75 ~ 165 1H 5H -
4 Light brown H (12H)
Ultra Low Friction Special silyl
Copper type methacrylate polymer
Hydrolysis antifouling. type
20 Brown 5H
SEAFLO NEO SL M - 60 ±2% 374 g/L 0.125 ~ 0.275 125 ~ 275 75 ~ 165 1H 5H -
4 Light brown (12H)
- 14 -
Theoretical
Film Thickness Drying Time coating Interval
Coverage Caption
Mixing Ratio NET (μm) (20℃) (20℃)
Product name Color V/Sol VOC (L/㎡) Thinner
(by Volume) (kg)
Min
Min Max Wet Dry Surface Hard maximum Type Remarks
(to launch)
BASE 75
Light grey S -
CMP BIOCLEAN HB HARDENER 19 16L 79 ±2% 191 g/L 0.253 253 200 3H 5H -
Red brown S (24H)
ACCELERATOR 6
BASE 74.5
- Silicone elastomer foul
CMP BIOCLEAN PLUS HARDENER 16.1 16L Red brown S 70 ±2% 276 g/L 0.214 ~ 0.286 214 ~ 286 150 ~ 200 3H 5H - SILICON THINNER A
(24H) release coating
ADDITIVE 9.4
Red brown 7H
CMP BIOCLEAN R PLUS - 16L 65 ±2% 311 g/L 0.154 ~ 0.308 154 ~ 308 100 ~ 200 2H 7H - For rudder and propeller etc.
Plum (14H)
20 Red N, Purple N, 5H
SEA PREMIER 1000 PLUS - 42 ±2% 504 g/L 0.179 ~ 0.357 179 ~ 357 75 ~ 150 1H 5H -
4 Blue N, Green (12H)
BASE 98 5H
SEA PREMIER 3000 PLUS 1 20.2 Red, Light brown 60 ±2% 375 g/L 0.067 ~ 0.25 67 ~ 250 40 ~ 150 1H 5H -
Additive 2 (12H)
BASE 96 5H
SEA PREMIER 3000 PLUS 2 20.4 Red, Light brown 59 ±2% 385 g/L 0.068 ~ 0.254 68 ~ 254 40 ~ 150 1H 5H - Ultra Low Friction
Additive 4 (12H)
Copper type Silyl methacrylate
(for Steel ships) polymer type.
5H
SEA PREMIER 3000 - 20.4 Red, Light brown 61 ±2% 372 g/L 0.066 ~ 0.246 66 ~ 246 40 ~ 150 1H 5H - Hydrolysis antifouling.
(12H)
BASE 98 5H
SEA PREMIER 2000 PLUS 20.2 Red, Brown 55 ±2% 419 g/L 0.073 ~ 0.273 73 ~ 273 40 ~ 150 1H 5H -
Additive 2 (12H)
- 15 -
Theoretical
Film Thickness Drying Time coating Interval
Coverage Caption
Mixing Ratio NET (μm) (20℃) (20℃)
Product name Color V/Sol VOC (L/㎡) Thinner
(by Volume) (kg)
Min
Min Max Wet Dry Surface Hard maximum Type Remarks
(to launch)
20 Red 5H
SEA GRANDPRIX 200 R - 52 ±2% 456 g/L 0.144 ~ 0.288 144 ~ 288 75 ~ 150 1H 5H - Zinc acrylate polymer
4 Light red (12H)
Copper type
20 Red 5H
SEA GRANDPRIX 800 EX - 56 ±2% 407 g/L 0.071 ~ 0.268 71 ~ 268 40 ~ 150 1H 5H - (for Steel ships) Silyl polymer type
4 Brown (12H)
Hydrolysis antifouling.
20 Red 5H
SEA GRANDPRIX 2200 - 61 ±2% 372 g/L 0.066 ~ 0.246 66 ~ 246 40 ~ 150 1H 5H - CR/ACRI THINNER A Silyl polymer type
4 Light brown (12H)
Brown
20 5H
SEATENDER 20 - Light brown 61 ±2% 366 g/L 0.123 ~ 0.246 123 ~ 246 75 ~ 150 1H 5H - Self polishing antifouling.
5 (12H)
Black, Blue
20 20 5H
SEATENDER 7 - Red brown 56 ±2% 431 g/L 0.062 ~ 0.089 63 ~ 89 35 ~ 50 3H - Special synthetic resin antifouling.
