Professional Documents
Culture Documents
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
The data of the macro call by G code added by the embedded macro is set. G code
number and the macro program number for it are set, and the number of G codes is set.
These sets can be set up to ten. If G code number duplicates, it gives priority from former
set. The set that the G code number or the macro program number or numbers is 0 is
invalid.
[Example] In case that the range of macro program number is 7000 to 8999:
First group Second group Third group
G code No. 12020=100 No. 12023=150 No. 12026=900
Program number No. 12021=8000 No. 12024=7500 No. 12027=8300
Number No. 12022=10 No. 12025=5 No. 12028=30
NOTE
The parameter value is regarded as 0, when each parameter is set
a out of range value.
12202 Controlled axis for which the twelfth high-speed position switch function is performed
12203 Controlled axis for which the thirteenth high-speed position switch function is performed
12204 Controlled axis for which the fourteenth high-speed position switch function is performed
12205 Controlled axis for which the fifteenth high-speed position switch function is performed
12206 Controlled axis for which the sixteenth high-speed position switch function is performed
- 616 -