Professional Documents
Culture Documents
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Angle used to determine whether to assume the tool axis direction to be parallel to the normal direction
12322
(parameter No. 12321)
12323
Number of a manual handle used for 3-dimensional machining manual feed
NOTE
Don't change this parameter during 3-dimensional manual feed
mode.
12324 Start address of R area used with rotary axes position error compensation
Set the start address of R area in the PMC used with rotary axes position error
compensation.
In case parameter RCL(No.12319#3) = 0, a 30-byte area from the set address is
necessary.
In case parameter RCL(No.12319#3) = 1, a 60-byte area from the set address is
necessary.
- 624 -