5 mins. (6H)
(Please refer to coating specification for maximum coating interval)
4. FINISH COATINGS
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
20 (*) White, As A finishing coat on exterior wood and steel
EVAMARINE - 50 ±2% 407 g/L 0.050 ~ 0.070 50 ~ 70 25 ~ 35 2H 8H 16H - MARINE THINNER Alkyd resin finish coating
4 specified surfaces
18 White, As 30 CR/ACRI THINNER A A finishing coat on ships' topside, boot top, deck,
ACRI 800 FINISH - 42 ±2% 523 g/L 0.071 ~ 0.095 71 ~ 95 30 ~ 40 4H 4H - Acrylic finish coating
4 specified mins. (ACRI THINNER C) superstructure
BASE 74 20 As specified
EPICON FINISH HB 53 ±2% 452 g/L 0.057 ~ 0.189 57 ~ 189 30 ~ 100 1.5H 16H 10H - Epoxy finish coating
HARDENER 26 5 (except White)
High-build A finishing coat of steel ships, bridges and other
EPOXY THINNER A
FDA certified(*) steel structures
BASE 67 18 Epoxy finish coating
EPICON FINISH HB EX White 51 ±2% 468 g/L 0.059 ~ 0.196 59 ~ 196 30 ~ 100 1.5H 16H 10H -
HARDENER 33 4 (White only)
BASE 80 18 White, As 20 URETHANE THINNER Polyurethane finish A glossy finishing coat on outside of
UNY MARINE 50 ±2% 475 g/L 0.100 100 50 6H 4H - Normal
HARDENER 20 4 specified mins. A coating superstructure, deck and fittings
White Water based anticorrosive coating An anti-rust primer and finish coating of marine
SWAN HB L - 20 51 ±2% 86 g/L 0.118 ~ 0.157 118 ~ 157 60 ~ 80 1H 4H 4H - Fresh water
Tint as Specified and steel structures.
*The products weight might be set to 18kg, depending on the color. (Please refer to coating specification for maximum coating interval)
(*)Limited colors are certified. Please check the section 5.TANK & HEAVY DUTY COATING
- 16 -
5. TANK & HEAVY DUTY COATINGS
5-1 For tank
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
PSPC (COT) certified
FDA certified(*)
BASE 73 20 40 21 days Able to be used as
EPICON T-500 PRIMER H Pink brown 35 ±2% 578 g/L 0.143 143 50 8H 12H
HARDENER 27 5 mins. (*7 days) holding primer (Please
see the product
manual.)
28 days PSPC (COT) certified For product carrier tank, cargo oil tank, chemical
BASE 73 20 1.5H 16H 16H
EPICON T-500 PRIMER H QD Pink brown 35 ±2% 578 g/L 0.143 143 50 (*10 days) FDA certified(*) tank, hold, drinking water tank, fresh water tank,
HARDENER 27 5 (5℃) (5℃) (5℃)
(5℃) (for low temperature) portable water tank, solvent tank, etc.
Epoxy coating
Red brown
BASE 78 20 12H 21 days PSPC (COT) certified
EPICON T-500 Grey, White 58 ±2% 403 g/L 0.121 ~ 0.276 121 ~ 276 70 ~ 160 1.5H 12H * EPICON T-500 HS cannot be applied in Drinking
HARDENER 22 5 (**16H) (*7 days) FDA certified(*)
Light grey water tank and Fresh water tank.
Red brown 20 days PSPC (COT) certified
BASE 78 20 2.5H 24H 24H
EPICON T-500 QD Grey, White 58 ±2% 403 g/L 0.121 ~ 0.276 121 ~ 276 70 ~ 160 (*10 days) EPOXY THINNER B FDA certified(*)
HARDENER 22 5 (5℃) (5℃) (5℃)
Light grey (5℃) (for low temperature)
Red brown
BASE 77 20 21 days High-solid type
EPICON T-500 HS Grey 74 ±2% 267 g/L 0.135 ~ 0.216 135 ~ 216 100 ~ 160 1.5H 12H 16H
HARDENER 23 5 (*7 days) PSPC (COT) certified
Light grey
Red brown
BASE 84 20 21 days PSPC (COT) certified
EPICON T-800 Grey 65 ±2% 359 g/L 0.115 ~ 0.246 115 ~ 246 75 ~ 160 1.5H 12H 16H
HARDENER 16 5 (*7 days) FDA certified(*)
Light grey
Red brown 28 days PSPC (COT) certified For product carrier tank, cargo oil tank, chemical
BASE 84 20 3.5H 24H 24H Epoxy phenolic coating
EPICON T-800 QD Grey 65 ±2% 359 g/L 0.115 ~ 0.246 115 ~ 246 75 ~ 160 (*10 days) FDA certified(*) tank, etc.
