Professional Documents
Culture Documents
SIL19 - 018 Sleep Mode Control Via TACHOLINK
SIL19 - 018 Sleep Mode Control Via TACHOLINK
Background
The Connekt reference 900588RAxxRxx is delivered with Sleep Mode activated. This allows a reduced power
consumption, 10 minutes after turning ignition Off. However, it may impact the timing of some interfaces,
such as the motion sensor (x35 events) and D8.
SIL19_018
Page 1/5
∞ For any additional information, please contact us at workshop.support@stoneridge.com, +33 5 59 50 69 51
Set-up
• When the app starts/opens you’ll see:
• To connect a dongle, tap the Settings icon (top right). You will see the settings screen:
SIL19_018
Page 2/5
∞ For any additional information, please contact us at workshop.support@stoneridge.com, +33 5 59 50 69 51
• In TachoConfig Settings screen, tap the first option (Dongle To Connect) and select the dongle:
SIL19_018
Page 3/5
∞ For any additional information, please contact us at workshop.support@stoneridge.com, +33 5 59 50 69 51
• Back in the main screen, click “Connect to SE5000”. This will show a loading icon while the app connects to
the Tachograph.
• Once it has connected you will see the Tachograph Configuration screen:
SIL19_018
Page 4/5
∞ For any additional information, please contact us at workshop.support@stoneridge.com, +33 5 59 50 69 51
• Click on “Sleep Activation” to turn OFF Sleep Mode. The procedure is complete. You can disconnect the
TACHOLINK.
If you have any difficulties configuring the application on your Smart Phone, please refer to our
Android/TACHOLINK FAQ: https://www.se5000.com/tacho-center-app-faqs/
Additional Steps
If the Sleep Mode is turned Off for a D8 problem, you must first ensure with your Telematic partner or using
your company card that the “D8 data format” is set to “SRE”. If D8 is set to “2400”, this must be changed
with the Company card via the Tachograph menu.
The option is in the menu SETTINGS > Parameters > D8 data format. A company card is required.
SIL19_018
Page 5/5
∞ For any additional information, please contact us at workshop.support@stoneridge.com, +33 5 59 50 69 51