Professional Documents
Culture Documents
Utp Af A7
Utp Af A7
Application field
The self-shielded open-arc wire UTP AF A7 is used mainly for tough, crack resistant buffer
layers and for build up prior to hard surfacings tending to hardness crack. Welding of cracks
on high tensile steels and on cast steel and joints on Mn-steel and wear plates are possible.
Universally applicable for corrosion and scale resistant, work-hardened and easy machinable
cladding on non- and low-alloy steels.
C Mn Cr Ni
0,1 6,5 19 8,5
Welding instruction
Clean welding area. Preheat massive pieces and high tensile steel to min. 250°C. Use
dragging welding technique and 25 – 30 mm wire stick-out.
Rev. 0 / BK / 08.2008 TA
The data which are given here are based upon careful investigation and intensive research. However, we cannot assume any
liability for the use of our products out of the above-mentioned field of application. We recommend the user to test – on his own
responsibility – our products with regard to their special application.