HARDENER 16 5 (5℃) (5℃) (5℃)
Light grey (5℃) (for low temperature)
Red brown High-solid type
BASE 79 20 21 days
EPICON T-800 HS Grey 75 ±2% 261 g/L 0.133 ~ 0.267 133 ~ 267 100 ~ 200 1.5H 12H 16H PSPC (COT) certified
HARDENER 21 5 (*7 days)
Light grey FDA certified(*)
20 Surface tolerant anticorrosive coating for For ballast water tank, void space, cofferdam,
BASE 80 Buff
CMP NOVA SUPERECO 5 80 ±2% 213 g/L 0.156 ~ 0.312 156 ~ 312 125 ~ 250 4H 12H 12H - EPOXY THINNER A maintenance without coating film surface cargo hold, engine room other steel structures,
HARDENER 20 Light grey
1 roughening etc.
(Please refer to coating specification for maximum coating interval)
* If the coated surface has been exposed to direct sunlight, the maximum coating interval is as "*" of above.
(*)Limited colors are certified.
- 17 -
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
Grey, Light grey
BASE 79 20 High-build, High-solid
73 ±2% 286 g/L 0.103 ~
★
BISCON HB-NT L 0.439 175 ~ 439 100 ~ 250 2.5H 17H 17H -
HARDENER 15 5 White, Black, etc. FDA certified(*)
Epoxy coating
High-build
BASE 85 20 Red brown, Grey, 2.5H 20H 20H
BISCON HB-NT L QD 57 ±2% 428 g/L 0.175 ~ 0.439 175 ~ 439 100 ~ 250 - FDA certified(*)
HARDENER 15 5 White, Black, etc. (5℃) (5℃) (5℃) For cargo hold, Inside and outside of
(for low temperature) accommodation space, void space, cofferdam,
for cargo holds engine room, pipe line, other steel structures, etc.
BASE 84 20 Light Grey
UMEGUARD EG 82 ±2% 204 g/L 0.122 ~ 0.305 122 ~ 305 100 ~ 250 4H 7H 7H 7 days Epoxy coating High-build
HARDENER 16 5 Red brown
FDA certified(*)
* For apply to the general parts, please refer to "2.
BASE 85 20 Red brown, Grey, High-build Anticorrosive coating".
UMEGUARD SX 57 ±2% 432 g/L 0.175 ~ 0.439 175 ~ 439 100 ~ 250 2.5H 17H 17H -
HARDENER 15 5 White, Black, etc. FDA certified(*)
Surface tolerant epoxy
coating High-build
BASE 85 20 Red brown, Grey, 2.5H 20H 20H
57 ±2% 428 g/L 0.175 ~
★
BASE 75 20 Grey
EVAMAX 2000 78 ±2% 258 g/L 0.128 ~ 0.321 128 ~ 321 100 ~ 250 5H 14H 14H 10 days High-solid
HARDENER 25 5 Red brown
Epoxy/Polyamide coating
BASE 75 20 Grey 8H 24H 24H 15 days High-solid
EVAMAX 2000 QD 78 ±2% 249 g/L 0.128 ~ 0.321 128 ~ 321 100 ~ 250 (special abrasive For cargo hold carrying hard cargoes
HARDENER 25 5 Red brown (5℃) (5℃) (5℃) (5℃) (for low temperature)
resistance)
BASE 81 20 Light grey High-solid
EVAMAX 2000 F 78 ±2% 223 g/L 0.128 ~ 0.321 128 ~ 321 100 ~ 250 3H 7H 7H 10 days
HARDENER 19 5 Red brown FDA certified(*)
* maximum coating interval is unlimited if the water wash is carried out to remove all the dirt.
(*)Limited colors are certified.
