Professional Documents
Culture Documents
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
SP = 1
PC = 1
E = 2.2 V
L = 360 deg
(Note) On the assumption that the spindle motor used turns at 4500 min-1 at 10 V, 2.2 V
is required to turn the spindle motor at 1000 min-1.
NOTE
These parameters are used for analog spindles.
NOTE
Set the following parameter for each spindle:
First spindle No. 5300
Second spindle No. 5302
Third spindle No. 5304
Fourth spindle No. 5306
NOTE
If an excessively large value is specified, the threading precision
will deteriorate.