Professional Documents
Culture Documents
【材性】DH36 Z35
【材性】DH36 Z35
Dimensions
Grade Product Type Thickness Width 1) Length
(Inches) (Inches) (Inches)
Grade AH36Z35 Plate 0.1875- 4.00 2) 72- 129.9 79- 600
Grade DH36Z35 Plate 0.157- 4.00 2)
72- 129.9 79- 600
Grade EH36Z35 Plate 0.197- 4.00 2) 72- 129.9 79- 600
1)
Please inquire for plate widths less than 72 in. and inquire plate product over 120 in.
2)
Inquire for plate thickness less than 0.75 in.
Mechanical Properties
Tensile testing is performed in the transverse direction. When “Z” quality steel is specified, through-thickness tension testing is performed in
accordance with ABS Rules.
Grade Product Type Thickness Yield Strength Tensile Elongation, Minimum Minimum
(Inches) (min ksi) Strength A5 1) Average Individual
(ksi) (min %) Through-Thick- Through-Thick-
ness Reduction ness Reduction
in Area in Area
(%) (%)
Grade Plate 0.1875- 4.00 51 71- 90 22 35 25
AH36Z35
Grade Plate 0.157- 4.00 51 71- 90 22 35 25
DH36Z35
Grade EH36Z35 Plate 0.197- 4.00 51 71- 90 22 35 25
1)
See ABS Rules for elongation requirements for alternative tensile specimens.
Impact Properties
Grade Thickness Test Temp Longitudinal Min average Transverse Min average
energy 1) 2) 3) energy 1) 2) 3)
AH36Z35 0.750- 2.000 Inches 32 °F 25 ft-lbs 17 ft-lbs
AH36Z35 2.001- 2.800 Inches 32 °F 30 ft-lbs 20 ft-lbs
AH36Z35 2.801- 4.000 Inches 32 °F 37 ft-lbs 25 ft-lbs
DH36Z35 0.750- 2.000 Inches -4 °F 25 ft-lbs 17 ft-lbs
DH36Z35 2.001- 2.800 Inches -4 °F 30 ft-lbs 20 ft-lbs
DH36Z35 2.801- 4.000 Inches -4 °F 37 ft-lbs 25 ft-lbs
EH36Z35 0.750- 2.000 Inches -40 °F 25 ft-lbs 17 ft-lbs
EH36Z35 2.001- 2.800 Inches -40 °F 30 ft-lbs 20 ft-lbs
EH36Z35 2.801- 4.000 Inches -40 °F 37 ft-lbs 25 ft-lbs
1)
Specimen orientation at the option of the manufacturer unless otherwise specified in the order.
2)
No more than one value below the specified miniminum average energy but no less than 70% of the specfied minimum average energy value.
3)
Minimum average energy for full-size specimens. Refer to ABS Rules for sub-size specimen energy requirements.
Data sheet ABS Grade AH36, DH36, EH36 Z35 2017-04-19
Chemical Composition
Carbon Equivalent Values
Thickness AH36 AH36 DH36 DH36 EH36 EH36
(Inches) 0.1875 - 2.000 2.001 - 3.000 0.1875 - 2.000 2.001 - 3.000 0.1875 - 2.000 2.001 - 3.000
CEV 1) 0.38 0.40 0.38 0.40 0.38 0.40
(max wt %)
1)
Carbon equivalent requirements for TMCP condition of supply only
Contact Information
www.ssab.com/contact
The English version of this document shall prevail in case of discrepancy. Download the latest version of this document at www.ssab.com
For referenced ABS standards, visit the ABS website, www.eagle.org. The information contained herein is only intended to provide guidance relative to SSAB’s capability to supply
products complying with the requirements of the referenced ABS standards. The information contained herein is in no way a guarantee or warranty of SSAB product. In the
event of an order, the specifications as stated in the purchase order and any subsequent order acknowledgment establish the basis for any product specifications, requirements
and/or guarantees.