- 18 -
5-3 Glass flake mastic coating
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃)* (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
BASE 100
PERMAX No.1000 PRIMER S 15.15 Reddish brown 56 ±2% 399 g/L 0.071 ~ 0.107 71 ~ 107 40 ~ 60 4H 6H 16H 7 days
HARDENER 1
Vinyl-ester resin primer A primer of PERMAX No.1000 series
BASE 100 6H 15H 18H 10 days
PERMAX No.1000 PRIMER W 15.15 Reddish brown 55 ±2% 402 g/L 0.073 ~ 0.109 73 ~ 109 40 ~ 60 for low temperature
HARDENER 1 (5℃) (5℃) (5℃) (5℃)
PERmaximum No.1000
DILUENT
BASE 100
PERMAX No.1000 HB S 17.17 Grey 76 ±2% 195 g/L 0.395 ~ 0.461 395 ~ 461 300 ~ 350 8H 12H 20H 5 days
HARDENER 1.2 Vinyl-ester resin
Glass flake coating
100 6H 10H 16H 5 days High-build type
BASE
PERMAX No.1000 HB W 1.1- 17.17 Grey 76 ±2% 195 g/L 0.366 ~ 0.461 366 ~ 461 300 ~ 350 (5℃) (5℃) (5℃) (5℃) for low temperature
HARDENER
2.2 ** ** ** **
Grey
BASE 79 For splash zone and under water area of ship's
PERMAX No.3000 S 18 Red brown 92 ±2% 194 g/L 0.326 ~ 0.543 326 ~ 543 300 ~ 500 6H 16H 16H 3 days
HARDENER 21 Epoxy/polyamide glass outer shell and offshore structures
Black
flake mastic coating
Grey Ultra High-build type
BASE 79 12H 32H 28H 5 days
PERMAX No.3000 S W 18 Red brown 92 ±2% 151 g/L 0.326 ~ 0.543 326 ~ 543 300 ~ 500 EPOXY THINNER A for low temperature
HARDENER 21 (5℃) (5℃) (5℃) (5℃)
Black
Epoxy/polyamide glass
BASE 77 Light grey
PERMAX No.3300 20 80 ±2% 241 g/L 0.25 ~ 0.375 250 ~ 375 200 ~ 300 2.5H 7H 7H - flake mastic coating
HARDENER 23 Red brown
High-build type
** At the mixing ratio of 100:2.2. (Please refer to coating specification for maximum coating interval)
4 Red 4H
NEW KAMOME - 41 ±2% 493 g/L 0.112 122 50 1H 4H - Special synthetic resin antifouling coating
2 Blue (6H)
For FRP boats
20 Red V, Blue V,
4H Self polishing antifouling coating
MARINE STAR 30G - 4 Silver white V, 51 ±2% 468 g/L 0.098 98 50 1H 4H -
(6H)
2 Green V
20
Red H, Blue H 5H
APPARE - 4 51 ±2% 422 g/L 0.10 ~ 0.196 98 ~ 196 50 ~ 100 1H 5H -
Black H (12H)
2
CR/ACRI THINNER A
20
NEW MARINE GOLD DX Red, Blue, White 4H
- 4 40 ±2% 533 g/L 0.125 ~ 0.25 125 ~ 250 50 ~ 100 1H 4H - For FRP,aluminium and steel boat's bottom
PLUS Black, Green (6H)
2
Hydrolysis antifouling coating
20, 5 5H
NEW KAIO - Light Red H 46 ±2% 468 g/L 0.118 ~ 0.217 109 ~ 217 50 ~ 100 1H 5H -
4, 2 (12H)
For FRP boats
20 Red 5H
NEW KAIO 300 - 45 ±2% 477 g/L 0.111 ~ 0.222 111 ~ 222 50 ~ 100 1H 5H -
4 Blue, Black (12H)
Red I, Blue I
20 5H Special synthetic resin antifouling coating
MARINE STAR A - Red Brown I, 55 ±2% 446 g/L 0.182 182 100 1H 5H - For aluminium ships
4 (12H)
White I, Black I
16 * White, Grey
30 A top coat for pleasure boat and yacht.
ACRI 200 - 4 Light Blue 37 ±1% 574 g/L 0.068 ~ 0.095 68 ~ 95 25 ~ 35 3.5H 3.5H - ACRI THINNER C Acrylic finish coating
mins. (for Hull)
2 Light Green
*The products weight might be set to 15kg, depending on the color. ( ) is the minimum time to launch.
