Download as pdf or txt
Download as pdf or txt
You are on page 1of 38

LISTENLIGHTS PVT LTD

Client Name BOM062 Date 03-MAY-22


SUBMITTAL NO- 77
Consultant Name AECOM Transmittal Ref No
PACKAGE NO- 364

Contractor Name Listenlights Pvt Ltd Consultant Transmittal Ref No

Project Name & Code PEACOCK ROMP06


Discipline : CIVIL
Subject: TDS for Approval
Sr No Document Number Document Name Rev Remarks
1 BOM062_LLPL_R6_TDS_C_1015 INJECTION MORTER R0

Received By For Sincerely,

Signatory Signatory
Technical (Product) Submittal
CLIENT : BOM062

PROJECT : PEACOCK

PROJECT CODE : ROMP06

SERVICE : CIVIL & ARCHITECTURE

SUBMITTAL REF NO. : BOM062_LLPL_R6_TDS_C_1015

DESCRIPTION OF ITEM : INJECTION MORTER

B.O.Q. REF. NO. : 06.DH.22.CS.120

SPECIFICATION REF. NO. :

CLAUSE NO. :

PROPOSED MAKE : HILTI HIT-RE 500 V3 Injection mortar


ENCLOSURES : List Of Makes
Compliance report
Specifications
Technical Datasheet
Product Catalouge
Referance ROMP05 TDS -BOM062_LL_ROMP05_C_TDS_10019
CONTRACTOR : Listenlights Pvt. Ltd.

SIGNATURE SIGNATURE
PREPARED BY: Bipin CHECKED BY: Mr. C. MURUGAN
DATE: 30/04/2022 DATE:30/04/2022

CONSULTANTS : AECOM INDIA PVT. LTD.

1.Please ensure that the base slab thicknesses for the rebar anchoring as well as the post
installed anchors meet the minimum requirements for base slab thicknesses as specified in the
manual.
2. All manufacturer recommendations to be followed without exception.

APPROVED BY : DATE:
05.DH.22.CS.120 CS 05 DATA_HALL ELECTRICAL_BATTERY_ROOM WALLS Square Meter 169.00

Masonry Walls / Partiotion walls


200mm AAC block Wall Sqm 18.00
WA1-50mm thick_Temporary Partition Wall out of
Sqm 151.00
Sandwhich Panels

Structural Steel for WA1 Wall MT 1.00

Qty of Yellow and Red zone corridor,


Internal Plaster Sqm 91.00
Electrical Room, Battery Room to be
consider here
Internal Wall Paint P-1 Sqm 2,076.00

SITC of L 100 x 75 x 12 mm MS Angle with paint finish


Rmt 84.00
on floor near block wall to proctect wall

Demolition of 200mm AAC block Wall_Battery Room Cum 9.00


Construction of 200mm AAC block Wall_Battery Room Sqm 27.00

06.DH.28.CS.120 CS 06 DATA_HALL DATA_HALL_AVENUE WALLS Square Meter 305.00

Masonry Walls / Partiotion walls


200mm AAC block Wall Sqm 305.00

Security mesh 10AWG (1/2in. X 1/2in) above 200mm


Sqm 72.00
thick Block Wall
Qty of Data Hall Avenue Area,, Cold Air
Plenum to be consider here Internal Plaster Sqm 609.00

Internal Wall Paint P-1 Sqm 1,149.00

SITC of L 100 x 75 x 12 mm MS Angle with paint finish


Rmt 62.00
on floor near block wall to proctect wall

06.DH.28.CS.173 CS 06 DATA_HALL DATA_HALL_AVENUE CEILINGS Square Meter 812.00

Qty of Data Hall Avenue Area, Cold Air Ceiling


Plenum to be consider here ACT-2- Suspended 600mm x 600 mm gypsum tile
Sqm 812.00
ceiling

TOTAL
SAME HAS APROVED IN PREVIOUS PHASE
LISTENLIGHTS PVT LTD

Client Name BOM062 Date 31-Jan-22

Consultant Name AECOM Transmittal Ref No BOM62_PH05_LL_C_TDS_T_023

Contractor Name Listenlights Pvt Ltd Consultant Transmittal Ref No

Prjoject Name & Code PEACOCK ROMP05


Discipline : CIVIL
Subject: TDS for Approval
Sr No Document Number Document Name Rev Remarks
1 BOM062_LL_ROMP05_C_TDS_10019 INJECTION MORTER R0

Received By For Sincerely,

Signatory Signatory
Technical (Product) Submittal
CLIENT : BOM062

PROJECT : PEACOCK

PROJECT CODE : ROMP05

SERVICE : CIVIL & ARCHITECTURE

SUBMITTAL REF NO. : BOM062_LL_ROMP05_C_TDS_10019

DESCRIPTION OF ITEM : INJECTION MORTAR

B.O.Q. REF. NO. : 05.DH.22.CS.120

SPECIFICATION REF. NO. :

CLAUSE NO. :

PROPOSED MAKE : HILTI HIT-RE 500 V3 Injection mortar


ENCLOSURES : List Of Makes
Compliance report
Specifications
Technical Datasheet
Product Catalouge

CONTRACTOR : Listenlights Pvt. Ltd.

SIGNATURE SIGNATURE
PREPARED BY: Bipin CHECKED BY: Mr. C. MURUGAN
DATE: 19/01/2022 DATE:19/01/2022

CONSULTANTS : AECOM INDIA PVT. LTD.

APPROVED BY : DATE:
05.DH.22.CS.120 CS 05 DATA_HALL ELECTRICAL_BATTERY_ROOM WALLS Square Meter 169.00

Masonry Walls / Partiotion walls


200mm AAC block Wall Sqm 18.00
WA1-50mm thick_Temporary Partition Wall out of
Sqm 151.00
Sandwhich Panels

Structural Steel for WA1 Wall MT 1.00

Qty of Yellow and Red zone corridor,


Internal Plaster Sqm 91.00
Electrical Room, Battery Room to be
consider here
Internal Wall Paint P-1 Sqm 2,076.00

SITC of L 100 x 75 x 12 mm MS Angle with paint finish


Rmt 84.00
on floor near block wall to proctect wall

Demolition of 200mm AAC block Wall_Battery Room Cum 9.00


Construction of 200mm AAC block Wall_Battery Room Sqm 27.00

06.DH.28.CS.120 CS 06 DATA_HALL DATA_HALL_AVENUE WALLS Square Meter 305.00

Masonry Walls / Partiotion walls


200mm AAC block Wall Sqm 305.00

Security mesh 10AWG (1/2in. X 1/2in) above 200mm


Sqm 72.00
thick Block Wall
Qty of Data Hall Avenue Area,, Cold Air
Plenum to be consider here Internal Plaster Sqm 609.00

Internal Wall Paint P-1 Sqm 1,149.00

SITC of L 100 x 75 x 12 mm MS Angle with paint finish


Rmt 62.00
on floor near block wall to proctect wall

06.DH.28.CS.173 CS 06 DATA_HALL DATA_HALL_AVENUE CEILINGS Square Meter 812.00

Qty of Data Hall Avenue Area, Cold Air Ceiling


Plenum to be consider here ACT-2- Suspended 600mm x 600 mm gypsum tile
Sqm 812.00
ceiling

TOTAL
SAME HAS APROVED IN PREVIOUS PHASE

You might also like