Professional Documents
Culture Documents
PA 19077 6000 6000E 8000 8000HP - Vertical - Pit - Pumps - Brochure
PA 19077 6000 6000E 8000 8000HP - Vertical - Pit - Pumps - Brochure
el
ss Stew
t a i n l e
All S ware belo
hard uid line.
liq
PTO Driven
www.patzcorp.com
6000, 8000, & 8000 High Performance
Built strong - easy to use - delivering powerful results!
E asily insert pump into pit because it is articulated on two- Choose basic pump or add optional agitation (for pits with no
point hitch. Enjoy the convenience of all-hydraulic controls crusting or settled solids).
or choose manual controls.
Efficient curved impeller blades in a voluted housing save
Choose from two pump mounting options for agitating time agitating, transferring, and loading. High-volume
below-ground liquid-manure storage pit and for loading pump [up to 3,500 gallons (13,249 liters) per minute].
liquid-manure spreader: Transfer or load while agitating.
1. Stationary base secured to manure pit or
2. Two-point tractor hitch with hydraulics for tilting Impeller, impeller housing, and shear plate come standard
(540 or 1,000 RPM). in AR400 abrasion-resisting steel for longer life.
Match your pit depth with choice of four pump lengths: Get high load-carrying capacity and long service life from
6, 8, 10 and 12 feet (1.83, 2.44, 3.05, and 3.66 m). Large tapered roller bearings in oil bath chamber protected by
U-bolts allow the frame to be adjusted up or down for three seals.
precise placement.
he loading pipe is 20 feet long (6.1 m) and includes a
T
Match your desired speed of transfer and loading with wheeled undercarriage.
two pump sizes: 6-inch (152 mm) and 8-inch (203 mm).
Reduce maintenance costs and get long
Reduce agitation time with dual nozzles that blend service life from heavy-duty gearbox.
Hi
crusted manure and settled solids into a liquid slurry fast.
Tractor Requirements: 6000 & Perfor gh
now av mance
Get better pit clean-out from agitating every corner by 8000, 100 HP minimum; 8000 High ailable
Performance, 140 HP minimum.
!
adjusting nozzles (rotating 270° and raising/lowering 20°).
Electric Drive
Vertical Pit Pump
A stationary base secured to manure pit is standard on the Get high load-carrying capacity and long service life from
6000 E Pump. tapered roller bearings in oil bath chamber protected by
three seals.
Equipped with choice of two-point tractor hitch for easy
insertion and removal from pit for service or manual slide End guessing about oil level. Inspect oil level conveniently
and tilt. in transparent reservoir with dipstick at top of pump.
Match your pit depth with choice of 6, 8, 10, and 12 foot Horsepower Requirements: Twin 15, 20, 25, or 30 HP,
lengths (1.83, 2.44, 3.05, and 3.66 m). Large U-bolts allow 3-phase motors.
the frame to be adjusted up or down for precise placement.
48 Min
61 Max
Get better pit clean-out with optional agitation (nozzle can
be rotated horizontally). 36”
agitation and 2,200 gallons (8,328 liters) per minute during 58” for 8’
80” for 10’
loading. 104” for 12’
Low
30” Port
Impeller, impeller housing, and shear plate come standard 12”
in AR400 abrasion-resisting steel for longer life.
(Agitation)
(varies with Up to 3,500 gal./min. n
moisture content)
and nozzle size Up to 4,000 gal./min. n
Function-
ability On the go shift. n
The 20” x 4”
(508 x 102 mm) Stainless steel
impeller features hardware below
Agitation Optional agitation. n n n n
curved blades. liquid line
Voluted
Optional dual-level n n n housing
agitation and dual Voluted design of the housing and curved blades are continuously being
loaded and unloaded, keeping a constant positive pressure at the discharge
elevation control. point. As the impeller turns, slurry is forced to the outer band area, which
becomes larger as slurry approaches the discharge point. More slurry is
Contact your local Patz Dealer being constantly added to the impeller blades as slurry moves away.
CAUTION: Never operate Patz equipment without all shields and guards in place.
Safety is no accident. Before operating any piece of equipment, be sure to read
and understand the operator’s manual. This manual should be kept with the
machine at all times.
Additionally, make sure all safety shields and devices are functioning properly
and are securely in place.
For some photos in this brochure, guards were removed for photographic purposes
only to allow viewing of the equipment features. Before operating equipment,
all guards must be in place. Because Patz continually improves and updates
products, Patz reserves the right to change the construction of machines or
attachments or any part thereof without incurring any obligation to make like
changes on Patz machines, or attachments previously delivered.
Specifications and prices subject to change without notice.