- 19 -
7. PLEASURE BOATS
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
20
SEAJET 015 - 2L Silver 32 ±2% 583 g/L 0.133 133 40 2H 3H - SEAJET THINNER A Acrylic resin primer A primer and binder coat for FRP boat's bottom
mins.
BASE 66
SEAJET 020 2kg set Light grey 52 ±2% 410 g/L 0.095 ~ 0.238 95 ~ 238 50 ~ 125 1.5H 16H 10H - SEAJET THINNER D Epoxy primer A primer for aluminium and aluminium alloy
HARDENER 34
BlueⅠ, RedⅠ,
5H Copper type
SEAJET 033 - 2L BlackⅠ, 51 ±2% 468 g/L 0.098 ~ 0.196 98 ~ 196 50 ~ 100 1H 5H -
(12H) Self polishing antifouling coating
Shark whiteⅠ
BlueⅠ, RedⅠ,
5H Copper type
SEAJET 033 PREMIUM - 2L BlackⅠ, 49 ±2% 460 g/L 0.102 ~ 0.204 102 ~ 204 50 ~ 100 1H 5H - For FRP boat's bottom
(12H) Self polishing antifouling coating
Shark whiteⅠ
Ash Black H
5H SEAJET THINNER A Copper type
SEAJET 039 - 2L Ash Blue H 46 ±2% 471 g/L 0.109 ~ 0.217 109 ~ 217 50 ~ 100 1H 5H -
(12H) Hydrolysis antifouling coating
Ash Grey H
Pure White
Cuprous oxide free type
Pure Black 6H
SEAJET 037 - 2L 42 ±2% 515 g/L 0.120 ~ 0.240 120 ~ 240 50 ~ 100 1H 4H - Hydrolysis antifouling For FRP, aluminium and steel ship's bottom.
Pure Red (10H)
coating
Pure Blue
White
SEAJET 137 - 0.8L 37 ±1% 574 g/L 0.095 ~ 0.135 95 ~ 135 35 ~ 50 1H 5H 5H - Acrylic finish coating A top coat for pleasure boat and yacht.
As specified
BASE 76 (Organic) INORGANIC SHOP A long-term anticorrosive for vessels and general
GALBON SP 10 Grey 38 ±1% 468 g/L 0.034 ~ 0.061 34 ~ 61 13 ~ 23 5 mins. 1H 180 days (up to 400 ℃)
POWDER 24 7days THINNER GS steel products, or as a shop primer
Inorganic zinc silicate
(Organic)
alcohol soluble and self-
24H High-build A protective coating for oil tanks, solvent tanks,
BASE 7 25 20 INORGANIC SHOP curing
GALBON S-HB Grey - 462 g/L 0.083 ~ 0.125 83 ~ 125 50 ~ 75 4H (Organic, - FDA certified(*) outside hull, deck, heating pipes, holds, other
POWDER 3 10 mins. THINNER H
Undrwater) (up to 400 ℃) steel structures, etc.
7 days
BASE 56
CERABEST Grey 21 Grey 42 ±2% 567 g/L 0.071 71 30 4 mins. 30H 7days 180 days A topcoat of inorganic shop primer to prevent from
PASTE 44 INORGANIC SHOP Ultra heat resistant
(up to 800℃) heat damages of steel structures, such as ships'
THINNER A, S or QD coating (inorganic type)
BASE 40 132 45 superstructures.
CERABEST WHITE 21 White 34 ±2% 619 g/L 0,132 4 mins. 30H 7days 180 days
PASTE 60
*The Wet film thickness of the shop primer is a theoretical value for reference.
- 20 -
8-2 coating for galvanized surface, aluminium, stainless steel, etc
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
BASE 71 18 30
EPICON A-100 PRIMER Pale white 47 ±2% 496 g/L 0.053 ~ 0.074 53 ~ 74 25 ~ 35 6H 8H 7 days EPOXY THINNER A A primer for aluminium and aluminium alloy
HARDENER 29 4 mins.
BASE 87 20
EPICON S-100 PRIMER Red brown 29 ±2% 598 g/L 0.086 ~ 0.121 86 ~ 121 25 ~ 35 5 mins. 6H 8H 7 days EPOXY THINNER G A primer for stainless steel, and aluminium
HARDENER 13 4
BASE 79 18 30
EPICON B-100 PRIMER Yellow 50 ±2% 431 g/L 0.140 140 70 3H 3H 5 days Epoxy primer A primer for blass
HARDENER 21 2 mins.
