This document appears to be a section of standards related to structural design and limit states of collapse or failure for flexure, compression, shear, torsion, deflection and cracking in structural elements. It includes assumptions and equations for determining minimum reinforcement and permissible stresses and loads for compression members. Annex B specifically covers structural design using the working stress method, including general requirements, stress limits in concrete and steel, and permissible loads in compression members.
Rules for the Clаssification and Costruction of Sea-Going Ships Part XVIII Additional Requirements for Structures of Container Ships and Ships, Dedicated Primarily to Carry Their Load in Containers 2020 2-020101-124-E-18
This document appears to be a section of standards related to structural design and limit states of collapse or failure for flexure, compression, shear, torsion, deflection and cracking in structural elements. It includes assumptions and equations for determining minimum reinforcement and permissible stresses and loads for compression members. Annex B specifically covers structural design using the working stress method, including general requirements, stress limits in concrete and steel, and permissible loads in compression members.
This document appears to be a section of standards related to structural design and limit states of collapse or failure for flexure, compression, shear, torsion, deflection and cracking in structural elements. It includes assumptions and equations for determining minimum reinforcement and permissible stresses and loads for compression members. Annex B specifically covers structural design using the working stress method, including general requirements, stress limits in concrete and steel, and permissible loads in compression members.
This document appears to be a section of standards related to structural design and limit states of collapse or failure for flexure, compression, shear, torsion, deflection and cracking in structural elements. It includes assumptions and equations for determining minimum reinforcement and permissible stresses and loads for compression members. Annex B specifically covers structural design using the working stress method, including general requirements, stress limits in concrete and steel, and permissible loads in compression members.
38.1 A.lumptions 69 39 LIMIT STATB OF COUAPSS: COMPRESSION 70 39.1 Assumptions 70 39.2 MinimumEccentricity 71 39.3 Short Axially Loaded Members in Compression 71 39.4 Compression Members with HelicalReinforcement 71 39.5 Memben Subjected to Combined Axial Load and U~iaxial Bendins 71 39.6 Memben Subjectedto Combined Axial Load and Biaxial Bending 71 39.7 SlenderCompression Members 71 40 LlMrr STATS OP COLLAPSE: SHEAR 72 40.1 Nominal Shear Stress 72 40.2 DesianShear Strensth of Concrete 12 40.3 Minimum ShearReinforcement 72 40.4 DesiSD of Shear Reinforcement 72 4O.S Bnhanced ShearStrength of Sections Close to Supports 74 41 LIMrr STATE OP COLLAPSB : TORSION 74 41.1 General 74 41.2 Critical Section 7S 41.3 Shear and Torsion 75 41.4 Reinforcement in Members Subjected to Torsion 75 42 LIMIT STATE OF SBRVlCEABD.nY: DEFLECTION 75 42.1 FlexuralMembers 75 43 LIMIT STATE OF SERVICEABILITY' CRACKING 16 43.1 FlexuralMembers 76 43.2 Compre~ion Members 76 ANNEX A LIST OF REFERRED INDIAN STANDARDS 71 ANNEXB STRUCTURAL DESIGN (WORKING STRESS METHOD) 80 B-1 GENERAL 80 B-1.1 General Design Requirements 80 B-l.2 Redistribution of Moments 80 B-l.3 Assumptions for Design of Members 80 B-2 PBRMIsslBLB STRESSBS 80 8-2.1 Permissible Stresses in Concrete 80 8-2.2 Permissible Stresses in Steel Reinforcement 80 B-2.3 Increase in Permissible Stresses 80 B-3 PBRMIssIBLE LoADS IN COMPRBSSION MEMBERS 81 B-3.1 Pedestals and Sbort Columns with Lateral Ties 81 8-3.2 Shon Columns with Helical Reinforcement 81 B-3.3 Lon. Columns 81 "\r. 8-3.4 Composite Columns 81
Rules for the Clаssification and Costruction of Sea-Going Ships Part XVIII Additional Requirements for Structures of Container Ships and Ships, Dedicated Primarily to Carry Their Load in Containers 2020 2-020101-124-E-18