The insulating mats comply with technical specification ISO 15652-2006, including a dielectric strength of 30KV, size of 1m by 2m, black color, tensile strength of 15N/mm at -10 to 55°C and 12N/mm at -40 to 27°C, elongation at break of 250% at -10 to 55°C and 350% at -40 to 27°C, insulation resistance of 10,00,000MQ, leakage current of 10uA, and flame retardance. The mats also pass low temperature, aging, and chemical resistance tests.
Original Description:
Substation Technical Specification Of Insulating Mats
The insulating mats comply with technical specification ISO 15652-2006, including a dielectric strength of 30KV, size of 1m by 2m, black color, tensile strength of 15N/mm at -10 to 55°C and 12N/mm at -40 to 27°C, elongation at break of 250% at -10 to 55°C and 350% at -40 to 27°C, insulation resistance of 10,00,000MQ, leakage current of 10uA, and flame retardance. The mats also pass low temperature, aging, and chemical resistance tests.
The insulating mats comply with technical specification ISO 15652-2006, including a dielectric strength of 30KV, size of 1m by 2m, black color, tensile strength of 15N/mm at -10 to 55°C and 12N/mm at -40 to 27°C, elongation at break of 250% at -10 to 55°C and 350% at -40 to 27°C, insulation resistance of 10,00,000MQ, leakage current of 10uA, and flame retardance. The mats also pass low temperature, aging, and chemical resistance tests.
Code: IS-15652-2006 The mats shall comply to ISO: 15652-2006 (superseding IS: 5424-1969)
Dielectric Strength of Mats 30 KV
Size 1 MTR. * 2 MTR Colour Black Finish One side For Temp. -10 to 55°C-15 N/mm (Min.) For Temp. -40 to Tensile Strength 27°C 12 (Min) For Temp. -10 to 55°C-250%(Min.) For Temp. -40 to Elongation At Break 27°C-350% (Min) Insulation Resistance 10,00,000 MQ(Min.) With Water Leakage Current 10 uA(Max.) Flame Retardance The Mat is retarded to fire. Low Temperature No tear, break or crack is observed in Mats under force Resistance of 100N for 30 hrs. at -40°C Aging Test (For Temp. -10 to 55° C and Temp. -40 to 27°C) Tensile Strength Not less then 75% without Aging. Elongation at break Not less then 75% without Aging. Effect Of Naoh, Transformers Oil, HCL (For Temp.-10 to 55°C and Temp.-40 to 27°C) Tensile Strength Not less then 80% without Aging. Elongation at break Not less then 80% without Aging.