EPOXY THINNER A
BASE 66 18
ALP 500 Light grey 58 ±2% 410 g/L 0.086 ~ 0.216 86 ~ 216 50 ~ 125 1.5H 16H 10H - for under water area A primer on aluminum
HARDENER 34 4
BASE 84 20 10
GALVANITE No.200 PRIMER White 47 ±1% 530 g/L 0.064 ~ 0.106 64 ~ 106 30 ~ 50 4H 4H 30 days EPOXY THINNER G
HARDENER 16 3.6 mins.
A primer on galvanized steel.
BASE 69 Epoxy / polyamide resin
47 ±2% 482 g/L 0.064 ~
★
GALVANITE No.400 PRIMER 20 White 0.106 64 ~ 106 30 ~ 50 1.5H 14H 14H 14 days EPOXY THINNER A
HARDENER 31 primer
SILICON THINNER A
16L Light Grey 7H
CMP BIOCLEAN R - 65 ±2% 325 g/L 0.308 308 200 2H 7H - EPOXY THINNER A Silicone elastomer foul release coating For rudder and propeller etc.
4L Red Brown (14H)
(for cleaning only)
- 21 -
8-6 Surface tolerant coating
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
150 White -
- 34 g/L 10.0~11.0 31~39% 9~13% 24H
★
150
BIOCRYSTY W - Dark brown 17 ±1% 88 g/L 8.0~9.0 30~40% 12~16% 12H - Water base copper type for farming fish net
15
※ spread the fishnet after dyeing
8-8 Others
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
A protective coating against galvanic corrosion
BASE 67 EPOXY THINNER A around the anode, and touching up of pitting
BONDET PUTTY 5 Grey 100 % 0 g/L 2 2000 2000 3H 8H 6H 4 days Epoxy/Polyamide putty Solvent-free type
HARDENER 33 (for cleaning only) corrosion occurring on exterior hull and tank
inside.
15
RUST INHIBITIVE OIL "CK" - 15 Clear 56 ±2% 399 g/L 0.036 36 20 1H - - MARINE THINNER Petroleum resin A temporary protective primer for fuel oil tanks.
mins.
DEW FREE 2000 - 20 White 50 515 g/L 0.6 ~ 1.0 - 300 ~ 500 - 18H 4H - Tap Water Anticondensation coating
- 22 -
9. HIGH PERFORMANCE COATINGS
9-1 Foul release antifouling coating
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
BASE 75
Light grey S -
CMP BIOCLEAN HB HARDENER 19 16L 79 ±2% 191 g/L 0.253 253 200 3H 5H - Silicone elastomer foul release coating
Red brown S (24H)
ACCELERATOR 6
SILICON THINNER A
BASE 74.5
-
CMP BIOCLEAN PLUS HARDENER 16.1 16L Red brown S 70 ±2% 276 g/L 0.214 ~ 0.286 214 ~ 286 150 ~ 200 3H 5H - Silicone elastomer foul release coating
(24H)
ADDITIVE 9.4
SILICON THINNER A
16L Light Grey 7H
CMP BIOCLEAN R - 65 ±2% 325 g/L 0.308 308 200 2H 7H - EPOXY THINNER A Silicone elastomer foul release coating For rudder and propeller etc.
4L Red Brown (14H)
(for cleaning only)
( ) is the minimum time to launch.
16
Scarlet, Red
4 30
EVASIGN No.100 - Green, Orange 53 ±2% 353 g/L 0.075 75 40 4H 2H - Modified alkyd resin finish coating
1 mins.
Lemon, Yellow MARINE THINNER A finishing coat for safety marking
400g*
15
40
EVASIGN No.100 CLEAR - 4 Clear 28 ±1% 603 g/L 0.103 103 25 4H - - for overlay of EVASIGN No.100
mins.
