Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

1.

Steel strength of anchor in shear


Vu = the maximum lower anchor close to edge = 31883 N
Vs =Asefuta = 37564 N for cast-in headed stud anchor / futa shall not be taken greater than the smaller of 1.9fya and 860 Mpa
n = 2 bolts number of anchor in a group
Vs = 24417 N >15941.25 OK in single
Vs = 48833 N >31882.5 OK in group
( Plan of 2-bolt group )
2.Concrete breakout strength of anchor in shear
Vcb = Avc/Avco ed,V c,V Ψh,V Vb in single
Vcb = Avc/Avco Ψec,V ed,V c,V Ψh,V Vb in Groups 225.0 225 225.0
e v' = 0 mm eccentricity ( ** in case of no eccentric = 0)
Vu,max,1 stud = 15941.3 N Maximum shear force of single bolt in group = Vu/n + Vu x ev'/[2xS]
Avc = 88200 mm^2 Projected concrete failure area of one anchor . Top beam edge
Avc = 135450 mm^2 Projected concrete failure area of group anchor .
Avco = 88200 mm^2 Vu
ca1 = 198 mm Distance of anchor to edge in paralle of shear force direction. 602
ca1' = 140.0 mm
Ca2,min = 210 mm. min distance of anchor to edge in perpendicular of shear force direction.
ca2,max = 210 mm max distance of anchor to edge in perpendicular of shear force direction.
ha = 203.2 mm Thickness of concrete which an anchor is anchord mesure in pararell to anchor axis 198.0
le= 140 mm <= le > 8 do No OK bottom beam 
do = 16 mm <= do out side diameter of anchor , or hooked bolts
ψ ec,V = 1.00 <= Eccentricity of shear force on a group of anchor ( unit; MM)

Edge
ψ c,V = 1.40 Ca1
Ca1
ψ ed,V = 1.00
 h,V = 1.02
in case = 1 <= for Have main bar dia < No13 in pedestal = 1,

1.5 Ca1 1.5 Ca1
for Have main bar dia > No13 in pedestal = 2,

1.5 Ca1
Vu
for Have main bar dia > No13 + strriup spacing< 100mm in pedestal = 3,

The basic concrete breakout strengthin sher of single shear ( Section of bolt group subject shear force)
min[ Vb =0.6(le/do)^0.2 d0^0.5 fc'^0.5 ca1^1.5 , 3.7*fc'^0.5 ca1^1.5] le=hef for anchors with a constant stiffness over full length of embeded section ( Plan)
Vb = 27409.98 N le = 2do for torque-controlled expansion anchors with a distance sleeve seperated from expansion sleeve
Vcb = 29258 N >15941.25 OK in single
Vcbg = 44932 N >31882.5 OK in group

You might also like