Professional Documents
Culture Documents
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
Chine Systems Inc Rob Zahensky FR Yer Ma Chine Systems Inc Rob Zahensky
DESCRIPTION OF PARAMETERS
[Data type] Word axis
[Unit of data] Detection unit
[Valid data range] 0 to 32767
This parameter sets a tapping axis in-position width when rigid tapping is performed
using the third spindle.
If the setting value is negative value, in-position check is not completed.
5310 Positional deviation limit imposed during tapping axis movement in rigid tapping (first spindle)
NOTE
Set the following parameter for each spindle:
First spindle No. 5310
Second spindle No. 5350
Third spindle No. 5354
Fourth spindle No. 5358
5311 Limit value of spindle positioning deviation during movement in rigid tapping
- 307 -