1
*only red
9-4 Heat reflecting coating
Theoretical
Film Thickness Drying Time coating Interval
Mixing Ratio NET Coverage Caption
Product name Color V/Sol VOC (L/㎡)
(μm) (20℃) (20℃) Thinner
(by Volume) (kg)
Min Max Wet Dry Surface Hard Min maximum Type Remarks
THERMO SHADAN BASE 67 18 An intermediate coat of THERMO SHADAN
White 51 ±2% 468 g/L 0.098 ~ 0.196 98 ~ 196 50 ~ 100 1.5H 16H 10H - EPOXY THINNER A Epoxy/Polyamide coating
UNDERCOAT EP HARDENER 33 4 system for outside superstructure, deck
BASE 80 18 Grey 20 URETHANE THINNER A high heat reflectance for ships topside, super
THERMO SHADAN PU 49 ±2% 456 g/L 0.102 102 50 6H 4H - Polyurethane based coating
HARDENER 20 4 Green mins. A structure
*only for the use of sprey
- 23 -
LIST OF MAIN PRODUCTS
主要製品一覧表
HEADQUARTERS
Tokyo Club Building, 2-6, Kasumigaseki 3-chome, Chiyoda-ku, Tokyo, 100-0013, Japan
中国塗料株式会社 TEL : 81-(3)3506-3951 FAX : 81-(3)5511-8541
China Myanmar
東京本社 〒100-0013 東京都千代田区霞が関3-2-6 東京倶楽部ビルディング12F 03-3506-3951
CHUGOKU MARINE PAINTS (SHANGHAI), LTD. CHUGOKU-TOA PAINTS (MYANMAR), LTD.
広島本社 〒739-0652 広島県大竹市明治新開1-7 0827-57-8555 4677, Jiasong Road(North), Jiading, Shanghai, 201814, China No.209, Thanthumar Road, Thuwunna Ward No.23,
TEL : 86-(21)52357799 FAX : 86-(21)52360952 Thingangyun Township, Yangon, Myanmar
東京支店 〒100-0013 東京都千代田区霞が関3-2-6 東京倶楽部ビルディング12F 03-3506-4616
E-Mail : cmpshanghai@cmp.com.cn TEL : 95-17-579-677
北海道 〒061-1433 北海道恵庭市北柏木町3-104 0123-34-5731 E-Mail : info@chugoku-toa.com
CHUGOKU MARINE PAINTS (GUANGDONG), LTD.
東北 〒983-0045 仙台市宮城野区宮城野1-12-1 いちご仙台イーストビル5F 022-298-6355 Industrial Development Area, Lunjiao, Shunde, Foshan, Guangdong, 528308, Netherlands
TEL : 86-757-27733451 FAX : 86-757-27733452 CHUGOKU PAINTS B.V.
静岡 〒422-8063 静岡県静岡市駿河区馬渕3-2-25 T・Kビル4F 054-283-2956
Sluisweg 12, Heijningen, 4794SW, Netherlands
大阪支店 〒550-0002 大阪市西区江戸堀1丁目18番35号 肥後橋IPビル7F 06-6443-7575 Germany TEL : 31-(167)526100 FAX : 31-(167)522059
CHUGOKU PAINTS (GERMANY) G.m.b.H.
E-Mail : sales@cmpeurope.eu
名古屋 〒460-0003 名古屋市中区錦1-7-27 三同ビル錦4F 052-212-2651 Johannisbollwerk 19, 20459 Hamburg, Germany
TEL : 49-40-317-964-80 FAX : 49-40-317-964-76 Singapore
四国支店 〒763-0064 香川県丸亀市前塩屋町2丁目1-40 オレンジハイツ丸亀1F 0877-25-0931
E-Mail : mailbox-de@cmpeurope.eu CHUGOKU MARINE PAINTS (SINGAPORE) PTE. LTD.
今治 〒794-0028 今治市北宝来町1-5-14 井上ナショナル会館3F 0898-23-8264 22 Tuas Street, 638459, Singapore
Greece TEL : 65-6861-6500 FAX : 65-6861-3002
中国支店 〒722-0051 尾道市東尾道14-5 0848-47-1611 CHUGOKU MARINE PAINTS (HELLAS), S.A. E-Mail : salesmarine@cmpsin.com.sg
8 Kanari Street, Piraeus, 18538, Greece
呉 〒737-0051 呉市中央1-4-24 0823-25-5937
TEL : 30-(210)4522489/4522571/4287085/4535089 Taiwan
広島 〒739-0652 広島県大竹市明治新開1-7 0827-57-8570 FAX : 30-(210)4180868 CHUGOKU MARINE PAINTS (TAIWAN), LTD.
