Professional Documents
Culture Documents
Structured Method Statement For Concrete Repair - 6
Structured Method Statement For Concrete Repair - 6
Monitor and control all HSE matters related to project team members and contractors in
ensuring that the Project is in compliance with the project requirement i.e. specification,
safety code, and other policies/guidelines related to the project. Participate in HSE Risk
Assessment and hold the relevant meeting, and workshops internally and with related 3rd
parties. Monitor and update the HSE risks register and ensure all mitigation plans are
strictly adhered to throughout the project execution.
Foreman
Mason
Carpenter
Laborers
All concrete repairs shall be done in accordance with the approved Method Statement
for Repair of Concrete
3. All materials to be used for repair works shall be submitted for approval thru
Material Transmittal.
4. All proprietary materials shall be used strictly in accordance with the
materials manufacturer’s instruction and/or recommendations.
5. Curing for Concrete Patchwork:
Polyethylene or plastic sheets shall be used to cover concrete patchwork. Unless
otherwise specified in the technical data sheets, curing shall be carried out for 2-3
days. If curing compound/membrane is used, they shall be compatible with the
repair products.
6. Store unmixed materials in a cool (preferably temperature-controlled)
environment, avoiding exposure to direct sunlight.
7. Keep equipment cool, arranging shade protection if necessary. It is especially
important to keep cool those surfaces of the equipment, which will come into
direct contact with the material itself.
8. Try to avoid application during the hottest times of the day, and arrange temporary
shading as necessary.
9. Make sufficient material, plant, and labor available to ensure that the application is
a continuous process.
1. Surface Imperfections a. Blowholes b. Form tie rod/bolt holes, cone holds, and
voids
1.
1. Protective and Safety Equipment All workers Involved shall be equipped with
adequate PPE as stated below: a. Safety Helmet with Company Logo b. Safety
Boots c. High Visibility Vest d. Safety Goggles e. Face Mask f. Hand Gloves g.
Coveralls
IX. Attachments
References (attach here)
Documentation (attach here)
Project Specifications (attach here)
Appendices:
Appendix A-Material Technical Data Sheet (attach here)
Appendix B-Risk Assessment
Appendix C-Inspection and Test Plan