E-Mail : cmp-hellas@cmpeurope.eu 5F-2, Shen Hsiang Tang Building, No.146, Sung Chiang Road,
九州支店 〒850-0046 長崎市幸町1-16 095-826-0256
Taipei, 10458, Taiwan
福岡 〒810-0075 福岡市中央区港3-4-27 092-714-7661 Hong Kong TEL : 886-(2) 2511-0106 FAX : 886-(2) 2571-0618
CHUGOKU MARINE PAINTS (HONG KONG), LTD.
E-Mail : cmptpe@ms19.hinet.net
佐世保 〒857-1162 佐世保市卸本町2-3 0956-33-0522 Room 01, 22nd Floor, Island Place Tower, 510 King's Road,
North Point, Hong Kong Thailand
大分 〒875-0053 臼杵市大字福良1897-1 旭産業ビル1F 0972-63-4048
TEL : 852-2576 6376 FAX : 852-2576 3607 TOA-CHUGOKU PAINTS CO., LTD.
E-Mail : marine@cmp-hk.com.hk 159 Sermmit Tower, 19th floor, Soi Sukhumvit 21, Sukhumvit Road,
九州工場 〒842-0035 佐賀県神埼郡吉野ヶ里町田手2783 0952-52-1313
Klongtoey Nua, Wattana, Bangkok, 10110, Thailand
滋賀工場 〒520-2323 滋賀県野洲市三上2306-7 077-587-0488 India TEL : 66-(2)2602701 FAX : 66-(2)2602700
CHUGOKU PAINTS (INDIA) PRIVATE LIMITED E-Mail : mktm@toa-chugoku.com
405, Raheja Chambers Free Press Journal Marg,
Nariman Point, Mumbai, 400021, India U. A. E.
TEL : 91-22-43550600 FAX : 91-22-43550625 CHUGOKU MARINE PAINTS (SINGAPORE) PTE. LTD.
E-Mail : sales@cmpindia.net (Dubai Branch)
Shipping Tower 1st Floor, Al Mina Road, Al Rifa'a,
CMP Website https://www.cmp.co.jp Indonesia
P.T. CHUGOKU PAINTS INDONESIA
P.O.Box 464, Dubai, United Arab Emirates
TEL : 971-4-393-8236 FAX : 971-4-393-4268
8F, Midplaza 1 Bldg., Jalan Jendral Sudirman Kav 10-11,
E-Mail : salesmarine@cmpsin.com.sg
Jakarta, 10220, Indonesia
TEL : 62-(21)5700515 FAX : 62-(21)5733787 U.K.
E-Mail : info@chugoku.co.id CHUGOKU PAINTS (UK) LIMITED
当社製品を安全にお取扱いただくために、製品説明書、SDS(安全データシー Godliman House, 21 Godliman Street, London, EC4V5BD, U. K.
Korea TEL : 44-(0)20-7778-0021 FAX : 44-(0)20-7489-7302
ト)、製品容器に貼付の警告ラベル等を良く読んでご使用ください。 CHUGOKU SAMHWA PAINTS, LTD. E-Mail : mailbox-uk@cmpeurope.eu
322, Gimhae-daero, 927beon-gil, Hallim-myeon, Gimhae-si,
Gyeongsangnam-do, 50850, Korea U.S.A
Prior to use, please read carefully the Technical data sheet, TEL : 82-55-340-0777 FAX :82-55-340-0779 CMP COATINGS, INC.
E-Mail : cspaint@csp.co.kr 1610 Engineers Road, Belle Chasse, Louisiana, 70037, U.S.A
SDS(Safety Data Sheet), and label on the package of our products. TEL : 1-(504) 392-4817 FAX : 1- (504) 392-2979
Malaysia
E-Mail : cmpcoatings@worldnet.att.net
CHUGOKU PAINTS (MALAYSIA) SDN. BHD.
902, Menara PJ, AMCORP Trade Center, No.18, Persiaran Barat,
Petaling Jaya, Selangor Darul Ehsan, 46050, Malaysia
※ このカタログに掲載した製品の仕様は、改良等の理由で予告無く変更することがあります。 TEL : 60-(3)79564373/79562528/79586100 FAX : 60-(3)79560219
E-Mail : cpmpj@cmp.com.my
※ The information given in this sheet is subject to revision from time to time without notice.
2023年5月発行(1000PP)